RFIC Thermal Engineer FalcommRFIC Thermal EngineerAtlanta, GATo conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. The position requires collaboration with RFIC designers, packaging engineers, and system teams to ensure devices operate reliably under demanding performance conditions.
NewNuclear Thermal-Hydraulic Engineer Enercon Services IncNuclear Thermal-Hydraulic EngineerKennesaw, GA$90,000–$190,000 / yearContainment/Habitability and Environmental Qualification Analysis: Perform steady-state and transient thermal-hydraulic analysis of high energy line breaks, containment response, perform flooding analysis, develop environmental qualification profiles, and perform control room habitability/HVAC performance evaluations. This role is in support of the multi-disciplinary Engineering & Safety Analysis team, which supports radiological, mechanical, thermal-hydraulic, chemical, and meteorological assessments of new and existing nuclear facilities, structures, systems, and components.
Nuclear Thermal-Hydraulic Engineer Enercon Services, Inc.Nuclear Thermal-Hydraulic EngineerKennesaw, Georgia$90,000–$190,000 / yearFull timeContainment/Habitability and Environmental Qualification Analysis: Perform steady-state and transient thermal-hydraulic analysis of high energy line breaks, containment response, perform flooding analysis, develop environmental qualification profiles, and perform control room habitability/HVAC performance evaluations. This role is in support of the multi-disciplinary Engineering & Safety Analysis team, which supports radiological, mechanical, thermal-hydraulic, chemical, and meteorological assessments of new and existing nuclear facilities, structures, systems, and components.
Managing Engineer Thermal Sciences (MS/PhD) Exponent IncManaging Engineer Thermal Sciences (MS/PhD)Atlanta, GA$150,000–$220,000 / yearA minimum of 5 years of relevant industry experience in the areas of plant engineering design, commissioning, and maintenance; process safety and risk assessment; engineering in in-plant organization team leadership, and/or in a client-facing technical consulting role, working on projects related to any or all of these technical areas. Your work will involve safety management, failure analysis, and root cause analysis for complex issues in multiple industries including industrial manufacturing, power generation, chemical, oil, and gas production, LNG, and new plant construction projects.
Project Manager-Thermal Generation Stantec IncProject Manager-Thermal GenerationAtlanta, GAIn this role you will support our culture of internal and external client service, build our strength in understanding and anticipating client needs and expectations, execute strategies to advance the client's project objectives and manage risk, establish priorities, promote alignment the project team, and resolve emergent problems. Primary Location: United States | TX | Houston Other Locations: United States | GA | Atlanta Organization: BC-2308 E&R-US Southwest Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 07/07/2026 12:07:43 Req ID: 1006508.
NewLead PM, Thermal Generation & Energy Projects StantecLead PM, Thermal Generation & Energy ProjectsAtlanta, GAStantec's Energy & Resources group seeks a seasoned Project Manager to lead multi-discipline teams on thermal generation projects in North America, serving as seller-doer to help win work and deliver owner's engineer or detailed design services for simple cycle, combined cycle, and repowering initiatives. You will guide project execution, manage risk, ensure schedule, budget, and quality, and mentor staff across offices while expanding client relationships.#J-18808-Ljbffr.
Mechanical Engineer, Cooling System Modular Design Google LLCMechanical Engineer, Cooling System Modular DesignAtlanta, GAFrom software to hardware our teams are shaping the future of world-leading hyperscale computing, with key teams working on the development of our TPUs, Vertex AI for Google Cloud, Google Global Networking, Data Center operations, systems research, and much more. We"re the driving force behind Google"s groundbreaking innovations, empowering the development of our cutting-edge AI models, delivering unparalleled computing power to global services, and providing the essential platforms that enable developers to build the future.
Mechanical Engineer EndeavourMechanical EngineerAtlanta, GeorgiaWe are seeking a Mechanical Engineer to join a dedicated engineering team responsible for the mechanical packaging, structural design, thermal-fluid management, and commercial release of high-power, grid-connected converters for utility-scale energy storage, data centers, and industrial electrification. Working in a collaborative, concurrent engineering environment, you will partner with electrical, firmware/controls, compliance, reliability, and manufacturing teams, as well as external suppliers, to transition complex novel physical designs into robust, production-ready platforms.
