Quality Engineer Dauch CorpQuality EngineerDetroit, MIFormed through the acquisition of Dowlais Group plc and its subsidiaries - GKN Automotive and GKN Powder Metallurgy, Dauch unites deep engineering roots with global manufacturing capabilities and an entrepreneurial spirit to move mobility forward. About Dauch: Dauch Corporation is a premier Driveline and Metal Forming supplier serving the global automotive industry with a powertrain-agnostic product portfolio that supports electric, hybrid, and internal combustion vehicles.
Quality Engineer AptivQuality EngineerTroy, MIDevelop, implement and maintain warranty analysis processes with all customers, striving for issues resolutions, interfacing with Engineering and Manufacturing teams on investigation of root causes and implementation of corrective actions. Monitor and report customer quality and warranty performance metrics (e.g., PPM, customer scorecards, IPTV) and drive continuous improvement initiatives to meet and exceed customer expectations.
FRT & RR Suspension Engineer Hyundai America Technical Center, Inc.FRT & RR Suspension EngineerSuperior Charter Township, MIValidation Planning and Testing: Define, support, and execute validation plans for suspension systems by aiding in test plan creation efforts, supporting prototype builds, and conducting bench and full-vehicle tests (e.g., durability, NVH, ride comfort, handling, off-road performance, etc.). The Position: The FRT (front) & RR (rear) Suspension Engineer would lead design, development, and validation-related efforts concerning front and rear systems for U.S. SUV, pickup truck, and off-road vehicles to create a robust, high-performance suspension architecture.
Sr. Design Engineer, Structural/Mechanical GSE Blue OriginSr. Design Engineer, Structural/Mechanical GSESouthgate, Washington$145,188–$203,263.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. The hardware presents real structural challenges: non-obvious load paths, tight integration interfaces, code-driven sizing (ASME B30.20/BTH-1, AISC-360, ASCE-7, Aluminum Design Manual), welded steel and aluminum structures, and energized subsystems where structural integrity is safety-critical.
NewJr. ADAS Warranty Engineer ALTEN TechnologyJr. ADAS Warranty EngineerAuburn Hills, MichiganThis role serves as a key technical interface between Engineering, Quality, Manufacturing, Service, Customer Experience, Suppliers, and Warranty organizations to rapidly identify emerging issues, determine root causes, and implement effective corrective actions that improve vehicle quality and customer satisfaction. This position is well suited for candidates with a background in Computer Systems Engineering, Computer Science, Software Engineering, Computer Engineering, Information Technologies, Electrical Engineering, Mechatronics, or related disciplines who are passionate about quality improvement, data analysis, problem solving, and advanced automotive technologies.
Principal Innovation Engineer Huntington Bancshares IncPrincipal Innovation EngineerDetroit, MIThe Principal Innovation Engineer will partner closely with the team to productize innovative concepts into secure, scalable applications and services, reducing dependency on single-threaded architecture knowledge by bringing strong engineering leadership, integration capability, and delivery velocity. This role requires strong hands-on full-stack engineering skills, the mindset of a startup innovator in a large organization, experience building AI-integrated applications end-to-end, developing APIs and user experiences, and the ability to operate independently with limited supervision in a fast-paced innovation environment.
Hardware Design Release Engineer ALTEN TechnologyHardware Design Release EngineerAuburn Hills, MichiganWe’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.
Program Engineer (Japanese OEM Accounts) Axalta Coating SystemsProgram Engineer (Japanese OEM Accounts)Detroit, MichiganThe ideal candidate will have at least six (6) years of automotive, chemical, or related industry experience to include a combination of sales, technical and marketing experience displaying finance and business acumen. We engineer technologies that protect customers' products - whether they are battling heat, light, corrosion, abrasion, moisture, or chemicals - and add dimension and beauty with colourful finishes.
