NewFluids/Mechanical Test Engineer II - Lunar Permanence Blue OriginFluids/Mechanical Test Engineer II - Lunar PermanenceHuntsville, AL$99,201–$138,880.35 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.* Minimum Qualifications:* BS in Aerospace Engineering, Mechanical Engineering, Chemical Engineering or related technical discipline.* 2+ years of relevant testing experience including pumps, valves, thermal control elements, propulsion elements, sensors, pneumatic/hydraulic fluids, and/or piping.*
NewModeling and Simulation Engineer, Mid-Level Simulation Technologies Inc. (simtech)Modeling and Simulation Engineer, Mid-LevelHuntsville, ALThis role requires developing and maintaining a high-fidelity 6DOF simulation of a weapon system with seeker and the digital environment used to characterize end-to-end system performance, supporting flight software integration, and performing trade studies that inform design and requirements decisions. Develop, extend, and maintain a closed-loop 6DOF flight simulation written in C/C++.Develop and integrate subsystem models spanning flight dynamics, control actuation system, motor, gimbal, seeker, guidance, navigation, and control.
NewAvionics Systems Engineer III Blue OriginAvionics Systems Engineer IIIHuntsville, AL$130,706–$182,987.70 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. The successful candidate is equally comfortable writing a system requirements specification and using/building a project agile task board with all critical linkages & dependencies defined, and understands that sustained program success requires both.
Turbo Machinery Manufacturing Engineer II, III, Sr. Blue OriginTurbo Machinery Manufacturing Engineer II, III, Sr.Huntsville, Alabamaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Structural Design Engineer (ES5) Amentum Services IncStructural Design Engineer (ES5)Huntsville, ALFamiliarity with ASME Y14.5 / ISO 1101 to own the dimensional strategy, draft compliant engineering drawings, and execute advanced tolerance stack-up analyses using CAD to ensure seamless manufacturing and assembly is preferred. Primary job duties include: Engage in multi-discipline engineering teams in the creation of new designs (CAD models, documents, drawings) and research with a focus on propulsion devices and support hardware.
Structural Design Engineer (ES5) AmentumStructural Design Engineer (ES5)Huntsville, AlabamaFamiliarity with ASME Y14.5 / ISO 1101 to own the dimensional strategy, draft compliant engineering drawings, and execute advanced tolerance stack-up analyses using CAD to ensure seamless manufacturing and assembly is preferred. Engage in multi-discipline engineering teams in the creation of new designs (CAD models, documents, drawings) and research with a focus on propulsion devices and support hardware.
High Speed Systems Engineer LeidosHigh Speed Systems EngineerHuntsville, PennsylvaniaAs a Leidos Digital Systems Engineer, you will blend Systems Engineering, Systems Architecture, and technical Project Management to guide requirements definition, architecture working groups, and System Integration across the engineering lifecycle. • Master's Degree in Aerospace Engineering, Systems Engineering, Mechanical Engineering, Electrical Engineering, Industrial Engineering, Computer Engineering, Physics, or a related STEM discipline with 4+ years of experience.
Flight Dynamics Engineer The Aerospace CorpFlight Dynamics EngineerHuntsville, AL$95,200–$165,500 / yearExperience with nonlinear programming (non-linear programming), direct methods, gradient-based optimization, parameter optimization, genetic algorithms, evolutionary algorithms, heuristic optimization methods, indirect methods, and/or calculus of variations. Graduate level course work, research and/or experience in one or more of the following areas: orbital mechanics, astrodynamics, ascent trajectory modeling, hypersonic flight simulation, optimal control, flight mechanics, and/or trajectory modeling and simulation.
Thermal Engineer Staff (Level 4) Lockheed Martin CorpThermal Engineer Staff (Level 4)Huntsville, AL$104,500–$184,115 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115. As a senior member of the thermal engineering team, you will lead and execute high-fidelity thermal analyses across missile components, subsystems, and fully integrated systems - including ground support equipment - throughout the entire lifecycle.