Senior Mechanical Engineer-Cooper Lighting Solutions Signify Holding B.V.Senior Mechanical Engineer-Cooper Lighting SolutionsPeachtree City, GA$130,437–$202,200 / yearWhile we value and appreciate all applicants, we believe that the following experience and skills will be needed to shine brightly in this job opening: Bachelor's degree in Mechanical Engineering, or a closely related field and 5+ years of related experience required. Experience must include the following: 5+ years of experience in product design with lighting fixtures; 5+ years of experience with SolidWorks 3-D modeling software; 3+ years of experience working with Thermal and Structural simulations.
Senior Mechanical Engineer I OXOS Medical IncSenior Mechanical Engineer IAtlanta, GAYou''ll define enclosures and battery envelopes, and you''ll give the EEs concrete feedback (board outline, screw and plated-through-hole placement, layer stackup) to make boards fit, hold tolerances, and manage heat and vibration. Strong knowledge of manufacturing processes, injection molding especially, plus sheet metal, CNC machining, laser cutting, and 3D printing, with the ability to drive DFM decisions.
Senior Mechanical Engineer - District Utilities Wiley|WilsonSenior Mechanical Engineer - District UtilitiesAtlanta, GAAtlanta, GA, District Utilities, District Energy, Steam Systems, Hot Water Systems, Chilled Water Systems, Mechanical Engineering, PE License, Infrastructure Design, System Optimization, Field Investigations, Technical Leadership, Engineering Analysis, Utility Networks, Decarbonization, Sustainable Energy Solutions, Geothermal. Furthermore, we prioritize inclusivity with benefits such as 80 hours of parental leave for the birth of a child or newly adopted child, a hybrid work schedule to accommodate various needs, and for roles requiring travel, we ensure accommodations for individuals with disabilities.
Mechanical Engineer (56486) DataPath IncMechanical Engineer (56486)Duluth, GAThe role includes mechanical design, electromechanical packaging and layout, Root Cause Corrective Action (RCCA) investigation/support, design analysis, documentation generation, and participation throughout the entire product lifecycle from concept through sustainment. Perform electromechanical assembly layout and integration activities including enclosure design, component packaging, cable routing considerations, thermal management, access/serviceability, and manufacturing accommodation.
Mechanical Engineer - ATL AMETEK IncMechanical Engineer - ATLSuwanee, GAJob Summary: We are looking for a highly skilled mechanical engineer to lead the development of mechanical products, taking full responsibility for all phases of the project-including design, analysis, documentation, factory integration, and on-site installation. Due to the nature of NSI-MI Technologies' programs and products, applicants must have the legal right to work in the U.S. and additionally must be legally authorized to access export-controlled information and source code.
Mechanical Engineer Hermeus CorpMechanical EngineerAtlanta, GA$90,000–$140,000 / yearOwn R&D-focused structural design and development supporting vehicle subsystems such as hydraulics, fuel systems, propulsion, and avionics with an emphasis on rapid prototyping and iteration • Perform first-principles structural and thermal analyses using hand calculations and FEA to inform early design decisions and experimental validation • Execute trade studies across mechanical, fluid, and avionics subsystems focused on performance, mass efficiency, and technical risk reduction • Design, build, and test prototype hardware, owning development from concept through fabrication, integration, and experimental validation • Collaborate closely with manufacturing and test teams to transition prototype concepts toward scalable production-aware designs • Support hands-on integration, troubleshooting, and test campaigns to quickly iterate and mature hardware • Present technical findings in internal design reviews and contribute to cross-functional and supplier/customer technical discussions. • Bachelors degree in mechanical engineering, aerospace engineering, or physics • 2 years of experience in mechanical design, analysis, and experimental testing, internships, and significant student project experience (qualifying preferably in an R&D or prototype environment).
