April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Wheat Ridge, CO13 days ago
Employee pay is based on factors like relevant education, qualifications, certifications, experience, skills, seniority, location, performance, union contract and business needs. By clicking “Apply Today” you agree to receive calls, AI-generated calls, text messages or emails from Kforce and its affiliates, and service providers.
p>The Formwork Engineer supports projects by preparing structural formwork calculations, drafting detailed structural concrete and formwork drawings and coordinating closely with project teams to ensure design accuracy, safety, and cost efficiency. Prepare concrete structure and formwork drawings by incorporating information from project drawings, bulletins, sketches, RFIs, and other trade shop drawings, and coordinate submittals with customers.
Greenwood Village, CO14 days ago
The ideal candidate has deep experience building scalable microservices using TypeScript/Node.js, along with strong AWS expertise-particularly serverless architecture and containerized deployments. Kforce is immediately seeking an experienced Integrated Billing Systems Software Engineer in support of our enterprise telecommunications and mass media client based in Greenwood Village, CO.
The ideal candidate brings strong full stack expertise, experience modernizing legacy systems, and the ability to collaborate across engineering, product, and infrastructure teams. Employee pay is based on factors like relevant education, qualifications, certifications, experience, skills, seniority, location, performance, union contract and business needs.
p>The Project Engineer supports the planning, design, and execution of construction projects by drafting detailed structural concrete and formwork drawings and coordinating closely with project teams to ensure design accuracy, safety, and cost efficiency. Prepare concrete structure and formwork drawings by incorporating information from project drawings, bulletins, sketches, RFIs, and other trade shop drawings, and coordinate submittals with customers.
Since 2010, SynergisticIT has helped thousands of candidates land full-time jobs at tech leaders and enterprise employers—companies such as Google, Apple, PayPal, Visa, Western Union, Wells Fargo, Intel, Walmart Labs, Citi, JPMC, Bank of America, Deloitte, and many more—with offers often ranging from $95,000 to $154,000 depending on role and skill depth. Instead of chasing every shiny trend, JOPP focuses on roles employers repeatedly hire for: Java full stack, software programming, Python/Java development, DevOps, data analyst, data engineer, data scientist, and ML/AI engineer.
p>This entry level position ensures compliance with applicable U.S. export and import control laws, including the Export Administration Regulations (“EAR”), International Traffic in Arms Regulation (“ITAR"), and the Office of Foreign Asset and Control (“OFAC”) sanctions, and regional and local regulations concerning the movement of goods and services across borders. Using their engineering knowledge, skills and abilities, a Trade Compliance Engineer and Analyst to review part specification sheets, related product documentation, and the Export Administration Regulations to determine Export Classification Code Numbers (“ECCN”) and or local country export classifications for items sold.
Englewood, CO30+ days ago
Minimum 3 years’ experience with Video Conferencing/AV integration design, engineering, installation and support, Experience with A/V Platforms: QSC / Qsys environment, Crestron, Extron, Shure, Sennheiser, Mackie, Dante, Running Live Sound, ETC Lighting, DMX, Global Cache, Video Wall processors / RGB Spectrum, IP Cameras Platforms. You will be responsible for all aspects surrounding the engineering, configuration, installation, maintenance, training, and upgrade of our Global IP-Video Tandberg/Cisco and Web based (Zoom) infrastructure (Operating in 16 different Countries).
Englewood, CO30+ days ago
This compensation range is specific to the State of Colorado and takes into account various factors that are considered in making compensation decisions, including but not limited to the candidates relevant experience, qualifications, skills, competencies, and proficiency for the role. While performing the duties of this job, the employee is frequently required to sit; use hands and fingers to work with objects, tools, or controls; and use office equipment including computers, telephones, and/or copiers/scanners.
p>Responsibilities: • Provide application support for product and program implementation and maintenance • Support launch of new Lines of Business leveraging policy admin platforms such as MGA Systems, Federato, Guidewire, etc., using configurations for rate, form and rules • Interact with vendors and other development teams to coordinate custom development, report building and general application support for policy & claim operations • Interact with underwriting teams to understand their products and system requirements to manage those products • Define, document and maintain business process workflows with respect to system interaction • Debug issues identified by business users in Live or Test environments by debugging root cause and defining solution plans • Liaise with Operations, Legal, Data and other teams to coordinate efforts and ensure smooth product launches • Utilize best practices and stay up to date on technology and industry trends.
