p/>Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. December 5, 2025
For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Analysis of Alternatives (AoA), Systems Engineering Plan (SEP)…), systems review and analysis with written reporting, briefing, and artifact development as required for all of the technical specialty areas defined in this section; and the planning and execution of all necessary technical reviews, assessments, and interchange meetings (e.g. Participate in integrated logistics support efforts, provisioning and source coding, maintenance data collection, technical order management, configuration management, evaluation of quality deficiency reports, and/or identification of alternate sources of supply for diminishing manufacturing/materiel sources preferred.
Your work will apply practical engineering knowledge across a broad range of established system engineering principles, concepts, and methods, with a strong emphasis on electrical engineering while ensuring Operational Safety, Suitability, and Effectiveness (OSS&E) is integrated into all activities. In this role, you will provide Electrical Engineering support for programs and projects, ensuring the successful research, design, development, installation, testing, and operation of systems under the Integrated Product Team (IPT).
This program is modernizing the ground-based leg of the U.S. nuclear deterrent triad, including intercontinental ballistic missile (ICBM) systems and launch infrastructure. Johnson Service Group (JSG) is recruiting for a Senior Fire Protection Engineer to support the Sentinel Program at Hill Air Force Base in Ogden, UT.
p>Additional responsibilities will include but are not limited to:
Northrop Grumman supports the Air Force's sustainment, development, production and deployment of hardware and system modifications for Intercontinental Ballistic Missile (ICBM) Ground and Airborne Launch Control Systems, Launch Facilities and associated infrastructure. Partner with the program's SEIT leadership and Office of Chief Engineering (OCE) to ensure their assigned threads technical baseline is developed with high quality.
Clearfield, UT30+ days ago
Experience supporting production in a large defense or aerospace environment • Electrical engineering experience with CCAs, EO/IR, RF, seeker/sensor, or other electronic subsystems • Experience in: • Circuit design • CCA assembly • Electrical test • Test automation scripting • Sensor control • PCB fabrication • CCA processes and relevant industry specifications • Familiarity with design and analysis tools such as: • Mentor Graphics Designer • PSPICE / SystemVision • MATLAB / Mathcad / IDL • CST, HFSS, ADSS • Signal generators, oscilloscopes, RF analyzers • Experience investigating issues, performing SPC analyses, and improving production yields • Strong technical writing and presentation skills • Ability to work independently and within small, focused technical teams • Experience providing: • Technical oversight • Cost estimation • Task tracking & reporting • Coordination across functions • Detailed engineering reports • Proposal support. • Highly collaborative, engineering-focused environment • Close coordination with Operations, Supply Chain, Quality, and Engineering • Hands-on work in production test labs and integration areas • Fast-paced, technical environment with frequent troubleshooting needs.
This role leads and mentors process engineers, drives manufacturing excellence through data-driven decision-making, and serves as the focal point for process optimization, equipment changes, facility design reviews, and corrective actions. The Staff Engineer for Case Manufacturing provides technical leadership and oversight for case processing operations across multiple manufacturing sites, ensuring successful startup, production readiness, and continuous process improvement.
Louis Washington DC View All Locations Business Management Cyber Cloud Data Science DevSecOps Electrical Engineering Mechanical Engineering Network Engineering Software Engineering Systems Engineering Technical Support View All Career Fields Start Application >> Back to Search Results > Previous Opportunity > Next Opportunity > Mechanical Engineer Job ID: 2610538 Location: Hill AFB, UT, United States Date Posted: Mar 24, 2026 Category: Engineering and Sciences Subcategory: Mechanical Engr Schedule: Full-Time Shift: Day Job Travel: Yes - 10% of the time Minimum Clearance Required: Secret Clearance Level Must Be Able to Obtain: None Potential for Remote Work: On-Site Benefits: Click here Share: mail Apply Now > Apply Now > Job Description Description SAIC is seeking an exceptional Mechanical Engineer to provide high-quality delivery of infrastructure projects to one of the Department of War's most complex and vital acquisition efforts - the Sentinel Intercontinental Ballistic Missile (ICBM) Program. Louis Washington DC View All Locations Career Fields Business Management Cyber Cloud Data Science DevSecOps Electrical Engineering Mechanical Engineering Network Engineering Software Engineering Systems Engineering Technical Support View All Career Fields View All Jobs Candidate Resources Chantilly Charleston Colorado Springs Crane El Segundo Fort Meade Hampton Roads Hawaii Huntsville Reston San Diego Southern Maryland St.
