UNKNOWN

FEED

The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for food and beverage production facilities. We are seeking experienced Electrical Engineers with strong technical capabilities to support and advance our building electrical engineering practice.

The Dennis Group Inc

Electrical Engineer III (Power Systems)

linkup_via_bold

Three (3) years of hands-on, building related maintenance and repair experience in one of the following areas: pipefitting, HVACR, steam-operated systems used for humidification and sterilization, pneumatic and electronic building control systems (BAC), plumbing systems, commercial or industrial laundry equipment, sterilizing equipment, gas or diesel engines and generators, kitchen and cafeteria equipment, mechanical and electrical systems, carpentry, troubleshooting, or welding and fabrication. At least one (1) of the accepted certifications or licensures that fall under any of the following categories: Professional trade license (plumbing, electrical, etc.), Professional trade certifications (HVAC, contractor, MedGas, OSHA, building operator, firestopping, emergency power, ASHE Certified Health Care Physical Environment Worker, etc.), or another potentially applicable certification or license, as pre-approved by F&E leadership.

The state’s oldest and largest institution of higher education, the University of Utah is the flagship university of the state. The University offers more than 100 undergraduate and 90 graduate degree programs to more than 31,000 students (23,500 undergraduate and 7,500 graduate). The University is noted for its high research profile, its diversity of ideas and people, its stunningly beautiful setting and the warmth, friendliness, and collegiality of its faculty staff, and students. Imagine yourself working in a collaborative, creative, respectful environment where everyone’s contribution is needed and appreciated – University of Utah!

University of Utah

Facilities Maintenance Engineer II

YEAR

As the first dedicated engineering hire on the analytics team, you will build out the broader analytics platform once the pricing engine is in steady hands: Integrate machine-learning models built by our data science and marketing analytics teams into production, writing the feature and scoring logic that puts a model's output to work in the pricing flow and other decisions, and partnering with Data Science on iteration. Once you have the engine running reliably, the role grows into integrating our machine-learning models into production, building the internal analytics applications and data products other teams rely on, and owning the data plumbing and quality checks those applications depend on.

One Park Financial

Lead Engineer, Pricing & Decision Systems

Workable

FULL_TIME

The position will support our engineering design practice by applying electrical engineering skills and providing services to our expanding process engineering and water and wastewater treatment practices for various industrial and municipal sectors. Skills, Experience and Qualifications: At least 7 years of experience in electrical engineering with a focus on Electrical and Control Engineering field with a focus on the design phase for process engineering projects; or equivalent combination of education and experience.

Geosyntec Consultants, Inc.

Project Professional Electrical Engineer

[AW]-iCims

ADAPTED_NOW

Prepare and revise electrical engineering deliverables, including single-line diagrams, motor control schematics, MCC layouts, cable and conduit schedules, grounding and lighting plans, hazardous area drawings, wiring diagrams, loop drawings, and installation details. For over 25 years, we have connected thousands of consultants with meaningful roles through a personal, communication-driven approach, partnering with a diverse client base to build high-performing teams and create lasting impact.

ConsultNet

Electrical Engineer

We are seeking talented individuals to aid in the design and implementation of mechanical systems as part of a broad engineering and architectural team in designing and building food and beverage production facilities, specifically HVAC, plumbing / utility, and fire suppression systems. Performing construction administration in the form of submittal reviews, RFI responses, and field visits to verify construction scope is proceeding per the intent of the design.

External Dennis Group Jobs

Mechanical Engineer Entry Level (Start Summer 2027)

sourcestack_via_bold

Our mechanical team is involved with designing the mechanical systems, calculating space heat and cooling loads, determining and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. Dennis Group’s Mechanical Engineers design and implement mechanical systems as part of a broad engineering and architectural team in designing and building food and beverage production facilities.

Mechanical Engineer, Mid-Level (HVAC & Utilities)

In this role, you'll work with modern networking technologies including Cisco Nexus, Spine Leaf architectures, VXLAN/EVPN, BGP, OSPF, SD WAN, and Cisco Meraki while helping advance network automation and cloud connectivity. Our client is seeking an experienced Network Engineer to help design, modernize, and support secure, resilient, and highly available enterprise network infrastructure across data centers, branch locations, and cloud environments.

Smith Johnson Tech

16237 - Network Engineer

Six (6) years of hands-on, building related maintenance and repair experience in one (1) or more of the following areas: pipefitting, HVACR, steam-operated systems used for humidification and sterilization, pneumatic and electronic building control systems (BAC), plumbing systems, commercial or industrial laundry equipment, sterilizing equipment, gas or diesel engines and generators, kitchen and cafeteria equipment, mechanical and electrical systems, carpentry, troubleshooting, or welding and fabrication. At least three (3) of the accepted certifications or licensures that fall under any of the following categories: Professional trade license (plumbing, electrical, etc.), Professional trade certifications (HVAC, contractor, MedGas, OSHA, building operator, firestopping, emergency power, ASHE Certified Health Care Physical Environment Worker, etc.), or another potentially applicable certification or license, as pre-approved by FM leadership.

Maintenance Engineer III

Three (3) years of hands-on, building related maintenance and repair experience in one (1) or more of the following areas: pipefitting, HVACR, steam-operated systems used for humidification and sterilization, pneumatic and electronic building control systems (BAC), plumbing systems, commercial or industrial laundry equipment, sterilizing equipment, gas or diesel engines and generators, kitchen and cafeteria equipment, mechanical and electrical systems, carpentry, troubleshooting, or welding and fabrication. At least one (1) of the accepted certifications or licensures that fall under any of the following categories: Professional trade license (plumbing, electrical, etc.), Professional trade certifications (HVAC, contractor, MedGas, OSHA, building operator, firestopping, emergency power, ASHE Certified Health Care Physical Environment Worker, etc.), or another potentially applicable certification or license, as pre-approved by F&E leadership.