Requirements:
• A minimum of 3 years of experience in configuring and supporting IMS or similar systems for underwriting services and transactions is required • Bachelor's degree • P&C / Specialty Insurance industry experience a plus • Agile experience required • Visio and workflow design skills is a plus • Strong communication skills - verbal, written and presentation.
MCG builds FHIR-based clinical decision support products that power prior authorization workflows for payers and providers across the US - including the Path product line (CRD, DTR, PAS, AutoAuth), among other core products. What we need is an engineer who can take a problem from "we should look at this" to a shipped, measured outcome, talking to users, designing the experience, building it, instrumenting it, and iterating, without waiting for a fully defined spec.
p>This is an exciting job opportunity for you as Product Development Engineer on our Connected Buildings, Architectural Products Group team in Aurora, CO, with Cooper Lighting Solutions, a business unit of Signify, the world leader in lighting. End to end development of luminaires in the Architectural Products Group from preliminary concept through implementation into manufacturing including product design, part development, component procurement, and hands on assembly of prototypes for high complexity linear luminaires.
This position supports Product initiatives across Mobility and Powersports products and systems, including development of enabling materials, components, and manufacturing methods that can ultimately become commercial products. The Technical Product Engineer will work cross-functionally with internal teams and external suppliers to evaluate, prototype, test, and validate new concepts, materials, components, and manufacturing processes.
Englewood, CO30+ days ago
This position supports product initiatives across Mobility and Bicycle products and systems, including the development of enabling materials, components, and manufacturing methods that can ultimately become commercial cycling products. The Technical Product Engineer will work cross-functionally with internal teams and external suppliers to evaluate, prototype, test, and validate new concepts, materials, components, and manufacturing processes.
li>Collaborate with Development, Product Management, Design, VF Asia Development & Sourcing, Materials, and vendors to establish technical engineering best practices for our various product types, technologies, lasts, fit, foams, and compounds of our products. Additionally, while formal education in a related field is beneficial, we are primarily interested in candidates with 5+ years of experience in Footwear Product Engineering and Development within the footwear industry, preferably in performance athletic footwear.
Boulder, Colorado30+ days ago
Greenwood Village, Colorado30+ days ago
div>Work Flexibility: OnsiteStryker is hiring a Staff Product Engineer, in Greenwood Village, CO to lead sustaining engineering efforts across our Sports Medicine product portfolio. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.
ul>Work Cross functionally with design team, product team, and factories to design styles and create and update tech packs and systems with all necessary info about the products being developed. Our shared passion for golf and ski drives us to create incredible products that empower our loyal customers to fully enjoy their passions.
Littleton, CO30+ days ago
p>As a Senior Product Development Engineer, you will collaborate with cross-functional project teams and contribute to innovation across the full product development cycle: - "Deliver Extraordinary": Work directly with customers and surgeons to gather stakeholder input, translate clinical needs into design requirements, and provide our partners with the best service and solutions. In this role, you will design cutting-edge medical devices utilizing state-of-the-art additive manufacturing processes, develop optimized end-to-end workflows and work instructions, and collaborate with multidisciplinary teams including surgeons and clinical partners to deliver products that meet technical, regulatory, and quality requirements on time and within budget.
Englewood, CO30+ days ago
This compensation range is specific to the State of Colorado and takes into account various factors that are considered in making compensation decisions, including but not limited to the candidates relevant experience, qualifications, skills, competencies, and proficiency for the role. This includes optimizing designs for performance, cost, and manufacturability while collaborating with cross-functional global teams to support the success of the product line.
p>Key activities you will accomplish in this role: - Experience with full avionics product life cycle - Knowledge of the definition, interpretation, and implementation of design requirements, coordination and execution of hardware designs, development and integration of hardware for both custom and procured electronic assemblies in accordance with all Lockheed Martin Space engineering process specifications.
Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115.
