June 15, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
June 11, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
A Bachelor’s degree in Systems Engineering, Software Engineering, Computer Science, Computer Engineering, Electrical Engineering, Mechanical Engineering, Aerospace Engineering, or equivalent degree from an ABET-accredited university with 8+ years of experience or an MS with 6+ years.
Redstone Arsenal, AL30+ days ago
Hardware Engineer IV9 years relevant experience with Bachelors in related field; 7 years relevant experience with Masters in related field; 4 years relevant experience with PhD in related field; or High School Diploma or equivalent and 13 years relevant experience. Hardware Engineer III5 years relevant experience with Bachelors in related field; 3 years relevant experience with Masters in related field; 0 years experience with PhD in related field; or High School Diploma or equivalent and 9 years relevant experience.
Huntsville, AL30+ days ago
p>Torch Technologies is seeking a highly motivated, innovative, and detail-oriented Software Design Engineer 1 to join our team in support of the Missile Defense Agency (MDA) Engineering Directorate Modeling & Simulation (M&S) Office (DES). In this role, you will be responsible for designing, developing, and maintaining tools and scripts to automate data management processes, improve workflow efficiency, and support internal operations.
The ideal candidate will contribute to the design, development, and maintenance of software systems in a predominantly Windows environment, while working on an Agile development team. As a Mid-Level Software Design Engineer your duties will include the following, but are not limited to:
- Design, develop, test, and maintain software applications primarily in C#.
Since 1997, our mid-sized, nationwide team has been driven by a shared belief: agile, passionate, forward-thinking professionals can meaningfully advance the future of science and technology for the benefit of life on Earth and beyond. Experience routing fluid lines for propellant, pressurant, pneumatic, or hydraulic systems on launch vehicles, spacecraft, or complex aerospace ground support equipment.
You will work cross-functionally with thermal and structures engineering teams and interface directly with program stakeholders to deliver high-quality, review-ready drawings and documentation that meet program requirements. In this role, you will be responsible for the design, modeling, and documentation of passive thermal insulation systems, including Multi-Layer Insulation (MLI), cryogenic MLI (cryo-MLI), and Spray-On Foam Insulation (SOFI).
Huntsville, AL10 days ago
p>GSE Dynamics, Inc., a full-service engineering and manufacturing company located in Hauppauge, NY is seeking an experienced Aerospace/Mechanical Design Engineer to join our engineering team. This is an estimated salary range with any actual compensation offers to be dependent upon factors including experience, skill set, qualifications, and other factors allowed by law.
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. The primary focus of this position is design leadership, with an emphasis on supporting new business development efforts and mentorship of junior engineers, with minimal direct oversight required.
Huntsville, Alabama5 days ago
These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.. Ability to utilize Electrical Analysis packages such as ETAP (or SKM) to perform load flow, short circuit, harmonic analysis, motor starting, AC and DC Arc Flash studies and protection/ coordination studies for low voltage systems of moderate complexity.
Huntsville, AL18 days ago
The salary range for this position represents a general guideline; however, Secmation considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills, work location, current market conditions, and other bona fide data. This role is ideal for an experienced, hands-on engineer with strong expertise in RF and communications design, including software-defined radios (SDR), signal processing, and system-level integration.
Huntsville, Alabama5 days ago
li>The following are pluses:- Ability to utilize Electrical Analysis packages such as ETAP or SKM to perform load flow, short circuit, harmonic analysis, motor starting, AC and DC Arc Flash studies and protection/ coordination studies for low voltage systems of moderate complexity. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research..
Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Create solutions using techniques spanning a variety of engineering disciplines including power distribution, RF design, logic/controls, and custom analog and digital circuit design.
Huntsville, AL30+ days ago
To help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. Job Description:
This is a senior-level mechanical design engineering position with a focus on component and system design of filament wound composite cases for Solid Propulsion and Controllable Solids Systems.
