Emissions and OBD Calibration Engineer Hyundai America Technical Center, Inc.Emissions and OBD Calibration EngineerChino, CA$115,000–$155,000 / yearThe Chino Emissions and OBD Validation (CEMOV) team is part of the Electrified Propulsion division at HATCI and plays a critical role in ensuring our propulsion systems meet increasingly stringent regulatory emissions and on-board diagnostics requirements while delivering exceptional performance and efficiency. With our primary R&D campus in Michigan and specialized engineering, development, and proving ground facilities across North America, HATCI provides a dynamic, collaborative environment where groundbreaking ideas accelerate into market-leading vehicle advancements.
Industrial Engineer – General Assembly Vets HiredIndustrial Engineer – General AssemblyRiverside, CaliforniaThis role blends hands-on operational involvement with strong analytical skills to optimize takt time, manpower planning, and overall production performance. Develop and maintain takt-time targets and station-level manpower plans to balance production lines.
Tech Support Engineer AVEVA Group PlcTech Support EngineerLake Forest, CA$82,400–$137,300 / yearThis pay range represents the minimum and maximum compensation that the position offers, and final compensation can vary within the range depending on work location, job experience, skills, and relevant educational attainment and/or training. Our cutting-edge solutions are used by thousands of enterprises to deliver the essentials of life - such as energy, infrastructure, chemicals, and minerals - safely, efficiently, and more sustainably.
Data Scientist for Analytics (Engineer/Scientist Support) CACI International IncData Scientist for Analytics (Engineer/Scientist Support)Norco, CA$69,600–$142,700 / yearThis is an exciting opportunity to contribute to technical analysis in support of government-led assessments of Integrated Combat Systems and Weapons Systems across warfare areas including Integrated Air and Missile Defense (IAMD), Surface Warfare (SUW), Ballistic Missile Defense (BMD), Ground Based Air Defense (GBAD), Strike, Area Defense, Self-Defense and Point Defense areas. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Engineer, Software Architecture Vets HiredEngineer, Software ArchitectureRiverside, CaliforniaThe Engineer is responsible for the design, development, testing, and troubleshooting of vehicle systems and applications, with a primary focus on software architecture for Electric Vehicles (EVs) and connected vehicle platforms. The engineer also mentors junior developers, contributes to architecture governance, and supports the delivery of high-quality software solutions through best practices in documentation, quality, security, and continuous improvement.
Propulsion Test Engineer II Hyundai America Technical Center, Inc.Propulsion Test Engineer IIChino, CA$80,000–$93,000 / yearThe Position: The Propulsion Test Engineer II would work with subject propulsion systems (i.e., internal combustion, hybrid-electric, and battery-electric) of diverse vehicle segments, utilizing in-vehicle testing, customer research, and subjective performance evaluation to support lead engineers in defining and achieving targets. • Identify drivability and fuel economy strengths and weaknesses, in addition to conducting root cause analysis via measured data to determine the powertrain control strategies that contribute to the identified behaviors.
Application Engineer I EMCOR Group IncApplication Engineer IChino, CA$35–$40 / hourThe ability to identify mechanical equipment on drawings the following: Chillers, Boilers, Pumps, AHU's, FCU's, VAV's, and EF's.• Understand basic electrical control circuits including 24VAC power and controller input/outputs. As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success.
Validation Engineer Vets HiredValidation EngineerRiverside, CaliforniaThis role supports functional, durability, safety, and regulatory compliance testing while working closely with cross-functional teams to ensure vehicle performance, reliability, and certification readiness. The Validation Engineer is responsible for planning, executing, and documenting test and validation activities for Electric Vehicle (EV) systems and components.
