FULL_TIME

FEED

UNKNOWN

The Automation Technician partners closely with Maintenance, Operations, Engineering, Reliability, and Process teams to resolve equipment issues, support capital projects and outages, and drive continuous improvement initiatives that enhance safety, quality, productivity, and cost performance. This position serves as a technical resource for industrial automation equipment and process control systems, performing troubleshooting, repair, installation, programming, calibration, preventive maintenance, and system upgrades to maximize equipment reliability and plant performance.

Novelis Greensboro Manufacturing Facility

Automation Technician

[AW]-iCims

Minimum Qualifications: Associate degree in Electronics or related field; five years of experience in the maintenance and repair of analog and digital industrial control equipment, industrial electronics and test equipment; vocational training and seven years of experience; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this job. Purpose of Classification: The purpose of this classification is to perform highly skilled work as a lead technician in the installation, programming, maintenance, calibration, and repair of all electronic instruments, automatic process control and protective relaying equipment, and energy management systems in Water, Wastewater Treatment Plant and/or Distribution System/Collection System Remote facilities.

HOUR

DeKalb County

Electrical / Instrumentation Technician III

linkup_via_bold

Minimum Qualifications: Associate''s degree in Electronics; three years of experience in the maintenance and repair of analog and digital industrial control equipment, industrial electronics and test equipment; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this job. Calibrates, tunes, troubleshoots, repairs, installs, and integrates various flow and measuring equipment and microprocessor based instrumentation system components which monitor parameters such as pH, conductivity, temperature, turbidity, chlorine, dissolved oxygen, flow rate, level, water/air pressure.

Electrical / Instrumentation Technician II

Performs advanced troubleshooting, repair, installation, and maintenance of commercial HVAC equipment and systems, including air handlers, rooftop units, heat pumps, split systems, chillers, boilers, pumps, cooling towers, exhaust systems, refrigeration equipment, and associated mechanical components. Independently diagnoses and repairs complex electrical, electronic, pneumatic, and digital control systems, using meters, gauges, diagnostic equipment, schematics, wiring diagrams, and manufacturer documentation to identify and correct system deficiencies.

University of North Georgia

HVAC Technician IV

This is a field-based role ideal for a technically skilled professional who takes pride in quality workmanship, operates with a safety-first mindset, and is ready to contribute to a team with four-plus years of transformer work already in the pipeline. Our client, a nationally recognized leader in electrical power services, is seeking a NETA-certified (II, III, IV) Field Service Technician - or candidate with equivalent experience to join their growing Testing Department.

Southern Staffing Group

Field Service Technician- Apparatus

sourcestack_via_bold

This person should be comfortable performing PMs, troubleshooting equipment, completing repairs, using BAS/BMS systems, documenting work accurately, communicating with customers, coordinating with vendors, and protecting uptime in live critical environments. This position is designed for an experienced HVAC journeyman who can work independently, support critical facility operations, communicate effectively with customers and leadership, and help ensure mechanical systems operate safely and reliably.

ABM offers a wide variety of service-related positions, including electricians, HVAC technicians, security officers, parking attendants, and cleaning jobs. ABM cares about your success.

We provide training so that you learn new job skills and take pride in the quality service you're giving to clients. You'll look like the trained professional you are when you wear a ABM uniform.For your health and safety, we use non-toxic cleaning products and up-to-date equipment.

Our internal training program focuses on teaching you the skills and processes that have helped many of our employees starting out as a janitor, cashier, security officer or building engineer grow into various management roles throughout the company. These jobs aren't your everyday at ABM; they are careers.

Thousands of commercial, industrial, government and retail clients look to ABM for consistent quality service that meets their specialized facility service needs including commercial cleaning and maintenance, facility engineering, energy efficiency, parking and security services.

With fiscal 2011 revenues of approximately $4.2 billion and nearly 100,000 employees, our 300+ offices across the U.S. and various international locales enable us to provide custom facility solutions to sites of all sizes — from neighborhood banks and schools to the largest and most complex facilities, such as corporate office parks and major airports.

With more than 300+ offices located throughout the country, we are always accepting applications for janitorial maintenance, landscaping gardeners, security guards, parking attendants, shuttle drivers and building engineers.

