UNKNOWN

FEED

PRINCIPAL DUTIES AND RESPONSIBILITIES: Investigates root cause solutions for product release through nonconformance reports (NCR), corrective and preventative actions (CAPA), material containment and hold forms (MCH) and affected lot hold forms (ALH). Preferred working knowledge of polymers (engineering and non) used for injection molding of medical components with processing and engineering experience in polymer molding and processing.

Fresenius Medical Care North America is a wholly owned subsidiary of Fresenius Medical Care AG & Co. KGaA, located in Bad Homburg, Germany. Through our dialysis services entity, Fresenius Medical Services, we operate more than 2,100 outpatient dialysis clinics in the U.S. Our Renal Therapies Group is responsible for the manufacture and distribution of a variety of dialysis products and equipment, including dialysis machines, dialyzers and other dialysis-related supplies. 

Fresenius Medical Care

Quality Engineer II

sourcestack_via_bold

Supports project requirements by providing complete and accurate engineering data (drawings, test plans, electrical load analysis, structural analysis, reports, parts lists and related supporting documents) that meets or exceeds all regulatory requirements and established project timelines. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified.\n \nCompany Description:\n \nDuncan Aviation is the largest, family-owned maintenance, repair and overhaul (MRO) facility in the world providing complete nose-to-tail services for business aircraft.

Duncan Aviation Inc

Structures Engineer

linkup_via_bold

The role is focused on helping clients improve operational efficiency, accelerate digital transformation, modernize OT environments, and unlock new value through digital twin, spatial intelligence, and Physical AI-enabled solutions. Our purpose comes through in our work with clients that enables impact and value in their organizations, as well as through our own investments, commitments, and actions across areas that help drive positive outcomes for our communities.

YEAR

Deloitte

Physical And Spatial AI Engineer III

ea_via_bold

From stadiums to manufacturing facilities, power plants to hospitals, concert halls to classrooms, we handle projects of all sizes and complexity from multiple regional locations across the country. Design Engineering: Lead on projects that include strategic and space planning, consulting, conceptual design, schematic design, design development, construction documentation and construction oversight.

Harris Companies

Lead Mechanical Engineer

Fresenius Medical Care AG & Co KGaA

Knowledge of trunking, circuit design, synchronous optical networking, team division multiplexing, T1's, integrated services digital network, Frame Relay, voicemail, private branch exchange administration and scripting, asynchronous transfer mode, and microwave and radio communication. Responsibilities include provisioning and programming of telecommunications or network equipment including microwave radios, MAS systems, fiber optic terminals, multiplexers, and network switches.

PacifiCorp

Telecom Engineer

Option 1: Hold a bachelor's or graduate degree in physical science, engineering, or biological science with at least 20 college credits in physical science; have at least five (5) years of professional experience in health physics (graduate training can substitute for up to two (2) years); pass an examination covering radioactivity, radiation biology, and radiation dosimetry. Option 2: Hold a master's or doctor's degree in physics, medical physics, or another physical science, engineering or applied mathematics; have two (2) years full-time practical training and/or supervised experience in medical physics; pass an examination that assesses knowledge in clinical diagnostic radiological or nuclear medicine physics and radiation safety.

At Boeing, you can build something better for yourself, our customers, and the world. Here you can transform aerospace and make history. And you’ll work alongside other experts and visionaries who lead and inspire. Our workforce includes every profession and career path you can imagine, taking you as far as you can dream. 

The Boeing Co

Radiation Effects Engineer

Familiarity with plant manufacturing including electrical / controls technology in a production and processing environment, RS232 and RS485 protocol, vision and barcode scanning systems. We are working to increase vehicle safety by developing seatbelts, airbags and steering wheels and you can be part of our team as Automation and PLC Engineer (Controls) .

Autoliv United States

Automation Engineer

This position is a subject matter expert for performing numerous technical tasks related to FCC licensing functions, including new frequency coordination and licensing, new or renewal applications (including tracking mobile radio frequency usage), assessing build-outs required to hold frequencies, tracking power line carrier frequencies/lines, responding to 3rd party transmission requests, tracking MAS master/remote radio locations, FCC database administration, FAA/FCC ASR applications, and general engineering design, configuration, and support of company's operational telecommunications systems. Basic knowledge of trunking, circuit design, synchronous optical networking, team division multiplexing, T1's, integrated services digital network, Frame Relay, voicemail, private branch exchange administration and scripting, asynchronous transfer mode and microwave and radio communication.

FCC Telecom Engineer-(I,II,III)

FULL_TIME

Work alongside the core IT team on systems and infrastructure initiatives beyond security, including Microsoft 365/Entra ID and identity administration, server and network projects, endpoint management, and other technology work that supports all business units. • Own security and infrastructure projects end to end: scope them, build the plan, coordinate vendors and internal stakeholders, drive them to agreed timelines, and keep leadership informed on status and risk.