Mechanical Engineer, Rocket Motor Systems ANDURIL INDUSTRIESMechanical Engineer, Rocket Motor SystemsHuntsville, AL$85,000–$126,000 / yearTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind: No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. To achieve our vision of becoming a large-volume provider of tactical rocket motors, we will develop differentiated products and services that maximize our customers' capabilities, and we will establish and maintain a reputation of Quality and Reliability.
Principal Research Scientist/Engineer - Huntsville - Pooled Position Auburn UniversityPrincipal Research Scientist/Engineer - Huntsville - Pooled PositionHuntsville, AL$73,090–$278,210 / yearFull timeProvide Subject Matter Expertise to senior leaders in government and industry related to protecting the nation’s critical infrastructure systems (energy, water, transportation, food, commerce, etc.). Sweet Home Alabama: The Auburn/Opelika area offers southern charm, vibrant downtown scenes, top-ranked schools, and easy access to Atlanta, Birmingham, and the Gulf of Mexico beaches.
NewLead, Mechanical Engineer- Composite Case Design L3Harris Technologies IncLead, Mechanical Engineer- Composite Case DesignHuntsville, ALThis position requires the ability to work with moderate to limited oversight in defining objectives, determining technical approaches, delegating tasks, reviewing deliverables, and coaching and training other employees across the company within area of expertise. The position requires substantial technical expertise in the area of carbon fiber epoxy material systems, pressure vessel design, filament winding manufacturing, and Classical Lamination Theory.
NewHuman Landing System (HLS) Engineer- APS Systems (SME1) Amentum Services IncHuman Landing System (HLS) Engineer- APS Systems (SME1)Huntsville, ALProvide systems insight and lead risk mitigation efforts for Artemis III through Artemis V propulsion systems, identifying technical and programmatic risks and ensuring alignment with NASA safety, mission assurance, and flight readiness objectives. Develop models and analysis tools, provide analytical documentation such as trade studies, hazards assessments, fault tolerance designs, certifications for flight, launch vehicle data reviews.
HLS Engineer - APS Systems Amentum Services IncHLS Engineer - APS SystemsHuntsville, ALProvide systems insight and lead risk mitigation efforts for Artemis III through Artemis V propulsion systems, identifying technical and programmatic risks and ensuring alignment with NASA safety, mission assurance, and flight readiness objectives. Develop models and analysis tools, provide analytical documentation such as trade studies, hazards assessments, fault tolerance designs, certifications for flight, launch vehicle data reviews.
NewHuman Landing System (HLS) Engineer- APS Systems (SME1) AmentumHuman Landing System (HLS) Engineer- APS Systems (SME1)Huntsville, AlabamaProvide systems insight and lead risk mitigation efforts for Artemis III through Artemis V propulsion systems, identifying technical and programmatic risks and ensuring alignment with NASA safety, mission assurance, and flight readiness objectives. ·Develop models and analysis tools, provide analytical documentation such as trade studies, hazards assessments, fault tolerance designs, certifications for flight, launch vehicle data reviews.
NewEngineer - Manufacturing II LancesoftEngineer - Manufacturing IIHuntsville, AL$54Experience with at least one of the following: avionics, wire harnesses, structures, spacecraft propulsion systems, mechanical systems, thermal protection systems, thermal management systems, and environmental instrumentation for aerospace. Minimum Qualifications Bachelor of Science in Electrical Engineering, Mechanical Engineering, Electromechanical Engineering, Manufacturing Engineering, or related discipline.
NewEngineer - Manufacturing III LancesoftEngineer - Manufacturing IIIHuntsville, AL$68Experience with at least one of the following: avionics, wire harnesses, structures, spacecraft propulsion systems, mechanical systems, thermal protection systems, thermal management systems, and environmental instrumentation for aerospace. Minimum Qualifications Bachelor of Science in Electrical Engineering, Mechanical Engineering, Electromechanical Engineering, Manufacturing Engineering, or related discipline.
