UNKNOWN

FEED

Ability to read, write, and communicate effectively in English.1+ years Aviation, manufacturing, or quality inspection experience.1+ years years of dimensional and visual inspection experience on aviation-related equipment, components, or assemblies. We're looking for a Quality Control Inspector to perform in-process inspections and quality verification activities that ensure aerospace components meet engineering, customer, and regulatory requirements.

Chromalloy Gas Turbine

Aerospace QC Inspector 1St Shift

ea_via_bold

The Quality Inspector identifies and documents nonconformances, supports resolution of quality issues, and applies sound inspection practices to maintain product conformity, traceability, and continuous improvement across aerospace, defense, space, and commercial manufacturing programs. ITAR Requirement: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder) as defined by 8 U.S.C. 1101(a)(20), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future.

HOUR

Rock West Composites, Inc.

Quality Inspector

Were looking for a Quality Control Inspector to perform in-process inspections and quality verification activities that ensure aerospace components meet engineering, customer, and regulatory requirements. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations.

Chromalloy Gas Turbine LLC

Inspection - QC Inspector 1st shift

FULL_TIME

Qualifications & Experience5+ years of experience in commercial construction required5+ years of experience in construction safety management at the jobsite level (experience with DoD projects is preferred) A combination of relevant work experience, hands-on training, and/or occupational safety certification programs is requiredDocumented safety training averaging at least 24 hours annually over the past 5 years requiredProficiency in Microsoft Office and general computer applications Current CPR, First Aid, and OSHA 30 certifications (within the last 5 years) requiredCompetent person training or experience in Fall Protection, Confined Space, Electrical, Trenching/Excavation, PPE and Scaffolding required. Other related professional degrees or certificates will be considered "in lieu of" competent person trainingPrevious experience with NAVFAC, USACE, and EM385-1-1 clients strongly preferredComputer proficiency with Microsoft Office, Outlook, and internet applications requiredFamiliarity with RMS/QCS and Viewpoint software preferredJoin RQ, apply today!

YEAR

RQ Construction

Construction Site Safety Manager/Trainer (SSHO)

Talent Acquisition

Per diems: Expenses will be covered at cost if inspection site is beyond round trip 200 miles from Inspector place of residence and requires overnight stay at hotel. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world.

SGS SA

Welding / Mechanical Inspector

Strong communication skills are essential, as you’ll collaborate with clients, field staff, and team members to ensure safety compliance and foster a healthy work environment. We are seeking a Project Industrial Hygienist I who is a skilled communicator and proactive problem-solver, ready to take on complex asbestos, lead, and mold assessments.

A-Tech Consulting

Project Industrial Hygienist - CSST, CAC, CDPH, Mold Inspector

Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Suppression life safety product lines as well as similar competitive manufacturers’ product lines. If you are an individual with a disability and you require an accommodation during the application process, please visit SpecialAccommodations@jci.com?subject=Candidate%20Accommodated%20Requested&body=Hello%2C%20%0A%0AI've%20applied%20to%20an%20opportunity%20and%20require%20an%20accommodation%20during%20the%20application%20process.

Johnson Controls is a global diversified technology and multi industrial leader serving a wide range of customers in more than 150 countries. Our commitment to sustainability dates back to our roots in 1885, with the invention of the first electric room thermostat. We are committed to helping our customers win everywhere, every day and creating greater value for all of our stakeholders through our strategic focus on buildings.

Johnson Controls

Fire Sprinkler Inspector

This role performs incoming, in-process, and final quality inspections throughout the manufacturing cycle, maintaining the accurate documentation and nonconformance reporting that underpins SkinHealth Systems' ISO 13485-certified Quality Management System. Perform inspection and testing activities during First Article Inspections (FAI), Incoming Quality Control (IQC), In-Process Quality Control (IPQC), and Final Quality Control (FQC) inspections.

Beauty Health Group Limited

Quality Control Inspector

Must possess: ability to read and understand engineering drawings and specifications, and perform mathematical computations; good communication skills to effectively interface with all levels of employees including management; ability to maintain the confidentiality of sensitive information; basic competence in use of computers; The ability to work independently or in a team environment is essential as is the ability to work extended hours, as required. Typically requires an associate''s degree, trade school certificate, military training or equivalent in quality inspections or certification by a professional group such as ASQ or AWS, and one or more years of progressive experience in electrical, mechanical, electromechanical or metrology inspection and calibration.

General Atomics

Quality Inspector II

The Lead Marine Gas Turbine Inspector (MGTI) is responsible for providing gas turbine (GT) inspection expertise, performing root cause analysis, and delivering inspector-perspective training on gas turbine operations and maintenance. Minimum of fifteen (15) years of supervisory-level watchstanding experience aboard warships or military auxiliary vessels with gas turbine main propulsion systems, including service as: Engineering Officer of the Watch (EOOW).