Required Qualifications: • Bachelor's degree in Engineering and 5+ years of industry experience in new product introduction (NPI), engineering design, manufacturing engineering, and/or test engineering • Knowledge of PCB and PCBA manufacturing processes, procedures, and best practices • Understanding of electronic circuits, including: analog, RF, and digital circuitry • Experience working across full product life cycle from prototype and mass production to end of life • Experience with hardware bill of materials (BOMs), process documentation, and assembly and test processes • US Citizenship Required - ITAR Site. • Lead new product introduction (NPI) process, supporting design teams from concept development through the release to production (RTP) • Provide daily technical support to the manufacturing line to troubleshoot product issues • Apply design for x (DFX) principles in support of new product development, and sustainment of released products • Perform failure analysis to identify root cause and drive improvements through sustaining engineering • Support products through the full product lifecycle, including requirements definition, design, development, test, and sustainment.
Denver, Colorado30+ days ago
As the Product Engineer II – Utilities, you will collaborate with customers, industry teams, and other product development team members to design, develop, and support the right geospatial solutions for electric, gas, water, sewer, stormwater and telecommunications agencies. Design and author test cases for functionality, performance, scalability, and durability; execute both manual and automated tests, analyze test results, and report results.
By providing your phone number, you consent to: (1) receive automated text messages and calls from the Judge Group, Inc. and its affiliates (collectively "Judge") to such phone number regarding job opportunities, your job application, and for other related purposes. This role focuses on optimizing product performance, cost, and manufacturability while collaborating with global cross-functional teams to support product line success.
Leveraging established playbooks for domain modeling, detailed design and specification, and continuous delivery, you will help teams navigate ambiguity and turn complex problems into clear, actionable solutions. The Work We're doing this by working with leaders in the industry, across Accenture teams, and technology partnerships to help clients re-invent themselves and re-imagine their services as products.
p>The Senior Product Engineer will execute administrative, engineering/technical, supply chain & sales functions in support of the goals established for the Satellite facilitys manufacture of high-quality power distribution products. Maintain good working relationships with customers, distributors, supply chain, Eaton sales personnel and internal plant personnel in support of a quality customer service effort.
This role will lead solution-focused "tiger teams" to resolve complex production, design, integration, and performance issues, with a strong emphasis on products used in secure government and mission-focused environments. The Lead Product Engineer II will serve as a senior technical contributor and problem-solving lead, working across engineering, manufacturing, operations, leadership, and customer-facing teams.
If you are applying to perform work for Medtronic, Inc. ("Medtronic") in any position which will involve performing at least two (2) hours of work on average each week within the unincorporated areas of Los Angeles County, you can find here a list of all material job duties of the specific job position which Medtronic reasonably believes that criminal history may have a direct, adverse and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. The following benefits and additional compensation are available to those regular employees who work 20+ hours per week: Health, Dental and vision insurance, Health Savings Account, Healthcare Flexible Spending Account, Life insurance, Long-term disability leave, Dependent daycare spending account, Tuition assistance/reimbursement, and Simple Steps (global well-being program).
Englewood, CO30+ days ago
How You'll Create Impact Produce deliverables in support product development efforts from ideation to commercialization through entire product life cycle and on a given timeline, as directed by senior engineering staff, including: Research and evaluate competitive product for performance characteristics Conceptualization of new design ideas with some understanding of the inadequacy of existing designs Parametric modeling and detail design of P28 implant and instrument development Work within the P28 product development procedure to create design control documentation for P28 design history files and technical files. Participate in development of testing protocols and assist in the testing process for new and existing products Compile and comprehend test results and implement/recommend appropriate design changes Participate in activities related to project phase gate design reviews Interface with 3rd party suppliers, contractors, testing houses, etc.
Englewood, CO30+ days ago
ul>Produce deliverables in a product development leading role from ideation to commercialization through entire product life cycle and on a given timeline, as directed by senior engineering staff, including:
Research and evaluate competitive product for performance characteristics. To support our talented team, we focus on development opportunities, robust employee resource groups (ERGs), a flexible working environment, location specific competitive total rewards, wellness incentives and a culture of recognition and performance awards.
Louisville, CO30+ days ago
As the Product Engineer II Utilities, you will collaborate with customers, industry teams, and other product development team members to design, develop, and support the right geospatial solutions for electric, gas, water, sewer, stormwater and telecommunications agencies. Design and author test cases for functionality, performance, scalability, and durability; execute both manual and automated tests, analyze test results, and report results.