Lead, Project Engineer (Responsible Engineering Authority) HSV L3Harris Technologies IncLead, Project Engineer (Responsible Engineering Authority) HSVHuntsville, ALBasic Qualifications: Bachelor's Degree and minimum 9 years of prior relevant Project Engineering experience; OR Graduate Degree and a minimum of 7 years of prior related Project Engineering experience; OR In lieu of a degree, minimum of 13 years of prior related Project Engineering experience. The Lead Project Engineer (Responsible Engineer Authority) will represent the Engineering Center of Excellence (COE) in evaluating and resolving production program product non-conformances, and will be instrumental in the design, implementation, and continuous improvement of new manufacturing processes.
Materials and Process Engineer III - Engines Blue Origin Enterprises LPMaterials and Process Engineer III - EnginesHuntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewControls Engineer Sr Blue OriginControls Engineer SrHuntsville, AL$197,529–$276,539.55 / yearKalman filtering) is a plusExperience with validation and verification approaches such as unit testing, system simulation, hardware‑in‑the‑loop testing or integrated subsystem testingExperience with Apache Subversion or Git or similar revision control systemsExposure to lean software development practices and techniques; including experience with tool automation and software development using Python and C/C++Highly organized team player with excellent technical written and verbal communication skillsDesiredAdvanced graduate degree in engineering or related control systems field with 6+ years of experience developing mission or safety‑critical control system solutionsExperience developing real‑time embedded control solutions (classical, modern, non‑linear, optimal, etc.) for complex aerospace mechanical, fluid, thermal and gas systemsExperience developing controls applications for hydraulic servo‑valve systems and electrical motorsExperience modelling and analysing control solutions with I/O transducers: displacement, rate and acceleration sensors; pressure and temperature sensors; servo and solenoid actuators; etc. QualificationsBachelors degree in engineering or related control systems field with 8+ years of experienceExperience developing embedded control solutions for complex aerospace mechanical, thermal, hydraulic, fluid and gas systemsExperience with subsystem modeling, analysis and controls application development tools such as Matlab/Simulink (including autocoding)Experience with classical and modern control design and analysis techniques; exposure to optimal control and estimation techniques (e.g.
System Safety Engineer (BT-26121) Bastion Technologies IncSystem Safety Engineer (BT-26121)Huntsville, ALThe work will involve evaluating launch vehicle and upper-stage hazards across design, integration, test, ground processing, and mission operations; developing and reviewing hazard analyses, safety requirements, verifications, risk assessments, and safety review products; and coordinating with NASA, prime contractors, and commercial upper-stage providers to ensure propulsion, avionics, software, structural, pressure-system, cryogenic, separation, abort/contingency, and ground-interface hazards are identified, controlled, and formally dispositioned. Desired areas include LH2/LOX leakage, fire/explosion hazards, over-pressurization, COPV/pressure vessel concerns, engine shutdown/restart failures, common-cause failures, software-commanding errors, valve failures, loss of thermal control, separation system failures, disposal failures, and ground servicing hazards.
NewSystem Safety Engineer Bastion TechnologiesSystem Safety EngineerHuntsville, ALThe work will involve evaluating launch vehicle and upper-stage hazards across design, integration, test, ground processing, and mission operations; developing and reviewing hazard analyses, safety requirements, verifications, risk assessments, and safety review products; and coordinating with NASA, prime contractors, and commercial upper-stage providers to ensure propulsion, avionics, software, structural, pressure-system, cryogenic, separation, abort/contingency, and ground-interface hazards are identified, controlled, and formally dispositioned. Desired areas include LH2/LOX leakage, fire/explosion hazards, over-pressurization, COPV/pressure vessel concerns, engine shutdown/restart failures, common-cause failures, software-commanding errors, valve failures, loss of thermal control, separation system failures, disposal failures, and ground servicing hazards.
