Systems Engineer Associate (Secret Clearance) Lockheed Martin CorpSystems Engineer Associate (Secret Clearance)Huntsville, AL$60,200–$106,030 / yearModeling and analysis experience in aspects of the missile defense system (e.g., Aegis Weapons Systems, Ground-based Midcourse Defense (GMD), Glide Phase Intercept (GPI), Hypersonic and Ballistic Tracking Space Sensor (HBTSS), Fire Control, C2BMC, MDS sensors (EO/IR/RF), kill vehicles, interceptors, countermeasures, etc.). This position will perform some or all of the following duties, concentrating on early-phase (concept, requirements, and design) activities of the Systems-Engineering Development Lifecycle: 1.Lead the development of new system concepts by transforming stakeholder needs, acquired through documentation and solicitation, into easily reviewable technical approaches.
Systems Engineer Senior (Secret Clearance) Lockheed Martin CorpSystems Engineer Senior (Secret Clearance)Huntsville, AL$89,300–$157,550 / yearModeling and analysis experience in aspects of the missile defense system (e.g., Aegis Weapons Systems, Ground-based Midcourse Defense (GMD), Glide Phase Intercept (GPI), Hypersonic and Ballistic Tracking Space Sensor (HBTSS), Fire Control, C2BMC, MDS sensors (EO/IR/RF), kill vehicles, interceptors, countermeasures, etc.). Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $89,300 - $157,550.
Model Based Systems Engineer Staff (Secret Clearance) Lockheed Martin CorpModel Based Systems Engineer Staff (Secret Clearance)Huntsville, AL$109,200–$192,510 / yearModeling and analysis experience in aspects of the missile defense system (e.g., Aegis Weapons Systems, Ground-based Midcourse Defense (GMD), Glide Phase Intercept (GPI), Hypersonic and Ballistic Tracking Space Sensor (HBTSS), Fire Control, C2BMC, MDS sensors (EO/IR/RF), kill vehicles, interceptors, countermeasures, etc.). Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $109,200 - $192,510.
Systems Engineer (Secret Clearance) Lockheed Martin CorpSystems Engineer (Secret Clearance)Huntsville, AL$73,400–$129,260 / yearModeling and analysis experience in aspects of the missile defense system (e.g., Aegis Weapons Systems, Ground-based Midcourse Defense (GMD), Glide Phase Intercept (GPI), Hypersonic and Ballistic Tracking Space Sensor (HBTSS), Fire Control, C2BMC, MDS sensors (EO/IR/RF), kill vehicles, interceptors, countermeasures, etc.). Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $73,400 - $129,260.
DEW Systems Engineer Peraton IncDEW Systems EngineerHuntsville, AL$135,000–$216,000 / yearWe are seeking a highly specialized Directed Energy Weapon (DEW) Subject Matter Expert (SME) with deep expertise in laser, RF, and high-power microwave (HPM) modeling to directly support the MSIC DEW team. As the world's leading mission capability integrator and transformative enterprise IT provider, we deliver trusted, highly differentiated solutions and technologies to protect our nation and allies.
Hardware/Digital Engineer III - Kwajalein Atoll - 3867 Range Generation Next LLCHardware/Digital Engineer III - Kwajalein Atoll - 3867Huntsville, ALBenefits of Working at RGNext: Employees enjoy a robust benefit package on day one, which includes medical, dental, vision, disability and life insurances, generous Paid Time Off and holiday pay, a retirement savings plan with a company match and vesting on day one! Lead and support design and implementation of improvement and modernization (I&M) projects, including maintaining project schedules and budgets.
Mechanical Engineer III GTSMechanical Engineer IIIHuntsville, AlabamaGlobal Technical Systems (GTS) provides innovative, cost-effective, high-tech engineering products and product-based services encompassing latest generation software and hardware solutions and engineering services for defense, homeland security, and other critical Government interests. GTS products and services span a spectrum that includes: mission-critical combat systems processors; C4ISR; technology development including threat detection, biometric identification systems, and composite applications for munitions, armor and energy storage; avionics test systems; and lifecycle logistics support and repair.
