UNKNOWN

FEED

Troubleshooting, diagnosing, and repairing commercial HVAC equipment such as chillers, and/or ancillary supporting components such as pumps, cooling towers, etc., split systems, package units, and boilers. Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision .

Engineering Excellence National Account

Commercial HVAC Service Technician III

sourcestack_via_bold

Also, on the beautiful hospital campus, located at the intersection of Interstate 45 and Texas State Highway 242, are two medical office buildings, which include a Breast Care Center; Cancer Center; infusion center; heart and vascular services; neurology; orthopedics and sports medicine; rehabilitation services; wellness services; an outpatient laboratory; and several other multispecialty physician practices. At Houston Methodist, the Sterile Processing Technician position is responsible for decontamination, assembly, inspection, wrapping, and sterilization of surgical instruments and medical equipment for Surgical Services and all ancillary departments, which includes working in conjunction with the Operating Room (OR) staff to provide timely sterile products, trays, and case carts where applicable.

Houston Methodist Hospital

Sterile Processing Technician

linkup_via_bold

Repair or replace defective parts in units and equipment and their controls,including thermostats, automatic switches, fan controls, log switches, dampermotors, louvers, relays, filters, controls, belts, compressors, heat exchangers, highlimit controls, pressure controls, safety valves, and automatic gas valves. Inspect, repair, modify and install HVAC equipment including refrigeration and air conditioning compressors, receivers, condensers, chillers, water cooling towers, forced air converter units, pumps, automatic and hand valves, expansion valvesand capillary tubes.

Xtra handy Property maintenance

Maintenance Technician

ea_via_bold

FULL_TIME

OTHER

Position Overview: The NDT Technician is responsible for the inspection of materials, structures, and assets by using non-destructive testing techniques to examine structures for flaws and structural weaknesses. Ability to wear required personal protective equipment (PPE), including hard hats, safety glasses, hearing protection, respirators, gloves, fall-protection systems, and flame-resistant clothing.

NDT Technician

equestftpin

Certifications: NDT Level 2 UT, NDT Level 2 MT and NDT Level 2 PTPreferred additional certifications: NDT Level 2 UT Shear WaveCWI Certification preferredExceptional attention to detail and observational skills. Position Overview: The NDT Technician is responsible for the inspection of materials, structures, and assets by using non-destructive testing techniques to examine structures for flaws and structural weaknesses.

Exo Group, LLC

Key Responsibilities: Vehicle Operation: Safely operate a heavy tractor-trailer combo rig with a capacity of 40,000 pounds Gross Vehicle Weight (GVW) (F-350 with a 40' pole trailer), according to established routes and schedules. Hearing: Adequate hearing is necessary for CDL drivers to perceive auditory signals, such as horns or sirens, and communicate effectively with others, especially in noisy environments or when operating vehicles with air brakes.

CDL Driver / Pole Replacement Technician

Key Responsibilities: Vehicle Operation: Safely operate a heavy tractor-trailer combo rig with a capacity of 40,000 pounds Gross Vehicle Weight (GVW) (F-350 with a 40 pole trailer), according to established routes and schedules. Hearing: Adequate hearing is necessary for CDL drivers to perceive auditory signals, such as horns or sirens, and communicate effectively with others, especially in noisy environments or when operating vehicles with air brakes.

Operate, maintain, and troubleshoot air handling units serving classified and unclassified spaces, including supply and return fans, VFDs, chilled water and hot water coils, reheat, humidification, dehumidification, economizers, and control and isolation dampers. Perform refrigeration maintenance and repair on DX systems, split systems, condensing units, and chilled water equipment, including compressor, metering device, and refrigerant circuit troubleshooting using superheat and subcooling analysis.

Immatics N.V.

Facilities Technician II

Facilities Technician II, Hvac

Inspect, service, repair, and conduct predefined preventative maintenance for various plant equipment, including pumps, compressors, air dryers, valves, and rotating machinery. Service storage tanks, vessels, cooling towers, steam heating systems, and high-pressure systems, ensuring they are functioning properly and safety compliant.

Avril SCA

MAINTENANCE TECHNICIAN

Oleon NV

Completes basic performance testing and setup of installed services, including PC, Local Area Network, and Voice over Internet Protocol telephone equipment, ensuring optimal functionality and customer satisfaction. As a Field Service Technician, you will be responsible for delivering high-quality installation, repair, and maintenance services for our telecommunications products and services.