Mechanical - Senior Engineer (District Utilities) Wiley and Wilson IncMechanical - Senior Engineer (District Utilities)Atlanta, GAAtlanta, GA, District Utilities, District Energy, Steam Systems, Hot Water Systems, Chilled Water Systems, Mechanical Engineering, PE License, Infrastructure Design, System Optimization, Field Investigations, Technical Leadership, Engineering Analysis, Utility Networks, Decarbonization, Sustainable Energy Solutions, Geothermal. Furthermore, we prioritize inclusivity with benefits such as 80 hours of parental leave for the birth of a child or newly adopted child, a hybrid work schedule to accommodate various needs, and for roles requiring travel, we ensure accommodations for individuals with disabilities.
Mechanical Engineer Universal AvionicsMechanical EngineerDuluth, GeorgiaModern Engineering Environment-- our onsite engineering teams work in a collaborative environment designed for technical innovation, rapid problem solving, and cross-functional teamwork. For over 40 years, Universal Avionics has been a trusted innovator in aerospace technology, supporting commercial airlines, business aviation, cargo operations, and special mission aircraft around the globe.
Mechanical Engineer II Affiliated Engineers, Inc.Mechanical Engineer IIDecatur, GAAEI consistently earns national recognition from leading industry publications, including Building Design+Construction, Engineering News-Record, and Consulting-Specifying Engineer, with distinctions such as being named the #1 Laboratory Engineering Firm in the nation and receiving multiple Best of the Best Project awards, underscoring the lasting legacy of our work. As a Mechanical Engineer II in our Atlanta office, you will help us empower our clients to achieve energy-efficient building solutions, save global environments, and create a better, greener future for all.
Staff Data Center Mechanical Engineer Google LLCStaff Data Center Mechanical EngineerAtlanta, GAhomehomeHomeHomework_outlinework_outlineJobsJobsnoogler_hatnoogler_hatStudentsStudentsgooglegoogleHow we workHow we workhandymanhandymanHow we hireHow we hireperson_outlineperson_outlineYour careerYour careerhelp_outlineHelp linkfeedbackSend feedbackmore_vert HelpSend FeedbackSign inCareersCareershomeHomework_outlineJobsexpand_morenoogler_hatStudentsexpand_moregoogleHow we workexpand_morehandymanHow we hireexpand_moreperson_outlineYour careerexpand_morejob detailsarrow_backBack to jobs searchJobs search results3653 jobs matched. Staff Data Center Mechanical Engineershare linkCopy linkemailEmail a friendcorporate_fareGoogleplaceSan Francisco CA USA Atlanta GA USA 6 more 5 morelaptop_windowsRemote eligiblebar_chartMidMidExperience driving progress solving problems and mentoring more junior team members deeper expertise and applied knowledge within relevant area.
NewMechanical Engineer (Facilities) - Mid Level (Georgia) U.S. Department of DefenseMechanical Engineer (Facilities) - Mid Level (Georgia)Atlanta, GA$105,262–$153,082 / yearWith a degree in a related field (for example, Construction Engineering, General Engineering, Architectural Engineering, Computer Science, Physics, Electronics, Chemistry, Architecture, Mathematics, Hydrology, and Geology) entry is with a Bachelors degree plus 4 years of relevant experience, or a Masters degree plus 2 years of relevant experience, or a Doctoral degree plus 1 year of relevant experience. With the ever-changing industry and increase of technology complexities to accommodate our workforce, NSAs Installation & Logistics organization needs motivated Mechanical Engineers to provide facilities design expertise, guidance, and support to the development and implementation of facilities solutions that enable capabilities that align with mission driven priorities.
NewMechanical Engineer Facilities - Mid Level Georgia National Security AgencyMechanical Engineer Facilities - Mid Level GeorgiaFort Gordon, GA$105,262–$153,082 / yearWith a degree in a related field (for example, Construction Engineering, General Engineering, Architectural Engineering, Computer Science, Physics, Electronics, Chemistry, Architecture, Mathematics, Hydrology, and Geology) entry is with a Bachelor's degree plus 4 years of relevant experience, or a Master's degree plus 2 years of relevant experience, or a Doctoral degree plus 1 year of relevant experience. With the ever-changing industry and increase of technology complexities to accommodate our workforce, NSA's Installation & Logistics organization needs motivated Mechanical Engineers to provide facilities design expertise, guidance, and support to the development and implementation of facilities solutions that enable capabilities that align with mission driven priorities.
