NewQuality Inspector Kimco StaffingQuality InspectorEl Monte, CA$25–$29 / hourMinimum of 2 years’ inspection experience with a technical certificate or 5 years’ experience with a high school diploma. This hands-on role offers an exciting opportunity to contribute to a production environment where your expertise makes a real difference.
Quality Inspector AxelonQuality InspectorIrvine, CA$29 / hourUnderstand acceptance test procedures (ATP), acceptance test reports (ATR), job travelers, pick lists, drawings, procedures, C of Cs, chemical & physical analysis reports, and test reports. Inspect aerospace component parts, sub-assemblies, and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications, and supplier/customer requirements.
Fire Alarm Inspector Sciens Building Solutions, LLCFire Alarm InspectorEl Cajon, CA$26–$34 / hourBe physically fit to perform the demanding work of the trade, including frequent lifting of up to 25 pounds, maximum occasional lifting up to 50 pounds; able to work from heights and climb ladders; standing and walking for most of the workday. Be physically fit to perform the demanding work of the trade, including frequent lifting of up to 25 pounds, maximum occasional lifting up to 50 pounds; able to work from heights and climb ladders; standing and walking for most of the workday.
Quality Inspector 1st Shift Eaton Corporation PlcQuality Inspector 1st ShiftIrvine, CAPossesses in-depth knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, drawings, procedures, C of Cs, chemical & physical analysis reports, and test reports. In this function you will: Inspects (receiving, in-process and final) aerospace component parts, sub-assemblies and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
Quality Inspector II - 2nd Shift Eaton Corporation PlcQuality Inspector II - 2nd ShiftIrvine, CAPossesses in-depth knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, drawings, procedures, C of Cs, chemical & physical analysis reports, and test reports. Inspects (receiving, in-process and outbound) aerospace component parts, sub-assemblies and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
Vegetation Management Inspector (VMI) Crafted StaffVegetation Management Inspector (VMI)Santa Rosa, CA$42.78–$52.87If you have field experience around utility ROW, line clearance operations, forestry/outdoor field work, or inspection/patrol-style work—and you want a role that's more about observation, documentation, and coordination than heavy physical labor—this role is a strong fit. We're hiring Vegetation Management Inspectors (VMI) to patrol utility right-of-way (ROW) areas and identify hazardous vegetation (trees/brush) along utility lines.
Inspector A Eaton Corporation PlcInspector ALos Angeles, CA$30.54–$45.82 / hourInspection involves using precision measurement equipment such as, but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, thread gages, surface plates, spring tester, optical comparator, surface plate, and CMM. In this function you will: Inspects (Incoming and/or in-process) highly complex; closed tolerance aerospace precision machined components and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
Manufacturing Part Inspector III- 1st Shift Eaton Corporation PlcManufacturing Part Inspector III- 1st ShiftCamarillo, CA$29–$36 / hourInspection involves using precision measurement equipment such as, but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, thread gages, surface plates, spring tester, optical comparator, surface plate, and CMM. Inspects (Incoming and/or in-process) are highly complex; closed tolerance aerospace precision machined components and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
Inspector III 2nd shift Eaton Corporation PlcInspector III 2nd shiftCamarillo, CA$23–$26 / hourInspection involves using precision measurement equipment such as, but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, thread gages, surface plates, spring tester, optical comparator, surface plate, and CMM. Inspects (Incoming and/or in-process) are highly complex; closed tolerance aerospace precision machined components and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
NewCMM Quality Inspector- 2nd Shift Eaton Corporation PlcCMM Quality Inspector- 2nd ShiftIrvine, CAResponsible for performing receiving, in-process, first article, and final dimensional and visual inspections of component parts, assemblies, and sub-assemblies using Coordinate Measuring Machine (CMM) equipment and conventional inspection tools to verify conformance to engineering drawings, customer specifications, regulatory requirements, and internal quality procedures. In this function you will: Inspect (receiving, in-process and final) aerospace component parts, sub-assemblies and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
Railroad Track Inspector RAILPROS IncRailroad Track InspectorCalifornia, CADriven by a passion for our people, clients, and communities, we are committed to solving our customers' challenges and earning their trust through teamwork, continuous improvement, and service excellence. An Innovative, Industry Leading Environment (Innovation): Our Innovation pillar fuels creative problem solving, modern technology adoption, and breakthrough thinking that positions RailPros as a leader in the rail and transit space.