Sr Mechanical Engineer (Design Engineering - Solid Rocket Motors) General Dynamics Ordnance & Tactical SystemsSr Mechanical Engineer (Design Engineering - Solid Rocket Motors)Huntsville, Alabama$100,300–$135,700 / yearCompany Overview: General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world. In addition to the benefits discussed above, the company offers the following voluntary benefits: Critical Illness Insurance, Accident Insurance, Identify Theft Protection, Enhanced Legal Services, Auto and Home Insurance, Pet Insurance, Commuter Benefits, Hospital Indemnity Insurance, Educational Assistance.
Systems Engineer, Interface Control Documents Amentum Services IncSystems Engineer, Interface Control DocumentsHuntsville, ALWorking knowledge of digital engineering tools databases such as DNG MagicDraw Power VIPersonnel are required to be self-directed effective team players familiar with working in a fast-paced dynamic work environment who are willing to assume lead roles in the SLS requirements management verification and validation planning effort. Perform technical integration across multiple NASA Centers diverse engineering and programproject organizations and a variety of engineering disciplines such as propulsion structures avionics and power guidance and navigation flight software and human engineering.
Mechanical Design Engineer (ES2) Amentum Services IncMechanical Design Engineer (ES2)Huntsville, ALOur Structural & Mechanical Design and Analysis team is a high performing group executing challenging tasks for the insight, design, and analysis of the Space Launch System (SLS) ranging from large structural elements to payload attachment hardware. Capable of working with external teams including main propulsion systems, reaction control systems, quality control, ground support systems, safety, and system engineering and integration.
NewCFD Analysis Engineer-Entry Level (ES2) AmentumCFD Analysis Engineer-Entry Level (ES2)Huntsville, ALASED has been a primary contractor for NASA since 1989 and supports marquee NASA programs, including the Space Launch System, International Space Station, space optics fabrication, earth and space sciences, and advanced propulsion system development. Position DescriptionThis position will provide Computational Fluid Dynamics analysis support to the Aerosciences branch (EV33) in the Structural Design and Analysis Division (EV30) at MSFC's Spacecraft and Vehicle Systems Department.
Avionics, Instruments and GNC Engineer II Blue Origin Enterprises LPAvionics, Instruments and GNC Engineer IIHuntsville, AL$107,136–$149,990.40 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Software Integration Engineer II Blue OriginSoftware Integration Engineer IIHuntsville, Alabamaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As a Software Integration Engineer, you will deploy and integrate "River," our Electron-based command and control (C2) application, onto test stands and control hardware—bringing up driver-level PLC and packaged control surfaces, validating data storage and real-time send/receive, and troubleshooting in the loop.
NewStructural Design/Optimization Engineer (ES3) Amentum Services IncStructural Design/Optimization Engineer (ES3)Huntsville, ALPrimary job duties include: Engage in multi-discipline engineering teams in the creation of new designs (CAD models, documents, drawings) and research with a focus on propulsion devices and support hardware. From the transformative Team Lead Academy to education reimbursement, personalized mentoring, and engaging company-sponsored networking events, you have the power to shape your professional journey in a way that aligns with your aspirations.
NewStructural Design/Optimization Engineer (ES3) AmentumStructural Design/Optimization Engineer (ES3)Huntsville, AlabamaEngage in multi-discipline engineering teams in the creation of new designs (CAD models, documents, drawings) and research with a focus on propulsion devices and support hardware. From the transformative Team Lead Academy to education reimbursement, personalized mentoring, and engaging company-sponsored networking events, you have the power to shape your professional journey in a way that aligns with your aspirations.