Huntsville, AL30+ days ago
Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Create solutions using techniques spanning a variety of engineering disciplines including power distribution, RF design, logic/controls, and custom analog and digital circuit design.
p>General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world. In addition to the benefits discussed above, the company offers the following voluntary benefits: Critical Illness Insurance, Accident Insurance, Identify Theft Protection, Enhanced Legal Services, Auto and Home Insurance, Pet Insurance, Commuter Benefits, Hospital Indemnity Insurance, Educational Assistance.
Since 1997, our mid-sized, nationwide team has been driven by a shared belief: agile, passionate, forward-thinking professionals can meaningfully advance the future of science and technology for the benefit of life on Earth and beyond. - Experience routing fluid lines for propellant, pressurant, pneumatic, or hydraulic systems on launch vehicles, spacecraft, or complex aerospace ground support equipment.
li>Architect and deliver production-grade agentic AI and multi-agent applications using popular frameworks such as LangChain, LangGraph, AutoGen, CrewAI, or Semantic Kernel; design patterns including orchestrator-agent hierarchies, RAG pipelines, tool-calling agents, and context/memory management. Our purpose comes through in our work with clients that enables impact and value in their organizations, as well as through our own investments, commitments, and actions across areas that help drive positive outcomes for our communities.
Huntsville, AL30+ days ago
To help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. Job Description: L3Harris Aerojet Rocketdyne is seeking an intermediate-level mechanical design engineeringposition with a focus on component and system design of flexseal nozzles for Solid Propulsion Systems.
p>SAIC is seeking a highly motivated and experienced Senior Software Engineer to support the development, integration, and implementation of a Common Translator software solution to bridge communication between legacy aircraft systems and a new Identification Friend or Foe (IFF) transponder at our customer site in Huntsville, AL. The Senior Software Engineer will be responsible for but not limited to the following:
- Design and implement modular and scalable software solutions for the Common Translator system to ensure compatibility between existing avionics systems and the new IFF transponder.
Huntsville, AL30+ days ago
Manual and semi-automated tooling such as jigs, fixtures, molds, mandrels, and lifting devices are all required in the fabrication and assembly of solid fuel rocket motors. Use finite element analysis (FEA) methods and tools to perform structural analysis of tools in order to predict internal stresses and resolve structural instabilities.
You will work cross-functionally with thermal and structures engineering teams and interface directly with program stakeholders to deliver high-quality, review-ready drawings and documentation that meet program requirements. In this role, you will be responsible for the design, modeling, and documentation of passive thermal insulation systems, including Multi-Layer Insulation (MLI), cryogenic MLI (cryo-MLI), and Spray-On Foam Insulation (SOFI).
Huntsville, AL30+ days ago
p>Job Description: This is a subject matter expert-level mechanical design engineering position with a focus on component and system design of filament wound composite cases for Solid Propulsion and Controllable Solids Systems. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Huntsville, AL30+ days ago
Job Description: This is a subject matter expert-level mechanical design engineering position with a focus on component and system design of filament wound composite cases for Solid Propulsion and Controllable Solids Systems. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Huntsville, AL22 days ago
p>The company has been recognized as a "Best Place to Work" in 2020 and 2021, and as a "Best Place for Working Parents" in 2022-2026 by the Huntsville/Madison County Chamber of Commerce. Design and implement complex software in C++, CUDA, and Python as defined from an architectural definition, ensuring efficiency, scalability, and maintainability; work products are to include documentation/modeling support with doxygen and UML.
p>As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense.
Huntsville, AL30+ days ago
li>Coordinate with senior engineers and program leadership to ensure assigned tasks remain aligned with cost, schedule, and performance constraints. - Contribute to technical documentation and design artifacts required to demonstrate progress and support program milestones.
Huntsville, AL30+ days ago
li>Partner with program leadership to ensure technical execution remains aligned with cost, schedule, and performance constraints. Demonstrated ability to communicate complex technical concepts clearly to both technical and non-technical audiences.
