p/>Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. December 5, 2025
For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
February 27, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
li>8 years of global quality experience, preferably with a medical device company, but would consider pharma or biotech, so that candidate can contribute to process designs and workflows within ERP (QMS, Quality Management, Master Data Governance, Batch Release, Materials Management, Production Planning, Document Control, CAPA's, Investigations and Document Management System to support Quality operations.) . - SAP S/4HANA Configuration & Optimization: Lead the setup, customization, and continuous improvement of SAP S/4HANA modules such as Quality Management, Master Data Governance, Batch Release, Materials Management, Production Planning, and Document Management System to support Quality operations.
Technical Leader, this role is responsible for developing and driving the cybersecurity testing strategy across the Software Quality Engineering organization while enabling the broader organization to consistently implement and execute a unified cybersecurity testing approach. A core focus of this role is embedding cybersecurity as a continuous, front-loaded component of the software development lifecycle to enable early identification and prevention of vulnerabilities and potential security risks, while maintaining compliance with medical device regulatory requirements.
p>This opportunity is well suited for engineers with experience in manufacturing, food production, consumer products, chemicals, industrial processing, or other large-scale production environments who enjoy managing complex infrastructure projects and driving operational improvements. This role is focused on leading and supporting capital projects that improve the safety, reliability, efficiency, and sustainability of critical industrial utility systems across multiple manufacturing facilities.
This position will play a key role in managing multi-discipline engineering efforts, supporting EPCm-style projects, and ensuring successful project execution across safety, quality, cost, and schedule. This role is ideal for a hands-on engineering professional who is experienced across the full project lifecycleāfrom concept and pre-FEED through commissioning and startup.
li>Attend morning POD meetings, collaborating with operations and reliability personnel throughout the day, overseeing contractors performing/executing on the projects in the field and would be responsible for all the administrative project paperwork, such as developing scopes of work, technical specifications, helping get quotes for equipment, bidding out if necessary and coordinating material deliveries and installation with the plant as well. Project Engineer Responsibilities: - Plant Fleet based engineering role to support energy supply projects group to help manage capital projects at the power plants across the region.
Since 2010, SynergisticIT has helped thousands of candidates land full-time jobs at tech leaders and enterprise employersācompanies such as Google, Apple, PayPal, Visa, Western Union, Wells Fargo, Intel, Walmart Labs, Citi, JPMC, Bank of America, Deloitte, and many moreāwith offers often ranging from $95,000 to $154,000 depending on role and skill depth. Instead of chasing every shiny trend, JOPP focuses on roles employers repeatedly hire for: Java full stack, software programming, Python/Java development, DevOps, data analyst, data engineer, data scientist, and ML/AI engineer.
December 8, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
April 16, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Englewood, CO30+ days ago
Minimum 3 yearsā experience with Video Conferencing/AV integration design, engineering, installation and support, Experience with A/V Platforms: QSC / Qsys environment, Crestron, Extron, Shure, Sennheiser, Mackie, Dante, Running Live Sound, ETC Lighting, DMX, Global Cache, Video Wall processors / RGB Spectrum, IP Cameras Platforms. You will be responsible for all aspects surrounding the engineering, configuration, installation, maintenance, training, and upgrade of our Global IP-Video Tandberg/Cisco and Web based (Zoom) infrastructure (Operating in 16 different Countries).
Englewood, CO30+ days ago
In this role, you will provide high-level process engineering expertise across oil refining, pipeline, gas processing, and/or chemical industry projects. This is an excellent opportunity for a seasoned engineer who thrives in a collaborative, multi-disciplinary environment and is passionate about delivering high-quality engineering solutions.
With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Develop, check and be the technical owner and approver of process engineering deliverables including, but not limited to, the following: Process Flow Diagrams (PFDs), Heat and Material Balances (HMBs), Piping & Instrumentation Diagrams (P&IDs).
li>Advanced technical knowledge and experience with small molecule API manufacturing equipment and utility systems, such as chemical reactors, filters, centrifuges, dryers, vacuum pumps, scrubbers, purified water, process compressed gases, and engineered heat transfer fluid systems. This role combines technical leadership with strategic client engagement, supporting process design, scale-up, optimization, and regulatory compliance across a variety of pharmaceutical and chemical industry projects.
p>In this capacity, the successful candidate will be responsible for the following: - System Design:Lead and support the planning and process evaluation of potable water treatment processes, including intakes and raw water pump stations, coagulation, flocculation, sedimentation, disinfection, filtration, iron and manganese removal, PFAS treatment, chemical systems, and process wastewater and residuals handling.