NewSenior Engineer /Scientist - FLRAA System Studies & Simulation IncSenior Engineer /Scientist - FLRAAALhas wholly owned subsidiaries that expand the customer base and increase our annual growth rate: KBFS - provides aviation pilot training, heavy lift, aircraft maintenance, and related aircraft services to government and commercial requirements IAW multiple FAA certifications; S3I - provides OCONUS FMS technical services, maintenance, and aviation platform training; and GLSS - provides SCA/CBA contract aviation maintenance. Develop and deliver system derivative program documentation, including: Acquisition strategies, draft Statements of Work (SOWs), Technical Data Packages (TDPs), Engineering drawings and specifications, Requests for Proposals (RFPs), and Cost estimates and programmatic reports.
Marine Development Engineer, Electrical Technology Penske CorporationMarine Development Engineer, Electrical TechnologyHuntsville, ALAs a Marine Development Engineer at Ilmor, you will play a key role in the development of next-generation marine powertrain technologies, working hands-on with combustion engines, electric propulsion systems, military programs and advanced electronic controls. Working alongside a team of world-class engineers, you will contribute to the development of industry-leading solutions that deliver exceptional performance, reliability, and durability on the water.
NewSenior Engineer /Scientist - Flraa S3Senior Engineer /Scientist - FlraaRedstone Arsenal, ALhas wholly owned subsidiaries that expand the customer base and increase our annual growth rate: KBFS - provides aviation pilot training, heavy lift, aircraft maintenance, and related aircraft services to government and commercial requirements IAW multiple FAA certifications; S3I - provides OCONUS FMS technical services, maintenance, and aviation platform training; and GLSS - provides SCA/CBA contract aviation maintenance. Develop and deliver system derivative program documentation, including: Acquisition strategies, draft Statements of Work (SOWs), Technical Data Packages (TDPs), Engineering drawings and specifications, Requests for Proposals (RFPs), and Cost estimates and programmatic reports.
NewStructural Design Engineer With Artificial Intelligence Optimization CFD Research CorporationStructural Design Engineer With Artificial Intelligence OptimizationHuntsville, ALBased in Huntsville, Alabama where laboratory facilities and headquarters are located, CFD Research also has office and laboratory facilities in Dayton, Ohio, prototyping test and evaluation facilities in Hollywood, Alabama, and office facilities in Fort Walton Beach, Florida. CFD Research has earned multiple national awards for successful application and commercialization of innovative component/system technology prototypes, multi-physics simulation software, multi-disciplinary analyses, and expert support services.
Launch Vehicle Manufacturing Quality Engineer ManTechLaunch Vehicle Manufacturing Quality EngineerDecatur, ALMANTECH seeks a highly skilled and detail-oriented Launch Vehicle Manufacturing Quality Engineer to join our team supporting the United States Space Force Space Systems Command (SSC) Assured Access to Space (AATS) – National Security Space Launch (NSSL) program. + Generate Quality Program Surveillance, Component Surveillance, and Consolidated Surveillance Reports across avionics, composites, propulsion, hydraulics, and structural systems, as needed.
NewPrincipal Research Scientist/Engineer- Huntsville (Pool) Auburn UniversityPrincipal Research Scientist/Engineer- Huntsville (Pool)Huntsville, AL$73,090–$278,210 / yearFull timeAreas of focus may include modeling and simulation; systems engineering and integration; advanced and additive manufacturing; autonomous systems: robotics; electromagnetics, mechanical and electrical systems design, thermal and structural analysis, materials science and engineering; propulsion systems; and multi-program project management supporting government and industry sponsors. Auburn University’s Office of the Senior Vice President for Research and Economic Development and the Applied Research Institute (ARI) is seeking candidates for multiple Principal Research Scientist/Engineer positions in anticipation of securing contract funding across a broad range of engineering and scientific disciplines.