Sr. Adobe Experience Platform (AEP) Engineer Job | Esri Career Opportunity Environmental Systems Research Institute IncSr. Adobe Experience Platform (AEP) Engineer Job | Esri Career OpportunityRedlands, CA$96,408–$166,920 / yearThe ideal candidate brings strong hands-on experience with Adobe Experience Platform configuration and management, Customer Journey Analytics(B2B), Adobe Web SDK and Adobe Experience Platform Data Collection, and will play a key role in ensuring reliable data flow, accurate reporting, and scalable solutions. This role will also collaborate closely across the broader Adobe Experience Cloud ecosystem, including Adobe Experience Manager, Adobe Journey Optimizer, and Adobe Marketo Engage to enable end-to-end customer data activation and insights.
Embedded Firmware Engineer - The Toro Company The Toro CompanyEmbedded Firmware Engineer - The Toro CompanyRiverside, CA$82,900–$120,000 / yearIn order to grow and build a successful career with The Toro Company, you will be responsible for: Maintain design concepts for circuits and systems, involving analog and digital design techniques and interface sensors with microcontrollers/microprocessors. To be considered for this role, an individual should meet the following minimal requirements: Bachelors degree in electrical or computer engineering or closely related engineering field.
NPD Senior Engineer - Mechanical Design ITWNPD Senior Engineer - Mechanical DesignLake Forest, CaliforniaThe NPD Senior Mechanical Design Engineer plays a key role in driving mechanical design execution across one or more new product development programs, with responsibility for the design and development of cordless and pneumatic power fastening tools primarily used in wood and concrete applications. Owns concept development and detailed design activities , translating customer and market inputs into viable mechanical concepts, developing and refining designs in 3D CAD, and iterating based on internal and external feedback to achieve performance, cost, and schedule goals.
Chief Engineer (Non Union) ABM IndustriesChief Engineer (Non Union)Moreno Valley, CAEnsure compliance of Customer SLA parameters and Change Control activities, review and approve all system changes (set-points, thresholds, alarm-points, etc.) which could impact customer operations . • Resolve all electrical, mechanical and Fire Protection System issues in the facilities while minimizing risk and business impact and communicate issues to management and customers in a timely manner .
Electrical Engineer Vets HiredElectrical EngineerRiverside, CaliforniaThis position centers on vehicle electrical and electronic systems, including power distribution, wiring harness design, control system integration, and support for electric propulsion and charging technologies. The Electrical Engineer will play a key role in developing an innovative medium-duty vehicle platform focused on clean, efficient, and intelligent transportation.
Software Development Engineer II - Back-End (Mission-Focused | ArcGIS) Job | Esri Career Opportunity Environmental Systems Research Institute IncSoftware Development Engineer II - Back-End (Mission-Focused | ArcGIS) Job | Esri Career OpportunityRedlands, CA$97,240–$162,240 / yearAs a Software Development Engineer II, you will design and develop scalable backend services and APIs that enable complex data processing, system integration, and real time analytics. Compensation decisions and the base range for this role take into account many factors including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs.
Sr. Software Development Engineer - Topographic Mapping Job | Esri Career Opportunity Environmental Systems Research Institute IncSr. Software Development Engineer - Topographic Mapping Job | Esri Career OpportunityRedlands, CA$123,136–$202,488 / yearIf you are passionate about geospatial technologies, AI-driven data quality management, and building scalable, high-performance distributed solutions, this role offers the opportunity to work on cutting-edge technologies that shape how organizations build, validate, and maintain accurate geospatial assets. As part of the Professional Services division, you will work closely with product teams, domain experts, and technical specialists to create robust, production-ready software that transforms and advances geospatial data quality.
Intermediate Structural Engineer BESTECHIntermediate Structural EngineerOntario, CA$110,000–$135,000 / yearYour Role as Intermediate Structural Engineer As an Intermediate Structural Engineer, you will be responsible for conducting the analysis and design of a wide variety of structural systems, ranging from underground mining infrastructure to industrial buildings. The final offer will be determined by a combination of factors, including the candidate's skills, experience, and qualifications; their placement within our internal compensation structure; and relevant geographic cost‑of‑living considerations, where applicable.
