NewStructural Design Engineer EIT NucorStructural Design Engineer EITBrigham City, UTOur brands include American Buildings, CBC Steel Buildings, Kirby Building Systems, and Nucor Building Systems. On-Site Fabrication Shop: For many of our divisions, the fabrication shop is conveniently located on-site, allowing you to see your designs come to life and ensuring quality control throughout the.
Sentinel - Principal Systems Safety Engineer - 17585 Northrop Grumman CorpSentinel - Principal Systems Safety Engineer - 17585Roy, UT5 years of experience with a Bachelors of Science degree, 3 years with a Masters, 1 year with a Doctorate degree in science, engineering, applied mathematics, computer science, aeronautics, safety, or closely related technical discipline. Must have an active U.S. Government DoD Secret security clearance at time of application, current and within scope, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need.
Sentinel Systems / Principal Systems Safety Engineer - 17891 - 17900 Northrop Grumman CorpSentinel Systems / Principal Systems Safety Engineer - 17891 - 17900Roy, UTPreferred Qualifications: System Safety Engineering experience conducting comprehensive system safety analyses IAW MIL-STD-882E, including Preliminary Hazard Analysis (PHA), Functional Hazard Analysis (FHA), System Hazard Analysis (SHA), and Operating & Support Hazard Analysis (O&SHA) to ensure compliance and mitigate operational risks. What Youll Get To Do: The Sentinel program has an exciting opportunity for a Systems/ Principal Systems Safety Engineer to join the team supporting activities including use case development, requirements definition / allocation, functional decomposition, interface definition, verification & validation, and requirements traceability.
Sentinel - Systems Safety Engineer - 17910* Northrop Grumman CorpSentinel - Systems Safety Engineer - 17910*Roy, UT$79,300–$118,900 / yearSentinelsystems Primary Level Salary Range: $79,300.00 - $118,900.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions. RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people''s lives around the world today, and for generations to come.
NewSentinel - Principal Systems Safety Engineer - 18396* Northrop Grumman CorpSentinel - Principal Systems Safety Engineer - 18396*Roy, UT$108,800–$163,200 / yearPreferred Qualifications: 2+ years' System Safety Engineering experience conducting comprehensive system safety analyses IAW MIL-STD-882E, including Preliminary Hazard Analysis (PHA), Functional Hazard Analysis (FHA), System Hazard Analysis (SHA), and Operating & Support Hazard Analysis (O&SHA) to ensure compliance and mitigate operational risks. What you will get to do: The Sentinel program has an exciting opportunity for a Systems Engineer to join the team supporting activities including use case development, requirements definition / allocation, functional decomposition, interface definition, verification & validation, and requirements traceability.
NewSpecialist, Systems Engineer - Reliability, Availability, Maintainability and Safety Engineer L3Harris TechnologiesSpecialist, Systems Engineer - Reliability, Availability, Maintainability and Safety EngineerLayton, UTResponsible for the performance of hardware/software analyses and assessments, technical documentation and presentation materials including, but not limited to: Reliability Predictions, Maintainability Predictions, Failure Modes Effects & Criticality Analyses (FMECA), and various Safety Analyses. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Logistics Health Safety and Sustainability Engineer Autoliv IncLogistics Health Safety and Sustainability EngineerOgden, UTAs a key partner to operations, leadership, and logistics providers, you will drive risk reduction, compliance, and a strong safety culture across multiple locations. We are looking for an experienced HSE&S Engineer to lead and enhance Health, Safety, Environment & Sustainability programs across our U.S. cross-dock operations.
Health Safety and Sustainability Engineer Autoliv IncHealth Safety and Sustainability EngineerOgden, UTOur training and development programs emphasize technical competency, leadership development and business management skill. You'll partner closely with leadership, employees, contractors, and 3PL providers to ensure safe, compliant, and sustainable operations.
Logistics Health Safety and Sustainability Engineer Autoliv United StatesLogistics Health Safety and Sustainability EngineerOgdenAs a key partner to operations, leadership, and logistics providers, you will drive risk reduction, compliance, and a strong safety culture across multiple locations. We are looking for an experienced HSE&S Engineer to lead and enhance Health, Safety, Environment & Sustainability programs across our U.S. cross-dock operations.
