UNKNOWN

FEED

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations). Inspectors are responsible for performing various methods on a large variety of engine cases to determine and verify conformance to work instructions and repair scope by marking areas of the part not meeting criteria.

RTX Corp

NDT Inspector - 3rd Shift

FULL_TIME

HOUR

The assessment and inspection of conditions include: Identifying exterior coating, sealant, and caulking problems; Conducting and recording results of various types of building diagnostic tests on floors and exterior walls and roofs; Gathering building condition data and measurements of building components and defects; Taking field notes and photographs, and summarizing the results electronically; Interfacing with onsite store managers and building restoration contractors and completing quality assurance reports; and. KTA’s Commercial Services Group provides building systems consulting and inspection services through a variety of offerings, including building envelope diagnostics with an emphasis on moisture intrusion, masonry, and paint problems, specifying repairs, and providing quality assurance services during remodel projects.

KTA-Tator, Inc., is a Consulting/Engineering firm founded in 1949 in Pittsburgh, Pennsylvania. Our main specialty is consulting and inspection in the protective coatings and construction industries.

Coatings, otherwise known as paint, are found in every aspect of our society today: on beverage cans, on automobiles, in houses and other buildings, on bridges, inside and outside of storage tanks, on pipes, on trains, and airplanes and much more.

KTA's specific expertise lies in our extensive knowledge of the many different kinds of paints/coatings which exist, their performance characteristics, what they're made of, and the best uses for each.

For 60 years, KTA has retained a staff of the coating industry's top professionals making it the largest and best trained professional staff of any independent coatings/corrosion consulting organization. The staff includes professional engineers, senior coatings and environmental consultants, certified protective coatings specialists, chemists, certified coatings inspectors, steel fabrication inspection services, certified industrial hygienists, and certified safety professionals. KTA currently has over 250 employees at its various locations. This diversification provides the breadth and depth of services to clients for all of their corrosion-related products and services.

KTA-Tator, Inc.

Commercial Building Inspector (Traveling)

partner JazzHR

Qualifications we prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations). As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Engine and Parts Inspector 2nd Shift (onsite)

Inspector - 2nd Shift (Onsite)

Be trained to inspect items after completion of shot peening, spot welding, chemical etching, photo etching, anodizing, alodining, plating, painting, aging, sand blasting and other processing operations and enter data into the Quality Automated Inspection Sampling (AIS) system, as requried. Experience with special finishes and related processes (e.g., heat treating, carburizing, rockhard, shot peening, anodizing, Alodining, copper plating, and tin-zinc plating.

Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that employs approximately 125,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.
	Our Mission:&nbsp; We solve complex challenges, advance scientific discovery and deliver innovative solutions to help our customers keep people safe and provide them essential services. 
	
	Our Vision:&nbsp;Be the global leader in supporting our customers to strengthen global security, deliver citizen services and advance scientific discovery.
	Our Values:
	
	<li style="margin: 0px 0px 0px 15px;">Do What's Right</li>
	<li style="margin: 0px 0px 0px 15px;">Respect Others</li>
	<li style="margin: 0px 0px 0px 15px;">Perform With Excellence</li>

Lockheed Martin Corp

Process Inspector C

Perform complex and critical inspection procedures requiring special setups, new or unique equipment, and the interpretation of test data from multiple sources. Segregate or place nonconforming products on hold and communicate inspection findings to Quality, Production, Engineering, and other appropriate departments.

HEICO Corporation is a successful and growing technology-driven aerospace, industrial, defense and electronics company. For more than 60 years, HEICO has thrived by providing customers with innovative and cost-saving products and services.

HEICO's products are found on large commercial aircraft, regional, business and military aircraft, as well as on a large variety of industrial turbines, targeting systems, missiles and electro-optical devices.

HEICO Corporation is a New York Stock Exchange listed company (NYSE: HEI and HEI.A) and has also been ranked as one of the 100 "World's Most Innovative Growth Companies", 100 "Best Small Companies" and 200 "Hot Shot Stocks" by Forbes over the past decade. With headquarters in Hollywood, Florida, and multiple locations around the world - HEICO provides over 1 million square feet of design, manufacturing, repair, overhaul, distribution, sales and support capabilities.