Electrical Project Engineer Opal FuelsElectrical Project EngineerRancho Cucamonga, CAField responsibilities include performing walk downs at active construction, industrial, or operational sites; walking on uneven or unimproved surfaces such as gravel, dirt, concrete, steel grating, and scaffolding; climbing stairs, ladders (including vertical ladders), and scaffolding; working at heights and in confined or congested spaces; and safely wearing required personal protective equipment (PPE), which may include hard hats, safety glasses, steel toe boots, gloves, hearing protection, fall protection equipment, and respirators as dictated by site conditions. The position requires the ability to work in outdoor and industrial environments with potential exposure to varying weather conditions, noise, dust, lighting, and nearby moving equipment, while maintaining situational awareness and adherence to safety protocols.
Tech Support Engineer AVEVATech Support EngineerLake Forest, California82,400.00 - $137,300.00 This pay range represents the minimum and maximum compensation that the position offers, and final compensation can vary within the range depending on work location, job experience, skills, and relevant educational attainment and/or training. Our cutting-edge solutions are used by thousands of enterprises to deliver the essentials of life – such as energy, infrastructure, chemicals, and minerals – safely, efficiently, and more sustainably.
DevOps Engineer II - AWS Job | Esri Career Opportunity Environmental Systems Research Institute IncDevOps Engineer II - AWS Job | Esri Career OpportunityRedlands, CA$101,192–$167,336 / yearCompensation decisions and the base range for this role take into account many factors including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. ArcGIS Online is a secure mapping and spatial analysis software as a service (SaaS) platform that empowers organizations around the world to unlock geospatial insights.
NewEngineer, Quality/Heat Treat Howmet Aerospace IncEngineer, Quality/Heat TreatFontana, CA$85,000–$105,000 / yearITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. ''Green Card Holder''), Political Asylee, or Refugee. Understanding of Metals and basic heat treat principles, gas fired furnace operations and maintenance, a plus.
Water Resources Engineer Wilson & CompanyWater Resources EngineerSan Bernardino, California$100,000–$135,000 / yearAbout Us: For nearly a century, Wilson & Company, Inc., Engineers & Architects, has provided award-winning engineering, architecture, planning, environmental, surveying, geospatial, and construction management services. With employees across multiple offices in the Midwest, Southwest, Rocky Mountain, and Western regions in the United States, we bring people together to practice their craft, create value, and accomplish great things.
Water Resources Engineer in Training Wilson & CompanyWater Resources Engineer in TrainingSan Bernardino, CaliforniaThe position will focus primarily on water-related projects, which can include drainage/flood control including dams and levees, potable/supply water infrastructure, and sanitary/wastewater infrastructure engineering services. With employees across multiple offices in the Midwest, Southwest, Rocky Mountain, and Western regions in the United States, we bring people together to practice their craft, create value, and accomplish great things.
Automation Support Engineer Hy-TekAutomation Support EngineerPerris, CaliforniaWhile performing the duties of this job, the employee is regularly required to be in settings where certain conditions require the use of personal protective equipment (PPE) such as safety glasses, safety shoes, and hearing protection. The ASE will be responsible for all aspects of remote technical troubleshooting, technical service trips, and providing a high-quality on-site presence to assist in resolution of all mechanical and/or electrical issues.
Senior Software Engineer AVEVA Group PlcSenior Software EngineerLake Forest, CA$124,200–$207,000 / yearOur global team of 2000+ developers work on an incredibly diverse portfolio of over 75 industrial automation and engineering products, which cover everything from data management to 3D design. This pay range represents the minimum and maximum compensation that the position offers, and final compensation can vary within the range depending on work location, job experience, skills, and relevant educational attainment and/or training.
Manufacturing Layout Engineer Vets HiredManufacturing Layout EngineerRiverside, CaliforniaThe engineer collaborates closely with tooling, facilities, safety, quality, and operations teams to implement lean manufacturing principles, support hands-on line launches, and continuously improve factory layouts. This position leads the development and optimization of production lines, sub-assembly cells, work-in-process (WIP) zones, and material presentation systems to meet takt time, quality, and safety goals.
