UNKNOWN

FEED

Manage and lead Process Hazard Analysis (PHA), Layer of Protection Analysis (LOPA), Facility Siting Studies, and other PSM-related Studies for existing processes, projects, and modifications. Assist sites in addressing Safety Instrumented System (SIS) documentation and supporting Safety Integrity Level (SIL) scenario analysis, and Functional Safety Assessments.

Kaneka Pharma America LLC

Process Safety Engineer

linkup_via_bold

Provides oversight and direction for key Process Safety Management (PSM) systems owned by the HSSE Department which includes but are not limited to the following duties: Implements and where necessary develops KNA'S CSR management systems, procedures and process improvements as needed to ensure continuous improvement in all OSHA, PSM, and EPA RMP regulations. Process Safety Engineer is primarily responsible for supporting compliance with OSHA's Process Safety Management (PSM) rule (29 CFR Part 1910.119), the EPA's RMP rule (40 CFR Part 68), and various industry guidance such as facility siting (API RP 752).

Sr Process Safety Engineer

Strong candidates are expected to have a broad set of skills and knowledge encompassing packaged equipment systems such as: fired heaters, flares, incinerators, boilers, SCRs, cooling towers, air-cooled condensers, air compressors, nitrogen generation systems, or process treatment skids. General industries served are related to the Natural Gas, LNG, FLNG, Ammonia, Urea, Fertilizers, Gas Processing, Midstream, Sulfur, Hydrogen, Power Production, Data Center, and other general heavy industries.

YEAR

Black & Veatch Holding Co

Packaged Equipment and Heat Exchanger Engineer - Advanced Process Solutions

FULL_TIME

In QDC's current delivery model the detailed design is performed by Quanta engineering OpCos and third-party engineers of record; the Senior Lead Mechanical Engineer provides technical oversight of that work, sets and enforces QDC design criteria, reviews calculations, drawings and specifications, and asks the questions the designer cannot: is the system complete, does it work with the equipment and the rest of the project, and will it flush, test, start up and operate the way the client expects. The Senior Lead Mechanical Engineer reports to the (Sr) Engineering Project Manager, QDC, supports all projects in the division, works hand in hand with the Senior Lead Mechanical-Piping Designer, and serves as the mechanical technical point of contact between Engineering, Procurement, Field Operations and the client from proposal and early engineering through detail design, construction, startup and commissioning.

Quanta Infrastructure Solutions Group, LLC

Sr Lead Mechanical Engineer - QDC

[AW]-iCims

Project Engineer- Lexington ***Work Location: Lexington, KY*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen POSITION SUMMARY: The Project Engineer will provide construction project engineering services, including project observation, quality assurance, contract administration, and reporting to government personnel. Maintain orderly working files for correspondence, meeting minutes and conference records, submittal data and registers, inspection and monthly progress reports, punch lists, and contract documents, including amendments, notices to proceed, change orders, and modifications.

Accura Engineering

Project Engineer- Lexington

sourcestack_via_bold

Project Engineer- Richmond ***Work Location: Richmond, KY*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen POSITION SUMMARY: The Project Engineer will provide construction project engineering services, including project observation, quality assurance, contract administration, and reporting to government personnel. Maintain orderly working files for correspondence, meeting minutes and conference records, submittal data and registers, inspection and monthly progress reports, punch lists, and contract documents, including amendments, notices to proceed, change orders, and modifications.

Project Engineer- Richmond

The Electrical Engineer III is responsible for the development, design, analysis, testing, troubleshooting, and implementation of new and improved electrical systems and equipment. Master of Science degree from an ABET-accredited program or Bachelor's Degree in Electrical Engineering/Electrical Engineering Technology.

Vets Hired

Rail King Electrical Engineer III

The role also serves as the technical integrator across all project phases, ensuring engineering deliverables, design assumptions, and technical interfaces are aligned and execution-ready. That's why we're looking for curious, bold individuals who are eager to grow and create new ways forward-people who want to join us in building a more sustainable, innovative, and inclusive world.

Repsol SA

Senior Project Engineer

Coordinate with JSC Pressure Systems personnel to manage cooling tower, liquid nitrogen cryogenic tank farm, oil/chemical storage, vacuum pumps and high-pressure systems, including the preparation of required Work Authorizing Documents (WADs). Primary engineer to continue and enhance maintenance plans systems including cooling tower, liquid nitrogen bulk storage cryogenic tanks, oil/chemical storage, vacuum mechanical pumps and blowers.

Mclaurin Aerospace

Facility Maintenance Engineer

Talent Acquisition

We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference?

Cryogenics Mechanical Engineer

Ensure a meeting cadence to conduct Level 2 Problem Solving exercises to maintain continuous improvement by routinely investigating smaller events and using a work process that identifies and mitigates all causes. Actively contribute to the site loss control performance by conducting loss control tours as assigned, identifying, reporting, and mitigating safety hazards that could cause harm to personnel and equipment.