Health Safety and Sustainability Engineer Autoliv United StatesHealth Safety and Sustainability EngineerOgdenOur training and development programs emphasize technical competency, leadership development and business management skill. You’ll partner closely with leadership, employees, contractors, and 3PL providers to ensure safe, compliant, and sustainable operations.
Sentinel - Principal / Sr Principal Systems Safety Engineer - 17892 - 17899 Northrop Grumman CorpSentinel - Principal / Sr Principal Systems Safety Engineer - 17892 - 17899Roy, UTPreferred Qualifications: 2+ years System Safety Engineering experience conducting comprehensive system safety analyses IAW MIL-STD-882E, including Preliminary Hazard Analysis (PHA), Functional Hazard Analysis (FHA), System Hazard Analysis (SHA), and Operating & Support Hazard Analysis (O&SHA) to ensure compliance and mitigate operational risks. Principal Systems Engineer: Bachelors degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of experience with Bachelors degree, 3 years of experience with Masters degree, 1 year with a PhD.
Railroad Safety Flagger UP North RAILPROS IncRailroad Safety Flagger UP NorthNorth Salt Lake, UTEssential Duties & Responsibilities: Provide the required jobsite protection on each assignment, error free and consistent with the rules; including but not limited to radio communication with train dispatchers and engineers, ensuring work groups are clear of limits during train movements, granting permission for trains and on track equipment to proceed through limits. Job Summary: The Roadway Worker in Charge (RWIC) position will perform on site roadway worker protection for activities on and around live railroad tracks and are responsible for job site coordination, dispatcher/train communication and various types of On Track Safety in controlled and non-controlled track areas.
Sentinel Deputy Program Manager Systems Safety Engineering Manager 3- 18665 Northrop Grumman CorpSentinel Deputy Program Manager Systems Safety Engineering Manager 3- 18665Roy, UT$166,700–$250,100 / yearThe Sentinel program has an exciting opportunity for a Systems Engineer to join the team supporting activities including use case development, requirements definition / allocation, functional decomposition, interface definition, verification & validation, and requirements traceability. The candidate will have experience in generation or review of design artifacts to support System Safety analyses utilized in maturing weapons system design for safety and support flight test and flight worthiness of complex systems.
Health Safety and Sustainability Supervisor Autoliv IncHealth Safety and Sustainability SupervisorOgden, UTOur training and development programs emphasize technical competency, leadership development and business management skill. Bachelor's degree in Engineering (Mechanical, Electrical, Industrial, Chemical, or related) or equivalent technical background.
Health Safety and Sustainability Supervisor Autoliv United StatesHealth Safety and Sustainability SupervisorOgdenOur training and development programs emphasize technical competency, leadership development and business management skill. Bachelor’s degree in Engineering (Mechanical, Electrical, Industrial, Chemical, or related) or equivalent technical background.
On Site Environment, Health & Safety Manager Oatly ABOn Site Environment, Health & Safety ManagerOgden, UTIt's us, the original oatmilk company that started in Sweden back 25 or so years ago and has since expanded to the U.S. where we've continued growing at a rate such that we need more brilliant minds to come work with us to keep the momentum going and the oatmilk flowing. You are a self-starter who doesn't need direct supervision to motivate you for success - we believe strongly in building a culture of individual accountability and ownership and need partners that can embrace that mentality.
Health & Safety Manager Sierra Forest ProductsHealth & Safety ManagerSalt Lake City, UT$90,000–$110,000At Sierra Forest Products, we’re more than a leading North American distributor of specialty wood products—we’re a team committed to professionalism, care, and creating spaces that enhance lives and the health of the planet. Facilitate various training programs including, but not limited to, orientation, mobile equipment, crane, material handling, workplace specific hazardous material information systems, as well as several others as required.