Mechanical Engineer II GTSMechanical Engineer IIHuntsville, AlabamaMechanical Engineer II Huntsville, AL Global Technical Systems (GTS) provides innovative, cost-effective, high-tech engineering products and product-based services encompassing latest generation software and hardware solutions and engineering services for defense, homeland security, and other critical Government interests. GTS products and services span a spectrum that includes: mission-critical combat systems processors; C4ISR; technology development including threat detection, biometric identification systems, and composite applications for munitions, armor and energy storage; avionics test systems; and lifecycle logistics support and repair.
Sr. Network Engineer TCSSr. Network EngineerHuntsville, ALThese positions require US citizenship, an existing DoD clearance (Secret or higher), and on-site work at a facility in Huntsville, Alabama (telework is not available). Network Engineer to support the United States Army’s Integrated Air and Missile Defense [IAMD] Battle Command System (IBCS).
Safety Engineer TCSSafety EngineerHuntsville, ALSystem Safety Engineering experience conducting comprehensive system safety analyses IAW MIL-STD-882E, including Preliminary Hazard Analysis (PHA), Functional Hazard Analysis (FHA), System Hazard Analysis (SHA), and Operating & Support Hazard Analysis (O&SHA) to ensure compliance and mitigate operational risks. Systems Engineer Level 3: Bachelor’s Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline from an accredited university and 5 years of related work experience, or a Master's Degree in STEM and 3 years of related work experience, or a PhD.
Electrical Engineer - Level 2 Northrop Grumman CorpElectrical Engineer - Level 2Huntsville, AL$87,600–$131,400 / yearNorthrop Grumman Space Systems, Multi-Domain Operations, and Missile Defense Integration Business Unit (BU) has an exciting career opportunity for an Electrical Engineer Level 2 to join our team of qualified, diverse individuals. Experience in two or more of the following areas: electrical/power system design, network communication system design, cable harness fabrication design, and perform electrical load analysis.
MDA Systems Engineer | Systems Design and Requirements Capability General Dynamics Mission Systems, IncMDA Systems Engineer | Systems Design and Requirements CapabilityHuntsville, AL$100,219–$111,180 / yearModeling and analysis experience in aspects of the missile defense system (e.g., Aegis Weapons Systems, Ground-based Midcourse Defense (GMD), Glide Phase Intercept (GPI), Hypersonic and Ballistic Tracking Space Sensor (HBTSS), Fire Control, C2BMC, missile defense sensors (EO/IR/RF), kill vehicles, interceptors, countermeasures. Candidate should have prior experience with use of MSOSA (Cameo), DOORS and/or demonstrated knowledge in any of the MDA domain areas; including Aegis Weapon System, Ground-based Midcourse Defense (GMD), Glide Phase Intercept (GPI), Hypersonic and Ballistic Tracking Space Sensor (HBTSS), Fire Control, C2BMC, MDS sensors (EO/IR/RF).
Senior Reverse Engineer Radiance Technologies, Inc.Senior Reverse EngineerHuntsville, ALThis includes examining software for known and new vulnerabilities, reverse engineering software to understand the impact of vulnerabilities on the operation of the system, creating custom static and dynamic analysis tools for automated analysis, developing tools to analyze and inject datalink messages and other communication protocols, and documenting identified vulnerabilities and their impact in detail. This role will enable you to learn and gain experience in a wide array of engineering and computing disciplines with significant opportunities for deep-dive analytical thinking.
Senior Software Engineer EO Solutions CorpSenior Software EngineerHuntsville, ALThis position requires a versatile software engineer capable of working across the full software stack, from embedded controls and real-time hardware interfaces to operator interfaces and mission-level graphical user interfaces (GUIs). EO Solutions is seeking a highly skilled Senior Software Engineer to support the architecture, development, integration, and testing of advanced communication, controls, and safety software for complex High Energy Laser (HEL) weapon systems.