Ultrasonic Inspector Level 2 L3Harris Technologies IncUltrasonic Inspector Level 2Canoga Park, CA$33.14–$57.32 / hourThe Ultrasonic Inspector Level 2 is responsible for inspecting ferrous and nonferrous raw stock details, brazed assemblies machined parts, diffusion bonded parts and assemblies for defects and compliance with fracture control requirements, engineering drawings, customer acceptance criteria or other critical established requirements using ultrasonic inspection equipment and processes. Set up and operate immersion and contact ultrasonic equipment for inspection of machined and detail parts, assemblies, weldments and materials, including those having high stress, temperature or pressure limits to exacting tolerances where accessibility requires the use of special probes and variations in surfaces, thickness or materials result in critical acoustical interference.
Quality Inspector 1St Shift Eaton CorporationQuality Inspector 1St ShiftIrvine, CAPossesses in-depth knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, drawings, procedures, C of Cs, chemical & physical analysis reports, and test reports. In this function you will: Inspects (receiving, in-process and final) aerospace component parts, sub-assemblies and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
CMM Inspector III 2Nd Shift Eaton CorporationCMM Inspector III 2Nd ShiftCamarillo, CA$23–$26 / hourInspection involves using precision measurement equipment such as, but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, thread gages, surface plates, spring tester, optical comparator, surface plate, and CMM. Inspects (Incoming and/or in-process) are highly complex; closed tolerance aerospace precision machined components and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
NewCMM Inspector Iii- 1St Shift Eaton CorporationCMM Inspector Iii- 1St ShiftCamarillo, CA$29–$36 / hourInspection involves using precision measurement equipment such as, but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, thread gages, surface plates, spring tester, optical comparator, surface plate, and CMM. Inspects (Incoming and/or in-process) are highly complex; closed tolerance aerospace precision machined components and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
NewQuality Inspector 1st Shift Eaton AerospaceQuality Inspector 1st ShiftIrvine, CAPossesses in-depth knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, drawings, procedures, C of Cs, chemical & physical analysis reports, and test reports. Inspects (receiving, in-process and final) aerospace component parts, sub-assemblies and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
NewCMM Quality Inspector- 2Nd Shift Eaton CorporationCMM Quality Inspector- 2Nd ShiftIrvine, CAResponsible for performing receiving, in-process, first article, and final dimensional and visual inspections of component parts, assemblies, and sub-assemblies using Coordinate Measuring Machine (CMM) equipment and conventional inspection tools to verify conformance to engineering drawings, customer specifications, regulatory requirements, and internal quality procedures. In this function you will: Inspect (receiving, in-process and final) aerospace component parts, sub-assemblies and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
Quality Control Inspector- Soft Goods Manufacturing | $20.00 hourly!| 839940 HelpmatesQuality Control Inspector- Soft Goods Manufacturing | $20.00 hourly!| 839940Irvine, CACross-Functional Collaboration: Partner with production teams to flag defects early, assist with root-cause analysis, recommend corrective actions, and support continuous improvement (Lean/Six Sigma) initiatives. In this critical role, you will perform technical inspections on high-precision soft goods used in lifesaving parachutes and related aerospace devices.
Specialty Combination Inspector (Continuous) City of Oakland, CaliforniaSpecialty Combination Inspector (Continuous)Oakland, CA$109,262.40–$134,139.20 / yearFor positions in this classification requiring selective certification of bilingual language skills, names of eligible candidates certified to the hiring authority shall be the highest ranking candidates willing to accept employment and who possess the additional and special qualifications required (in accordance with Civil Service Rules, Section 5.03, Selective Certification). Application SubmittedWritten Exam Sent to Qualified CandidatesApril 6, 2026 - May 31, 2026Week of June 8, 2026June 1, 2026 - July 31, 2026Week of August 10, 2026August 1, 2026 - September 30, 2026Week of October 12, 2026October 1, 2026 - November 30, 2026Week of December 7, 2026.
Senior QA Inspector Atrium Staffing LLCSenior QA InspectorSan Diego, CA$60,000–$70,000 / yearClient Overview: Our client is a medical device manufacturer committed to developing reliable, safe, and effective solutions that support clinicians and enhance patient care. This role also provides day-to-day coordination, guidance, and coaching to a team of QA Inspectors while supporting broader quality operations and documentation activities.
Quality Inspector Johnson Service GroupQuality InspectorMoorpark, CAJohnson Service Group (JSG), a nationally recognized, award-winning staffing firm, is partnering with a confidential, high-precision Electronics Manufacturing company in Moorpark, CA to hire a QC Inspector. If you have electronics inspection experience and are looking for a long-term opportunity in a highly respected manufacturing environment, we encourage you to apply through Johnson Service Group today.