Maintenance Engineer II

Take the lead in documenting all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc. 8-11 years of work experience in designing lighting, fire alarm systems, and low voltage systems for building spaces, including lighting calculations, and coordinating fixture placement with trades.

Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. Documenting all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc.

Electrical Engineer II (Power Systems)

Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. Document all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc.

Electrical Engineer Intern

Electrical Engineer Intern/Co-Op (Building power systems)

Participate in design reviews, addressing electrical and other concerns and collaborating with the Cementation Operations group to ensure that facilities will be built in the safest, most efficient, and cost-effective manner possible. Collaborate with Cementation's Project Services and Operations groups to produce "Best for Project" designs that are safe, reflect the client's operability requirements, and are constructible.

Cementation USA

Talent Acquisition

Senior Electrical Engineer

The ideal candidate will have experience managing multiple projects simultaneously and leading engineering efforts from concept through execution, including equipment selection, system design, vendor coordination, and commissioning support. For over 25 years, we have connected thousands of consultants with meaningful roles through a personal, communication-driven approach, partnering with a diverse client base to build high-performing teams and create lasting impact.

Mechanical Engineer

Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more. This is the eighth time this hospital has been recognized with this honor as one of the top performing Teaching Hospitals in the U.S. St. Mark's has expanded emergency access to the communities we serve with two free standing emergency centers, Taylorsville Emergency Center and West Valley Emergency Center .

At its founding in 1968, Nashville-based HCA was one of the nation's first hospital companies. Today, we are the nation's leading provider of healthcare services, a company comprised of locally managed facilities that includes about 165 hospitals and 115 freestanding surgery centers in 20 states and England and employing approximately 204,000 people. Approximately four to five percent of all inpatient care delivered in the country today is provided by HCA facilities. Richard M. Bracken serves as Chairman of HCA and R. Milton Johnson is the company's President and Chief Executive Officer. HCA is committed to the care and improvement of human life and strives to deliver high quality, cost effective healthcare in the communities we serve. Building on the foundation provided by our Mission & Values, HCA puts patients first and works to constantly improve the care we give them by implementing measures that support our caregivers, help ensure patient safety and provide the highest possible quality. Investing in our communities is important to us. HCA typically invests about $1.5 billion annually to keep our facilities modern and up-to-date technologically and to expand and add services where needed. Focusing primarily on communities where the company is a leading healthcare provider, HCA selectively adds new facilities in order to better serve our communities. And because two HCA founders were physicians, we value highly the strong relationships we've created with local physicians. We endeavor to provide them with a wide array of services and modern facilities in order to help them deliver the best possible care.

HCA Healthcare

Maintenance Engineer

Jobvite Talemetry Organic Easy Apply

Project Management Overseeing the work performed by the assigned staff Planning, Scheduling, and Profitability Provides direction for what is to be included in the design package issue (pricing documents, SD, DD, and CD) Works with projects Lead Mechanical Engineer to ensure that project schedule will be met and complete documents provided for each submission Designs project within provided design budget and track additional hours utilized when the scope is expanded Professional Development Maintains required licensing CEU Proactively attempts to receive in-house/out-of-house training to maintain create design skills Leadership Manages assigned staff on the projects Works as part of the larger team, and not as an independent island. Travel Up to 20% annually Education/Experience: Bachelor's degree in mechanical engineering from an accredited university 7-10 years of relevant experience To thrive in this role, you'll need: Licensed Professional Engineer (P.E.) - Mechanical Engineering Knowledge of Building Systems HVAC and/or Plumbing Design Experience performing HVAC engineering calculations including heating/cooling load calculations, airflow/duct sizing and equipment selection Experienced utilizing Revit for 3D design Environmental Factors and/or Physical Requirements: While performing the duties of this job, this position is required to have ordinary ambulatory skills sufficient to visit other locations; and the ability to stand, walk, stoop, kneel, crouch, and manipulate (lift, carry, move) light to medium weights of 10-50 pounds.

Protection Engineer Jobs in Utah

Electrical Engineer III (Power Systems) The Dennis Group Inc

Facilities Maintenance Engineer II University of Utah

Lead Engineer, Pricing & Decision Systems One Park Financial

Project Professional Electrical Engineer Geosyntec Consultants, Inc.

Electrical Engineer ConsultNet

Mechanical Engineer Entry Level (Start Summer 2027) External Dennis Group Jobs

Mechanical Engineer, Mid-Level (HVAC & Utilities) External Dennis Group Jobs

16237 - Network Engineer Smith Johnson Tech

Maintenance Engineer III University of Utah

Maintenance Engineer II University of Utah

Electrical Engineer III (Power Systems) External Dennis Group Jobs

Electrical Engineer II (Power Systems) External Dennis Group Jobs

Electrical Engineer Intern External Dennis Group Jobs

Electrical Engineer Intern/Co-Op (Building power systems) External Dennis Group Jobs

Electrical Engineer Cementation USA

Senior Electrical Engineer Cementation USA

Mechanical Engineer ConsultNet

Maintenance Engineer HCA Healthcare

Mechanical Engineer The Haskell Co

Electrical Engineer Intern/Co-Op (Building Power Systems) Dennis Group

Similar Job Searches

Stand out to leading employers.