Quality Program Engineer OPmobility SEQuality Program EngineerTroy, MIToday, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions. We are committed to building inclusive teams, promoting diversity and equality, and ensuring that every application is considered fairly - because the future of mobility is built by diverse perspectives, bold ideas, and people who dare to move forward.
Director of Quality and Compliance CrossFire GroupDirector of Quality and ComplianceWarren, MIImplement and strengthen APQP, PFMEA, control plans, process flow diagrams, PPAP or equivalent aerospace production-readiness processes, SPC, process capability, MSA, and gage R&R. Lead root-cause and corrective-action activities using disciplined methodologies such as 8D, 5 Why, fishbone analysis, fault-tree analysis, containment, corrective action, and effectiveness verification.
Design Release Engineer – Non-Rotating Components Kratos DefenseDesign Release Engineer – Non-Rotating ComponentsAuburn Hills, MIThe position works closely with Design Engineering, Product Engineering, Systems Engineering, Performance Engineering, Manufacturing Engineering, Test Engineering, and Quality to ensure structural components support engine performance, system integration, and production reliability. Keyword: structural design, CAD modeling, GD&T, load analysis, thermal/vibration analysis, configuration control, manufacturability, FEA collaboration, system interfaces, test validation, root cause analysis.
Aerodynamics Engineer Williams InternationalAerodynamics EngineerPontiac, MIResponsibilities include delivering aerodynamic designs and analyses of various turbomachinery flow path components, working with our expert in-house manufacturing team to ensure a producible design, and supporting engine and subsystem testing to provide design validation. Proficient in computational fluid dynamics and associated geometry generation and meshing tools, for example, methods similar to the following commercially available software modules: Fluent, CFX, Fine/Turbo, AXCENT, Pointwise.
Director Of Quality JB PoindexterDirector Of QualityPontiac, MIThe Director provides leadership across manufacturing, assembly, installation, inspection, supplier quality, customer response, warranty-related quality improvement, and process capability assessments while driving a culture of quality, prevention, accountability, and continuous improvement. This is a highly hands-on role that requires direct involvement on the shop floor, in the weeds with production teams, suppliers, process issues, customer concerns, and day-to-day quality performance.
NewPlant Modelling & Simulation Engineer – ADV ALTEN Technology USAPlant Modelling & Simulation Engineer – ADVAuburn Hills, MIThe engineer will work closely with cross-functional teams including system design, architecture, controls, and testing organizations to enable efficient virtual development and validation using model-based techniques. We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles.
Embedded Software Engineer - Vehicle Fire Control Systems The Panther GroupEmbedded Software Engineer - Vehicle Fire Control SystemsSterling Heights, MIResponsibilities to Anticipate for this role: Design, configure, and test a new software development environment that will be used to create software work products ranging from documentation to code and test artifacts. Develop software documentation and code across one or more vehicle domains including board support, displays, power management, lethality, software deployment, embedded training, diagnostics.
Aerospace Energetics Engineer Williams InternationalAerospace Energetics EngineerPontiac, MIWilliams International is a Drug Free Workplace where all new team members and contractors are subject to pre-employment drug testing for the following controlled substances: marijuana, cocaine, PCP, amphetamines, opioids and alcohol as policy dictates. Bachelor's Degree or higher in a relevant science/engineering or systems/project management discipline (e.g., Chemistry, Mechanical Engineering, Aerospace Engineering, Chemical Engineering, Project Management).
Functional Safety Engineer GENTEX CorpFunctional Safety EngineerAuburn Hills, MIDeliver verified Functional Safety concepts and design specifications, which is accomplished by: Finding and applying the best method for any PS&S design engineering activity. Bachelor's degree in Cybersecurity, Software Engineering, Electrical Engineering, Computer Science, or related field.
NewSoftware Development Engineer CrossFire GroupSoftware Development EngineerAuburn Hills, MIThe ideal candidate will have a strong technical background in software engineering, experience working within regulated environments, and the ability to drive continuous improvement in software development processes. Essential Duties and Responsibilities Collaborate with cross-functional teams and third-party development partners to establish and improve software development plans, processes, and coding best practices.