Lead Systems Engineer KODA Technologies Inc.Lead Systems EngineerHuntsville, ALFull timePrior experience with Tactical data links (TDL J, Link 11, Link 16) systems, encryption systems, precision timing systems (PNT), and DoD Risk Management Framework (RMF).Preferred Qualifications:Military experience with Air Defense Artillery, Theater High Altitude Area Defense (THAAD), and/or Common Data Link Interface-Module (CDLI-M).Ability to obtain and maintain Top Secret. In this role, you will provide coordinated communications integration support to the Kingdom of Saudi Arabia (KSA) Terminal High Altitude Area Defense (THAAD) Chief Engineer and United Arab Emirates (UAE) THAAD Engineering Lead.
NewSr. Software Engineer - Java Python Container Woodside Staffing SolutionsSr. Software Engineer - Java Python ContainerHuntsville, AL$132,000–$160,000 / yearThe ideal candidate will have extensive experience in software development, with a strong background in computer engineering or software engineering, and a proven ability to work collaboratively in a fast-paced environment. Required Skills, Education, and Capabilities Bachelor's degree in Computer Engineering, Software Engineering, or equivalent.
Defense Systems Radar Cross Section (RCS) Modeling Engineer/Analyst Delta Research IncDefense Systems Radar Cross Section (RCS) Modeling Engineer/AnalystHuntsville, AL$90,000–$150,000 / yearFull timePosition Description: We are seeking RCS analysts and engineers with the experience and expertise needed to develop high fidelity digital representations of foreign weapon systems. Experience with RCS modeling tools such as Xpatch and Method of Moments prediction tools such as SENTRi and SAF are desired.
NewAI Security Engineer DESE Research, Inc.AI Security EngineerHuntsville, ALFull timeRequired Qualifications:Bachelor's degree in Computer Science, Computer Engineering, Systems Engineering, Software Engineering, Data Science, Information Systems, Cybersecurity, or a related technical discipline.5 years of experience in security assurance, risk management, AI/ML governance, or related field. Job Details:The candidate will work as part of a small team in conducting research, developing and executing assurance methodologies, and identifying areas of risk, threats, and vulnerabilities associated with AI systems, pipelines, and components.
Sentinel - Payload Re-entry System (PRS) Systems Engineer 2/3 Northrop Grumman CorpSentinel - Payload Re-entry System (PRS) Systems Engineer 2/3Huntsville, AL$87,600–$131,400 / yearNorthrop Grumman supports the Air Force's sustainment, development, production and deployment of hardware and system modifications for Intercontinental Ballistic Missile (ICBM) Ground and Airborne Launch Control Systems, Launch Facilities, and associated infrastructure. Northrop Grumman Defense has an opening for a Systems Engineer (level 2)/Principal Systems Engineer (level 3) to join its Payload Re-entry System (PRS) team in Huntsville, AL in support of the Sentinel Program.
Sentinel - Principal/Sr. Principal Systems Engineer - 18439* Northrop Grumman CorpSentinel - Principal/Sr. Principal Systems Engineer - 18439*Huntsville, AL$98,400–$163,200 / yearNorthrop Grumman supports the Air Force's sustainment, development, production and deployment of hardware and system modifications for Intercontinental Ballistic Missile (ICBM) Ground and Airborne Launch Control Systems, Launch Facilities, and associated infrastructure. 2+ years of experience with one or more of the following: Command & Control (C2), physical security, cybersecurity, Nuclear Command, Control, and Communications (NC3) systems/processes, communications systems, facility design, military aerospace development (e.g.