ABM IS AN EQUAL EMPLOYMENT OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER (MINORITY/FEMALE/VETERAN/DISABILITY)

ABM Industries Inc

Critical Facilities Technician, HVAC

Perform basic field diagnostics: verify device connectivity, confirm recording, identify and resolve common activation issues using DMM and device diagnostic tools. 2-4 years of hands-on hardware installation experience - vehicle telematics preferred, vehicle audio/visual installations, 12V, alarm/security, HVAC, or similar.

Lytx Inc

Field Service Technician

KEYWORDS: Motorola, Kenwood, ICOM, Avigilon, Two-Way Radio, Two Way Radio, 2-Way Radio, GPS, VOIP, WI-FI, BDA/DAS, RF, UHF, VHF, MOTOTRBO, LMR, OSHA 10, FCC GROL, L3Harris, CET, Network+, Security+, P2P, P2MP, PtMP, P25, Astro25, PPE. Must physically be able to lift 50 lbs., maneuver into and out of heavy equipment and work on ladders and other elevated locations including at times standing for extended periods, and occasionally working outside in extreme temperatures.

BearCom, Inc.

Installation Technician Atlanta, GA

Coordinates with Controls manager, project managers, and customers to precisely understand requirements for all on-site installation and repairs by extensively examining building layouts, updating issues, gathering materials and synchronizing onsite work. • 5 Years of experience with electrical experience (120vac, 24vac, 24vdc and 12vdc) preferably with low voltage control systems, including experience with ladder logic, relay logic, controllers, and field controllable devices.

Certified Control Systems

ALC Controls Technician

ESSENTIAL FUNCTIONS: Implement the startup, commission, and re-commission of customer systems that utilize pneumatic / electrical / electronic technology• Maintain accurate As-Built drawing package and make changes in Visio, Excel, Word, as required• Responsible for calibration of systems requiring basic electronic test equipment, such as multi-meters, network terminals and/ or a laptop computer• Implement static (stand-alone) and dynamic (total building interactive network) commissioning of software programming• Set-up of operator workstations with all associated software• Manage process of turnover to service• Track and record job progress and keep lead project personnel informed on progress• Keep project management apprised of concerns and issues• Complete paperwork on-time including time sheets, expense reports, posting of work orders, on-site documentation and project status reports• End to end testing, programming, starting up, commissioning, and servicing on assigned projects and accounts.• Installation of HVAC automation systems required, knowledge base consisting of: Assist with job commissioning, start-up procedures and owner training if necessary• Prepares sketches showing as-built location of wiring and equipment• Attend project meetings as necessary• Ability to work overtime, varied shift hours and occasional travel as needed• Effectively able to read and interpret electrical and mechanical drawings• Communicate clearly and effectively with supervisor and crew members• Work independently and as a team member.

A provider of critical infrastructure systems, EMCOR gives life to new structures and sustains life in existing ones by its planning, installing, operating, maintaining, and protecting the sophisticated and dynamic systems that create facility environments—such as electrical, mechanical, lighting, air conditioning, heating, security, fire protection, and power generation systems—in virtually every sector of the economy and for a diverse range of businesses, organizations, and government.

EMCOR Group Inc

Experience with Electrical and Mechanical systems (turntables, palletizers, stretch wrapping machines, label printers, conveyor belts, automated weighing and packaging systems, VFD''s, Servo Motors, sensors, Hydraulic and Pneumatic systems, etc.). Able to tolerate working environment with inside controlled temperatures of minus 45 (-45) degrees Fahrenheit (-43 degrees Celsius) and outside ambient temperatures (including heat, cold, and precipitation).

AmeriCold Logistics LLC

Automation Maintenance Technician

Trainees will support routine and semi-routine tasks related to customer installations, infrastructure maintenance, and service delivery within the IBX data centers. For a successful conversion to a full-time employee, the targeted pay range for this position in the following location is / locations are: United States - DA11 Dallas: 53,600 - 80,400 USD / Annual.

 How can we ensure the vitality of the information-driven world? That's what our founders asked in 1998, when the Web was revolutionizing information-sharing between businesses—and exceeding its capacity for growth. The answer? Use their expertise to offer businesses a place to reliably run their operations and securely exchange critical information. 

