UNKNOWN

FEED

Requires Master’s degree in Mechanical Engineering, Automotive Engineering, or Electrical Engineering and three years of experience as an engineer in the automotive industry. Gather and review stakeholder requirements and ensure the logical and systematic translation of these requirements into a total systems solution which meets scheduling, technical, and cost constraints.

Aptiv

Lead Systems Engineer

ea_via_bold

1 - 4 years' experience with analog/digital design and simulation experience; including, but not limited to: power supplies, filters, op-amps, vehicle communications (CAN & LIN), microprocessors, memory interfaces, high speed communications (I2C, SPI, UART, etc.). The Aptiv Connection Systems Team is looking for an Electrical Engineer to join the North America Product Engineering Team in our Troy Technical Center in Troy, MI or Champion Technical Center in Champion, OH.

Electrical Engineer

sourcestack_via_bold

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.

YEAR

Blue Origin

Propulsion Engineer II (BE-3U Valves)

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.

Principal Opto-Mechanical Engineer - TeraWave

You will partner with cross-functional teams across Engineering, Manufacturing, Quality, and Supply Chain to develop robust manufacturing solutions that support both new product launches and continuous improvement initiatives. The North American Connection Systems team is at the forefront of developing advanced manufacturing technologies and processes that transform product concepts into scalable, high-quality production solutions.

Advanced Manufacturing Engineer

We are a leading global provider of innovative automotive and industrial electronic products, including center stacks, switch banks, sensors, high-voltage busbars, Battery Disconnect Units (BDU), Integrated Circuit Boards (ICB), park brake actuators, ambient lights, and Center High-Mount Stop Lights (CHMSL). Vertical Busbar Engineering & Attributes: Optimize vertical busbar architectures for critical data center infrastructure, ensuring precise execution of core attributes: Electrical & Thermal: Manage high current density, skin effect, voltage drop constraints and short-circuit current ratings.

Methode Electronics Inc

Project Lead Engineer - High Voltage Industrial and Data Centers

linkup_via_bold

Aptiv empowers customers to create solutions people rely on—advancing safety and autonomy in Automotive and Commercial Vehicles, enabling mission-critical performance in Aerospace & Defense, and powering intelligent systems across Energy, Enterprise, and Telecommunications. Familiarity with product development process including: component testing / PPAP, functional dimensioning, geometric dimensions and tolerances (GD&T), dimensional stack-up including statistical applications, design failure mode and effects analysis (DFMEA).

Senior Mechanical Engineer

However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Mobis North America legal duty to furnish information. Mobis delivers the design and development of advanced engineering, autonomous driving, infotainment, component modules, safety, brake and steering systems, lamp, ICS/electronics and software development solutions that consider the safety and convenience of our customers as well as the future.

MOBIS NORTH AMERICA, LLC

Senior Systems Engineer (Oled) - Hybrid

Provide mechanical design engineering support in the following areas: vehicle structure, mechanical systems and integration of new equipment, tasks shall include: a) The design, development, integration, manufacturing and installation of new systems and equipment to the vehicle's internal and external structure (such as, but not limited to the hull, turret and body).b) The layout and design provisions for the integration of subsystems and equipment such as HVAC, communication equipment, computer equipment, vision systems, GPS, seat belts, stowage, brackets, mounts, survivability equipment and weapon systems.i)

ASRC Federal comprises a family of companies that provide mission-critical services to federal government agencies dedicated to defense, civil and intelligence support. Our customer-focused service delivery model and emphasis on operational excellence are foundational elements infused in all our companies. The reliability and quality of day-in, day-out service delivery from our family of companies ensure our customers that we keep our sights on their mission-critical priorities.

ASRC Federal Holding Company

Mechanical Engineer

The Project Engineer (Aerospace/ Defense) who wants to apply their design, manufacturing, and project management expertise in a strategic role on an Integrated Manufacturing Process and Product Development Team (IMPPDT) for a new commercial turbine engine. Williams International is a Drug Free Workplace where all new team members and contractors are subject to pre-employment drug testing for the following controlled substances: marijuana, cocaine, PCP, amphetamines, opioids and alcohol as policy dictates.

Williams International

Project Engineer (Aerospace/Defense)

Systems Engineer (OLED) - Senior (Hybrid)

Sr. Mechanical Engineer

Methode Electronics, Inc.