Airport Civil Construction Engineer Salt Lake City CorpAirport Civil Construction EngineerUT$114,750–$135,498 / yearServes as the Owner's on-site engineering representative during construction, with a primary responsibility for field-based coordination, technical interpretation, and resolution of construction-phase issues, including review of RFIs, submittals, and field conditions for alignment with design intent, constructability, and operational impacts. Job Description: As a registered Professional Engineer (PE), Certified Construction Manager (CCM), or Project Management Professional (PMP), serves as the Owner's field-based Civil Construction Engineer for complex airport capital improvement projects, with a primary focus on construction-phase execution.
NewSenior Mechanical Fire Protection Engineer GAS Global ServicesSenior Mechanical Fire Protection EngineerOgden, UT$58.60–$126.70 / hourThis role develops calculations, construction drawings, Fire Protection Design Analysis Reports (FPDAR), tailored Unified Facilities Guide Specifications (UFGS), requisition specifications, reviews and approves subcontractor submittals, and assists with determining needed changes and final testing. Mechanical Fire Protection Engineer will prepare design and procurement documents relating to Fire Protection and provide technical leadership in the design and development of fire protection systems and equipment for the Sentinel project.
Project Engineer Bechtel CorpProject EngineerOgden, UTExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world''s infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. A major contractor for the United States and allied governments, Bechtel has handled such efforts as chemical weapons demilitarization projects, missile-defense, infrastructure, base operations, procurement and project management, and restoration and recovery spanning half a century.
FT - Airport Principal Engineer - Airport Division OGDEN CITY OFFT - Airport Principal Engineer - Airport DivisionOgden, UTEmployees will be required to complete NIMS IS100 IS200 ICS300 ICS400 IS700 IS701 IS702 IS703 IS704 IS706 IS775 IS803 and IEMC courses, position-specific ICS courses based on assignment, within two years of hire. Language Pay Holidays Sick Vacation and Comp Time Leave Medical and Dental EAP - Employee Assistance Program Life Insurance Long-Term Disability Employee Loan Program - Computer Bike & Exercise equipment loans when available Wellness Program Tuition Reimbursement.
Quality Engineer The Kemtah Group, Inc.Quality EngineerOgden, UTJob Title: Quality Engineer Location: Ogden, UT 84404 Pay: $60,000 - $90,000/yr (DoE - plus annual bonus opportunity) Zip Code: 84404 Start Date: ASAP Job Type: Direct, Full-Time Quality Engineer: Our client, a leading aerospace manufacturer, is seeking a Quality Engineer to join its team in Ogden, Utah. - Experience with: AS9100 Quality Management Systems, NADCAP accreditation requirements, Statistical, Process Control (SPC), Root Cause Analysis, Corrective and Preventive Actions (CAPA) - Experience working directly with customers and suppliers to resolve technical and quality issues.
Manufacturing Engineer ll The Kemtah Group, Inc.Manufacturing Engineer llOgden, UTJob Title: Manufacturing Engineer II Location: Ogden, UT 84404 Pay: $80,000 - $120,000/yr (DoE - plus annual bonus opportunity) Zip Code: 84404 Start Date: ASAP Job Type: Direct, Full-Time Manufacturing Engineer II Our client, a leading aerospace manufacturer, is seeking a Manufacturing Engineer II to join its engineering team in Ogden, Utah. - Experience with one or more of the following manufacturing processes: Machining, Sheet Metal Forming, Welding, Brazing, Heat Treat, Vacuum Furnace Operations, NDT, Laser Processing, EDM - Experience with titanium, nickel alloys, superalloys, or other aerospace materials is a plus.
NewManufacturing Engineer II BarnesManufacturing Engineer IIOgden, UTEnsure all manufacturing processes (i.e. welding, heat treat, braze, vacuum furnace, NDT, laser, EDM, etc.) and tooling conform to customer, organizational, and governmental regulations . 3 years of manufacturing engineering experience required, with a preference in basic manufacturing operations, machining, forming, welding, brazing and/or heat treat.
ICBM-S - Staff Systems Engineer - Sustaining Engineering - 17749* Northrop Grumman CorpICBM-S - Staff Systems Engineer - Sustaining Engineering - 17749*Clearfield, UT$152,900–$229,300 / yearWhat you will get to do: The Sustaining Engineering Staff Systems Engineer is responsible for leading the ICBM Operational Software Sustainment Program (IOSSP) engineering team in the design, development, and delivery of solutions that meet government requirements. Experience sustaining long term service life systems through application of logistics practices including component performance monitoring, spares/resource monitoring, analytic forecasting, DMSMS, and alternate source/component replacement solutions.