Closures BIW Engineer Hyundai America Technical Center, Inc.Closures BIW EngineerSuperior Charter Township, MIThis position plays a critical role in the end-to-end engineering of functional, innovative, and aesthetically integrated closures, including hoods, tailgates, side doors, liftgates, hinges, and special Closure moving panels. Additionally, the Closures Engineering Design Team fosters a culture where senior engineers guide less experienced colleagues, share knowledge freely, and work together to solve complex engineering challenges.
NewSenior Principal Engineer – Engineering Excellence & Problem Solving Kratos DefenseSenior Principal Engineer – Engineering Excellence & Problem SolvingAuburn Hills, MIThe Senior Principal Engineer applies Design for Six Sigma, Lean Six Sigma, reliability engineering, statistical analysis, and advanced root-cause methods to resolve complex technical issues involving turbine-engine performance, design variation, manufacturing processes, supplier components, materials, dimensional conditions, measurement systems, assembly, and testing. The Senior Principal Engineer Engineering Excellence & Problem Solving serves as a senior individual-contributor and technical subject-matter expert responsible for leading complex engineering investigations, improving product and process robustness, and strengthening TDIs structured problem-solving capabilities.
NewLead Automotive Embedded Software Engineer ALTEN Technology USALead Automotive Embedded Software EngineerDetroit, MIWe're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. This position is focused on the design, development, integration, testing, and release of embedded software supporting automotive seating, comfort, actuator, motor, and interior system applications.
Design Release Engineer (DRE) – Exterior Mirror ALTEN Technology USADesign Release Engineer (DRE) – Exterior MirrorAuburn Hills, MIResponsibilities include overseeing component design, FMEA, analysis (CAE), vehicle packaging (NX), model/drawing integrity (Teamcenter), development, component validation (DVP&R, change management (CCD/WebCN), engineering bill of material (EBOM), build support, issue management (GIMS), joint design, root cause analysis, solution development, and in-person support for associated testing, issue root cause, plant support, etc. We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles.
Design Release Engineer (DRE) – Exterior Mirror ALTEN TechnologyDesign Release Engineer (DRE) – Exterior MirrorAuburn Hills, MichiganResponsibilities include overseeing component design, FMEA, analysis (CAE), vehicle packaging (NX), model/drawing integrity (Teamcenter), development, component validation (DVP&R, change management (CCD/WebCN), engineering bill of material (EBOM), build support, issue management (GIMS), joint design, root cause analysis, solution development, and in-person support for associated testing, issue root cause, plant support, etc. We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles.
Safety and Crashworthiness Performance Engineer Hyundai America Technical Center, Inc.Safety and Crashworthiness Performance EngineerSuperior Charter Township, MIProfessional experience in planning, coordinating, and executing full vehicle and component-level crash tests (i.e., frontal, side, rear, rollover, static, and subsystem tests). What You Will Do: Plan, coordinate, and execute full vehicle and component-level crash tests (i.e., frontal, side, rear, rollover, static, and subsystem tests).
Mechanical Engineer III Blue OriginMechanical Engineer IIISouthgate, Washingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Materials Engineer Hyundai America Technical Center, Inc.Materials EngineerSuperior Charter Township, MIPerform root cause analysis on field claim quality-related issues, in addition to collaborating with assembly plants, engineering design teams, and suppliers to implement engineering improvements and countermeasures. What You Will Bring to the Role: Bachelor's degree in chemical engineering, chemistry, material science, plastics engineering technology, polymer science/engineering, rubber engineering technology, or a related field.
Adhesives Engineer Hyundai America Technical Center, Inc.Adhesives EngineerSuperior Charter Township, MIConsult with plant manufacturing locations and associated suppliers to support North and South American manufacturing locations in resolving quality-related issues concerning adhesives, sealers, waxes, etc. What You Will Bring to the Role: Bachelor's degree in adhesives, chemical engineering, chemistry, material science, polymers and coatings technology, polymer science/engineering, or a related field.