Software Development Engineer II - CI/CD & Platform Automation (Mission-Focused) Job | Esri Career Opportunity Environmental Systems Research Institute IncSoftware Development Engineer II - CI/CD & Platform Automation (Mission-Focused) Job | Esri Career OpportunityRedlands, CA$97,240–$162,240 / yearThis role combines software engineering with DevOps and platform engineering principles, ideal for engineers who are passionate about automation, system reliability, and improving developer productivity in complex environments. Design, implement, and maintain high-speed CI/CD pipelines using GitHub Actions/Azure DevOps for cloud-native workflows and Jenkins for complex, cross-platform on-premises build automation.
Land Development Engineer III County of San BernardinoLand Development Engineer IIISan Bernardino, CA$103,105.60–$145,724.80 / yearPhysical: This position includes the following demands: frequent sitting; occasional walking, standing, bending, and squatting; fine manipulation in both hands; continuously reach or work below the shoulder level; must frequently demonstrate near vision and occasionally demonstrate far vision; occasionally lift or carry ten (10) pounds or less; occasionally work near equipment and machinery on rough, uneven, rocky, or slippery surfaces; occasionally exposed to dust, gas, toxic materials, noise, and extremes in temperature and/or humidity; occasionally use protective equipment or clothing. San Bernardino County, the largest county geographically in the United States, encompasses diverse communities across valleys, mountains, and desert regions, and the Department of Land Use Services - Land Development Division plays a key role in guiding safe, sustainable growth through development review, engineering coordination, and regulatory compliance.
NewDevSecOps Engineer II - SaaS Job | Esri Career Opportunity Environmental Systems Research Institute IncDevSecOps Engineer II - SaaS Job | Esri Career OpportunityRedlands, CA$101,192–$167,336 / yearIf you've worked at a software company and enjoy building secure, scalable platforms, this DevSecOps Engineer role offers the chance to apply that experience to the world's largest geospatial Software as a Service offering. Work across teams developing Esri's SaaS, desktop, and enterprise server products, along with the extensions and apps hosted inside of them covering various domains of geospatial data and operations.
Mid-Level/Senior Design Engineer The Structures CompanyMid-Level/Senior Design EngineerChino, CASupports complex aircraft modification programs and requires extensive experience with aircraft structures, systems integration, and regulatory compliance in a fast-paced engineering environment. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries.
Engineer, Validation Herbalife LtdEngineer, ValidationLake Forest, CAGroup Health Programs include Medical, Dental, Vision, Health Savings Account (HSA), Flexible Spending Accounts (FSA), Basic Life/AD&D; Short-Term and Long-Term Disability, and an Employee Assistance Program (EAP). Herbalife offers a variety of benefits to eligible employees in the U.S. (limited to the 50 States and the District of Columbia), which includes Group Health Programs, other Voluntary Benefit Programs, and Paid Time Off.
Professional - Engineering - Software Engineer III MindlanceProfessional - Engineering - Software Engineer IIILake Forest, CAExperience developing embedded software for medical devices according to FDA/ISO regulations (including IEC 62304) and writing supporting design and test documentation. Ability to work independently while collaborating with subject matter experts (SMEs) to meet project schedule and project milestones.
Mechanical Engineer Luxfer Gas CylindersMechanical EngineerRiverside, CA$90,000–$110,000 / yearThe goal of this position is to improve design quality, manufacturability, and operational efficiency through strong engineering practices, attention to detail, and effective configuration management. Summary: This position shall be responsible for supporting product design, documentation control, manufacturing tooling, and continuous improvement initiatives.
NewEnterprise Security Sales Account Manager HCI SystemsEnterprise Security Sales Account ManagerOntario, CaliforniaFull timeHCI Systems Inc. is a licensed C-7, C-10 and C-16 low voltage systems integration contractor offering a full spectrum of services including sales, engineering, installation, service, and maintenance with over 600 employees in our seven branches. Collaborate with premier partners in vertical markets, such as transportation, global/enterprise accounts, utilities, financial/banking, healthcare, datacenters, federal, state, and local governments, and K-12 & higher education.
