UNKNOWN

FEED

Working closely with government sponsors, industry partners, and internal engineering teams, the Senior Systems Engineer will define system architectures, manage technical risk, develop verification strategies, and ensure engineering decisions are supported by analytical and experimental evidence. Working with sponsors including NASA, the Department of Defense, the Department of Energy, and commercial industry, our multidisciplinary teams research, design, prototype, test, and qualify novel space power systems capable of operating in some of the harshest environments ever encountered.

The University of Dayton is a top-tier Catholic, Marianist research university deeply committed to the common good. Our faith is a beacon that guides us – and leads us to act. We value building community and invite people with diverse talents, interests and backgrounds to enrich and advance our common mission. Together, we’re passionately striving to create a brighter tomorrow.

University of Dayton, Ohio

Lead Systems Engineer – Team Leader

University of Dayton

Lead Systems Engineer - Team Leader

Our engineers are focused and challenged on developing new technologies and delivering state of the art products such as hybrid electric power systems, the latest military power platforms, and highly efficient legacy / commercial AC power systems as seen on the F-18 and the new Boeing 777X. Experience with large, complex test equipment, including thermal chambers, oil carts, chillers, data acquisition systems, cDAQ / PXI systems, pressure controllers, digital multimeters, oscilloscopes, and other common lab/test instruments.

GE Aerospace.

Lead Testing Engineer

Complete a variety of trainings to learn the GEA sales business, including hands-on technical training at customer sites/other, classroom settings, remote and in person trainings at European centers of competence, and independent learning through GEA's Learning Center portal. The Application Engineer is responsible for generating precise cost estimates and articulating proposals for a diverse range of GEA equipment, services, and systems, collaborating with departments such as Procurement, Contract Management, Sales, Project Management and Engineering.

GEA Group AG

Application Engineer PTS Sanitary

All associates working on the production floor may be required to wear a respirator at any given time and thus, the ability to wear a respirator is a condition of employment and continued employment (requires little or no facial hair). Education/Experience: Candidates must meet onCandidate's must meet one of the following criteria to qualify: Associate's Degree in an engineering or similar technical discipline combined with.

YEAR

FIRST SOLAR INC

Engineer- Manufacturing I USA (Deposition)

ea_via_bold

All associates working on the production floor may be required to wear a respirator at any given time and thus, the ability to wear a respirator is a condition of employment and continued employment (requires little or no facial hair). Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, protective jacket or apron and arm guards).

First Solar Inc

Engineer- Manufacturing I USA

FOR ANY FULLY REMOTE US ROLES OR ANY ROLES THAT ARE OR COULD BE LOCATED IN COLORADO ADD the date that you anticipate to close the application window (THIS DATE CAN BE EXTENDED BUT NOT UPDATED TO EARLIER; EXAMPLE: 26-JAN-24 COULD BE EXTENDED TO 31-JAN-24 BUT CAN NOT BE MOVED UP TO 24-JAN-24)- THESE INSTRUCTIONS NEED TO BE DELETED PRIOR TO POSTING; USE THE BELOW ONLY IF THE ABOVE CRITERIA IS MET ON THIS REQUISITION. Work closely with Program and Project Management, Field Service Engineers, Product Engineering, Supplier Chain Management, Operations and other cross‑functional partners in the execution of projects/programs.

Eaton is a power management company with 2016 sales of $19.7 billion. We provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technologies and services. Eaton has approximately 95,000 employees and sells products to customers in more than 175 countries. For more information, visit <a href="http://www.eaton.com/Eaton/index.htm" target="_blank">Eaton.com.</a>

Eaton Corporation

Project Quality Engineer

Your Day to Day as a Desing Engineering Intern: The Design Stress Engineer Intern's main assignments will be to support the design team perform stress analyses of nuclear pressure vessels and other highly engineered products. Work with members of other engineering disciplines (manufacturing, quality, welding, drafters, thermal fluids, etc.) in a team environment to generate component designs to meet code requirements and to optimize the design for manufacturability.