NewLead Hardware-in-the-Loop Engineer A/V Services LLCLead Hardware-in-the-Loop EngineerHuntsville, ALJob DescriptionThe Hardware-in-the-Loop (HWIL) Lead will be responsible for the architecture, development, integration, and deployment of NGCM HWIL systems supporting Guidance, Navigation & Control (GNC), avionics, and missile subsystem validation. ITAR RequirementThis position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”).
Staff Survivability and Operations Analysis Engineer Archer Aviation IncStaff Survivability and Operations Analysis EngineerHuntsville, AL$130,800–$179,900 / yearExperience with design, analysis, fabrication, and test of survivability technologies (RCS, IR, Acoustics); ASE, and mission systems; Operations Analysis to include numerous modeling and simulation environments such as AFSIM and knowledge of domestic and international threat systems is a must. What you'll do: Candidates will be a member of the Archer Defense and Advanced Programs organization and will be part of the team to incubate, market, capture, and execute (technical, cost, and schedule) advanced programs applied to our Archer Defense portfolio.
NewLead, Project Engineer (Responsible Engineering Authority) HSV L3HarrisLead, Project Engineer (Responsible Engineering Authority) HSVHuntsville, ALJob TitleLead, Project Engineer (Responsible Engineering Authority)Job Code40011LocationHuntsville, ALSchedule4/10: Employees work 10 hour days, 4 days a weekJob DescriptionL3Harris is seeking experienced Project Engineers for our new, state‑of‑the‑art Production Facility located near the Huntsville International Airport in Huntsville, AL. [TDP Integration, DFMEA/PFMEA risk management/updates, KC updates/classification, MRL improvements supporting AOP].Provide factory‑specific technical inputs enabling root cause and corrective action and sector systemic learning.
NewSpace Systems Test Engineer Intern Blue OriginSpace Systems Test Engineer InternHuntsville, ALInterns will work closely with engineering teams on various test projects, which include testing components for fluid, propulsion, and avionics systems. The internship offers hourly compensation at $38, with housing and relocation support provided.#J-18808-Ljbffr.
NewElectrical Design Engineer, Avionics Ground and Test Equipment III Blue OriginElectrical Design Engineer, Avionics Ground and Test Equipment IIIHuntsville, AL$130,706–$182,987.70 / yearResponsibilitiesDefine requirements, architectures, and interfaces for avionics ground and test equipmentConduct make/buy trades for components of avionics ground and test systemsDesign avionics ground test equipment composed of COTS and custom‑designed componentsSupport integration and test of avionics hardware, software, instrumentation, and harnessing as a representative of the test equipment hardware teamIdentify anomalous behavior, rapidly determine root cause, and implement corrective action independently or in close collaboration with stakeholdersValidate and verify that avionics ground and test systems are meeting customer expectations and requirementsTriage remotely networked systemsMinimum QualificationsPassion for our mission: Millions of people living and working in space! Minimum of a B.S. degree in computer engineering, electrical engineering, or similar.5+ years performing some or all of the following activities: electrical design, systems engineering, electronics integration, system validation and verification, networking, scripting, test equipment designExperience working with data communication protocolsExperience designing signal conditioning and analog‑to‑digital solutions for hardware‑in‑the‑loop (HIL) test equipmentDemonstrated ability building trusting and effective working relationships that improve team performance, deliver results, and strengthen our cultureStrong organizational, analytical skills, and digital skillsDemonstrated track record of resourcefulness and success from previous assignments and working with interdisciplinary and multi‑functional teams.
Sr Principal Structural Engineer - 19110 Northrop Grumman CorpSr Principal Structural Engineer - 19110Huntsville, AL$135,800–$203,600 / yearContribute to trade studies, architecture development, and system engineering, including producibility and affordability design influence, to produce credible conceptual and preliminary weapon system designs that meet potential customers' performance, cost, schedule, and risk thresholds while informing them of the surrounding design space for capability considerations, especially capability versus life cycle and cost versus technical availability date. Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs.