GSSC - Sustaining Engineering Sr. Staff Systems Engineer Northrop Grumman CorpGSSC - Sustaining Engineering Sr. Staff Systems EngineerClearfield, UT$152,900–$229,300 / yearExperience sustaining long term service life systems through application of logistics practices including component performance monitoring, spares/resource monitoring, analytic forecasting, DMSMS, and alternate source/component replacement solutions. What you will get to do: The Sr Staff Engineer Systems - Sustaining Engineering is responsible for leading the Remote Visual Assessment (RVA) engineering team in the design, development, and delivery of solutions that meet government requirements.
Process Engineer III Innophos Holdings IncProcess Engineer IIINorth Salt Lake, UTMaintain safe and environmentally sound operation of units through periodic safety meetings, encourage reporting of all incidents, investigation, and corrective actions proposal for all incidents, as well as ensuring that no major environmental incidents occur via proper inspections. Develop and/or assist others in developing workable process solutions to meet the requirements of the business (e.g., increased capacity, new product development, reduced costs, improved quality, improved process safety, improved environmental impact).
FT - Airport Principal Engineer - Airport Division Ogden City CorporationFT - Airport Principal Engineer - Airport DivisionOgden, UT$88,090.33–$127,730.98 / yearEmployees will be required to complete NIMS IS100, IS200 ICS300, ICS400, IS700, IS701, IS702, IS703, IS704, IS706, IS775, IS803, and IEMC course(s), position specific ICS courses based on assignment within two years of hire. Must possess the visual ability to see clearly at close (less than 20 inches) distances, identify and distinguish colors, observe an area that can be seen up and down or left and right while eyes are fixed upon a given point, and adjust the eye to bring an object into sharp focus.
Nuclear Surety Engineer Science Applications International CorpNuclear Surety EngineerUTSAIC is seeking a motivated and detail-oriented Nuclear Surety Engineer to provide critical support to one of the Department of Defense's most complex and vital acquisition efforts - the Sentinel Intercontinental Ballistic Missile (ICBM) Program. Our robust portfolio of offerings across the defense, space, intelligence, and civilian markets includes secure high-end solutions in mission IT, enterprise IT, engineering services, and professional services.
NewCivil Engineer PacifiCorpCivil EngineerSALT LAKE CITY, UT$77,200–$140,250 / yearDevelops engineering studies, plans, specifications, calculations, evaluations, design documents, and performance assessments associated with the planning, design, licensing, construction, operation, and maintenance of the company's generation, transmission, distribution, telecommunication, or other utility facilities/systems. Strong project management and leadership skills, including the ability to work effectively as both a team member and project lead, manage schedules and budgets, mitigate risks, and consistently deliver on commitments.
NewSenior Electrical Engineer Edgewater Technical AssociatesSenior Electrical EngineerOgden, UtahEdgewater has a proven track record and is a trusted provider of fixed-price construction projects, engineering, and technical services for the Department of Energy (DOE), National Nuclear Regulatory Commission (NRC), Canadian Commercial Nuclear Industry, and private sector commercial contractors involved in nuclear, high-hazard, or complex operations. Founded in 2003, Edgewater Technical Associates, LLC (Edgewater) is a New Mexico-based small business headquartered in Los Alamos, NM, with five (5) regional offices across the United States to locally support our growing presence at project sites.
Senior Mechanical Fire Protection Engineer (DOD Project) Johnson Service GroupSenior Mechanical Fire Protection Engineer (DOD Project)Ogden, UTSupport the development and maintenance of the Fire Protection Design Analysis Report (FPDAR) for the facilities utilizing recognized fire protection industry approaches, methodologies, calculations, and analyses. This program is modernizing the ground-based leg of the U.S. nuclear deterrent triad, including intercontinental ballistic missile (ICBM) systems and launch infrastructure.