Mechanical Engineer - Level 2 or 3 Northrop Grumman CorpMechanical Engineer - Level 2 or 3Huntsville, AL$79,600–$119,400 / yearThis requisition may be filled at either a Mechanical Engineer - Level 2 or a Principal Mechanical Engineer - Level 3. Basic Qualifications: Mechanical Engineer - Level 2: Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline from an accredited university and 2 years of related experience, or a Master''s Degree and 0-2 years of related experience. Mechanical Engineer - Level 3: Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline from an accredited university and 5 years of related experience, or a Master''s Degree and 3 years of related experience, or 1 year of related experience with a PhD.
NewHuman Factors Engineer - level 3/4 Northrop Grumman CorpHuman Factors Engineer - level 3/4Huntsville, ALIt is a vital operational system that enables the U.S. president, the secretary of defense, and combatant commanders at strategic, regional, and operational levels to systematically plan ballistic missile defense operations, collectively monitor the battle, and dynamically control networked sensors and weapon systems to achieve global and regional mission goals. A Bachelor's Degree in Computer Science, Computer Engineering, Mathematics, Physics, or a related field from an accredited university, along with 2 years of experience; or a Master's degree in a related field with 0 years of relevant work experience; or 6 years of relevant work experience may be considered as an alternative to a degree.
NewSentinel - Systems/Principal Systems Engineer - 17072* Northrop Grumman CorpSentinel - Systems/Principal Systems Engineer - 17072*Huntsville, AL$79,300–$131,400 / yearSupporting a team of engineers to create, mature and present comprehensive and cohesive technical charts representative of the appropriate level of maturation for any given milestone meeting and demonstrating team readiness in relation to achieving the milestone entrance and exit criteria. Definition of high-level functional and performance requirements and verification methods, subsequent analysis, decomposition, and derivation of requirements, allocation of those lower-level requirements to physical and functional architectural elements, and tracking them through design, verification, integration, and operational validation.
Sentinel Deputy Chief Software Engineer - 18979 Northrop Grumman CorpSentinel Deputy Chief Software Engineer - 18979Huntsville, AL$183,200–$318,100 / yearSupport Program Management Team (PMT) meetings, including but not limited to: Technical Review Board (TRB), Weapons System Working Group (WSWG), Configuration Control Board (CCB), Program Management Review (PMR), Program Increment (PI) planning and reporting, Risk & Opportunity Management Board (ROMB). The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
SYSTEMS SAFETY ENGINEER QTEC AerospaceSYSTEMS SAFETY ENGINEERHuntsville, ALFull timeAt least 2 years of experience with requirements decomposition and managementWorking knowledge of systems engineering principles and processesVerification experience or knowledgeExperience with requirements management tools such as DOORSExperience developing Certification or Verification packages for all levels of requirements (including safety requirements for operations, flight test, and ground test)Experience developing systems engineering and systems safety products in an Agile environmentSystem Safety Engineering experience conducting comprehensive system safety analyses IAW MIL-STD-882E, including Preliminary Hazard Analysis (PHA), Functional Hazard Analysis (FHA), System Hazard Analysis (SHA), and Operating & Support Hazard Analysis (O&SHA) to ensure compliance and mitigate operational risksMissile Defense Weapon System experience Desired Knowledge, Skills and AbilitiesExperience with Requirement Verification methods such as TestAssociate Safety Professional (ASP) / Certified Safety Professional (CSP) CertificateDemonstrated independent planning, organization, and working in cross-functional teams with a customer focusFamiliarity with Model Based Systems Engineering (MBSE) and associated toolsINCOSE or System Engineering certification Security ClearanceCandidates must currently have and be able to maintain a minimum DoD SECRET level security clearance. Job Duties/ResponsibilitiesResponsibilities will include, but may not be limited to the following: The candidate will thrive in a fast-paced work environment with high expectations, significantly diverse assignments, collaborative/teams comprised of all experience levels Minimum Education and ExperienceBachelor's degree in a STEM (Science, Technology, Engineering or Mathematics) discipline from an accredited university and 5 years of related work experience, or a Master's Degree in STEM and 3 years of related work experience, or a PhD.
