UNKNOWN

FEED

Maintain generator engines and fuel injection equipment as required by the PMS and as directed by the Chief Engineer and Second Engineer. Perform routine and maintenance activities, including breakdown maintenance, as directed by the Chief Engineer and/or Second Engineer.

Maersk (a.k.a A P Moller)

Third Engineer

ea_via_bold

ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You will build new processes from the ground up, and routinely grade/improve execution of existing processes, driving continuous production improvement and ultimately be responsible for build-induced vehicle risk.

YEAR

Space Exploration Technologies Corp

Build Reliability Engineer Starship

Position will report to the Manufacturing Engineering Manager, with ME responsibility of residential final boiler assembly operations, cast iron block assembly operations, cast iron machining operations, subassembly/carton packing operations, radiation manufacturing operations, parts fulfillment operations and warehouse operations. This position will support, specify, and control the processes that the manufacturing operation relies on daily to satisfy customer demand and obtain the performance objectives set forth pertaining to: 1) Safety, Quality, Delivery and Cost/Value, and 2) the continuous improvement program.

Burnham Holdings, Inc.

Manufacturing Engineer

Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. This role combines hands-on measurement work (VNA, TDR, BERT) with simulation and cross-functional collaboration to ensure cable and connector systems meet demanding electrical performance targets at data rates up to 224G/448G PAM4.

Amphenol TCS

Senior Signal Integrity Engineer

AcquireTM

Technical management of utility systems: Manage all plant-wide utility infrastructure, including chillers, boilers, DI water systems, Clean Dry Air (CDA), vacuum systems, Process Cooling Water (PCW), circulating water and factory water supply & drainage systems. New project technical coordination: Take charge of scheme review, construction coordination, on-site construction supervision, system commissioning & acceptance, asset handover and closed-loop rectification of pending issues for all utility systems of new cleanrooms.

Applied Optoelectronics Inc

Utility Engineer

Amphenol High Speed Input Output is a market leader in high speed, high bandwidth interconnect solutions for the Telecom/Datacom market including AI infrastructure, storage, servers, routers, switches, networking and high-performance computing applications. Collaborate cross-functionally (product development, NPI, process, quality, operations, suppliers) to communicate risks/constraints and ensure automation solutions are safe, maintainable, scalable, and manufacturable.

Amphenol Communications Solutions

Advanced Automation Engineer

As a leading global provider of water and industrial process technology solutions, we help the world's most recognized companies achieve their sustainability and operational goals by implementing innovative approaches for water reuse, desalination, minimal and zero liquid discharge, and critical minerals recovery. At Aquatech, we tackle the challenges of critical minerals, water scarcity, and complexity by leveraging technology, expertise, and financing to deliver comprehensive solutions that enable competitive, sustainable infrastructure.

Aquatech

Equipment Selection Engineer

Experience working in a collaborative, team-based manufacturing environment; Experience with military vehicles; Experience with commercial blast room equipment and bead blasting of military or commercial vehicles; AMPP certification experience in processes of spray-painting military or commercial vehicles and equipment; Gage and equipment calibration and control ISO 9001-2008 experience. Typically requires a Bachelor''s degree in an engineering or technical discipline OR the overall equivalent combination of education and related work experience; Must be familiar with the use and maintenance of full face, continuous flow, respirator, and ventilation systems; Experience in root cause/corrective action, preventive action; Hands-on floor support experience, working with shop employees.

BAE Systems Plc

Manufacturing Engineer - 3rd Shift

Reporting to the Director of Engineering - Salty Snacks in the Salty Snacks Engineering Group and working remotely, traveling as needed, the Sr Packaging Systems Engineer position will, with minimal direction, lead the conceptual and detailed engineering design, execution, and implementation of medium complexity projects requiring functional and industry expertise while leveraging relationships to deliver business results. Knowledge and experience in Packaging systems design typical for the food and pharma industry, including: A strong understanding of common packaging systems unit operations and equipment, sanitary design and construction practices, GMP's and Food Safety, and common equipment suppliers in the following areas: o Product Distribution/Conveyors.

The Hershey Co

Sr Packaging Systems Engineer

Prepare and review design calculations, engineering drawings, specifications, cost estimate, and technical evaluations and reports for various water and wastewater facility projects. KCI's Sparks Water/Wastewater practice is seeking a Project Engineer with a focus on facility projects including pumping stations and treatment plants.

KCI Holdings Inc

Water/Wastewater Project Engineer

The primary focus of this role is to organize and drive engineering execution by maintaining schedules, coordinating technical reviews, tracking deliverables, managing action items, and ensuring alignment among engineering teams, suppliers, manufacturing sites, program management, and other stakeholders. As technical capability and product knowledge increase, perform selected engineering assignments such as drawing reviews, basic tolerance analyses, design updates, component evaluations, test-data reviews, and root-cause investigations under the guidance of experienced engineers.