Professional Structural Engineer Nucor CorporationProfessional Structural EngineerBrigham City, UtahWith multiple locations throughout the United States, NBG is proud to design world-class building solutions tailored to meet the needs of any market including commercial, industrial, agricultural, and institutional. Nucor Buildings Group (NBG), a proud Nucor product group, is one of North America's largest and most experienced manufacturers of metal building systems.
Manufacturing Engineer I Karman Holdings IncManufacturing Engineer IOgden, UTHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. To conform to U.S. Government export regulations, certain positions may require applicants to be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Engineer Rantec Power Systems Inc.Manufacturing EngineerLayton, UTFull timeTherefore, employment is contingent on compliance with ITAR regulations and successfully obtaining and maintaining the necessary export authorization license from the U.S. Department of Commerce’s Bureau of Industry and Security, U.S. Department of State’s Office of Defense Trade Controls, or other applicable government agency. Photo-document production processes and create detailed Assembly Instructions (AI), Manufacturing Operation Instructions (MOI), Training Cources (TC), Job Breakdown (JB), Process Control Plan (PCP) and other technical documentations to control the method of manufacturing.
Electrical Engineer- Generation PacifiCorpElectrical Engineer- GenerationSALT LAKE CITY, UT$88,000–$150,800 / yearDevelop moderately complex electrical engineering studies, plans, specifications, calculations, evaluations, design documents, and Determine methods and techniques for obtaining results. Under limited direction be responsible for overseeing the specification, design, and maintenance of the following thermal generation electrical equipment: Generator Step Up, Startup, and Auxiliary Transformers.
NewManufacturing Engineer PETERSEN INCORPORATEDManufacturing EngineerOgden, UTThe ideal candidate brings experience in fabrication processes-welding, machining, forming, cutting, and assembly-along with the ability to lead cross-functional improvement initiatives that deliver measurable results. The Manufacturing Engineer is responsible for optimizing production processes, supporting daily manufacturing operations, and driving continuous improvement across the metal fabrication environment.
Automation PLC Engineer PEAK Technical Services Inc.Automation PLC EngineerOgden, UT$85,000–$110,000 / yearDesign, develop, and implement control systems for automated manufacturing equipment, including robotics, PLCs, HMIs, and motion control systems. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://peaktechnical.com/privacy-policy/ and https://peaktechnical.com/ca-residents-privacy-rights/ .
Mechanical Fire Protection Engineer GAS Global ServicesMechanical Fire Protection EngineerOgden, UT$43.50–$94.03 / hourYou will develop calculations, construction drawings, Fire Protection Design Analysis Reports (FPDAR), tailored Unified Facilities Guide Specifications (UFGS), requisition specifications, review and approve sub-contractors’ submittals, and assist in determining needed changes and with final testing. In this role, you will prepare design and procurement documents relating to Fire Protection and provide technical leadership in the design and development of fire protection systems and equipment for the Sentinel project.
NewLead Process Engineer Kimberly-ClarkLead Process EngineerOgden, Utah$87,260–$107,780 / yearProvide technical leadership for sector-wide Overall Equipment Effectiveness improvement initiatives by identifying optimization opportunities, developing and executing action plans, and driving accountability across Baby Child Care assets. For Kimberly-Clark to grow and prosper, we must be an inclusive organization that applies the diverse experiences and passions of its team members to brands that make life better for people all around the world, which is why we seek to build a workforce that encompasses the experiences of our consumers.
Intermediate Cathodic Protection Engineer Acuren Inspection, Inc.Intermediate Cathodic Protection EngineerNorth Salt Lake, UtahRemoteFull timeExtreme cold and extreme heat environmental conditions, in and near hazards to include proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places in excess of 100 feet, exposure to high heat, extreme cold, or exposure to chemicals, in conditions that affect the respiratory system or the skin such as fumes, odors, dust, mists, gases, or poor ventilation. Committed to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services.
Quality Engineer Spirax Group plcQuality EngineerOgden, UTYour Responsibilities: Specialize in quality control engineering, including design, incoming material, process control, product evaluation, systems performance, hardware performance, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative application. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.