HEICO Corporation operates in two segments, the Flight Support group and the Electronic Technologies group. The Flight Support group designs, engineers, manufactures, repairs, distributes and overhauls FAA-approved parts that extend over the entire aircraft, from the engines all the way to hydraulic, pneumatic, electromechanical, avionic, structures, wheels and brakes and even interiors.

The Electronic Technologies group produces electrical and electro-optical systems and components serving niche segments of the aerospace, defense, communications, and computer industries. The Electronic Technologies group is a worldwide leader in the design, manufacture and sale of electrically and electro-optical engineered products used in the aerospace, defense, space, and electronics industries.

By combining state-of-the-art technologies, a team of highly skilled Team Members and an indisputable commitment to quality, both segments have constantly delivered invaluable solutions to customers over the years, helping to position them as leaders within their industries.

HEICO Corp

Production Inspector

To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report. While performing the duties of this job, the employee will usually work in a shop environment with exposure to loud noise, heat/fumes, airborne particles, hazardous chemicals, and moving mechanical parts with a risk of electrical shock.

Howmet Aerospace Inc

Inspector Trainee 2nd Shift

Company Overview: The Lee Company is a global leader in the design and production of miniature, precision fluid control components for the aerospace, medical/scientific instrument, oil tool, and automotive industries. Lee’s unique capabilities in miniaturization and engineering keep the company at the forefront of fluid control technology and identify Lee as a leading innovator in the field of fluid handling and control.

The Lee Company

Micro Hydraulic Inspector - 1st and 2nd shift

100hires

Individual pay is determined through interviews and an assessment of several factors that that are unique to each candidate, including but not limited to job-related skills, relevant education and experience, certifications, abilities of the candidate and pay relative to other team members. Maintain continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs to supervisors and co-workers on all shifts.

ASML

Optical Surface & Mechanical Inspector CWWBack End Nights, 6:00 PM – 6:00 AM (Wednesday, Thursday, Friday, and every other Saturday)

sourcestack_via_bold

Effective communicator; possess strong verbal and written communication skills – must be able to directly interface with Engineering, Manufacturing Engineering and suppliers in CMM related issues as they may arise. Possess the ability to both evaluate and recommend CMM hardware and software improvements, to improve performance and/or utilization, in a cost-effective approach.

Applied Aerospace & Defense

CMM Operator / Inspector

PART_TIME

Perform quality inspection using calipers, micrometers, plug gages, thread gages, pin gages, and other appropriate inspection tools. Review certifications and supporting documentation to ensure compliance with engineering drawings and customer specifications, including: Material certifications.

Roller Bearing Company of America, Inc

Inspector

Visually checks all wire and cable during rewinding operations to detect rough finish areas, obvious diameter variations and other disqualifying elements. Performs minor cable repairs, trim braid, repair jackets and perform other routine repair operations as necessary.

Times Microwave Systems

3rd Shift Rewind Inspector

AcquireTM

ADAPTED_NOW

Position Overview: We are seeking a detail-oriented X-Ray Technician to support quality and manufacturing operations by performing X-ray and visual inspections on electronic assemblies. Minimum 2+ years of experience in electronics manufacturing inspection or X-ray inspection of circuit card assemblies.

Companies need talent. You want job opportunities.
That’s where we come in. We create meaningful connections between companies and candidates, and we’ve been doing it for over 65 years. Our national workforce solutions include contract, contract-to-hire, direct placement services, and managed services for a variety of industries.
We employ specialized recruiters focused in Engineering, Information Technology, Accounting & Finance, Administrative & Customer Service, and Manufacturing & Distribution.
When you need to find a job, we're your partner.

Nesco Resource, LLC

nescoftpin

NDT Inspector - 3rd Shift (Onsite)

As a Resident Engineer/Chief Inspector you will provide oversight services for a variety of infrastructure projects in scope and size from road reconstruction projects to complex bridge replacement projects across Connecticut. We deliver environmental and sustainability services to our clients through the integration of over 30 advisory, technical environmental, and engineering disciplines to help clients address some of their most complex challenges around sustainability.