Simulation Engineer, Mid-Level Simulation Technologies, Inc.Simulation Engineer, Mid-LevelHuntsville, ALFull timeResponsibilities Develop and refine system simulations, which include physics-based models Perform simulation-based performance analysis to support software updates and system improvements Analyze flight test data to verify and improve simulation accuracy Support studies to assess operational effectiveness of weapon systems Work with missile software and platform integration teams to ensure simulations reflect missile system of systems realities Generate briefings and technical reports to communicate system effectiveness. Minimum Qualifications & Education Requirements and Desired SkillsetsBachelor's degree or higher in Electrical Engineering, Computer Engineering, Computer Science, Physics, Mathematics or equivalent from an accredited institution required.
Modeling and Simulation Engineer, Mid-Level Simulation Technologies, Inc.Modeling and Simulation Engineer, Mid-LevelHuntsville, ALFull timeThis role requires developing and maintaining a high-fidelity 6DOF simulation of a weapon system with seeker and the digital environment used to characterize end-to-end system performance, supporting flight software integration, and performing trade studies that inform design and requirements decisions. Modeling and Simulation Engineer, Mid-Level OverviewSimTech, Inc., recognized as one of the 2026 Best Places for Working Parents, is seeking a Modeling and Simulation Engineer, Mid-Level to join our dynamic and diverse team in Huntsville, AL.
Radar Engineer/Analyst (M&S) Corvid Technologies LLCRadar Engineer/Analyst (M&S)Huntsville, ALFull timeWhy Corvid:We value our employee-owners and in addition to providing challenging work opportunities and competitive pay, Corvid believes in providing a strong benefit package that provides value to our team members at all stages of their career. Our team works on difficult, cutting-edge technical challenges using state-of-the-art technologies and resources.
Hypersonic Engineer Corvid Technologies LLCHypersonic EngineerHuntsville, ALFull timeCorvid has opportunities for experienced, personnel in the following areas:Technical Program Management Thermal Protection Systems/AerothermalAerodynamics/CFDMechanical Design/Integration Electrical Design Project Management/Operations (Programmatic) Test & Evaluation Metrology Specialized Manufacturing Guidance, Navigation, & Control (GNC)Requirements: Candidate must be a US citizen and possess (and maintain) a Secret Clearance Most positions will require a Bachelor's Degree in a related STEM Discipline and at least 5 years of experience working on Hypersonic Programs (advanced degrees are a plus) Demonstrated experience working development and production of high-speed weapon systems a plusExperience working with various applications and technologies related to the candidate's stated area of expertise About Corvid:Corvid Technologies is an engineering firm specializing in using high-fidelity, computational modeling and simulation to analyze, design, and manufacture products for aerospace, DoD, and commercial customers. Corvid's Hypersonic Team is adding engineers and program managers to lead multiple programs developing, testing and producing hypersonic systems and related technologies for DoW customers.
Electrical Engineer Invariant CorporationElectrical EngineerHuntsville, ALABAMAPartner closely with systems, mechanical, software, test, manufacturing, and quality teams to ensure the electrical design is not developed in isolation, but is fully aligned to packaging, thermal, timing, controls, ordnance interface, and mission performance constraints. Knowledge of responsibilities and tasks performed by various engineering departments/disciplines (e.g., design, test, software, technology, avionics) and understanding of how their products/processes affect one another and impact non-engineering processes (e.g., operations, logistics, business).
Embedded Software/Firmware Engineer Radiance Technologies IncEmbedded Software/Firmware EngineerHuntsville, ALMTO is looking for an Embedded Software/Firmware Engineer with the breadth and versatility to work across all design and development stages, from ideation to formal production acceptance testing for electronics subsystems utilizing embedded commercial processors, SoCs, GPUs, FPGAs and ASICs. MTO is involved in the development and analysis of protective technology capabilities and products, advancing the state-of-the-art for the Department of War in areas ranging from secure microelectronics packaging to board-level electronics development to system-level security for weapons systems.