In business for over 80 years, Reeve & Associates is a multi-disciplinary firm offering master planning, structural engineering, civil engineering, land surveying, and landscape design services throughout the Western United States. Assists in the preparation of calculations, such as storm drain, wastewater, water system, earthwork quantities, transportation, cost estimates, and other supporting documentation for public and private projects.
p>DoD SkillBridge Eligibility: · Has served at least 180 days on active duty · Is within 12 months of separation or retirement · Will receive an honorable discharge · Has taken any service TAPS/TGPS · Has attended or participated in an ethics brief within the last 12 months · Received Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of internship.
Responsibilities May Include:
• Review of Electromagnetic Interference and Compatibility (EMI/EMC) test plans and test procedures (EMITP) to meet Data Item Descriptions (DID) requirements • Review Qualification & Pre-Qualification EMI Test Plans/Procedures (EMITP) • Support EMI/EMC test planning, Test Readiness Reviews (TRR) and test integration support.
div>
At Horrocks, we believe the best work comes from companies with values, that our people are our greatest resource, and that we have a responsibility to the communities where we live and work.
Work within a team of project managers, design engineers, technicians, and support staff to successfully complete a variety of projects.
You will support this role 100% onsite Key Responsibilities: * Provide direct, daily technical engineering support and leadership for electrical systems, instrumentation and controls for plant processing equipment, plant operations and maintenance. You will have a unique opportunity to lead and support projects in heavy industrial setting including chemical extraction, ingot melting and metal forming processes You will report to the Senior Manager of Engineering and be located at Ogden, UT.
SALT LAKE CITY, UT16 days ago
Auria supports the Air Force's sustainment, development, production and deployment of hardware and system modifications for the ICBM Ground and Airborne Launch Control Systems, Launch Facilities, and associated infrastructure. * Interface with subject matter experts, analysts, architects, designers, system engineers and specialty engineers to capture Sentinel Node structure and behavior across SysML/UML frameworks.
Clearfield, UT30+ days ago
As an Ethernet Network Engineer supporting avionics modifications, you will perform tasks across the full lifecycle-design, development, testing, fielding, and sustainment-of weapon systems. Technical Proficiency: Proven experience with high-speed Ethernet networking, including design, implementation, and troubleshooting in high-performance environments.
li>Collaborate with layout personnel and pipe support engineers to ensure quality and cost-effective designs. Coordinate plant design engineering activities with specialty groups, clients, vendors, contractors, and other stakeholders.
North Salt Lake, UT30+ days ago
li>Maintain safe and environmentally sound operation of units through periodic safety meetings, encourage reporting of all incidents, investigation, and corrective actions proposal for all incidents, as well as ensuring that no major environmental incidents occur via proper inspections. Develop and/or assist others in developing workable process solutions to meet the requirements of the business (e.g., increased capacity, new product development, reduced costs, improved quality, improved process safety, improved environmental impact).
Salt Lake City, UT30+ days ago
p>Minimum Qualifications: • Bachelors or Masters of Engineering degree in Civil Engineering or other professionally recognized equivalent disciplines from an accredited ABET university • Minimum of 10 years' experience, with at least two years of airport design experience • Professional Engineer license • Working knowledge of AutoCAD, Civil3D, Microsoft Office (Word, Excel, and PowerPoint) required for use in completing assignments.