Lead Hardware-in-the-Loop Engineer AeroVironment IncLead Hardware-in-the-Loop EngineerHuntsville, AL$133,500–$189,525 / yearThe Hardware-in-the-Loop (HWIL) Lead will be responsible for the architecture, development, integration, and deployment of NGCM HWIL systems supporting Guidance, Navigation & Control (GNC), avionics, and missile subsystem validation. In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction.
Mid-Level Aerospace Engineer IronMountain SolutionsMid-Level Aerospace EngineerHuntsville, AlabamaAdvisory and assistance services may include advisory assistance support in; vulnerability and risk assessment and mitigation; project justification and defense; program planning; evaluation and analyses of programs, projects, budgets and performance; and project execution, transition and commercialization. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use tools or controls; normal physical activity (reach with hands and arms; climb stairs); and communicate effectively with all levels of employees and leadership.
Senior Systems Engineer & Program Manager Waypoint Human CapitalSenior Systems Engineer & Program ManagerHuntsville, AlabamaIn this senior role, you will serve as a technical subject matter expert (SME) and programmatic leader, guiding a multidisciplinary team across all phases of space system design, development, and maturation while interfacing directly with NASA at Marshall Space Flight Center (MSFC). What Required Skills You'll Bring: Bachelor’s degree in Aerospace Engineering, Systems Engineering, Electrical Engineering, or a closely related technical discipline with 15+ years of progressive experience in space systems development and program management.
HLS Navigation Aerospace Engineer Amentum Services IncHLS Navigation Aerospace EngineerHuntsville, ALThe Amentum Space Exploration Division (ASED) Guidance, Navigation, and Control (GN&C) team is a high performing group executing challenging tasks to design and integrate GN&C systems for NASA projects ranging from NASA's Space Launch System(SLS) to NASA's Human Lander System. From sensor fusion and sensor model development to descent dynamics and visualization, this position will require a well-rounded background of navigation skills, experience with computer programming, and the desire to perform high fidelity analyses to ensure successful navigation and landing of the HLS systems.
HLS Navigation Aerospace Engineer AmentumHLS Navigation Aerospace EngineerHuntsville, AlabamaThe Amentum Space Exploration Division (ASED) Guidance, Navigation, and Control (GN&C) team is a high performing group executing challenging tasks to design and integrate GN&C systems for NASA projects ranging from NASA’s Space Launch System(SLS) to NASA’s Human Lander System. From sensor fusion and sensor model development to descent dynamics and visualization, this position will require a well-rounded background of navigation skills, experience with computer programming, and the desire to perform high fidelity analyses to ensure successful navigation and landing of the HLS systems.
Senior Guidance, Navigation & Control (GNC) Engineer Gilmour Space Technologies Pty LtdSenior Guidance, Navigation & Control (GNC) EngineerHuntsville, ALIf you are a proactive team player with a passion to get Australia to space and a desire to succeed, please apply now by clicking the apply button and including your resume and cover letter or head to our website: CAREER | Gilmour Space Technologies | Rocket launch provider (gspace.com). You will work with a talented team of engineers to develop, analyse, test and operate launch vehicles, and its subsystems, with the aim of ensuring highly reliable flight.
Peraton National Security & Defense Hiring Event, Highly Cleared Required, May 14 Huntsville PeratonPeraton National Security & Defense Hiring Event, Highly Cleared Required, May 14 HuntsvilleHuntsville, Alabama$104,000–$166,000 / yearFull timeResponsibilities: Peraton invites you to our National Security and Defense Hiring Event, an exclusive opportunity to learn how we’re supporting current and upcoming mission-critical programs for our top national security customers in Huntsville, Alabama. Salary is determined by various factors, including but not limited to, the scope and responsibilities of the position, the individual’s experience, education, knowledge, skills, and competencies, as well as geographic location and business and contract considerations.
Structural Analyst II Blue Origin Enterprises LPStructural Analyst IIHuntsville, AL$99,201–$138,880.35 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.