SilencerCo

IT Security and Systems Engineer

Talent Acquisition

Project Management Overseeing the work performed by the assigned staff Planning, Scheduling, and Profitability Provides direction for what is to be included in the design package issue (pricing documents, SD, DD, and CD) Works with projects Lead Mechanical Engineer to ensure that project schedule will be met and complete documents provided for each submission Designs project within provided design budget and track additional hours utilized when the scope is expanded Professional Development Maintains required licensing CEU Proactively attempts to receive in-house/out-of-house training to maintain create design skills Leadership Manages assigned staff on the projects Works as part of the larger team, and not as an independent island. Travel Up to 20% annually Education/Experience: Bachelor's degree in mechanical engineering from an accredited university 7-10 years of relevant experience To thrive in this role, you'll need: Licensed Professional Engineer (P.E.) - Mechanical Engineering Knowledge of Building Systems HVAC and/or Plumbing Design Experience performing HVAC engineering calculations including heating/cooling load calculations, airflow/duct sizing and equipment selection Experienced utilizing Revit for 3D design Environmental Factors and/or Physical Requirements: While performing the duties of this job, this position is required to have ordinary ambulatory skills sufficient to visit other locations; and the ability to stand, walk, stoop, kneel, crouch, and manipulate (lift, carry, move) light to medium weights of 10-50 pounds.

The Haskell Co

Mechanical Engineer

Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. Document all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc.

External Dennis Group Jobs

Electrical Engineer Intern

Electrical Engineer Intern/Co-Op (Building power systems)

Develop preliminary plant designs, site layouts, and single-line diagrams working with internal CAD and interconnection teams for greenfield development, M&A, and RFP-support projects. They will support senior team members on technical and engineering matters for assigned projects and may serve as the lead project engineer at the discretion of the West region development engineering manager.

The AES Corp

Development Engineer

Dennis Group

Electrical Engineer Intern/Co-Op (Building Power Systems)

ADAPTED_NOW

For the past 50 years, Turner's Denver office has helped shape the Colorado skyline with projects such as Meow Wolf, Sports Authority Field at Mile High, and Rocky Mountain Regional Veterans Affairs Medical Center. Turner Construction is an industry leading commercial construction general contractor with a 120-year history spanning iconic projects around the globe, including 10 of the world's 100 tallest buildings.

TURNER LAYTON JV

Project Engineer (Corinne, UT)

Fairview Health Services

Roles & Responsibilities: Preparation and review of all engineering documentation within discipline including, but not limited to, the following documents, lists, calculations and detail drawings; Instrumentation and Controls Design Criteria, Control Philosophy and conceptual design of industrial control systems, Control Narratives, instrument index, I/O lists, instrumentation calculations, data sheets, specifications, selection and sizing, P&ID's, system architecture drawings, instrument location drawings, installation detail drawings, wiring and interconnection diagrams, ISA loop drawings, motor control schematics. Desirable: Experience with engineering tools such as SmartPlant Instrumentation (InTools, Intergraph), Plantspace P&ID (Intelligent P&ID's, Bentley, Microstation), 3D modeling (Bentley), and Relational Databases (administration & coordination).

Hatch Ltd.

Instrumentation & Controls Engineer

Collaborates with Project Management, design team, CAD department, vendors and clients to determine needs and solutions for continuous processing/ packaging systems and to develop specifications. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction.

Process Engineer II (Food & Beverage Industry)

Dennis Group Civil Engineers focus on the land development and infrastructure for our industrial projects that involve designing and building new food and beverage process facilities. The role is highly valuable at Dennis Group and faces engineering challenges that require strong calculation skills and for experienced engineers to have a Professional Engineer License (PE).

Civil Engineer Intern (Start Summer 2027)

Physical Requirements: This position often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, working at height, lifting up to 35 lbs., the ability to distinguish between colors and working with electricity, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. If you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at Accommodations_Program@amat.com, or by calling our HR Direct Help Line at 877-612-7547, option 1, and following the prompts to speak to an HR Advisor.

HOUR

<p>Applied Materials (Nasdaq: AMAT) is the leader in Materials engineering solutions used to produce virtually every new chip and advanced display in the world. Our expertise in modifying materials at atomic levels and on an industrial scale enables customers to transform possibilities into reality. At Applied Materials, our innovations make possible the technology shaping the future. To support customers around the world, Applied Materials employs approximately 22,000 people in over 100 locations in 18 countries.</p> 




Senior Manufacturing Engineer Jobs in Utah

Quality Engineer II Fresenius Medical Care

Structures Engineer Duncan Aviation Inc

Physical And Spatial AI Engineer III Deloitte

Lead Mechanical Engineer Harris Companies

Quality Engineer II Fresenius Medical Care AG & Co KGaA

Telecom Engineer PacifiCorp

Radiation Effects Engineer The Boeing Co

Automation Engineer Autoliv United States

FCC Telecom Engineer-(I,II,III) PacifiCorp

IT Security and Systems Engineer SilencerCo

Mechanical Engineer The Haskell Co

Electrical Engineer Intern External Dennis Group Jobs

Electrical Engineer Intern/Co-Op (Building power systems) External Dennis Group Jobs

Development Engineer The AES Corp

Electrical Engineer Intern/Co-Op (Building Power Systems) Dennis Group

Project Engineer (Corinne, UT) TURNER LAYTON JV

Instrumentation & Controls Engineer Hatch Ltd.

Process Engineer II (Food & Beverage Industry) External Dennis Group Jobs

Civil Engineer Intern (Start Summer 2027) External Dennis Group Jobs

Customer Engineer Applied Materials Inc

Similar Job Searches

Stand out to leading employers.