SLR Consulting

Chief Inspector

Individual pay is determined through interviews and an assessment of several factors that that are unique to each candidate, including but not limited to job-related skills, relevant education and experience, certifications, abilities of the candidate and pay relative to other team members. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process.

ASML Holding NV

Optical Surface & Mechanical Inspector CWWBack End Nights, 6:00 PM - 6:00 AM (Wednesday, Thursday, Friday, and every other Saturday)

Performance of visual inspection to ensure cosmetic acceptance prior to parts going to outside processing or internal finishing. Performance of mechanical inspection of manufactured and purchased machined parts using hand-held measuring devices.

Valley Tool and Manufacturing

In Process Inspector

In this role, you will be responsible for ensuring the precision and accuracy of manufactured parts using Coordinate Measuring Machines (CMM). If you are a quality-driven professional with a passion for precision and a proven track record in CMM inspection, we invite you to apply.

Manufacturing

CMM Inspector

ea_via_bold

We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.

About AECOM
AECOM is a global network of experts working with clients, communities and colleagues to develop and implement innovative solutions to the world&rsquo;s most complex challenges.
Delivering clean water and energy. Building iconic skyscrapers. Planning new cities. Restoring damaged environments. Connecting people and economies with roads, bridges, tunnels and transit systems. Designing parks where children play. Helping governments maintain stability and security.
We connect expertise across services, markets, and geographies to deliver transformative outcomes. Worldwide, we design, build, finance, operate and manage projects and programs that unlock opportunities, protect our environment and improve people&rsquo;s lives.
Imagine it. Delivered.
&lt;iframe width="731" height="411" src="<a href="https://www.youtube.com/embed/r59sdFbjyck">https://www.youtube.com/embed/r59sdFbjyck</a>" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen&gt;&lt;/iframe&gt;
<div class="fast-facts">
<h2>Fast Facts:</h2>
<table style="width: 100%;" width="672">
<tbody>
<tr>
<td>
<ul>
<li>
Approximately $20.2 billion of revenue during fiscal year 2018
</li>
<li>
Ranked #1 in Transportation and General Building in Engineering News-Record&rsquo;s 2018 &ldquo;Top 500 Design Firms&rdquo;
</li>
<li>Named one of Fortune magazine's "World's Most Admired Companies" for the fifth consecutive year <img class="wp-image-38775 alignleft" src="https://www.aecom.com/content/wp-content/uploads/2018/02/WMAC2018.jpg" alt="WMAC2018" width="97" height="90" /> 
 
&copy;2018 Time Inc. Used under license.
</li>
</ul>
</td>
</tr>
</tbody>
</table>
</div>

Quality Inspector Jobs in Connecticut

NDT Inspector - 3rd Shift RTX Corp

Commercial Building Inspector (Traveling) KTA-Tator, Inc.

Engine and Parts Inspector 2nd Shift (onsite) RTX Corp

Inspector - 2nd Shift (Onsite) RTX Corp

Process Inspector C Lockheed Martin Corp

Production Inspector HEICO Corp

Inspector Trainee 2nd Shift Howmet Aerospace Inc

Micro Hydraulic Inspector - 1st and 2nd shift The Lee Company

Optical Surface & Mechanical Inspector CWWBack End Nights, 6:00 PM – 6:00 AM (Wednesday, Thursday, Friday, and every other Saturday) ASML

CMM Operator / Inspector Applied Aerospace & Defense

Inspector Roller Bearing Company of America, Inc

3rd Shift Rewind Inspector Times Microwave Systems

Inspector Nesco Resource, LLC

NDT Inspector - 3rd Shift (Onsite) RTX Corp

Chief Inspector SLR Consulting

Optical Surface & Mechanical Inspector CWWBack End Nights, 6:00 PM - 6:00 AM (Wednesday, Thursday, Friday, and every other Saturday) ASML Holding NV

In Process Inspector Valley Tool and Manufacturing

CMM Inspector Manufacturing

Chief Inspector - Highway & Bridge Construction $10,000 Sign on Bonus AECOM

NDT Inspector - 3rd Shift RTX

Similar Job Searches

Stand out to leading employers.