Project Lead Engineer - High Voltage Industrial And Data Centers

The candidate will also drive the adoption of Agentic AI within the QA lifecycle, leveraging AI agents to enhance test design, automate test generation and execution, improve defect analysis and root-cause identification, and enable intelligent, self-improving quality engineering practices across the SDLC. Detailed Job Description: We are seeking an experienced and highly motivated Engineer in QA to spearhead our API automation and AI-driven quality engineering efforts.

Looking for a great job? Join eTeam. We’re looking for talented staffing professionals to join our staff. We also provide contract assignments and full-time jobs at Fortune 2000 Companies. We’ve been named one of the best companies to work for by Staffing Industry Analysts and New Jersey Business.

eTeam Inc.

QA Automation Engineer

jobdiva

Tasks may include performing the analysis, development, and design of water transmission and distribution systems, pumping stations, wastewater conveyance systems, water/wastewater planning, master planning, condition assessment, and rehabilitation of conveyance infrastructure. Demonstrated proficiency in the design of water/wastewater/storm water pump stations including pump selection and sizing, piping configurations, hydraulic analysis, and integration of and with associated mechanical and electrical equipment and structural components.

Lead Conveyance Engineer-Mw Region

Project Engineer - Aerospace/Defense

The successful candidate will be able to support a diverse range of areas including, but not limited to, geotechnical design and analysis, civil design, earthworks construction, piping systems, surface water management, erosion and slope stability, and landfill permitting and design. Lead larger-scale more complex civil engineering projects ensuring contributors know what they are required to do and by when, preparing and overseeing relevant project budgets, monitoring external events, tracking hours and expenses, ensuring satisfactory performance, and supervising subcontractors, contract work, and employees.

Senior Civil Or Environmental Engineer

Like everything at Grounded, the goal is modularity — today each vehicle's electrical design is largely custom, and we need a universal electrical architecture (power, routing, connectors, protection) that lets customers add modules without a redesign every time. We're hiring a senior electrical engineer to own the electrical systems that make our vehicles work: high-voltage battery and charging, low-voltage power distribution, wiring, and integration of our onboard computer system.

Grounded RV

Senior Electrical Engineer

FULL_TIME

If you enjoy solving manufacturing challenges, analyzing processes, and developing practical engineering solutions, we encourage you to apply and join Design Systems, Inc. in helping manufacturers operate more safely and efficiently. Design Systems, Inc. is seeking an Industrial Engineer with 1–3 years of experience to improve manufacturing processes, facility layouts, labor efficiency, and production workflows.

Design Systems, Inc.

Industrial Engineer

Talent Acquisition

The employee is frequently required to stand, walk on sloped roofs, sit, climb ladders, bend, climb inside attics, crawl under homes and tunnels, balance, stoop, kneel, crouch, talk, hear, and drive a motor vehicle to job sites. The employee must be sharp, focused, and alert when conducting site inspections, speaking and interacting with clients, preparing written reports of findings, and testifying in deposition or trial.

Software Design Engineer Jobs in Detroit, MI

Lead Systems Engineer Aptiv

Electrical Engineer Aptiv

Propulsion Engineer II (BE-3U Valves) Blue Origin

Principal Opto-Mechanical Engineer - TeraWave Blue Origin

Advanced Manufacturing Engineer Aptiv

Project Lead Engineer - High Voltage Industrial and Data Centers Methode Electronics Inc

Senior Mechanical Engineer Aptiv

Senior Systems Engineer (Oled) - Hybrid MOBIS NORTH AMERICA, LLC

Mechanical Engineer ASRC Federal Holding Company

Project Engineer (Aerospace/Defense) Williams International

Systems Engineer (OLED) - Senior (Hybrid) MOBIS NORTH AMERICA, LLC

Sr. Mechanical Engineer Blue Origin

Project Lead Engineer - High Voltage Industrial And Data Centers Methode Electronics, Inc.

QA Automation Engineer eTeam Inc.

Lead Conveyance Engineer-Mw Region WSP

Project Engineer - Aerospace/Defense Williams International

Senior Civil Or Environmental Engineer WSP

Senior Electrical Engineer Grounded RV

Industrial Engineer Design Systems, Inc.

Forensic Electrical Engineer Rimkus

Similar Job Searches

See More Jobs

Stand out to leading employers.