Senior Industrial Engineer Yanfeng International Automotive Technology Co LtdSenior Industrial EngineerNovi, MIThe Senior Industrial Engineer partners with Operations, Supply Chain, Manufacturing Engineering, Program Management, and Continuous Improvement teams to optimize labor utilization, facility layouts, capacity planning, and operational performance while supporting the successful launch of new business and advanced manufacturing technologies. This position is responsible for leading complex operational improvement initiatives, developing long-term manufacturing strategies, and driving sustainable productivity improvements across plant operations.
NewManufacturing Engineer Kratos DefenseManufacturing EngineerAuburn Hills, MIThe position works cross-functionally with Operations, Engineering, Quality, Supply Chain, Configuration Management, Program Management, Test, and suppliers to ensure manufacturing processes are safe, repeatable, capable, properly documented, and aligned with customer, engineering, quality, cost, and delivery requirements. The Manufacturing / Process Engineer is expected to work primarily where the work is performed, rapidly contain production issues, determine root cause, implement sustainable corrective actions, and verify that improvements are effective.
Design Release Engineer(Soft Trim/Interior) ALTEN TechnologyDesign Release Engineer(Soft Trim/Interior)Auburn Hills, MichiganOwn and manage the design, development, integration, and release of automotive Soft Trim Interior components, including Soft Trim, Cargo, Carpet, Frunk, and related interior trim components, from concept through production launch. Support vehicle plant launch activities, including troubleshooting and root-cause analysis of assembly issues, build variation, BSR (Buzz, Squeak & Rattle), fit and finish, dimensional variation, and other launch-gating concerns.
Design Engineer Yanfeng International Automotive Technology Co LtdDesign EngineerNovi, MIThe CAD Designer / Engineer's key responsibilities include: Creating new CAD models of future products; Analyzing and modifying CAD models that YFSS receives from customers, suppliers, or other internal sources; Creating and modifying DWG files in the proper YFSS- and customer templates, including creating and applying the proper GD&T for the parts and assemblies; Managing CAD data releases in YF PLM; Communicating with internal YFITC and customer interfaces/ departments to transfer data. Understand the proper engineering design of plastic, cast Aluminum/ Magnesium, and stamped steel parts to avoid defects such as flow lines, sink marks, stress risers, etc.
Team Lead Engineer - Arista VeloCloud SD-WAN (Onsite - Auburn Hills, MI) Dr. Ing. h.c. F. Porsche AGTeam Lead Engineer - Arista VeloCloud SD-WAN (Onsite - Auburn Hills, MI)Auburn Hills, MIThe position will coordinate circuit installations with carriers, partner with carrier project managers, guide technical design through VWGoA architecture and PMO governance, complete configurations and testing, and lead migration from the existing MPLS network to the new SD-WAN architecture. The Team Lead Engineer - Arista VeloCloud SD-WAN will lead the engineering team responsible for designing, implementing, deploying, migrating, and maintaining Volkswagen Group of America's Arista VeloCloud SD-WAN environment.
ADAS Software Development & Test Engineer MOBIS NORTH AMERICA, LLCADAS Software Development & Test EngineerPlymouth, MIHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Mobis North America legal duty to furnish information. Mobis delivers the design and development of advanced engineering, autonomous driving, infotainment, component modules, safety, brake and steering systems, lamp, ICS/electronics and software development solutions that consider the safety and convenience of our customers as well as the future.
Senior Telematics Engineer MOBIS NORTH AMERICA, LLCSenior Telematics EngineerPlymouth, MIHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Mobis North America legal duty to furnish information. Mobis delivers the design and development of advanced engineering, autonomous driving, infotainment, component modules, safety, brake and steering systems, lamp, ICS/electronics and software development solutions that consider the safety and convenience of our customers as well as the future.