Baystar Ltd

Process Engineer

Purpose of the Job: The Rotating Equipment Engineer Supervisor is responsible for leading the site rotating equipment reliability and condition monitoring programs to improve equipment availability, optimize mean time between failures, drive safe and environmentally compliant operations, and develop the technical capabilities of the rotating equipment reliability team. The position requires strong leadership and strategic collaboration with Operations, Maintenance, Process Engineering, Capital Projects, Corporate Technical Networks, contractors, and vendors to resolve equipment issues, implement reliability improvements, and lead turnaround and outage activities.

INEOS Automotive Ltd

Rotating Equipment Engineer Supervisor

Cybersecurity Risk Management - The process of developing cyber risk assessment and treatment techniques that can effectively pre-empt and identify significant security loopholes and weaknesses, demonstrating the business risks associated with these loopholes and providing risk treatment and prioritization strategies to effectively address the cyber-related risks, threats and vulnerabilities, ensuring appropriate levels of protection, confidentiality, integrity and privacy in alignment with the security framework. DevSecOps - A set of practices that automates the integration of security at every phase of the software development lifecycle, from initial design through integration, testing, deployment, and software delivery, with an aim towards shortening the systems development life cycle and pas well as continuous delivery and a security first approach.

Marathon Petroleum Corp

Senior Platforms Engineer - AI & Data Platforms

The Rotating Equipment Engineer Supervisor is responsible for leading the site rotating equipment reliability and condition monitoring programs to improve equipment availability, optimize mean time between failures, drive safe and environmentally compliant operations, and develop the technical capabilities of the rotating equipment reliability team. The position requires strong leadership and strategic collaboration with Operations, Maintenance, Process Engineering, Capital Projects, Corporate Technical Networks, contractors, and vendors to resolve equipment issues, implement reliability improvements, and lead turnaround and outage activities.

INEOS

ea_via_bold

Graduate Rotational Opportunities at Westlake (GROW) is a leadership development program for newly graduated engineering students within the Performance and Essential Materials business segment at Westlake Corporation. Through high performance teamwork, our engineers deliver solutions that allow us to manufacture and supply essential products that enhance the daily lives of people around the globe.

<p>
Westlake Chemical (NYSE: WLK) makes chemical and plastic products. We are a quality manufacturer and dependable global supplier of petrochemicals, plastics and building products. Our mission is to serve our clients by enhancing daily life through the products and services we provide.
</p>



Westlake Chemical Corp.

Chemical Engineer (Rotational Program)

Mechanical Engineer (Rotational Program)

Westlake

Electrical Engineer (Rotational Program)

The Corrosion & Materials Engineer is recognized as a technical authority within INEOS and is expected to actively participate in relevant industry forums and committees, including API committees and NACE/AMPP corrosion groups, ensuring that O&P remains aligned with emerging codes, NDE technologies, and best practices in materials science, corrosion control, and welding engineering. Collaborate with the Chief Inspector and site inspection teams to ensure damage mechanisms are properly identified, monitored, and managed through appropriate inspection plans and techniques; collaborate with site process engineering and operations to understand how process conditions, upsets, and operating envelopes affect damage mechanisms and corrosion rates.

Corrosion and Materials Engineer

OTHER

The Welding & Materials Engineer is responsible for developing, reviewing, and qualifying Welding Procedure Specifications (WPSs) and Procedure Qualification Records (PQRs), overseeing weld and welder qualification testing, supporting material and mechanical testing programs, conducting quality and process audits, and evaluating fabrication and inspection documentation. Determine applicable welding processes, base materials, filler metals, preheat/interpass requirements, post-weld heat treatment, joint designs, and essential variables for welding qualifications.

Protection Engineer Jobs in Houston, TX

Process Safety Engineer Kaneka Pharma America LLC

Sr Process Safety Engineer Kaneka Pharma America LLC

Packaged Equipment and Heat Exchanger Engineer - Advanced Process Solutions Black & Veatch Holding Co

Sr Lead Mechanical Engineer - QDC Quanta Infrastructure Solutions Group, LLC

Project Engineer- Lexington Accura Engineering

Project Engineer- Richmond Accura Engineering

Rail King Electrical Engineer III Vets Hired

Senior Project Engineer Repsol SA

Facility Maintenance Engineer Mclaurin Aerospace

Cryogenics Mechanical Engineer Mclaurin Aerospace

Process Engineer Baystar Ltd

Rotating Equipment Engineer Supervisor INEOS Automotive Ltd

Senior Platforms Engineer - AI & Data Platforms Marathon Petroleum Corp

Rotating Equipment Engineer Supervisor INEOS

Chemical Engineer (Rotational Program) Westlake Chemical Corp.

Mechanical Engineer (Rotational Program) Westlake Chemical Corp.

Electrical Engineer (Rotational Program) Westlake

Corrosion and Materials Engineer INEOS Automotive Ltd

Welding & Materials Engineer Exo Group, LLC

Welding & Materials Engineer EXO

Similar Job Searches

See More Jobs

Stand out to leading employers.