Activities include the geometric design of runways, taxiways, and aprons; bituminous and concrete pavement design; stormwater and utility infrastructure design; coordination with airports, airlines, FAA and other tenants; and construction administration/management.
ul>Serves as the Owner's on-site engineering representative during construction, with a primary responsibility for field-based coordination, technical interpretation, and resolution of construction-phase issues, including review of RFIs, submittals, and field conditions for alignment with design intent, constructability, and operational impacts.
Job Description:
As a registered Professional Engineer (PE), Certified Construction Manager (CCM), or Project Management Professional (PMP), serves as the Owner's field-based Civil Construction Engineer for complex airport capital improvement projects, with a primary focus on construction-phase execution.
Brigham City, UT30+ days ago
Our brands include American Buildings, CBC Steel Buildings, Kirby Building Systems, and Nucor Building Systems. On-Site Fabrication Shop: For many of our divisions, the fabrication shop is conveniently located on-site, allowing you to see your designs come to life and ensuring quality control throughout the.
Riverdale, Utah30+ days ago
div>At Horrocks, we believe the best work comes from companies with values, that our people are our greatest resource, and that we have a responsibility to the communities where we live and work. Unmatched Comp Time Policy: Hours worked over 40 in a week can be reimbursed as additional pay at an equivalent hourly rate or banked as additional PTO.
.
p>Job Title: Quality Engineer Location: Ogden, UT 84404 Pay: $60,000 - $90,000/yr (DoE - plus annual bonus opportunity) Zip Code: 84404 Start Date: ASAP Job Type: Direct, Full-Time Quality Engineer: Our client, a leading aerospace manufacturer, is seeking a Quality Engineer to join its team in Ogden, Utah. - Experience with: AS9100 Quality Management Systems, NADCAP accreditation requirements, Statistical, Process Control (SPC), Root Cause Analysis, Corrective and Preventive Actions (CAPA) - Experience working directly with customers and suppliers to resolve technical and quality issues.
p>Job Title: Manufacturing Engineer II Location: Ogden, UT 84404 Pay: $80,000 - $120,000/yr (DoE - plus annual bonus opportunity) Zip Code: 84404 Start Date: ASAP Job Type: Direct, Full-Time Manufacturing Engineer II Our client, a leading aerospace manufacturer, is seeking a Manufacturing Engineer II to join its engineering team in Ogden, Utah. - Experience with one or more of the following manufacturing processes: Machining, Sheet Metal Forming, Welding, Brazing, Heat Treat, Vacuum Furnace Operations, NDT, Laser Processing, EDM - Experience with titanium, nickel alloys, superalloys, or other aerospace materials is a plus.
p>The Role: We are seeking a driven and technically capable Quality Engineer or Senior Quality Engineer to support a custom engineered-to-order manufacturing environment serving the oil & gas, chemical, and industrial markets.
Experience with Inspection & Test Plans (ITPs), NCR management, Corrective actions, Welding documentation, MTRs and material traceability, Quality procedures and work instructions, Customer audits and inspections.
p>As an Electrical Engineer, Journeyman your duties will include the following, but are not limited to: Apply practical engineering knowledge across a broad range of established system engineering principles, concepts, and methods, with a strong emphasis on electrical engineering while ensuring Operational Safety, Suitability, and Effectiveness (OSS&E) is integrated into all activities.
Technical Expertise: Experience and/or training in the following electrical engineering disciplines:
Electrical circuit analysis, RF chain sub-specialties (antenna design, high-power transmitters/amplifiers, receiver processing, etc.), and electro-mechanical controls.
li>Conduct systems architectural analyses to include system design/design feasibility and state-of-the-art assessment to Produce architectures, document planned and existing systems, determine deficiencies, develop alternatives, recommend solutions, and support development of a plan to implement the chosen solution per acquisition and sustainment system engineering processes. Analysis of Alternatives (AoA), Systems Engineering Plan (SEP)…), systems review and analysis with written reporting, briefing, and artifact development as required for all of the technical specialty areas defined in this section; and the planning and execution of all necessary technical reviews, assessments, and interchange meetings (e.g.
p style="text-align:inherit"/>If you need a reasonable accommodation to apply for a job at JR Automation, please send the nature of request and contact information to jrcareers@jrautomation.com. Success in this role requires strong technical expertise, problem-solving skills, and the ability to mentor junior engineers while delivering high-quality solutions.