Sr. Web Developer - AEC Integration Job | Esri Career Opportunity Environmental Systems Research Institute IncSr. Web Developer - AEC Integration Job | Esri Career OpportunityRedlands, CA$123,136–$202,488 / yearEsri is working in partnership with Autodesk and other firms to help our customers design, build, and operate the sustainable infrastructure of the future more rapidly, at lower cost, and in compliance with complex regulatory landscapes. Design and implement: Integration between the ArcGIS geospatial cloud and cloud-based BIM systems such as Autodesk Docs, Autodesk Platform Services, Autodesk Forma, and other information systems.
Design/Drafting Specialist Southern California EdisonDesign/Drafting SpecialistRedlands, CABecome a Design/Drafting Specialist at Southern California Edison (SCE) and join the Redlands District Design Team, where you'll deliver electrical designs from concept through execution with a high level of independence. + Three or more years of experience in preparing and maintaining detailed design drawings, schematics or specifications using either computer-aided design or computer-aided engineering software.
Project Manager - Water/Wastewater Kennedy/Jenks ConsultantsProject Manager - Water/WastewaterRancho Cucamonga, CA$127,000–$212,000 / yearYou'll support a range of water and wastewater projects, including water transmission pipelines, sanitary sewer collection systems, tanks and reservoirs, pump stations, and water and wastewater treatment facilities. Coordinate multidisciplinary teams: Work with in-house design teams across disciplines such as civil, structural, mechanical, electrical, instrumentation and controls, and architectural, as well as specialized sub-consultants.
Sales Enablement Lead Job | Esri Career Opportunity Environmental Systems Research Institute IncSales Enablement Lead Job | Esri Career OpportunityRedlands, CA$101,088–$175,240 / yearCompensation decisions and the base range for this role take into account many factors including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. This role serves as a trusted partner and influence leader across Sales, Sales Operations, Product Marketing, and other cross‑functional teams.
Design/Drafting, Associate Specialist Southern California EdisonDesign/Drafting, Associate SpecialistOntario, CACreates accurate and detailed design drawings, diagrams, maps, and plans for utility distribution and telecommunication systems using Computer Aided Design (CAD) software for routine/simple designs using correct mapping symbols, callouts, decals, and proper tie downs, using CAD, AUD, etc. This role is exciting because your work directly supports reliable energy, advances cleaner air and carbon reduction, and gives you the chance to blend technical design with real-world project impact that powers entire communities.
Accounting Clerk CRH AmericasAccounting ClerkFontana, CARemote$25–$29 / hourThe Accounting Clerk will report to the Accounting Manager and is responsible for maintaining financial records, processing transactions, and assisting the accounting department with various tasks to ensure accurate financial reporting. Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America.
Survey Technician IV* County of San BernardinoSurvey Technician IV*San Bernardino, CA$67,641.60–$93,017.60 / yearExperience: Option 1: Three (3) years of full-time technical Land Surveying, GIS, Civil Engineering, or closely related work experience performing tasks such as: analyzing, creating, or reviewing survey related maps; utilizing GIS to map or index various types of land records; applying the use of land surveying formulas, theories, and practices to analyze the work products produced by professional Land Surveyors; or the application of civil engineering formulas, theories and practices to construction, alteration, demolition, installation or repair work. Candidates with degrees completed outside the U.S. may be required to submit an evaluation report from a reputable credential evaluation service showing equivalency to degrees or coursework completed at a college or university accredited by any accrediting association recognized by the United States Department of Education in order for application to advance in the selection process.
New["Manager - Outside Strategic Accounts","Manager - Outside Strategic Accounts"] EIS["Manager - Outside Strategic Accounts","Manager - Outside Strategic Accounts"]OntarioEIS is a leading North American distributor for process materials, production supplies, engineered fabricated solutions, and value-added services serving the electrical power, electronic assembly and alternative energy markets. EIS is a leading North American distributor of process materials, production supplies, specialty wire and cable and value-added fabricated parts for the electrical OEM, motor repair and assembly markets.