Sr Systems Engineer (Solid Rocket Motor) (Remote Option Available) General Dynamics Ordnance & Tactical SystemsSr Systems Engineer (Solid Rocket Motor) (Remote Option Available)Huntsville, AlabamaRemote$100,300–$135,700 / yearCompany Overview: General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world. In addition to the benefits discussed above, the company offers the following voluntary benefits: Critical Illness Insurance, Accident Insurance, Identify Theft Protection, Enhanced Legal Services, Auto and Home Insurance, Pet Insurance, Commuter Benefits, Hospital Indemnity Insurance, Educational Assistance.
R&D Engineer II (SRM Ballistician) (Remote Option Available) General Dynamics Ordnance & Tactical SystemsR&D Engineer II (SRM Ballistician) (Remote Option Available)Huntsville, AlabamaRemote$82,400–$111,500 / yearThe candidate will work with design engineers to communicate operating pressures, analysts to communicate temperature and load profiles, chemists to communicate ballistic requirements, and manufacturing engineers to ensure grain geometry can be produced. Company Overview: General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world.
Advanced Systems Engineer - MBSE General Dynamics Mission Systems, IncAdvanced Systems Engineer - MBSEHuntsville, Alabama$118,519–$131,482 / yearModeling and analysis experience in aspects of the missile defense system (e.g., Aegis Weapons Systems, Ground-based Midcourse Defense (GMD), Glide Phase Intercept (GPI), Hypersonic and Ballistic Tracking Space Sensor (HBTSS), Fire Control, C2BMC, MDS sensors (EO/IR/RF), kill vehicles, interceptors, countermeasures, Systems engineering experience with large, complex systems. Candidate must have strong prior experience with use of MSOSA (Cameo) and DOORS and demonstrated knowledge in any of the MDA domain areas; including Ground-based Midcourse Defense (GMD), Glide Phase Intercept (GPI), Hypersonic and Ballistic Tracking Space Sensor (HBTSS), Fire Control, C2BMC, MDS sensors (EO/IR/RF).
NewTest Engineer Torch TechnologiesTest EngineerHuntsville, AlabamaDevelop and maintain engineering documentation including test procedures, test plans, interface documentation, signal definitions, test results, troubleshooting findings, and technical data supporting sustainment and validation activities. Collaborate with electrical, software, mechanical, and systems engineers to ensure appropriate test coverage, accurate implementation of test requirements, and successful integration of hardware and software within automated test environments.
Sr Mechanical Engineer (Analyst - Thermal focus) (Remote Option Available) General Dynamics Ordnance & Tactical SystemsSr Mechanical Engineer (Analyst - Thermal focus) (Remote Option Available)Huntsville, AlabamaRemote$100,300–$135,700 / yearCompany Overview: General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world. In addition to the benefits discussed above, the company offers the following voluntary benefits: Critical Illness Insurance, Accident Insurance, Identify Theft Protection, Enhanced Legal Services, Auto and Home Insurance, Pet Insurance, Commuter Benefits, Hospital Indemnity Insurance, Educational Assistance.
1022 - Model-Based Systems/Requirements Engineer Victory Solutions Inc.1022 - Model-Based Systems/Requirements EngineerHuntsville, ALAuthor process documents, develop template frameworks, and construct metric reporting methods to facilitate the execution of the MBSE solution to existing and future programs. Victory Solutions is a Small Disadvantaged Business providing quality technical and engineering services to NASA, the DoD, Industry and academia.