US-Irvine-Quality Inspector GTTUS-Irvine-Quality InspectorIrvine, CAPossesses in-depth knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, drawings, procedures, C of Cs, chemical & physical analysis reports, and test reports. Inspects (receiving, in-process and outbound) aerospace component parts, sub-assemblies and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
Incoming Quality Inspector 2:00pm - 10:30pm Atomic Machines IncIncoming Quality Inspector 2:00pm - 10:30pmEmeryville, CA$39–$45 / hourFurthermore, this digital platform is fully programmable in the way 3D printing is digital-but whereas 3D printing produces parts of a single material using a single process, the Matter Compiler technology platform is a multi-process, multi-material system: bits and raw materials go in, and complete, functional micromachines come out. This platform enables new classes of micromachines to be designed and built by providing manufacturing processes and a materials library that are inaccessible to semiconductor manufacturing methods.
Quality Inspector I (25462) Natel Engineering Company IncQuality Inspector I (25462)Carlsbad, CAYour responsibilities will include: Performing in-process inspections on products moving through the work cell, especially SMT, Wave Soldering, and Selective Soldering operations. If you have strong attention to detail, enjoy hands-on work with electronic assemblies, and take pride in helping a team produce high-quality products, we want to hear from you.
Final Quality Control Inspector Trelleborg Sealing SolutionsFinal Quality Control InspectorPaso Robles, CaliforniaDesire to delight both customers and coworkers by offering encouragement, fostering teamwork and addressing conflict appropriately. Collaborates and gathers documentation or data, tests product or materials for root cause analysis, investigations, and drives continuous improvement activities.
Associate Agricultural/Weights And Measures Inspector Vets HiredAssociate Agricultural/Weights And Measures InspectorLos Angeles, CaliforniaOption II: Bachelors degree in any discipline with at least 30 semester units (or equivalent) in agricultural science, biological science, chemical science, physical science, mathematics, or statistics, and one year of experience performing agricultural or weights and measures inspections for a public agency. The Associate Agricultural/Weights and Measures Inspector participates in a structured training program designed to build proficiency in agricultural inspection and weights and measures enforcement.
Quality Inspector I Crane Aerospace & ElectronicsQuality Inspector IAuburn, CA$20.96–$25.82 / hourBeyond an associate’s base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement — as well as performance-based bonus programs for certain positions. + Skills/Abilities: Effective verbal and written communication skills; Competence to perform inspections using calipers, thread gages, scales, micro-hite; General PC skills, including Word, Excel and Oracle.
ASSOCIATE AGRICULTURAL/WEIGHTS AND MEASURES INSPECTOR Los Angeles CountyASSOCIATE AGRICULTURAL/WEIGHTS AND MEASURES INSPECTORLos Angeles County, CAVeteran's Credit: Pursuant to the County Charter and County policy, in all open competitive examinations (i.e., examinations open to everyone), the County of Los Angeles will add a credit of 10 percent of the total credits specified for such examination to the final passing score of an honorably discharged veteran, as well as the spouse of a deceased or disabled veteran, who served in the Armed Forces of the United States under specific conditions. Please add examsunit@acwm.lacounty.gov, noreply@governmentjobs.com, and info@governmentjobs.com, as well as the domains acwm.lacounty.gov and hr.lacounty.gov, to your email address and list of approved senders to prevent email notifications from being filtered as spam/junk/clutter mail.
AGRICULTURAL/WEIGHTS & MEASURES INSPECTOR II Los Angeles CountyAGRICULTURAL/WEIGHTS & MEASURES INSPECTOR IILos Angeles, CA$66,236.88–$89,262.72 / yearOPTION I: A Bachelors degree from an accredited college or university with specialization in one or more appropriate disciplines in agricultural science, biological science, chemical science, physical science, mathematics, and/or statistics -AND- Two (2) years of experience at the level of the Los Angeles County class of Agricultural/Weights and Measures Inspector I performing agricultural or weights and measures inspections for a public jurisdiction. Veteran's Credit: Pursuant to the County Charter and County policy, in all open competitive examinations (i.e., examinations open to everyone), the County of Los Angeles will add a credit of 10 percent of the total credits specified for such examination to the final passing score of an honorably discharged veteran, as well as the spouse of a deceased or disabled veteran, who served in the Armed Forces of the United States under specific conditions.