Mechanical Engineer - Antenna Systems Viasat, Inc.Mechanical Engineer - Antenna SystemsDuluth, Georgia$120,500–$190,000 / yearFull timeFor specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $149,500.00- $224,500.00/ annually: At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. You will design, improve, and sustain precision positioning systems—including motors, gearboxes, gearing, and encoders—as well as electromechanical RF structures such as reflectors, feeds, and flat panel arrays, with a focus on reliability and customer success.
Mechanical Design Engineer Power PartnersMechanical Design EngineerAthens, GeorgiaFull timeElectric Research and Manufacturing Cooperative, Inc. (ERMCO) is the leading manufacturer of distribution transformers and engineered electrical solutions, serving electric utilities, Original Equipment Manufacturers (OEMs), and industrial customers across North America. Collaborate with cross-functional teams, including manufacturing, quality assurance, supply chain, sales, and customer service to ensure successful integration of designs into production.
NewSenior Power Electronics Engineer Endeavour InfrastructureSenior Power Electronics EngineerAtlanta, GASkills & RequirementsEducation / Experience: MS or PhD degree in power electronics, plus industry experience (5+ years with MS and 3+ years with PhD) in developing high‑power, high‑voltage converters (kW to multi‑MW scale).Mass production & commercial release: A proven, referenceable track record of taking at least one complex, high‑power electronics hardware product from early concept entirely through prototyping, regulatory certifications, and hand‑off to sustained high‑volume mass production. Design & simulation tooling: Proficiency in schematic capture, multi‑physics thermal/magnetic simulation, and circuit simulators (e.g., PLECS, SPICE, LTspice, Simulink).Specific Skills / AbilitiesFamiliarity with modern PLM structures and enterprise PLM/CAD ecosystems (e.g., Dassault Systèmes / 3DEXPERIENCE / DSX environments) to manage bills of materials (BOMs), engineering change orders (ECOs), and multi‑site production handoffs.
Mechanical Engineer - Nuclear Hatch LtdMechanical Engineer - NuclearAtlanta, GAOur teams are developing first‑of‑a‑kind programs in fusion energy development, small and advanced modular reactor design, nuclear sustainability for waste processing and volume reduction, and transformation of the long‑term storage landscape, to name just a few. Our energy expertise in the oil and gas sector comprises the entire value chain - upstream, midstream, and downstream; and in the power sector includes thermal, nuclear, waterpower, renewable, hybrid, transmission and distribution, and grid modernization.
Data Center Lead Mechanical Commissioning Engineer Anchor Mission Critical, LLCData Center Lead Mechanical Commissioning EngineerAtlanta, GA$152,000–$171,000Anchor Mission Critical was founded to address a persistent industry challenge: as data center projects grow in scale and complexity, execution quality too often depends on heroics rather than disciplined systems. The Lead Mechanical Commissioning Engineer is the technical authority responsible for leading the planning, execution, and validation of mechanical commissioning activities on mission-critical data center projects.
Senior Power Electronics Engineer EndeavourSenior Power Electronics EngineerAtlanta, GeorgiaFamiliarity with modern PLM (Product Lifecycle Management) structures and enterprise PLM/CAD ecosystems (e.g., Dassault Systèmes / 3DEXPERIENCE / DSX environments) to manage bills of materials (BOMs), engineering change orders (ECOs), and multi-site production handoffs. Mass Production & Commercial Release: A proven, referenceable track record of taking at least one complex, high-power electronics hardware product from early concept entirely through prototyping, regulatory certifications, and hand-off to sustained high-volume mass production.