Huntsville, AL30+ days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Huntsville, Alabama3 days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Determines computer user needs; analyzes system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepares operating instructions; designs and develops compilers and assemblers, utility programs, and operating systems. Required Experience/Skills:
- CLA or equivalent LabVIEW experience, encompassing understanding and implementation of LabVIEW best practices, proficient LabVIEW object-oriented programming skills, and demonstrated experience in developing frameworks and/or overall program architectures which could then be re-used by less experienced developers.
Huntsville, AL30 days ago
As an Electrical Hardware Design Engineer, your duties will include the following, but are not limited to: Design, simulate, analyze, and test analog and digital electronic circuits, including power supplies, sensor interfaces, and control systems. Torch Technologies is seeking an Electrical Hardware Design Engineer to join our team and contribute to the design, development, and testing of complex electronic systems for defense and aerospace applications.
Huntsville, AL30+ days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Huntsville, AL30+ days ago
The candidate will grow the electronics design group to tackle a variety of projects including analog/digital circuit design, PCB layout, embedded systems, power electronics, RF engineering, and IC design. Based in Huntsville, Alabama where laboratory facilities and headquarters are located, CFD Research also has office and laboratory facilities in Dayton, Ohio, prototyping test and evaluation facilities in Hollywood, Alabama, and office facilities in Fort Walton Beach, Florida.
Huntsville, Alabama27 days ago
Company Overview: General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world. In addition to the benefits discussed above, the company offers the following voluntary benefits: Critical Illness Insurance, Accident Insurance, Identify Theft Protection, Enhanced Legal Services, Auto and Home Insurance, Pet Insurance, Commuter Benefits, Hospital Indemnity Insurance, Educational Assistance.
Huntsville, AL30+ days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. • Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the companys intent to reward individual contributions and enable them to share in the companys results, or other factors at the companys sole discretion.
Huntsville, Alabama25 days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Huntsville, Alabama30+ days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Huntsville, AL30+ days ago
Responsibilities Perform detailed engineering calculations including stress analysis, thermal analysis, and pressure equipment sizing Develop comprehensive technical specifications, design criteria, and engineering drawings Create and maintain code data reports, design documentation, and compliance records Review and approve vendor submissions for code compliance Design pressure vessels, piping systems, and related mechanical components in accordance with applicable codes Serve as the technical authority for code compliance, providing guidance to engineering teams Develop inspection and testing plans that meet requirements Support certification and recertification activities Evaluate non-conformances and develop technically sound resolution strategies Guide manufacturing teams on code-compliant fabrication techniques and requirements Mentor junior engineers on code application and compliance practices Minimum Qualifications Bachelor's degree in Mechanical Engineering or related engineering field 8+ years of mechanical design experience with at least 5 years focused on ASME code-compliant equipment Proficiency in GD&T principles per ASME Y14.5 Experience with engineering calculations for pressure-containing equipment Strong CAD skills with 3D modeling software (SolidWorks, NX, CATIA, or similar) Experience with FEA tools for stress analysis and structural validation Demonstrated ability to interpret and apply code requirements to complex design problems Experience working with quality assurance programs for pressure equipment Knowledge of material selection considerations for various operating conditions Familiarity with NDE methods and acceptance criteria Excellent technical writing and communication skills Strong problem-solving abilities and attention to detail Preferred Qualifications Master's degree in Mechanical Engineering or related field Experience with design and certification of high-pressure or cryogenic systems Background in aerospace, power generation, oil & gas, or process industries Experience with risk-based approaches Familiarity with welding engineering principles and ASME Section IX requirements Experience with fitness-for-service evaluations Knowledge of pressure relief device sizing and selection Experience with pressure testing procedures and test oversight Understanding of design requirements for specific services (hydrogen, oxygen, lethal service) Compensation Range for: WA applicants is $145,188.00 - $203,263.20 and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
Huntsville, AL30+ days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: • Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation • Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Huntsville, AL30+ days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.