NewAGRICULTURAL/WEIGHTS & MEASURES INSPECTOR III Los Angeles CountyAGRICULTURAL/WEIGHTS & MEASURES INSPECTOR IIILos Angeles County, CA$73,828.32–$99,487.68 / yearConducts and coordinates complex investigations related to complaints, violations, and prosecution for criminal violations and civil actions (e.g., misuse of pesticides, short weight or measure, packaging and labeling fraud, price accuracy, fire and health hazards on improved or unimproved parcels, certified farmers market violations, and complaints from the public or other agencies) by gathering and preserving evidence, compiling and analyzing information, preparing technical case documentation, collaborating with regulatory and prosecutorial agencies, assisting in developing corrective action plans, and serving as an expert witness in judicial or administrative proceedings to achieve compliance and enforce agricultural and weights and measures laws and regulations. OPTION II: A Bachelors degree from an accredited college or university with specialization in any discipline with a minimum of 30 semester units, or equivalent, in one or any combination of the following disciplines: agricultural science, biological science, chemical science, physical science, mathematics, and/or statistics -AND- Four (4) years of experience at the level of the Los Angeles County class of Agricultural/Weights & Measures Inspector II performing agricultural OR weights and measures inspections for a public jurisdiction.
Inspector Kinetic Personnel Group, Inc.InspectorHuntington Beach, CAWe are hiring entry-level electronics inspectors for a long-established manufacturer that produces precision electronic parts. Perform basic functional tests using electronic test equipment.
Fit Up Inspector The Timken CoFit Up InspectorLos Alamitos, CA$24–$32 / hourPurpose: The Fit Up Inspector is a critical and demanding position, which job duties entail meeting quality and daily production demands, in addition to the final assembly of domestic and international bearings. Most importantly Fit Up Inspectors are accountable for producing conforming bearings by applying both Work Instructions and Engine Manual criteria to every bearing overhauled.
Quality Inspector II Dexter CareerQuality Inspector IITorrance, CaliforniaThe Quality Inspector 2 position is responsible for inspecting work during multiple phases of production and communicating and processing gaps in that quality according to our Quality Management System (QMS). Excellent problem solving skills: uses rigorous logic and methods to solve problems producing effective solutions to problem statements.
Senior Inspector - A&P General Dynamics CorpSenior Inspector - A&PVan Nuys, CA$48.39–$56.45 / hourGulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft. 8 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 2 years of relevant Gulfstream aircraft experience and 2 years of aircraft inspection experience.
Special Activity Permit Inspector City of Oakland, CaliforniaSpecial Activity Permit InspectorOakland, CA$89,193–$109,473 / yearPlease complete the Request for Reasonable Accommodation in Testing form by clicking on this link or by copying and pasting the link into your browser to open it: https://cao-94612.s3.amazonaws.com/documents/Request-for-Reasonable-Accommodation-in-Testing-2.9.22-Fillable.pdf ; Send the completed form and any supporting documentation to the exam analyst: Will Sun at wsun@oaklandca.gov. In the Economic & Workforce Development (EWD) Department, you will join the Special Activity Permits Division, a team performing inspections, investigations, and providing enforcement and education of regulations pertaining to special activity permits and operations of businesses, including but not limited to special events like cabarets, massage establishments, mobile food vending, and/or cannabis businesses.
Seasonal Quality Inspector - Daly City, CA See's Candy Shops IncSeasonal Quality Inspector - Daly City, CADaly City, CASee's will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of applicable local, state or federal law (including San Francisco Ordinance #131192 and Los Angeles Municipal Code 189.00). Job Description Summary: The Quality Inspector is responsible for ensuring the weight, appearance, and overall quality of confectionery products at various stages of the manufacturing, packing, and logistics processes.
Quality Inspector - South San Francisco, CA See's Candy Shops IncQuality Inspector - South San Francisco, CASouth San Francisco, CASee's will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of applicable local, state or federal law (including San Francisco Ordinance #131192 and Los Angeles Municipal Code 189.00). Job Description Summary: The Quality Inspector is responsible for ensuring the weight, appearance, and overall quality of confectionery products at various stages of the manufacturing, packing, and logistics processes.
NewQuality Control Inspector IMIA, LLCQuality Control InspectorSan Diego, CA$30–$38 / hourMonitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees.
NewNDT Inspector RimeProNDT InspectorBell, CAPerform non-destructive testing inspections using approved methods, including Magnetic Particle Testing (MT), Liquid Penetrant Testing (PT), Ultrasonic Testing (UT), Visual Testing (VT), and other applicable inspection methods based on certification level. The ideal candidate has experience performing multiple NDT methods, interpreting specifications, maintaining accurate inspection records, and working in a manufacturing environment where precision and quality are top priorities.