Have evidence of successfully passing the written test required for professional registration or have successfully passed the Engineer-in-Training (EIT) examination and have completed all the requirements for either (a) a Bachelors Degree in Engineering Technology (BET) from an accredited college or university that included 60 semester or 90 quarter hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by ABET. SPECIALIZED EXPERIENCE: Applicants must have at least 1 year (52 weeks) of specialized experience at the next lower broadband NH-02, equivalent to the next lower grade GS-11 or equivalent in other pay systems Specialized experience is described as skill and knowledge of aircraft ground systems, and support equipment sufficient to plan, test, design, troubleshoot, evaluate, and oversee the development and or sustainment of highly complex weapons systems and or aircraft systems.
p>Extraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the worlds infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. You will develop calculations, construction drawings, Fire Protection Design Analysis Reports (FPDAR), tailored Unified Facilities Guide Specifications (UFGS), requisition specifications, review and approve sub-contractors submittals, and assist in determining needed changes and with final testing.
p>Extraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world''s infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. The ideal candidate will have solid experience in executing requirements management, model-based systems engineering, industrial process modeling, and design development experience producing design documents for government customers in accordance with Unified Facilities Criteria and the Whole Building Design Guide.
p>Extraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world''s infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. You will develop calculations, construction drawings, Fire Protection Design Analysis Reports (FPDAR), tailored Unified Facilities Guide Specifications (UFGS), requisition specifications, review and approve sub-contractors' submittals, and assist in determining needed changes and with final testing.
Brigham City, Utah20 days ago
With multiple locations throughout the United States, NBG is proud to design world-class building solutions tailored to meet the needs of any market including commercial, industrial, agricultural, and institutional. Nucor Buildings Group (NBG), a proud Nucor product group, is one of North America's largest and most experienced manufacturers of metal building systems.
What You'll Get To Do: Responsible to perform full spectrum of design application parts management tasks on assigned system and sub-systems to ensure streamlined risk identification, risk mitigation, and tracking of at-risk component issues during the design and manufacturing of weapon systems and equipment under an overarching Systems Engineering framework. Collaborates with systems engineers, design engineers, project managers, reliability engineers, and external customers to establish clear part, material and manufacturing process design documentation traceability to system performance.
p>What You'll Get To Do: Responsible to perform full spectrum of design application parts management tasks on assigned system and sub-systems to ensure streamlined risk identification, risk mitigation, and tracking of at-risk component issues during the design and manufacturing of weapon systems and equipment under an overarching Systems Engineering framework.
Collaborates with systems engineers, design engineers, project managers, reliability engineers, and external customers to establish clear part, material and manufacturing process design documentation traceability to system performance.
p>The level Engineer II may be assigned to participate in a design project, execute the building of prototypes, and pioneer research and development activities contributing to Fresenius products. The Engineer II may be responsible to initiate the design concept, formulate the pre-development project and participate actively in the feasibility study as assigned.
Clearfield, UT28 days ago
What you will get to do: The Sustaining Engineering Staff Systems Engineer is responsible for leading the ICBM Operational Software Sustainment Program (IOSSP) engineering team in the design, development, and delivery of solutions that meet government requirements. Experience sustaining long term service life systems through application of logistics practices including component performance monitoring, spares/resource monitoring, analytic forecasting, DMSMS, and alternate source/component replacement solutions.
div class="col col-xs-7 description" id="job-description">Our client is seeking senior-level Structural Engineers to support the Engineering and Manufacturing Development (EMD) phase of the US Air Force’s Sentinel program (GBSD) in Ogden, UT. Sentinel is a vital nuclear modernization program that will recapitalize the nation's aging ground based leg of the nuclear triad -- the Minuteman III Intercontinental Ballistic Missile (ICBM).