Validation Engineer Yanfeng International Automotive Technology Co LtdValidation EngineerNovi, MIIn North America, Yanfeng is focused on enhancing the mobility experience through the design, development, and manufacturing of automotive interiors, seating, electronics, and passive safety systems. Program coordination of test plans, including samples, fixtures, schedules, sign-offs, witnessing tests, and sample reviews.
Electrical Engineer OHMElectrical EngineerLivonia, MichiganWith the singular mission of Advancing Communities , our diverse 800+ team of professionals works collaboratively across multiple service areas in multiple states including, architecture, engineering, planning, surveying and construction engineering. As a licensed Electrical Engineer, you will collaborate with project teams, clients, and contractors to manage and execute commercial facility designs, including lighting, power distribution, fire alarms, and IT systems.
Substation Engineer 2 (Remote) SOLV Energy LLCSubstation Engineer 2 (Remote)MIRemote$89,527–$111,909 / yearIn addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting. Collaborate with cross-functional teams, including transmission planners, protection engineering, control systems specialists, PV engineering, and BESS engineering to ensure the seamless integration of substations into the overall power grid.
NewProject Civil Engineer / Project Manager Langan Engineering & Environmental ServicesProject Civil Engineer / Project ManagerDetroit, Michiganfrom concept through completion; Demonstrated ability effectively managing projects from concept through construction documents; Self-starter with the ability to manage, motivate, mentor and lead others; Ability to work well on multi-disciplinary projects; Expertise in stormwater management design, hydrologic/hydraulic analysis and design, and SWPPP preparation; Experienced in technical and proposal writing; Excellent verbal and written communication skills; Proficiency of AutoCAD or Civil 3D (preferred); Ability to interact well with coworkers, clients, and regulatory agencies; Participation in professional organizations; Strong attention to detail with excellent analytical and judgment capabilities; Ability to effectively work independently and in a team environment; and. Bachelor’s degree in Civil Engineering; Valid Professional Engineer license; 6+ years of related site/civil land development experience; Knowledge of local city, county and state land use processes and regulations; Strong client development, client communication, client management abilities, and ability to develop new work; Site/civil experience on a variety of project sites including the ability to design site layout, grading, drainage, infrastructure, erosion and sediment control, etc.
Software Reliability Engineer - Warehouse Management Systems Lineage IncSoftware Reliability Engineer - Warehouse Management SystemsNovi, MIRemoteThis role focuses on investigating, diagnosing, and resolving operational software issues that impact warehouse performance-freeing developers to focus on new features and ensuring WMS never disrupts day-to-day operations. The Software Reliability Engineer (SRE) will play a critical role in ensuring that our Warehouse Management Software (WMS) runs seamlessly across both automated and manual facilities.
Engineer - Licensed Professional- 067250 Wayne County (MI)Engineer - Licensed Professional- 067250Detroit, MITasks include technical review of shop drawings; independent assessment of the recommended improvements and inspection of the quality and progress of construction; assistance in the coordination of treatment operations and construction efforts; and participation in the testing, start-up and training aspects of construction projects. Under the general direction of the Senior Licensed Engineer, the Licensed Professional Engineer is responsible for aiding in the management and administration of local, state and federal programs and activities related to county drains and other engineering matters as assigned.
Construction Engineer I (Temp-to-Hire) SOLV Energy LLCConstruction Engineer I (Temp-to-Hire)MIRemote$29.78–$37.23 / hourThis role contributes to (1) Warranty Analysis, by gathering data and supporting engineering review of potential design or installation issues; (2) Emerging Technologies Implementation, by assisting with GPS-enabled pile driving, drone-based survey workflows, and new construction tools; (3) Construction Engineering Support During Operations, by coordinating RFIs, design updates, and field engineering clarifications; and (4) Pile Load Testing Support During Initial Design, by assisting with planning, scheduling, documentation, and engineering communication for pre-construction pile testing programs. In addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting.