NDT Level III Inspector, Capabilities HadrianNDT Level III Inspector, CapabilitiesLos Angeles, CA$40–$60 / hourWe are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Assessor & Quality Assurance Inspector (Liheap) Pacific Asian Consortium in EmploymentAssessor & Quality Assurance Inspector (Liheap)Los Angeles, CA$32–$35 / hourJOB DUTIES: Under the guidance of the Field Operation Supervisor, the person hired shall perform the following duties: Residential Unit Energy Assessments: Drive and client's homes/apartments and complete building assessments/energy audits on clients' homes/apartments to determine feasibility or non- feasibility of weatherization including solar thermal/photovoltaic & heating/cooling services. Quality Assurance Inspections: Conduct inspection as per schedule of installed measures or services; review compliance of installed measure(s) per program policies and procedures, health and safety guidelines, WIS/TRM/REM manuals and other program updates, as applicable and eliminate and/or immediately report any hazardous conditions that pose immediate danger to customer or property at time of inspection.
Infrastructure Construction Inspector-Structures HNTB CorporationInfrastructure Construction Inspector-StructuresNorwalk, CA$126,950.84–$248,205.18 / yearIn addition to leading the design of the Sixth Street Viaduct, the K-Line Light Rail corridor, and the I-405 Sepulveda Pass Widening, we are the program and construction manager for the LACMTA I-105 ExpressLanes, the SBCTA I-10 Express Lanes, the OCTA I-405 Express Lanes, and the CHSRA Construction Package 4. This opportunity entails being responsible for senior proficiency level inspection or construction field work to monitor compliance with engineering/architectural plans and specifications. HNTB in Los Angeles has received many honors in recent years, including Employer of the Year by the Women's Transportation Seminar, Firm of the Year by the American Council of Engineering Companies, and Best Places to Work in Los Angeles by the Los Angeles Business Journal.
NDT Level II Inspector, Special Projects HadrianNDT Level II Inspector, Special ProjectsLos Angeles, CA$40–$54 / hourWe are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Fire Alarm Inspector Low Voltage FireFire Alarm InspectorVista, California$26–$34 / hourBe physically fit to perform the demanding work of the trade, including frequent lifting of up to 25 pounds, maximum occasional lifting up to 50 pounds; able to work from heights and climb ladders; standing and walking for most of the workday. This position will work closely with our sales team, field project teams, and clients to ensure our customers’ systems are inspected and maintained in a code-compliant manner.
NewConstruction Electrical Inspector HNTB CorporationConstruction Electrical InspectorNorwalk, CaliforniaThe Construction Field Specialist supervises the work of project staff to determine that contractor's construction activities are monitored and controlled in accordance with design specifications and contractual requirements. Core Job Duties: -Inspects new, existing, and modified electrical installations to ensure compliance with Caltrans and LA Metro specifications, and the California Manual on Uniform Traffic Control Devices (CAMUTCD).
Senior Inspector - A&P Gulfstream Aerospace CorporationSenior Inspector - A&PVan Nuys, CA$48.39–$56.45 / hourGulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the worlds most technologically-advanced business jet aircraft. 8 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 2 years of relevant Gulfstream aircraft experience and 2 years of aircraft inspection experience.
Quality Control Inspector ImiaQuality Control InspectorSan Diego, CaliforniaMonitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees.
Fire Alarm Inspector Sciens Building SolutionsFire Alarm InspectorEl Cajon, CA$26–$34 / hourBe physically fit to perform the demanding work of the trade, including frequent lifting of up to 25 pounds, maximum occasional lifting up to 50 pounds; able to work from heights and climb ladders; standing and walking for most of the workday. This position will work closely with our sales team, field project teams, and clients to ensure our customers' systems are inspected and maintained in a code-compliant manner.
Mechanical Inspector = Aerospace TechoundsllcMechanical Inspector = AerospaceBurbank, CaliforniaSkills/Abilities: Effective verbal and written communication skills; Competence to perform inspections using surface plates, calipers, thread gages, scales, micro-hite; General PC skills, including Word, Excel and Oracle; Ability to interpret drawings and part specifications; Accurate color vision and depth perception; Vision corrected to 20/20; Ability to work in a team oriented environment, including interfacing with Order Management, Internal Quality Engineers, Customers and other Internal Management personnel. Benefits: Health care, dental, vision, life and disability insurance starting the first day of the month Time Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.
Mechanical Inspector - Aerospace TechoundsllcMechanical Inspector - AerospaceBurbank, CaliforniaSkills/Abilities: Effective verbal and written communication skills; Competence to perform inspections using surface plates, calipers, thread gages, scales, micro-hite; General PC skills, including Word, Excel and Oracle; Ability to interpret drawings and part specifications; Accurate color vision and depth perception; Vision corrected to 20/20; Ability to work in a team oriented environment, including interfacing with Order Management, Internal Quality Engineers, Customers and other Internal Management personnel. Benefits: Health care, dental, vision, life and disability insurance starting the first day of the month Time Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.