At BWX Technologies, Inc. (NYSE: BWXT), we are People Strong, Innovation Driven. Headquartered in Lynchburg, Virginia, BWXT is a Fortune 1000 and Defense News Top 100 manufacturing and engineering innovator that provides safe and effective nuclear solutions for global security, clean energy, environmental restoration, nuclear medicine and space exploration. With approximately 6,700 employees, BWXT has 14 major operating sites in the U.S., Canada and the U.K. We are the sole manufacturer of naval nuclear reactors for U.S. submarines and aircraft carriers. Our company supplies precision manufactured components, services and fuel for the commercial nuclear power industry across four continents. Our joint ventures provide environmental restoration and nuclear operations management at more than a dozen U.S. Department of Energy and NASA facilities. BWXT’s technology is driving advances in medical radioisotope production in North America and microreactors for various defense and space applications. Follow us on Twitter at @BWXT and learn more at <a href="http://www.bwxt.com">www.bwxt.com</a>.

BWX Technologies Inc

Design Stress Engineer Intern

Serving two primary markets - passenger vehicle and commercial truck - Dana provides the world's original-equipment manufacturers and the aftermarket with local product and service support through a network of nearly 100 engineering, manufacturing, and distribution facilities. Dana is a global leader in the supply of highly engineered driveline, sealing, and thermal-management technologies that improve the efficiency and performance of vehicles with both conventional and alternative-energy powertrains.

Dana Corporation

Lead Weld Engineer

Ability to wear personal protective equipment is required (including but not limited to; steel-toed shoes, gloves, safety glasses, hearing protection, protective jacket or apron and arm guards, and a condition of employment and continued employment (requires little or no facial hair) for those requiring respirator use. Required Skills/Competencies: Technical expert and innovator in one area computer-aided analysis (thermal, multi-species gas flow, and chemical reaction preferred); experience on photovoltaic processes and/or equipment development is a plus.

Engineer- Development III USA

Leverages expertise in one or more coatings and surface engineering areas, such as thermal spray (HVOF, plasma, cold spray), electron beam physical vapor deposition (EB-PVD), diffusion/aluminide coatings, slurry and sol-gel coatings, thermal barrier coatings (TBCs), environmental barrier coatings (EBCs), plating, and other surface treatments. In this role, you will drive design for manufacturing readiness, producibility, reduce manufacturing cost and risk, and ensure our suppliers along with internal GE shops can deliver safely, on quality, on time, and at cost - with a specific focus on coatings and surface engineering technologies.

Lead Manufacturing Engineer - Coatings Manufacturing Readiness

What You Will Do: Lead Structural Design & Analysis: Drive civil/structural engineering for site modifications, performing complex analyses for static and dynamic loads, including wind, seismic, vibration, and thermal effects-to verify structural capacity for new and existing systems. In addition, once employed, employees will become part of a random drug testing program and may also be tested in the event of any incident causing injury or causing damage to property, or if it is determined that there is a reasonable suspicion the employee is under the influence of drugs or alcohol.

Centrus Energy Corp

Sr. Civil/Structural Design Engineer

This position will be responsible for leading projects involving spec bench testing of hardware, HIL testing, HIL system development, and tuning both on HIL and on vehicle. A successful candidate will be proficient at independently perform testing and tuning work and able to work collaboratively with US and JPN power steering teams.

Astemo Ltd

DE Test Engineer

The engineer will utilize advanced Computer Aided Engineering (CAE), Computational Fluid Dynamics (CFD), and structural Fine Element Analysis (FEA) tools for designing and analyzing bushing components, glass delivery systems, and their operation including the overall fiberizing environment. The primary responsibility of the Bushing Design Engineer is to design fiber forming bushings, supporting components, the fiberizing process and provide operational support to our global glass manufacturing facilities.

Original Composites and Fibers

Bushing Design Engineer

Working across mechanical, electrical, thermal, and fluid systems disciplines, the Senior Systems Engineer partners closely with project management, production, and manufacturing teams to keep the product on schedule, while also providing technical mentorship to less experienced members of the engineering team, with the ability to step into hands-on design work directly when needed. The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication of parts at distances close to the eyes.