Equinix

SkillBridge - Data Center Technician - Trainee - Cohort Q1' 2027

PageUp

Equinix Inc

SkillBridge - Data Center Technician - Trainee - Cohort Q1'''' 2027

Trainees will support routine and semi-routine tasks related to customer installations, infrastructure maintenance, and service delivery within the IBX data centers. For a successful conversion to a full-time employee, the targeted pay range for this position in the following location is / locations are: United States- DA11 Dallas: 53,600 - 80,400 USD / Annual.

Equinix, Inc.

Skillbridge - Data Center Technician - Trainee - Cohort Q1' 2027

ea_via_bold

Coordinate with the Facilities Lead and support all contracted facility services, including planning, inspections, audits, and vendor activities related to HVAC systems, docks, roofs, elevators, and other building systems. Please note that occasional work outside of normal scheduled hours may be required during plant shutdowns, equipment breakdowns, or other critical maintenance situations when production lines are down.

Kerry Group plc

Maintenance Technician - 8Hr Day shift

Minimum Qualifications: Associate's degree in Electronics; three years of experience in the maintenance and repair of analog and digital industrial control equipment, industrial electronics and test equipment; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this job. Calibrates, tunes, troubleshoots, repairs, installs, and integrates various flow and measuring equipment and microprocessor based instrumentation system components which monitor parameters such as pH, conductivity, temperature, turbidity, chlorine, dissolved oxygen, flow rate, level, water/air pressure.

DeKalb County (GA)

Ensure the property is maintained in accordance with all applicable Affordable Housing programs, including but not limited to HUD Subsidy, USDA, RD, LIHTC, HOME and other state and local programs. The Maintenance Technician is responsible for performing repairs, troubleshooting, and performing preventative maintenance of all apartment equipment including appliances, elementary electrical systems, and plumbing.

Ledic Management Group

Maintenance Technician

Calibrates, tunes, troubleshoots, repairs, installs, and integrates various flow and measuring equipment and microprocessor based instrumentation system components which monitor parameters such as pH, conductivity, temperature, turbidity, chlorine, dissolved oxygen, flow rate, level, water/air pressure. Associate's degree in Electronics; three years of experience in the maintenance and repair of analog and digital industrial control equipment, industrial electronics and test equipment; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this job.

Dekalb County

IRecruitee

JOB OVERVIEW: Under the supervision of the Equipment Maintenance Foreman, the Equipment Technician inspects, services, and repairs electrical, electronic, mechanical, structural, and hydraulic systems for ship to shore cranes (STS), rail mounted gantry cranes (RMG), rubber-tired gantry cranes (RTG), shuttle trucks, and associated equipment. To include: DC and AC circuits, motors, drive systems, generators, alternators, programmable logic controllers, limit switches, lights, resistor banks, wiring and alarm systems, fiber-optic cables, load cell systems, hydraulic systems, gear reducers, fans, bearings, clutches, wheels, brakes, drums, wire ropes, and diesel engines.

Security Alarm Technician Jobs in Georgia

Automation Technician Novelis Greensboro Manufacturing Facility

Electrical / Instrumentation Technician III DeKalb County

Electrical / Instrumentation Technician II DeKalb County

HVAC Technician IV University of North Georgia

Field Service Technician- Apparatus Southern Staffing Group

Critical Facilities Technician, HVAC ABM Industries Inc

Field Service Technician Lytx Inc

Installation Technician Atlanta, GA BearCom, Inc.

ALC Controls Technician Certified Control Systems

ALC Controls Technician EMCOR Group Inc

Automation Maintenance Technician AmeriCold Logistics LLC

SkillBridge - Data Center Technician - Trainee - Cohort Q1' 2027 Equinix

SkillBridge - Data Center Technician - Trainee - Cohort Q1'''' 2027 Equinix Inc

Skillbridge - Data Center Technician - Trainee - Cohort Q1' 2027 Equinix, Inc.

Maintenance Technician - 8Hr Day shift Kerry Group plc

Electrical / Instrumentation Technician II DeKalb County (GA)

Electrical / Instrumentation Technician III DeKalb County (GA)

Maintenance Technician Ledic Management Group

Electrical / Instrumentation Technician II Dekalb County

Equipment Technician - OT Georgia Ports Authority

Similar Job Searches

Stand out to leading employers.