- Experience in the planning and execution of projects: including project approach and resource needs, options analysis, process and equipment design, and engineering document development through the project delivery phases of plan, design, procure, construct, and commissioning.
Use processes such as physical/chemical primary treatment, conventional activated sludge, biological nutrient removal, fixed-film processes, membrane bio-reactors (MBR), sidestream treatment, tertiary filtration, auxiliary wet-weather treatment, and disinfection. In this capacity, the successful candidate will be responsible for the following:
- System Design:Lead and support the planning and process evaluation of wastewater processes, including biological nutrient removal, sludge handling, and filtration processes.
li>Review and interpret technical engineering documentation, including but not limited to: offsite consequence analyses (OCAs), process safety information; process hazard analyses (PHAs); operating procedures; training records; mechanical integrity programmatic records; management of change (MOC) and pre-startup safety review (PSSR) packages; compliance audits; incident investigations; employee participation plans; hot work permits; contractor management plans; and emergency response programs and procedures. The ideal candidate will be responsible for leading technical engineering and compliance investigations in relation to Section 112(r) of the Clean Air Act (both the General Duty Clause and RMP), as well as applicable Emergency Preparedness and Community Right-to-Know Act (EPCRA) and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) requirements.
Denver, Colorado25 days ago
li style="font-family:'verdana' , 'geneva' , sans-serif;font-size:10pt">Experience with:- Hydraulic modeling (PIPE-FLO, WaterCAD, Fathom, other). WHAT YOU'LL DO:
- Design water and wastewater treatment facilities, including advanced treatment/nutrient removal and reuse, distribution and conveyance, and related infrastructure balance of plant.
li>Mathematical Reasoning - Understands and applies complex mathematical concepts, including geometry and trigonometry, works with various 2D and 3D coordinate systems, applies Geometric Dimensioning & Tolerancing requirements, and writes and troubleshoots simple formulas in Excel or similar software. Analytical/Critical Thinking - Ability to analyze data to identify root causes, develops strategies for routine issues, recommends process improvements, and evaluates solutions with flexibility and critical thinking.
The successful candidate will: Have experience with nuclear system design, working with Safety Class or Safety Significant systems and working under a NQA-1 program or,
Have experience with energetics or explosives system design. Burns & McDonnell's PTO program includes the paid sick leave entitlements provided under the Colorado Healthy Families and Workplaces Act (HFWA).
Denver, Colorado30+ days ago
div>Equinox Engineering is an International EPCM leader known for innovative facility design and engineering across natural gas, oil, heavy oil, carbon capture, power generation, emerging energy, and brownfield Projects around the globe. Ready to Apply?
If you're looking to accelerate your process engineering career, contribute to impactful energy projects, and learn from industry-leading engineers, weād love to hear from you.
The engineering design focus will include the following areas of focus: process systems, process-mechanical, Bulk Gas delivery and UHP (VHP/Gas/Chemical), Industrial Waste lift, collection and treatment, and UPW (make-up, primary, and polish loop) systems for multiple ongoing projects through all phases including programming, schematic, design development, constructions documents, construction administration and project close-out. - Build our team by recruiting, mentoring, assisting project teams;
- Champion technical growth in our engineering teams;
- Assist in developing business plans to assist strategic growth forecast, progressively building year upon year;
- Champion growth in the Industrial market in the US western region,
- Ability and willingness for occasional travel to domestic sites.
BlueWTR is hiring a Senior Process Engineer/Design PM to lead process design and technical delivery on industrial water and wastewater projects across hyperscale data center, RNG/biogas, semiconductor, advanced manufacturing, and food & beverage markets. We design and build process water, wastewater, reuse, and high-purity water infrastructure for clients in advanced manufacturing, RNG/biogas, semiconductor, food & beverage, and hyperscale data centers.
