UNKNOWN

FEED

Starlink Gateways are advanced ground stations antennas that are responsible for delivering internet from the ground to satellites - they must be high-precision, low-cost, high-performance in all weather conditions (from the Arctic Circle to the desert), and ultra-reliable over long periods of time. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Space Exploration Technologies Corp

Production Technician, Gateways Starlink

PERMANENT

Starlink Gateways are advanced ground stations antennas that are responsible for delivering internet from the ground to satellites – they must be high-precision, low-cost, high-performance in all weather conditions (from the Arctic Circle to the desert), and ultra-reliable over long periods of time. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable.

SpaceX

Production Technician, Gateways (Starlink)

greenhouse_via_bold

Starlink Gateways are advanced ground stations antennas that are responsible for delivering internet from the ground to satellites - they must be high-precision, low-cost, high-performance in all weather conditions (from the Arctic Circle to the desert), and ultra-reliable over long periods of time. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable.

Space Exploration Technologies

ea_via_bold

Able to work a physically demanding day (stand for long periods; work from your knees; ascend and descend ladders; lift, bend, twist, push and pull up to 50 lb, etc) while wearing protective equipment (respirator, coveralls, gloves, eye and ear protection, etc). To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, a lawful permanent resident of the U.S., a protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

X-Bow Launch Systems Inc

Production Technician

AlphaGraphics is growing an is seeking a talented Large Format Production Technician to join our vibrant sign department in our Downtown Austin center. You’ll be responsible for producing and finishing signs and vinyl graphics using roll to roll and flatbed printers, contour cutters, and laminators.

AlphaGraphics - US371

Large Format Production Technician

Pacific Office Automation is currently seeking a Production Print Repair Technician who is skilled in repairing and maintaining Konica Minolta, Canon, & Ricoh Production Printers for our office in Austin, Texas. With over 40 years of success in office equipment and technology sales/service, our growth and reputation have afforded us great relationships with top manufacturers such as Canon, Sharp, Konica Minolta, HP, Ricoh, Lexmark, and many more.

HOUR

Pacific Office Automation

Production Print Technician

clearcompany

We provide reliable and fast internet to tens of millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Production Test Technician Starlink

As a Tesla Maintenance Technician, you will ensure the optimal operation of manufacturing equipment through advanced troubleshooting and repair of electrical systems, PLCs, hydraulics, mechanical systems, robotics, and conveyors. Advanced skills in troubleshooting and repairing electrical systems and PLCs, with a thorough understanding of circuit schematics and fault analysis.

Tesla Inc

Equipment Technician, Model Y, Production Control

Run functional and performance tests using optical power meters, optical spectrum analyzers (OSAs), and bit error rate testers (BERT). Roboptic is a Taiwanese-founded robotics and optical systems company building a new greenfield manufacturing facility in Hutto, TX to produce high-speed optical transceivers.

HR on Demand

Photonics Production Test Technician (Optical Transceivers)

100hires

BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact - for our customers and the communities we serve.

YEAR

BAE Systems Plc

Production Quality Technician

We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Production Test Technician (Starlink)

We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world's largest satellite constellation and most advanced broadband internet system.

Prepares and maintains accurate records in accordance with all safety, quality, regulatory and production requirements, such as plant readings, plant maintenance, instrument calibrations, etc Identifies potential problems from collected data Performs complex plant functions, including DERIME and warm plant start-ups. Performs administrative functions, i.e. requisitioning, purchasing, production accounting, and payroll record-keeping (closure of POs and receiving / time inputting) Safety and Regulatory Compliance Requires 100% compliance with all Airgas safety policy and procedures, and cGMP (current Good Manufacturing Practices) training and techniques to prevent lost time or serious injury to others.

Select Source International

AGAS Production Technician ASU (USA)

Provide frontline and escalated support for manufacturing systems and operational technology, including Zebra printers (ZPL configuration and troubleshooting), barcode scanners, production-floor workstations and displays, shop-floor networking, and connected IoT devices. You will be a key IT partner to manufacturing, and operations teams, supporting day-to-day production activities while driving continuous improvement in systems, processes, and uptime.

Saronic

IT Production Support Technician

Saronic Technologies Inc

Saronic Technologies

sourcestack_via_bold

Perform the selection of specialized test equipment, set-up, calibration, Helium leak testing and mechanical assemblies. Knowledge on Transducer, Mass Flow Controller, Regulators and Pneumatic valves components.

Ichor Systems, Inc.

Production Test Technician

Curtiss Wright Round Rock is a global engineering and design manufacture leader with just over six decades of experience designing for heavily regulated markets, such as nuclear, aerospace, oil and gas, and more. You will apply broad manufacturing knowledge to complex or non-routine production assignments of parts, components, subassemblies, and final assemblies.

<p>In 2014, we transitioned to a new segment structure under the "One Curtiss-Wright" vision, realigning our business to an integrated, market-facing global diversified industrial company. The result is a more strategically aligned Curtiss-Wright that is now comprised of Commercial/Industrial, Defense and Power segments. We continually focus on maintaining solid relationships with our customers, building on our competitive positions and creating market leadership through our technology investment. In this new structure, we will better utilize our scale while also providing for enhanced customer interaction. These strategies will continue to support our growth and generate margin expansion opportunities. </p>

Curtiss-Wright Corp

Manufacturing Technician, Staff

Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. As we are a start-up the expectation is that we all wear many hats, and at times you may be asked to assist in additional duties such as performing cycle counts of inventory, assisting in shipping and receiving functions, or other tasks.

CesiumAstro Inc

Manufacturing Technician III

Our teams work across RF, embedded systems, electronics, mechanical engineering, software, manufacturing, and supply chain to turn some of the industry's most demanding engineering challenges into reliable, production-ready solutions — combining the agility of a startup with the ambition to compete at the leading edge of UAS and autonomous systems. We're launching our U.S. operations from the ground up — building a next-generation, vertically integrated aerospace organization focused on advanced uncrewed aircraft systems (UAS), autonomy, and sensing technologies for the U.S. market and strategic partners.

Production Technician Jobs in Bastrop, TX

Production Technician, Gateways Starlink Space Exploration Technologies Corp

Production Technician, Gateways (Starlink) SpaceX

Production Technician, Gateways (Starlink) Space Exploration Technologies

Production Technician X-Bow Launch Systems Inc

Large Format Production Technician AlphaGraphics - US371

Production Print Technician Pacific Office Automation

Production Test Technician Starlink Space Exploration Technologies Corp

Equipment Technician, Model Y, Production Control Tesla Inc

Photonics Production Test Technician (Optical Transceivers) HR on Demand

Production Quality Technician BAE Systems Plc

Production Test Technician (Starlink) SpaceX

Production Test Technician (Starlink) Space Exploration Technologies

AGAS Production Technician ASU (USA) Select Source International

IT Production Support Technician Saronic

IT Production Support Technician Saronic Technologies Inc

IT Production Support Technician Saronic Technologies

Production Test Technician Ichor Systems, Inc.

Manufacturing Technician, Staff Curtiss-Wright Corp

Manufacturing Technician III CesiumAstro Inc

Lead Manufacturing Technician KRUSH Tech Inc

Similar Job Searches

See More Jobs

Stand out to leading employers.