Sr. Mechanical Fire Protection Engineer Bechtel CorpSr. Mechanical Fire Protection EngineerOgden, UTExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the worlds infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. You will develop calculations, construction drawings, Fire Protection Design Analysis Reports (FPDAR), tailored Unified Facilities Guide Specifications (UFGS), requisition specifications, review and approve sub-contractors submittals, and assist in determining needed changes and with final testing.
Mechanical Fire Protection Engineer Bechtel CorpMechanical Fire Protection EngineerOgden, UTExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world''s infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. You will develop calculations, construction drawings, Fire Protection Design Analysis Reports (FPDAR), tailored Unified Facilities Guide Specifications (UFGS), requisition specifications, review and approve sub-contractors' submittals, and assist in determining needed changes and with final testing.
NewSenior Pipe Stress Engineer - 3068* Edgewater Technical AssociatesSenior Pipe Stress Engineer - 3068*Ogden, UtahEdgewater has a proven track record and is a trusted provider of fixed-price construction projects, engineering, and technical services for the Department of Energy (DOE), National Nuclear Regulatory Commission (NRC), Canadian Commercial Nuclear Industry, and private sector commercial contractors involved in nuclear, high-hazard, or complex operations. Founded in 2003, Edgewater Technical Associates, LLC (Edgewater) is a New Mexico-based small business headquartered in Los Alamos, NM, with five (5) regional offices across the United States to locally support our growing presence at project sites.
Design Engineer Major Tool & Machine, IncDesign EngineerOgden, UTThe Design Engineer develops and validates custom equipment, structures, and mechanical systems with an emphasis on mechanical design, engineering analysis, and real-world performance validation. Responsibilities include creating designs in SolidWorks, performing hand calculations and FEA, defining engineering requirements, and coordinating physical validation testing.
Structural Engineer - 5 Northrop Grumman CorpStructural Engineer - 5UT$152,900–$229,300 / yearCreate engineering drawings and specifications to define design for hardware fabrication, write test plans, support fabrication efforts, oversee testing, analyze test data and make revisions to design based on results. NASA Integration Design team is responsible for designing hardware and processes that facilitate the assembly of the Space Launch System (SLS) solid rocket motor hardware and integrate the motor to the full SLS assembly at Kennedy Space Center.
On-Site Flight Systems Test Engineer (Hill AFB, Utah) Johns Hopkins University Applied Physics Laboratory LLCOn-Site Flight Systems Test Engineer (Hill AFB, Utah)UTIn doing so, you will maintain regular communications with APL's program and project managers, line-side leaders and organizations in Laurel, and fellow members of the APL on-site technical team to increase awareness of Sentinel activities, developments, decisions, areas of concern, and opportunities where APL can help the Sentinel program. You will interface directly with the sponsor to understand their needs, and work with APL's Sentinel key leaders and fellow members of APL's on-site technical team to recommend, support, and execute work in support of the Sentinel Program Office's desire to "own the technical baseline.".
Network Engineer Jt4 LLCNetwork EngineerUTA Bachelor of Science in Engineering from an ABET-accredited academic institution and eight (8) years of related engineering experience, or an accredited Master of Science in Engineering and a minimum of six (6) years of related engineering experience, or an accredited doctorate degree in engineering and a minimum four (4) years of related engineering experience are required for this position. Engineer Network Security: Engineer and implement network security baselines, including access control and firewall integration (e.g., Palo Alto, Juniper SRX, Cisco ASA), and architect the network routing infrastructure to support DoD Suite A/B encryption environments.
Process Engineer III InnophosProcess Engineer IIINorth Salt Lake, UtahThe benefits set forth in this posting reflect Innophos’ current benefits for similarly situated employees, are subject in all respects to the terms and conditions of the applicable program policies and may be modified or discontinued by Innophos in the future (subject to applicable law).About InnophosInnophos is a leading international producer of specialty ingredient solutions that deliver far-reaching, versatile benefits for the food, health, nutrition and industrial markets. Maintain safe and environmentally sound operation of units through periodic safety meetings, encourage reporting of all incidents, investigation, and corrective actions proposal for all incidents, as well as ensuring that no major environmental incidents occur via proper inspections.