Lakewood, Colorado30+ days ago
ABOUT YOU: BlueWTR is hiring a Senior Process Engineer/Design PM to lead process design and technical delivery on industrial water and wastewater projects across hyperscale data center, RNG/biogas, semiconductor, advanced manufacturing, and food & beverage markets. A DAY IN THE LIFE:
- Lead process design on assigned industrial water and wastewater projects; membrane (UF/NF/RO), biological, chemical, solids handling, and reuse, from FEL through commissioning.
To that end, under the direction of the Associate Director, Legal Practice Engineering, the Legal Process Engineer will play a critical role at the intersection of legal domain expertise, process engineer, and digital product development, working directly with the firm's practitioners across offices and practice areas to uncover, analyze, and re-design legal workflows. Position responsibilities:
ā¢ Lead workflow discovery efforts in direct partnership with practice groups and Knowledge Management attorneys, capturing end-to-end legal workstreams across corporate, regulatory, and transactional domains, including those that impact external stakeholders such as clients and their directors, officers, and investors.
This role will play a key part in āowning, troubleshooting, and improving the electrode slurry process within our battery cell pilot line.ā The preferred candidate will have āprocess or manufacturing engineering experience, strong troubleshooting instincts, and a drive to make hands-on improvements alongside operators.ā . Employment in this position is conditioned on the continued availability of government authorization to authorize release of such items, to the extent required, including without limitation an export license, or other documentation required to establish authorization to receive access to such items.
Associated Engineering, a proudly Canadian, Employee-owned Company is seeking an experienced and dedicated Senior Wastewater Process Engineer to join our team in our Vancouver, Edmonton, Calgary, Saskatoon, Regina or Markham office. A broad variety of meaningful work that supports local communities ā we are a medium-sized company working on significant projects, helping to shape communities!
p>Within our Corporate Project Engineering team located in Denver, Leprino is seeking a Process Engineer II to own large, high-complexity capital projects and lead process design decisions across our cheese and nutrition manufacturing network. This role carries full accountability for scope, technical direction, and execution from early design through commissioning, working directly with plant teams, equipment partners, and general contractors to bring major systems online.
p>8+ years of combined experience in pharma/biopharma and fine chemicals industry to include experience with P&IDs, facility layouts, mass and energy balances, solvent handling, equipment design, user requirement specifications (URS). This is your opportunity - not only to join a committed, professional, and forward-thinking team but also to lead in the design and implementation of complex manufacturing processes and transform broad concepts into structured results-focused projects.
p>8+ years of combined experience in pharma/biopharma and fine chemicals industry to include experience with P&IDs, facility layouts, mass and energy balances, solvent handling, equipment design, user requirement specifications (URSs). This is your opportunity - not only to join a committed, professional, and forward-thinking team but also to lead in the design and implementation of complex manufacturing processes and transform broad concepts into structured results-focused projects.
Louisville, CO20 days ago
We are a diverse and growing team working in brand-new facilities in downtown Seattle, Washington and Louisville, Colorado, and we are looking for innovative thinkers who are excited by groundbreaking science and technology, and passionate about squaring up to the challenges inherent to cutting-edge drug development. This role will lead the development, scale-up, and tech transfer of lentiviral vector drug product and drug substance processes from lab to GMP scale (250 mL to 200 L), applying Quality by Design (QbD) principles, and supporting transitions through multiple clinical stages.
We are a high performing team of engineers and designers that leads the water engineering process and collaborates with Kiewit's construction teams to approach construction-driven engineering with a focus on safe, cost effective, and innovative designs, all working to develop the best possible delivery of water facility projects to our clients. The Kiewit Water Engineering team, which includes process, mechanical, piping, electrical, instrumentation and control, structural, and civil disciplines, is a multi-faceted division of Kiewit with best-in-class technical expertise focused on collaborative Design-Build (progressive and/or fixed price) and EPC delivery models for complex water projects.
p>Role & Responsibilities: - Lead cross functional teams to execute complex projects that have a substantial impact on business operations, utilizing structured problem-solving methodologies.
- Identify process improvement opportunities, builds business cases, and launches project teams using good project management to oversee team activities.
Design water and wastewater treatment facilities, including advanced treatment/nutrient removal and reuse, distribution and conveyance, and related infrastructure balance of plant. Minimum twelve (12) years of experience in design, construction oversight, and operation of water and/or wastewater infrastructure facilities and projects.