Clearfield, UT30+ days ago
li>Experience sustaining long term service life systems through application of logistics practices including component performance monitoring, spares/resource monitoring, analytic forecasting, DMSMS, and alternate source/component replacement solutions. What you will get to do:
The Sr Staff Engineer Systems - Sustaining Engineering is responsible for leading the Remote Visual Assessment (RVA) engineering team in the design, development, and delivery of solutions that meet government requirements.
li>Perform cloud failover and disaster recovery operations for client-hosted applications, including pre-failover validation, execution, post-failover verification, and annual ISCP testing for enterprise file shares within government cloud environments. 2 years of hands-on experience with enterprise SAN management, covering Fiber Channel zoning, iSCSI, FCoE, HBA/CNA, storage controllers, LUN management, RAID, and NAS.
Salt Lake City, UT30+ days ago
HF Sinclair owns and operates refineries located in Kansas, Oklahoma, New Mexico, Wyoming, Washington and Utah and markets its refined products principally in the Southwest U.S., the Rocky Mountains extending into the Pacific Northwest and in other neighboring Plains states. HF Sinclair Corporation, headquartered in Dallas, Texas, is an independent energy company that produces and markets high-value light products such as gasoline, diesel fuel, jet fuel, renewable diesel and other specialty products.
Salt Lake City, UT30+ days ago
p>The Avionics and Electrical systems Engineer is responsible for developing repairs and alterations, defining maintenance specifications, evaluating new avionics technologies, and the technical airworthiness management of aircraft avionics, electrical systems, and related components on the Airbus and Embraer aircraft. Prepare engineering documents such as Engineering Orders (EO) to provide technical dispositions for repairs, modifications, inspections, or other maintenance actions on aircraft avionics/electrical systems and components, which provide benefits in accordance with Breeze objectives.
They specialize in Mechatronics, with a focus on Motion Control technology and the following products: Servo Drives and Motors, PLCs, HMIs, Motion Controllers, I/O Devices, Ball Screw and Toothed Belt Electromechanical Actuators and Cartesian Robots. Onsite customer support for prototype startups in order to do "proof of concept", good working knowledge of third-party PLC software, network configuration and device integration coverage including product sizing and selection.
What You Will Get to Do: • Collaborate with stakeholders to decompose technical requirements, develop complete and verifiable requirements, and conduct trade studies • Generate and update specifications as part of a Systems Engineering framework for the purpose of releasing to suppliers and supporting the procurement process • Develop design and analysis artifacts to support design reviews, customer deliverables, and hardware procurement workflows • Perform heating and cooling calculations to size HVAC equipment • Select appropriate HVAC equipment to meet size and system requirements • Review and provide comments to supplier-submitted drawings and contractual deliveries. Preferred Qualifications: Master's degree in Mechanical Engineering Experience with Environmental Control Systems (ECS) and Heating, Ventilation, and Air conditioning (HVAC) system design and verification Experience with producing construction drawing packages Experience with Revit Experience with Carrier HAP, NX, and Product Lifecycle Management (PLM) software Familiarity with Systems Engineering and Model Based Systems Engineering (MBSE) processes Professional Engineer (PE) license Experience with estimation, bidding, proposals, or RFPs Experience managing a subcontractor.
The primary objective of this role is to collaborate across Systems Engineering, System Test, Global Supply Chain, suppliers, and other Integrated Product Teams (IPTs) to develop and review Environmental Control System hardware requirements, specifications, designs, trade studies, and analyses for the purpose of supporting incremental system maturity milestones and hardware deliveries. Northrop Grumman's Defense Systems sector is seeking a Environmental Control Systems (ECS) Mechanical Engineer to join a multi-functional team of Electrical, Mechanical, and Systems Engineers in Roy, UT.