Hyliion Holdings Corp

Senior Engineer, Systems Engineering

This engineer builds the control plans, inspection criteria and process data that keep good parts coming off the line, and is a technical quality contact for assigned customers. Analyze scrap, reject and process data (SPC, Pareto, capability studies) and lead projects that reduce defects and cost of poor quality.

Astro Shapes LLC

Quality Process Engineer

The Product Engineer works cross‑functionally with Product Management, Systems Engineering, Manufacturing, Supply Chain, Sales, and Quality teams to ensure solutions meet customer expectations for performance, reliability, serviceability, and scalability. 7-15 years of experience in product engineering, systems engineering, or new product development, preferably within IT infrastructure, data center, or industrial equipment environments.

Vertiv Holdings, LLC

Sr. Product Engineer - Electrical

Ability to read, analyze, and interpret engineering drawings, technical policies and recommend changes to procedures; effectively communicate and present information to team members, team leaders, and top management; respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to work on a variety of technical problems of diverse scope and complexity where analysis and evaluation of various outcomes require tradeoffs; solve a wide range of difficult problems in imaginative and practical ways and evaluate alternative solutions that may require coordination across multiple teams.

Triumph Group, Inc. designs, engineers, manufactures, repairs and overhauls a broad portfolio of aerostructures, aircraft components, accessories, subassemblies and systems – providing integrated solutions for the global aerospace market. The company serves a broad, worldwide spectrum of the aviation industry, including original equipment manufacturers of commercial, regional, business and military aircraft and aircraft components, as well as, commercial and regional airlines and air cargo carriers. Triumph is comprised of 45 highly specialized manufacturing companies, operating at 64 locations worldwide. The company is organized into three groups: Aerostructures, Aerospace Systems and Aftermarket Services.

Triumph Group Inc

Engineer, AME 2

Serving two primary markets - passenger vehicle and commercial truck equipment - Dana provides the world's original-equipment manufacturers and the aftermarket with local product and service support through a network of nearly 100 engineering, manufacturing, and distribution facilities. Participate in cross-functional teams to develop PFMEAs, control plans, and work instructions, utilizing risk assessments to ensure process controls deliver continuous improvement and customer satisfaction.

Metrology Engineer

Working fluency in the physics and engineering of aero engines and turbomachinery, aerodynamics, combustion, heat transfer, structures and rotordynamics, and materials, with the judgment to tell where a model is physically credible; hands on familiarity with CFD, FEA, and thermal/structural simulation, engine and rig test data, surrogate and physics informed modeling, model based systems engineering, the digital thread, and PLM. Lead others to find creative solutions within complex, interdependent engineering and production processes with technical variety, turbomachinery design, analysis, and test cycles, employing sophisticated operational / product management, manufacturing, and engineering techniques, drawing on multiple internal and external resources and questioning conflicting data to arrive at decisions.

Thermal Engineer Jobs in Ohio

Lead Systems Engineer – Team Leader University of Dayton, Ohio

Lead Systems Engineer - Team Leader University of Dayton

Lead Testing Engineer GE Aerospace.

Application Engineer PTS Sanitary GEA Group AG

Engineer- Manufacturing I USA (Deposition) FIRST SOLAR INC

Engineer- Manufacturing I USA First Solar Inc

Project Quality Engineer Eaton Corporation

Design Stress Engineer Intern BWX Technologies Inc

Lead Weld Engineer Dana Corporation

Engineer- Development III USA First Solar Inc

Lead Manufacturing Engineer - Coatings Manufacturing Readiness GE Aerospace.

Sr. Civil/Structural Design Engineer Centrus Energy Corp

DE Test Engineer Astemo Ltd

Bushing Design Engineer Original Composites and Fibers

Senior Engineer, Systems Engineering Hyliion Holdings Corp

Quality Process Engineer Astro Shapes LLC

Sr. Product Engineer - Electrical Vertiv Holdings, LLC

Engineer, AME 2 Triumph Group Inc

Metrology Engineer Dana Corporation

Principal Build & Release Engineer GE Aerospace.

Similar Job Searches

Stand out to leading employers.