NewPrincipal Power Uprate Engineer Enercon Services IncPrincipal Power Uprate EngineerKennesaw, GA$130,000–$180,000 / yearDesign Margin Evaluation: Conduct detailed engineering studies to assess available design margins across nuclear plant systems, including reactor core, steam generators, feedwater systems, and electrical infrastructure. In this leadership-level position, you'll leverage your expertise to guide complex engineering projects, mentor junior staff, and contribute to the safe and efficient implementation of power uprates at nuclear facilities.
NewMid-Level Power Uprate Engineer Enercon Services IncMid-Level Power Uprate EngineerKennesaw, GA$90,000–$110,000 / yearDesign Margin Evaluation: Conduct detailed engineering studies to assess available design margins across nuclear plant systems, including reactor core, steam generators, feedwater systems, and electrical infrastructure. Leadership Pathways: This role is designed to groom engineers for leadership-whether you choose to specialize technically, lead teams, or guide future uprate studies and modifications.
Mechanical Engineer 3 - Nuclear Sargent & LundyMechanical Engineer 3 - NuclearAugusta, Georgia$74,353–$113,595 / yearFull timeAI & Automation at Sargent & Lundy: In this role, we expect people to be willing or able to solve problems using modern tools: You are expected to take engineering problems from issue to solution using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. Essential skills and experience: This position requires a BS in Mechanical Engineering or Chemical Engineering from an ABET Engineering Accreditation Commission-approved program with a strong academic background and interest in thermodynamics, heat transfer, fluid mechanics, power engineering, turbomachinery, thermal systems, and energy conversion.
Mechanical Engineer 3 Nuclear Sargent & Lundy LLCMechanical Engineer 3 NuclearAugusta, GA$74,353–$113,595 / yearIn this role, we expect people to be willing or able to solve problems using modern tools: You are expected to take engineering problems from issue to solution using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. Essential skills and experience: This position requires a BS in Mechanical Engineering or Chemical Engineering from an ABET Engineering Accreditation Commission-approved program with a strong academic background and interest in thermodynamics, heat transfer, fluid mechanics, power engineering, turbomachinery, thermal systems, and energy conversion.
Mechanical Design Engineer ERMCO Components IncMechanical Design EngineerAthens, GAElectric Research and Manufacturing Cooperative, Inc. (ERMCO) is the leading manufacturer of distribution transformers and engineered electrical solutions, serving electric utilities, Original Equipment Manufacturers (OEMs), and industrial customers across North America. Collaborate with cross-functional teams, including manufacturing, quality assurance, supply chain, sales, and customer service to ensure successful integration of designs into production.
Power Electronics Engineer Global Talent Resources, IncPower Electronics EngineerHampton, GARemoteWith 15+ years of experience, we connect engineering and leadership professionals to top roles with leading utilities, cooperatives, EPCs, and consulting firms nationwide. Lead the design, development, and optimization of advanced power conversion systems for high-voltage, grid infrastructure, and renewable energy applications.
NewSenior Supplier Quality Engineer Anduril Industries IncSenior Supplier Quality EngineerAtlanta, GA$126,000–$167,000 / yearWorking knowledge of product development methodologies such as Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP) elements such as Failure Modes and Effects Analysis (FMEA), Quality Control Plan (QCP), Statistical Process Controls (SPC), and Measurement Systems Analysis (MSA). Partner with development engineering, product quality engineering, global strategic sourcing and program management to deliver predictable supply to the development programs, production programs, and manage exceptions/containments/deviations for supplier technical performance.
Associate Mechanical Engineer - Nuclear Power Black & Veatch Holding CoAssociate Mechanical Engineer - Nuclear PowerAtlanta, GAThe Associate Engineer-Mechanical is a global team that delivers high quality, on time design and services projects in the areas of Power, Gas, Fuels & Chemicals, Water and Waste Water, Data Centers, and Mining including everything Mechanically related to Process and Power (from Conventional, Combined Heat and Power, Hydro, Hydrogen, Nuclear, Solar/Renewable, LNG, Ammonia, Fertilizer) projects to specialized Air Quality Control, HVAC, Fire Protection, Piping, Thermal and Renewable performance estimating and testing. Black & Veatch's Power Providers focuses on the holistic demands for energy generation markets that include utilities, independent power producers and new non-traditional entrants adding to the much-needed supply of secure, clean power to our industries and communities.