NewAssistant Director of Strength and Conditioning California Baptist UniversityAssistant Director of Strength and ConditioningRiverside, CA$70,000–$83,000 / yearThe Assistant Director of Strength and Conditioning assist in the oversight and management of the Athletic Performance Center and provides comprehensive coaching to improve athletic performance, decrease potential for injury, and improve general health and wellness for assigned sports teams. While performing the duties of this job, the employee is regularly required to stand for long periods of time, run, jump, squat, bend, and perform other athletic movements that require high levels of coordination, skill, and strength, safely and with proper technique.
Manufacturing Supervisor Clarkwestern Dietrich Building Systems LLCManufacturing SupervisorRiverside, CA$67,033–$101,404 / yearWe manufacture innovative products for interior and exterior framing, interior and exterior finishing, floor and roof framing, clips, connectors, metal lath, welded wire barrier mesh, and accessories. As the demands for higher performance in all aspects of todays buildings rise, we partner with teams of architects, engineers, building developers, and owners, contractors, and more on projects of all sizes, scopes, and complexity.
Commercial Plumbing Project Manager Redlands Plumbing, Heating & ACCommercial Plumbing Project ManagerRedlands, CA$90,000–$110,000 / yearWe're looking for a hands-on leader who enjoys being in the field, supporting crews, solving problems, coordinating with customers and contractors, and ensuring projects are completed safely, on schedule, and within budget. We are looking for an experienced Commercial Plumbing Project Manager who is passionate about leading successful projects, developing field teams, and delivering exceptional results.
AI Software Engineer AVEVAAI Software EngineerLake Forest, California$103,500–$172,500 / year103,500.00 - $172,500.00 T his pay range represents the minimum and maximum compensation that the position offers, and final compensation can vary within the range depending on work location, job experience, skills, and relevant educational attainment and/or training. Hands-on experience with Microsoft Azure and associated PaaS services (e.g., Azure Functions, AKS, API Management) preferred; experience with other cloud platform (AWS, GCP) is also valued.
Lead Engineer Crown Technical SystemsLead EngineerFontana, California$105,000–$144,400 / yearCrown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). Read and understand all customer documentation provided: specifications, General Assembly drawings, plan view drawings, electrical single line and schematic drawings, wiring diagrams, detail fabrication drawings, BOMs, etc.
NewProposal Engineer Crown Technical SystemsProposal EngineerFontana, California$72,300–$99,400 / yearCrown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). T he Estimation Engineer will be responsible for collaborating with our engineering department, project managers, and business development team to prepare cost proposals for our relay panels and control enclosure manufacturing projects.
Maintenance Planner/Scheduler Nellson Nutraceutical LLCMaintenance Planner/SchedulerOntario, CAWorks closely with technicians, engineers, operations, and managers to establish a schedule of proactive maintenance activities during appropriate downtime. Job Summary: Devises plans and programs for routine preventative maintenance and scheduled turnaround events at a plant or production facility.
NewQuality Engineer Karwell TechnologiesQuality EngineerLake Forest, CAThe ideal candidate will have strong knowledge of Medical Device Quality Engineering, ISO 13485, ISO 14971, Design Controls, Risk Management, Verification & Validation (V&V), Change Control, CAPA, GxP Compliance, and Product Development Support. Job Summary: We are seeking a Quality Engineer with experience in the Medical Device industry to support innovative healthcare products while collaborating with R&D, Regulatory, and cross-functional engineering teams.
Mechanical Engineer Luxfer Holdings PLCMechanical EngineerRiverside, CA$90,000–$110,000 / yearThe goal of this position is to improve design quality, manufacturability, and operational efficiency through strong engineering practices, attention to detail, and effective configuration management. Summary: This position shall be responsible for supporting product design, documentation control, manufacturing tooling, and continuous improvement initiatives.