<p>Epsilon Systems, founded in 1998 and headquartered in San Diego, CA, has established a presence in more than 20 locations. Epsilon Systems customers include the Department of Defense, Department of Energy, Department of Homeland Security and non-profit and commercial customers. Epsilon Systems provides total life cycle support to defense systems, such as basic research, concept development, system architecture, requirements definition and analysis, software development, integration and test, operational support, training, and maintenance and logistics. </p>

Epsilon Systems Solutions Inc

Lead Marine Gas Turbine Inspector (MGTI)

Export Control Compliance To conform to U.S. government export control regulations, including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or otherwise eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce. The posted salary range reflects an estimate based on a variety of compensation factors, including but not limited to relevant experience, education, certifications, specialized skills, geographic location, and business needs.

Firestorm

Senior Quality Inspector

Approves finished material and/or product by confirming specifications, conducting visual measurement tests, returning products for re-work and confirming re-work. Inspects and approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting unacceptable materials through the designated ERP system.

Natel Engineering Co. Inc. (Inactive)

Quality Inspector I (25462)

Our 117,000 employees create intelligent buildings, efficient energy solutions, integrated infrastructure and next generation transportation systems that work seamlessly together to deliver on the promise of smart cities and communities. If you are an individual with a disability and you require an accommodation during the application process, please visit SpecialAccommodations@jci.com?subject=Candidate%20Accommodated%20Requested&body=Hello%2C%20%0A%0AI've%20applied%20to%20an%20opportunity%20and%20require%20an%20accommodation%20during%20the%20application%20process.

Fire Detection Inspector

This role serves as the company's subject matter expert for health-related construction hazards and supports project teams, regional safety staff, operations leadership, and trade partners in the anticipation, recognition, evaluation, and control of occupational health risks. The position works collaboratively with Regional Leadership Teams, Regional Safety Managers, and project teams to support business operations and provide industrial hygiene and occupational health expertise throughout all company regions.

BNBuilders Inc

Safety Manager - Health and Industrial Hygiene

Senior designs, manufactures and markets high-technology components and systems for the principal original equipment producers in the worldwide aerospace, defense, and land vehicle and power & energy markets. Senior's experienced manpower support, effective use of raw material, and high technology enable it to deliver optimized components within a short development time and at most competitive prices.

Senior Plc

Quality Assurance Inspector PM

Senior designs, manufactures and markets high-technology components and systems for the principal original equipment producers in the worldwide aerospace, defense, and land vehicle and power & energy markets. Senior’s experienced manpower support, effective use of raw material, and high technology enable it to deliver optimized components within a short development time and at most competitive prices.

Senior Aerospace Steico

Quality Assurance Inspector AM

SmartRecruiters_Organic_Non_Easy_Apply

Responsible for the verification of product characteristics and associated manufacturing documentation and other quality records, utilizing a range of inspection techniques and methods including, but not limited to visual, mechanicals, automated, contact and non-contact. With over 16,000 employees across 32 manufacturing sites in 12 countries we serve over 90% of the world's aircraft and engine manufacturers and achieved sales of £3.6bn in 2025.

GKN Aerospace Services Ltd

Inspector - 2nd Shift - Repair Solution

Responsible for the verification of product characteristics and associated manufacturing documentation and other quality records, utilizing a range of inspection techniques and methods including, but not limited to visual, mechanicals, automated, contact and non-contact. This job role requires proficiency in English, both verbal and written, that is sufficient to understand and effectively follow written safety procedures, company policies, work instructions, operations manuals, and more in a manufacturing environment.

Risk Manager Jobs in Alaska

Aerospace QC Inspector 1St Shift Chromalloy Gas Turbine

Quality Inspector Rock West Composites, Inc.

Inspection - QC Inspector 1st shift Chromalloy Gas Turbine LLC

Construction Site Safety Manager/Trainer (SSHO) RQ Construction

Welding / Mechanical Inspector SGS SA

Project Industrial Hygienist - CSST, CAC, CDPH, Mold Inspector A-Tech Consulting

Fire Sprinkler Inspector Johnson Controls

Quality Control Inspector Beauty Health Group Limited

Quality Inspector II General Atomics

Lead Marine Gas Turbine Inspector (MGTI) Epsilon Systems Solutions Inc

Senior Quality Inspector Firestorm

Quality Inspector I (25462) Natel Engineering Co. Inc. (Inactive)

Fire Detection Inspector Johnson Controls

Safety Manager - Health and Industrial Hygiene BNBuilders Inc

Quality Assurance Inspector PM Senior Plc

Quality Assurance Inspector AM Senior Aerospace Steico

Quality Assurance Inspector AM Senior Plc

Inspector - 2nd Shift - Repair Solution GKN Aerospace Services Ltd

Inspector GKN Aerospace Services Ltd

Inspector - 2Nd Shift - Repair Solution GKN Aerospace Services

Similar Job Searches

Stand out to leading employers.