Sr Mechanical Engineer (Design Engineering - Solid Rocket Motors) General Dynamics Ordnance & Tactical SystemsSr Mechanical Engineer (Design Engineering - Solid Rocket Motors)Huntsville, Alabama$100,300–$135,700 / yearCompany Overview: General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world. In addition to the benefits discussed above, the company offers the following voluntary benefits: Critical Illness Insurance, Accident Insurance, Identify Theft Protection, Enhanced Legal Services, Auto and Home Insurance, Pet Insurance, Commuter Benefits, Hospital Indemnity Insurance, Educational Assistance.
Principal Architecture Engineer BlueHalo CareerPrincipal Architecture EngineerHuntsville, AlabamaMilitary Background : Previous military experience, preferably as a Navy veteran in roles like Aegis Weapon System EDO or Joint Interface Control Officer, or as an Army/Air Force veteran with knowledge of MDS elements such as THAAD, LTAMDS, Sentinel, PATRIOT, or GMD. Allied Systems Integration : Analyze the defense capabilities of Allied Missile Defense Systems and identify ways to incorporate them into U.S. systems to strengthen overall defense capabilities.
Sr Project Engineer (SRM) (Remote Option Available) General Dynamics Ordnance & Tactical SystemsSr Project Engineer (SRM) (Remote Option Available)Huntsville, AlabamaRemote$102,000–$138,000 / yearCompany Overview: General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world. In addition to the benefits discussed above, the company offers the following voluntary benefits: Critical Illness Insurance, Accident Insurance, Identify Theft Protection, Enhanced Legal Services, Auto and Home Insurance, Pet Insurance, Commuter Benefits, Hospital Indemnity Insurance, Educational Assistance.
Senior Systems Engineer (MBSE) EO Solutions CorpSenior Systems Engineer (MBSE)Huntsville, ALEO Solutions is seeking a highly skilled Senior Systems Engineer with deep expertise in Model-Based Systems Engineering (MBSE) and Systems Architecture Development to support the development and delivery of High Energy Laser Weapon Systems. The ideal candidate will be comfortable creating a tailored systems engineering capability to meet the needs of a hardware focused design team while implementing modern MBSE methodologies.
Ground Systems Digital Engineer Parsons CorpGround Systems Digital EngineerHuntsville, AL$112,200–$196,400 / yearIn this role you will work as a technical staff member of the Ground Systems (GMN) Systems Engineering team to champion the implementation and advancement of Model-Based Systems Engineering (MBSE) and digital toolsets within a DevSecOps environment. Incorporate MDA digital engineering directives into the GMN workflow to facilitate efficiency of technical reviews internal and external to GMN and other MDA Stakeholders.
Senior FPGA Engineer RTX CorpSenior FPGA EngineerHuntsville, ALTypically requires a Bachelor's Degree in Science, Technology, Engineering, or Mathematics (STEM) or related degree and minimum 5 years prior relevant electrical engineering experience Minimum 5 years of experience in at least 5 of the following categories: Digital Design and HDL coding targeting configurable logic devices Significant experience in delivering FPGA solutions to system level applications Extensive experience in one or more brands of (Altera, Lattice, Microchip, AMD) FPGA devices and associated tools Hands on experience with integration and debug of electronics using oscilloscopes, logic analyzers, multimeters, etc. Design and deliver production quality FPGA releases from initial proof of concept up to production Work cooperatively with systems, hardware, software engineers, and program management to ensure product success Design and code in VHDL for reliability, maintainability, reviewability, and reusability Verify designs utilizing self-checking techniques with directed and constrained random tests, while tracking functional and code coverage Create complete documentation including requirements, verification plan, user's guides, and configuration management.
Test Effectors Factory Test Electrical Engineer RTX CorpTest Effectors Factory Test Electrical EngineerHuntsville, ALoscilloscopes, power supplies, digital multimeters) Experience developing Production Test Equipment in an Automation environment Introduction or experience with computer architecture and computer hardware optimization techniques Introduction or experience in common computer hardware interface and data protocols such as TCP/IP, UDP, or RS-422 Experience performing analog, digital, and/or RF design Experience designing, testing, and integrating digital, mixed signal, and electrical system interconnect Experience utilizing integrated development environments and debugging tools to troubleshoot software Working understanding of the TEE One Page Process Introduction or experience with Microsoft Azure DevOps Server or GitHub. Eight (8) years of experience with electrical engineering design to include troubleshooting, analysis, and test Experience using schematic capture tools and interpreting schematics The ability to obtain and maintain a U.S. government issued security clearance is required.