Product Engineer Electrical/Electronics Optimal StaffingProduct Engineer Electrical/ElectronicsAllen Park, MIResponsible for validation planning, cross-functional coordination, supplier collaboration, testing, quality support, and execution through vehicle launch in accordance with Ford GPDS and program milestones. Lead Design Verification Planning (DVP) and Product Validation (PV) activities for automotive electrical systems, with a primary focus on high-voltage wiring harnesses.
Entry-Level Engineer The Whiting-Turner Contracting CoEntry-Level EngineerDetroit, MIReporting to a project manager and/or a superintendent, the entry-level engineer''s major duties include: Coordinating work with project owner representatives, architects, engineers, inspectors, and site subcontractors and/or directing the work of all trades assigned to a construction work site. Basic qualifications for Entry-Level Engineer candidates include: Bachelor of Science in an Engineering discipline, Engineering Technology or Construction Management, Construction Technology.
Principal Application Engineer - Warehouse Automation Hitachi LtdPrincipal Application Engineer - Warehouse AutomationMIRemoteHow Youll Make an Impact A Principal Applications Engineer - Warehouse Automation market will partner with our account managers to develop new customer win strategies and winning technical solutions which meet our customer requirements within the Warehouse Automation vertical. Develop strategic direction and develop win strategies with a team of Engineers to be successful in obtaining future work from new customers within the Warehouse Automation market.
System Engineer Optimal StaffingSystem EngineerDearborn, MIThis includes using Gherkin to model behavioral scenarios of cloud-to-vehicle modem communications, designing dynamic data-triggering strategies (e.g., only uploading detailed vibration spectra when an anomaly threshold is crossed), and optimizing payload serialization to minimize data transmission costs. Practical application of Robust Engineering principles, specifically creating Parameter Diagrams (P-Diagrams) to identify system inputs, desired outputs, error states, control factors (design parameters), and noise factors (environmental, wear, manufacturing tolerances).
Paint Finishing Mechanical Engineer Thornley Corporate SolutionsPaint Finishing Mechanical EngineerRochester Hills, MichiganPaint Finishing Experience: Demonstrated experience as a lead engineer in designing paint finishing systems, specifically in spraybooths, ovens, abatement systems, and phos/ecoat systems. Excellent Communication Skills: Effective verbal and written communication skills to coordinate with project teams, subcontractors, and clients.
Avionics Electrical Engineer III Blue OriginAvionics Electrical Engineer IIISouthgate, Washingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Engineer - Licensed Professional- 067131 Wayne County (MI)Engineer - Licensed Professional- 067131Detroit, MIUnder the general direction of the Senior Licensed Engineer, the Licensed Professional Engineer is responsible for aiding in the management and administration of local, state and federal programs and activities related to wastewater control systems, and other engineering matters as assigned. Assist with the project planning, designing, and construction of capital improvements for wastewater and stormwater facilities owned and/or operated by the County by evaluating needs and providing technical assistance for the identification and analysis of improvement alternatives and the selection of a final course of action.
Engineer - Senior Licensed Professional- 067130 Wayne County (MI)Engineer - Senior Licensed Professional- 067130Detroit, MITasks include technical review of shop drawings; independent assessment of the recommended improvements and inspection of the quality and progress of construction; assistance in the coordination of treatment operations and construction efforts; and participation in the testing, start-up and training aspects of construction projects. Leads the ESD asset management program, including establishing and maintaining an accurate equipment and inventory database that provides detail on equipment conditions and performs ranking functions to update improvement needs of facilities under the County''s jurisdiction.
Lead Power Systems Engineer Williams InternationalLead Power Systems EngineerPontiac, MIWilliams International is a Drug Free Workplace where all new team members and contractors are subject to pre-employment drug testing for the following controlled substances: marijuana, cocaine, PCP, amphetamines, opioids and alcohol as policy dictates. The lead power systems engineer will work closely with design and infrastructure teams using expert insight to define system requirements and develop innovative solutions for integrated microgrid systems.