Rise Broadband

Technician, Field Service

The HVAC Technician will perform preventative and corrective maintenance, and general installation of all types of HVAC equipment including boilers, chillers, cooling towers, air handing units, fan coil units, direct expansion units, chilled and hot water pumps, condensate units, steam traps, heat exchangers, exhaust fans, fume hoods, water heaters, coolers, freezers, ice machines, and associated motors. Under the guidance of the Executive Director, Facilities and Director, Physical Plant, this position will maintain heating, ventilating, air conditioning, and refrigeration systems in facilities on and off main campus.

YEAR

Lee College

HVAC Technician

The Load Bank Technician is responsible for operating, maintaining, troubleshooting, and testing load bank equipment used to verify the performance and reliability of generators, UPS systems, and other power generation equipment. Connect and disconnect load bank cables, power connections, control wiring, and monitoring equipment safely.

HVAC RNTL

Load Bank Technician

Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc. We are seeking an experienced Lead Data Center Technician with advanced technical skills and the ability to layout and install all Mission Critical equipment independently, with little to no direction.

Lead Data Center Technician

As Operations Technician I-II, you'll perform a variety of tasks, including reading and interpreting drawings, supporting pipeline operations, safely maintaining facility equipment and analyzing data to resolve technical and operational problems. Education/Years of Experience: Required: High School Diploma/GED and minimum two (2) years' related experience and minimum of one (1) year experience as a technician in the oil and gas industry.

The Williams Companies Inc

Operations Technician II

As a Koch Engineered Solutions company, Koch Specialty Plant Services (KSPS) provides code welding work related to repair, revamp, replacement and field fabrication of towers and vessels, piping and specialty welding, mass transfer equipment installation, inspection and professional project services. Must be able to perform work wearing personal protective equipment including but not limited to rain gear, chemical, protective clothing, supplied air and air purifying respirators, safety harness, FRC coveralls, hard hat, ear plugs and safety glasses, etc.

Koch Specialty Plant Services

Safety Technician

Minimum one (1) year technical wind industry experience, OR six (6) months technical wind industry experience and a certificate of completion from a Wind Technician program, OR in absence of technical wind industry experience, minimum three (3) years' experience working with hydraulic, electrical, mechanical skills and/or composite skills. Independently initiates and performs most work tasks as well as follows defined instructions and maintenance schedules, executing plans as directed and performs according to written and verbal instruction from higher level technical staff.

Sparrows Offshore, LLC

Wind Turbine Technician

HiringThing

As a technical authority during startup, this individual may be called upon to coordinate with construction teams, subcontractors, equipment vendors, controls providers, commissioning agents, design professionals, and the owner to deliver safe, reliable, and fully operational systems. This position ensures that applicable mechanical and controls systems are installed, tested safely and in accordance with design intent, applicable codes, project specifications, and owner requirements.

Hunton Group Inc

Startup and Warranty Technician

Safety Technician - Houston, Texas, United States - 195537 - Koch. Join our Talent Community.

Tower Technician Jobs in The Woodlands, TX

Commercial HVAC Service Technician III Engineering Excellence National Account

Sterile Processing Technician Houston Methodist Hospital

Maintenance Technician Xtra handy Property maintenance

NDT Technician EXO

NDT Technician Exo Group, LLC

CDL Driver / Pole Replacement Technician EXO

CDL Driver / Pole Replacement Technician Exo Group, LLC

Facilities Technician II Immatics N.V.

Facilities Technician II, Hvac Immatics N.V.

MAINTENANCE TECHNICIAN Avril SCA

MAINTENANCE TECHNICIAN Oleon NV

Technician, Field Service Rise Broadband

HVAC Technician Lee College

Load Bank Technician HVAC RNTL

Lead Data Center Technician HVAC RNTL

Operations Technician II The Williams Companies Inc

Safety Technician Koch Specialty Plant Services

Wind Turbine Technician Sparrows Offshore, LLC

Startup and Warranty Technician Hunton Group Inc

Safety Technician Koch Inc

Similar Job Searches

See More Jobs

Stand out to leading employers.