Principal Power Uprate Engineer Enercon Services, Inc.Principal Power Uprate EngineerKennesaw, Georgia$130,000–$180,000 / yearFull timeDesign Margin Evaluation: Conduct detailed engineering studies to assess available design margins across nuclear plant systems, including reactor core, steam generators, feedwater systems, and electrical infrastructure. In this leadership-level position, you’ll leverage your expertise to guide complex engineering projects, mentor junior staff, and contribute to the safe and efficient implementation of power uprates at nuclear facilities.
Mid-Level Power Uprate Engineer Enercon Services, Inc.Mid-Level Power Uprate EngineerKennesaw, Georgia$90,000–$110,000 / yearFull timeDesign Margin Evaluation: Conduct detailed engineering studies to assess available design margins across nuclear plant systems, including reactor core, steam generators, feedwater systems, and electrical infrastructure. Leadership Pathways: This role is designed to groom engineers for leadership—whether you choose to specialize technically, lead teams, or guide future uprate studies and modifications.
Senior Mechanical Design Engineer Satwave Arrays, IncSenior Mechanical Design EngineerAtlanta, GADesign for manufacturing and assembly (DFM/DFA) across CNC machining, sheet metal, extrusions, castings, additive processes, molded elastomeric gaskets, custom seals, and other forms of manufacturing. Satwave Arrays, Inc. develops advanced flat-panel active electronically steered array (AESA) satellite terminals.
Power Electronics Engineer - PSSD Southern States LLCPower Electronics Engineer - PSSDGAJob Summary: The Power Electronics Engineer will play a pivotal role in the design, development, and optimization of advanced power conversion systems, focusing on multilevel converter technologies for applications in renewable energy, grid infrastructure, and high-voltage systems. Collaborate with control systems, mechanical, and test engineers to integrate power electronics into larger systems, addressing challenges like fault protection, cooling, and scalability.
Mechanical Engineer - Advanced Power Generation Black & Veatch Holding CoMechanical Engineer - Advanced Power GenerationAtlanta, GAThe Mechanical Engineering Department is a global team that delivers high quality, on time design and services projects in the areas of Power, Gas, Fuels & Chemicals, Water and Waste Water, Data Centers, and Mining including everything Mechanically related to Process and Power (from Conventional, Combined Heat and Power, Hydro, Hydrogen, Nuclear, Solar/Renewable, LNG, Ammonia, Fertilizer) projects to specialized Air Quality Control, HVAC, Fire Protection, Piping, Thermal and Renewable performance estimating and testing. Black & Veatch's Power Providers focuses on the holistic demands for energy generation markets that include utilities, independent power producers and new non-traditional entrants adding to the much-needed supply of secure, clean power to our industries and communities.
NewSafety Analysis Engineer Enercon Services IncSafety Analysis EngineerKennesaw, GA$95,000–$185,000 / yearApply knowledge of thermal hydraulics and related computer codes such as GOTHIC, RELAP, RETRAN and MAAP to address problems including room heat-up, reactor or plant system response, high energy line break and environmental qualification. Radiological & Shielding Analysis: Perform shielding and radiological evaluations using diverse methods and models for applications including environmental qualification, spent fuel storage and shielding design.
Process Engineer - Power Generation Wood PLCProcess Engineer - Power GenerationTucker, GeorgiaStrong experience in one or more of the following: gas turbine simple/combined-cycle plants, cogeneration/CHP, conventional thermal/boiler-based plants, biomass/WTE, chemical recovery boilers, air pollution control systems (FGD/SCR) . This is an outstanding opportunity to join a respected 50 year legacy team working on technically challenging, high-impact power generation projects across the full project lifecycle - from feasibility studies and FEED through detailed design and commissioning support.
NewLead Engineer - Nuclear Deterministic Safety Analysis GE VernovaLead Engineer - Nuclear Deterministic Safety AnalysisAtlanta, GeorgiaGE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. The Lead Deterministic Safety Analysis (DSA) Engineer position will make immediate contributions to the team responsible for BWRX-300 deterministic safety analyses, while being technically mentored by a team of high performing engineers.