Project Engineer - Product Component Development

Diagnose failures; perform failure analysis and corrective actions of internal and customer test failures - including correlation analysis of customer findings to internal test data, it also includes working with mechanical and signal integrity test labs to facilitate failure analysis. Amphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.).

Senior Electrical Test Engineer

Partner with cross-functional teams to investigate deviation events, recommend corrective actions and product disposition, and develop improvements using Lean tools and analytical skills (e.g., FMEA, SPC, 5-Why, 12 Step, DMAIC, Risk Assessments, Fishbone Diagram, etc.). Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable.

Development Quality Engineer

This role serves as the global subject matter expert for supplier quality management and is accountable for supplier qualification, development, audits, Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP) approvals, risk management, incoming quality performance, and supplier continuous improvement. Supplier APQP and PPAP; supplier qualification and development; supplier auditing; PFMEA and Control Plans; Statistical Process Control (SPC); Measurement System Analysis (MSA); capability analysis; root cause analysis and 8D; risk management; reliability concepts; Lean manufacturing; and Six Sigma.

Senior Supplier Quality Engineer

Quality Engineer

Actively collaborate with product designers on design reviews, component testing, qualification, and introduction of new mechanisms, including derivatives that address market demands for improved alignment and durability; participate in quality investigations to ensure mechanism specifications are met. Design and develop mechanisms for connector alignment, including guide pins, bearings, springs and structural components made from steel and aluminum, ensuring reliability under misalignment conditions and performing failure analysis on defects from customer applications and manufacturing processes.

Mechanical Engineer

Diagnose failures; perform failure analysis and corrective actions of internal and customer test failures - including correlation analysis of customer findings to internal test data, it also includes working with mechanical and signal integrity test labs to facilitate failure analysis. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable.

Electrical Test Engineer

Be responsible for the successful transition of products and processes from NPI phase to volume manufacturing into low-cost regions and regular interfacing with NPI and manufacturing engineering groups at the connector manufacturing facilities globally. Actively participate / integrate with product designers in support of design reviews, component and product testing and qualification, and introduction of new products including product derivatives supporting market demands.

Product Engineer

FULL_TIME

Experience with AACE's cost estimation classes and preparation of OPCC.Prior experience with civil site development for roadways and drainage, land development, dam decommissioning or removal, stream restoration, and/or fish passage engineering Experience with ArcGIS, HEC-RAS, SRH2D, HEC-HMS, or HydroCAD.Additional RequirementsMust possess permanent authorization to work in the United States Must be willing to travel and possess a valid driver's licenseAbout the PositionIn this role you will work directly with senior staff on all stages of project delivery from conceptual designs to issued for bid construction drawings. Salary: $68,000-$125,000/year (based on experience)Required QualificationsBS in Civil Engineering or related fieldErosion & sediment control and stormwater management design experience Prior exposure to engineering design/construction support tasksProficient with AutoCAD Civil 3DEngineer in Training (EIT)Preferred Qualifications4+ years of experience in civil engineeringDirect project experience using AutoCAD Civil 3D to advance design, including the use of alignments, profiles, corridors, grading, and civil basemap preparation with publicly available data products.

Kleinschmidt Group

Civil Engineer (Entry-Mid Level)

Talent Acquisition

The successful candidate will work closely with the Microelectronics Project Manager, a team of Project Engineers; and multidisciplinary engineering teams to support engineering, procurement, fabrication, construction, commissioning, startup, qualification, and operational turnover activities. This role differs from a traditional Project Engineer position by requiring the candidate to develop a strong understanding of microelectronics industry related equipment including wastewater treatment, water reclaim, ultrapure water, and zero liquid discharge/thermal systems.

Project Manager Jobs in Kentucky

Third Engineer Maersk (a.k.a A P Moller)

Build Reliability Engineer Starship Space Exploration Technologies Corp

Manufacturing Engineer Burnham Holdings, Inc.

Senior Signal Integrity Engineer Amphenol TCS

Utility Engineer Applied Optoelectronics Inc

Advanced Automation Engineer Amphenol Communications Solutions

Equipment Selection Engineer Aquatech

Manufacturing Engineer - 3rd Shift BAE Systems Plc

Sr Packaging Systems Engineer The Hershey Co

Water/Wastewater Project Engineer KCI Holdings Inc

Project Engineer - Product Component Development Amphenol TCS

Senior Electrical Test Engineer Amphenol TCS

Development Quality Engineer Amphenol TCS

Senior Supplier Quality Engineer Amphenol TCS

Quality Engineer Amphenol TCS

Mechanical Engineer Amphenol TCS

Electrical Test Engineer Amphenol TCS

Product Engineer Amphenol TCS

Civil Engineer (Entry-Mid Level) Kleinschmidt Group

Microelectronics Project Engineer - Entry Level Aquatech

Similar Job Searches

Stand out to leading employers.