Littleton, CO30+ days ago
As an Electronics Responsible Product Engineer you will lead and coordinate technical design changes, own component production, delivery, and all aspects of engineering closeouts (Discrepancy Reports; End-Item Data Packages, Material Review Board, Failure Review Board, etc.) and coordinate with suppliers as required. Key activities you will accomplish in this role: • Support system test and ATLO to resolve test anomalies with associated troubleshooting • Support generation, review and presentation of Product Certification • Manage risk and identify mitigation plans to meet productivity, quality, cost, schedule, and mission success objectives.
The Product Engineer II will play a key role in building and evolving the platform that powers integrations with domain providers, helping make onboarding more consistent, scalable, and easier to extend over time. Team members are also covered by company-paid life and disability insurance and have the option of participating in employee-paid supplemental life, accidental death and dismemberment, critical illness, and accident insurance.
p>'',''USA-CO-Littleton'','''','''','''',''80127'',''Individual Contributor'',''Individual Contributor'',''Yes, 10 % of the Time'',''Yes, 10 % of the Time'',''Employee'',''Employee'',''Jun 11, 2026, 5:20:34 PM'',''Jun 11, 2026, 5:20:34 PM'',''false'',''169955'',''169955'',''true'',''169955'',''false'',''Submission for the position: Senior Product Development Quality Engineer - (Job Number: 2600004J)'',''false'',''169955'',''false'',''true''. Apply strong GD&T expertise (ASME Y14.5) to interpret engineering drawings and product manufacturing information (PMI), identify critical-to-quality (CTQ) characteristics, and establish inspection methods, plans, and acceptance criteria based on those GD&T CTQs.
Louisville, CO22 days ago
We are a diverse and growing team working in brand-new facilities in downtown Seattle, Washington and Louisville, Colorado, and we are looking for innovative thinkers who are excited by groundbreaking science and technology, and passionate about squaring up to the challenges inherent to cutting-edge drug development. This role will lead the development, scale-up, and tech transfer of lentiviral vector drug product and drug substance processes from lab to GMP scale (250 mL to 200 L), applying Quality by Design (QbD) principles, and supporting transitions through multiple clinical stages.
Englewood, CO30+ days ago
This role will work at the intersection of engineering, data, and digital technology, partnering with product development teams and GPLM to improve design efficiency, predictive performance modeling, materials optimization, testing automation, and lifecycle management for Gates' power transmission and fluid power products. Gates Corporation is seeking a Product Development AI Engineer to accelerate innovation across our global product portfolio by applying artificial intelligence, machine learning, and advanced analytics to engineering and product development processes.
Littleton, CO30+ days ago
p>Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $118,700 - $209,300. Description:Please join us as a Responsible Product Engineer Delegate, where you will co-lead the development, production and certification of the Detonation End Point (DEP) on the Next Generation Interceptor (NGI) program.
Littleton, CO30+ days ago
p>The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115. • Participate in engineering reviews, Engineering Material Review Board (EMRB) hardware discrepancy decisions, and Failure Review Board (FRB) as required.
p>Key Results Areas: Resolve technical challenges related to manufacturing, assembly, testing, and field support for defense, space, cryogenic, and advanced energy products:
Collaborate with program managers, machine operators, design engineers, manufacturing engineers, quality engineers, and technicians to troubleshoot and resolve complex technical deviations.
ITAR Requirements: To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Barber-Nichols must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e., current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Working under the direction of the Lead Product Engineer and senior engineering staff, this junior-level role is ideal for an early-career engineer with experience or developing interest in manufacturing, product design, electrical engineering, and/or RF engineering. This role contributes to engineering and production efforts by gathering technical information, reviewing drawings and requirements, supporting root cause analysis, and translating customer-driven needs into practical engineering inputs.
Every Switch team member contributes to a mission greater than themselves: to create the worlds most advanced digital infrastructure that powers the progress of humanity. Serve as technical authority for medium- and low-voltage systems, including UPS, switchgear, generators, grounding, and protection schemes.
Littleton, CO30+ days ago
p>Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.