NewEngineer - Nuclear Deterministic Safety Analysis GE VernovaEngineer - Nuclear Deterministic Safety AnalysisAtlanta, GeorgiaGE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. Lead a variety of projects including technical evaluations and analyses in the area of Anticipated Operational Occurrences, Anticipated Transients without Scram, Reactor Heat Balance, and Thermal Hydraulic Fuel Channel Analyses.
Mechanical Engineer Graphic Packaging Holding CoMechanical EngineerAtlanta, GA$80,300–$107,100 / yearAt Graphic Packaging International, we produce the paper cup that held your coffee this morning, the basket that transported those bottles of craft beer you enjoyed last weekend, and the microwave tray that heated your gourmet meal last night. We're one of the largest manufacturers of paperboard and paper-based packaging for some of the world's most recognized brands of food, beverage, foodservice, household, personal care and pet products.
Project Design Engineer (Mechanical) Selectek, Inc.Project Design Engineer (Mechanical)Hampton, GAThe Project Design Engineer will work closely with the Chief Engineer and Project Management Engineer as well as collaborate with the other Project Design Engineers in the engineering team to execute mobile projects. Responsibilities : Executes mobile projects as either assistant or lead Project Design Engineer with oversight and assistance from Chief Engineer and other, more experienced Product Design Engineers.
Vehicle Development Engineer Blue Bird CareersVehicle Development EngineerMacon, GeorgiaCross-Functional Optimization: Collaborate directly with Component Design Engineers, Simulation teams (FEA/CFD), and Plant Manufacturing Operations to refine vehicle designs for optimal assembly and performance. Test Planning & Execution: Author comprehensive vehicle validation plans (DVP&R) and conduct physical vehicle testing on test tracks and laboratory environments (e.g., structural durability, thermal performance, and vehicle dynamics).
Motors Application Engineer WorldWide Electric CorpMotors Application EngineerAtlanta, GAFull timeThis position plays a key role in defining motor specifications for new product development and serves as a technical liaison between customers, sales, and internal engineering and manufacturing teams. The ideal candidate brings hands-on experience in motor application engineering or technical sales from a leading motor manufacturer or distributor and is comfortable operating in a fast-paced, customer-driven environment.
Materials Engineer Blue Bird CareersMaterials EngineerMacon, GeorgiaMaterial Selection & Innovation: Evaluate and select metals, alloys, plastics, composites, polymers, and coatings for body structures, chassis components, and thermal management systems. Failure Analysis: Lead comprehensive root cause analysis (RCA) on component failures from the field or production line, delivering technical reports and corrective actions.
NewApplication Engineer - EC Motors WEG SAApplication Engineer - EC MotorsDuluth, GAFounded in 1961, WEG operates mainly in the sector of capital goods, having five main businesses: Motors, Energy, Automation, Coatings Transmission & Distribution, providing global solutions for electric motors, variable frequency drives, soft starters, controls, panels, transformers, and generators. This role bridges engineering expertise and market development, working directly with OEM customers, system integrators, distributors, and end users to specify, design-in, and support EC motor solutions across HVAC, commercial refrigeration, data center cooling, agricultural ventilation, and industrial fan applications.
Project Engineer - Asset Enhancement Services (Multiple Openings) GE VernovaProject Engineer - Asset Enhancement Services (Multiple Openings)Atlanta, GeorgiaThis position will have responsibility for executing the asset enhancement projects for the existing operating fleet to demonstrate compliance with licensing requirements and deliver engineering analyses supporting AES Projects such as Extended Power Uprates (EPUs), Maximum Extended Load Limit Limit Analyses Plus (MELLLA+), Thermal Power Optimizations, and other AES Engineering Analyses. The Asset Enhancements Services (AES) Projects Engineer will make immediate contributions working with an energetic, diverse team of engineers performing Boiling Water Reactor (BWR) fuel, safety, services, and thermal hydraulic analyses supporting a variety of applications.