Electrical Engineer II - Test RTX CorpElectrical Engineer II - TestHuntsville, ALoscilloscopes, power supplies, digital multimeters) • Experience developing Production Test Equipment in an Automation environment • Introduction or experience with computer architecture and computer hardware optimization techniques • Introduction or experience in common computer hardware interface and data protocols such as TCP/IP, UDP, or RS-422 • Experience performing analog, digital, and/or RF design • Experience designing, testing, and integrating digital, mixed signal, and electrical system interconnect • Experience utilizing integrated development environments and debugging tools to troubleshoot software • Working understanding of the TEE One Page Process. • Experience with commonly used electrical engineering design and analysis tools including but not limited to: Altium, DX Designer, Mentor Capital, Creo Schematic • Typically requires a degree in Science, Technology, Engineering or Mathematics(STEM) and a minimum of 2 years of prior relevant experience • Experience in factory/laboratory test instrumentation, electronics, and software (Ex.
Principal FPGA Engineer RTX CorpPrincipal FPGA EngineerHuntsville, ALDesigns commonly support the following applications: gigabit serial interfaces, Radio Frequency (RF) and Electro-Optical (EO) DSP, controls, data links, embedded processing, and processor interfaces. Designers collaborate with circuit card designers and systems engineers to develop requirements, architecture, modeling of algorithms, partitioning, code development, simulation, and place and route.
Senior EO/IR Modeling & Simulation Engineer ParsonsSenior EO/IR Modeling & Simulation EngineerHuntsville, Alabama$112,200–$196,400 / yearExperience developing, implementing, and executing six-degree-of-freedom (6DOF) and three-degree-of-freedom (3DOF) simulations using MATLAB/Simulink, Python, and C++ to model threat system components, engagement scenarios, and sensor behavior. In this role, you will support the threat intelligence community by developing and integrating advanced modeling and simulation solutions for ballistic missile defense (BMD) and anti-satellite (ASAT) weapon systems.
Command & Control Modeling & Simulation Engineer ParsonsCommand & Control Modeling & Simulation EngineerHuntsville, Alabama$112,200–$196,400 / yearProviding technical leadership for C2 simulation efforts, including coordinating with multidisciplinary teams, tracking technical progress, and engaging directly with customers to define and meet C2 M&S requirements. Proficiency with software engineering best practices (e.g., configuration management, Git, automated testing) and experience working in Linux, high-performance computing (HPC), or distributed simulation environments.
Air Vehicle Project Engineer IronMountain SolutionsAir Vehicle Project EngineerHuntsville, AlabamaWhile performing the duties of this job, the employee is occasionally required to stand; walk; sit; use tools or controls; normal physical activity (reach with hands and arms; climb stairs); and communicate effectively with all levels of employees and leadership. Experience with contract documents, such as Statements of Work (SOW), Contracts Data Requirements Lists (CDRL), Document Summary Lists (DSLs), Earned Value Management System (EVMS), Integrated Master Schedules.
Ground Systems Digital Engineer Parsons Commercial Technology Group Inc.Ground Systems Digital EngineerHuntsville, AL$112,200–$196,400 / yearIn this role you will work as a technical staff member of the Ground Systems (GMN) Systems Engineering team to champion the implementation and advancement of Model-Based Systems Engineering (MBSE) and digital toolsets within a DevSecOps environment. Incorporate MDA digital engineering directives into the GMN workflow to facilitate efficiency of technical reviews internal and external to GMN and other MDA Stakeholders.