66 Results for

Process Engineer Jobs in Falls Church, VA

Jobs

Fairfax, VA

$110,000–$155,000 / year

li>Review and interpret technical engineering documentation, including but not limited to: offsite consequence analyses (OCAs), process safety information; process hazard analyses (PHAs); operating procedures; training records; mechanical integrity programmatic records; management of change (MOC) and pre-startup safety review (PSSR) packages; compliance audits; incident investigations; employee participation plans; hot work permits; contractor management plans; and emergency response programs and procedures. The ideal candidate will be responsible for leading technical engineering and compliance investigations in relation to Section 112(r) of the Clean Air Act (both the General Duty Clause and RMP), as well as applicable Emergency Preparedness and Community Right-to-Know Act (EPCRA) and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) requirements.

10 days ago

Fairfax, VA

$80,000–$180,000 / year

p>In this capacity, the successful candidate will be responsible for the following:

System Design:Lead and support the planning and process evaluation of potable water treatment processes, including intakes and raw water pump stations, coagulation, flocculation, sedimentation, disinfection, filtration, iron and manganese removal, PFAS treatment, chemical systems, and process wastewater and residuals handling.
Experience in the planning and execution of projects: including project approach and resource needs, options analysis, process and equipment design, and engineering document development through the project delivery phases of plan, design, procure, construct, and commissioning.

30+ days ago

Fairfax, VA

$80,000–$180,000 / year

Use processes such as physical/chemical primary treatment, conventional activated sludge, biological nutrient removal, fixed-film processes, membrane bio-reactors (MBR), sidestream treatment, tertiary filtration, auxiliary wet-weather treatment, and disinfection.

In this capacity, the successful candidate will be responsible for the following:

System Design:Lead and support the planning and process evaluation of wastewater processes, including biological nutrient removal, sludge handling, and filtration processes.

30+ days ago

Washington

Providing direction and leadership to the Technical Assistant in completing daily tasks and projects including monthly line yield reports and daily line run data.

Facilitating and supporting self-directed work teams in reaching consensus with respect to process improvements, material dispositions, production delays, etc.

21 days ago

Fairfax, Virginia

$80,000–$180,000 / year

ul>

System Design:Lead and support the planning and process evaluation of potable water treatment processes, including intakes and raw water pump stations, coagulation, flocculation, sedimentation, disinfection, filtration, iron and manganese removal, PFAS treatment, chemical systems, and process wastewater and residuals handling. Explore some of our signature water resources and environmental projects here. .

30+ days ago

Fairfax, Virginia

$80,000–$180,000 / year

In this role you will lead and support design of wastewater treatment through evaluation of existing processes and facilities; treatment assessments; design of improvements, expansions, and new facilities; permitting; and construction administration.

30+ days ago

$103,000–$150,000 / year

To that end, under the direction of the Associate Director, Legal Practice Engineering, the Legal Process Engineer will play a critical role at the intersection of legal domain expertise, process engineer, and digital product development, working directly with the firm's practitioners across offices and practice areas to uncover, analyze, and re-design legal workflows.

Position responsibilities:

• Lead workflow discovery efforts in direct partnership with practice groups and Knowledge Management attorneys, capturing end-to-end legal workstreams across corporate, regulatory, and transactional domains, including those that impact external stakeholders such as clients and their directors, officers, and investors.

30+ days ago

Baltimore, MD

$79,600–$119,400 / year

p>Manufacturing Process Engineers have responsibilities that include, but are not limited to:

Factory Support:

Monitoring process performance; optimizing and implementing improvements to ensure stable and expected outputs; collaborating with multiple manufacturing teams in using lean and continuous improvement tools.
Design and Engineering Support:
- Performing producibility reviews of new product designs; recommending product design changes to improve manufacturability; training design engineers to assess designs for manufacturability.

12 days ago

Arlington, VA

$135,320–$271,176 / year

The PFAS Regional Lead will provide subject matter expertise on compliance with the NPDWR and analytical methods for PFAS monitoring, development of protocols for rapid small-scale column testing and pilot testing, development and analysis of breakthrough curve models, and design and implementation of adsorption processes for PFAS treatment.

Project Execution:

Serve as a technical advisor with a deep understanding of PFAS regulations, rapid small-scale column testing and pilot testing, , development and analysis of breakthrough curve models, and design and implementation of adsorption processes for PFAS treatment, with support and guidance from PFAS Practice Leads.

3 days ago

Bethesda, MD

Partner with client engineering, manufacturing, quality, and supply chain teams to map current processes, identify bottlenecks and recurring issues, and propose innovative design and operating strategies that improve throughput, safety, maintainability, and flexibility for future products. As a Decision Analytics Consultant in Manufacturing, you will: Lead and support process design, operational improvement and optimization projects across drug substance and drug product manufacturing (e.g., upstream, downstream, utilities, fill-finish), from early concept through detailed design and implementation.

30+ days ago

$108,235–$156,729 / year

p>(For more details on TSMC's Core Values, please visithttps://www.tsmc.com/english/aboutTSMC/values).

To be eligible for employment at TSMC, candidates must successfully pass a background check and a drug screening.xa0Please note, in compliance with Washington state regulations, the drug screen will not test for cannabis (marijuana) use.

24 days ago

Rockville, MD

$112,200–$187,000 / year

It includes identifying requirements, conceptualizing system architecture and developing the layout through final design, performing process calculations, selecting and specifying equipment components ensuring they meet all technical specifications and program/project requirements.

Perform Systems Engineering processes for the designed mechanical systems and components:

Demonstrate project management skills to effectively organize and lead external engineering partners and internal stakeholders.

30+ days ago

Rockville, MD

$79,336.80–$119,005.20 / year

Responsibilities include leading on-the-floor / hands-on technical support, developing technical instructions, procedures, and operator training content, performing data analysis and process performance trending, leading complex deviation investigations, driving implementation of CAPAs and continuous improvement through change controls, and contributing to validation and regulatory deliverables. Contribute to technology transfer packages (process descriptions, URS inputs, BOMs, risk assessments), implement process changes, coordinate execution of engineering runs and comparability/bridging studies, author technical reports.

30+ days ago

Germantown, MD

p>Precigen is a dedicated commercial and clinical stage biopharmaceutical company advancing the next generation of gene therapies using precision technology to target the most urgent and intractable diseases in our core therapeutic areas of immuno-oncology, autoimmune disorders, and infectious diseases. This position will be supporting all technical aspects of Gene Therapy cGMP manufacturing of late clinical stage to commercialization of Adenovector products, including process transfer, process validation, continuous process verification, person in plant manufacturing support, and regulatory filings.

30+ days ago

Washington, DC

$179,000–$203,000 / year

p>Process engineering at a heavy forging, specialty steel, or large casting operation; R&D roles focused on forging process development or advanced metal forming; aerospace forging operations (titanium, nickel superalloy, or steel); national laboratory research in manufacturing science or nuclear materials processing; advanced degree in metallurgical engineering, materials science, or mechanical engineering with a focus on metal casting and forming. Through its design-once, build-many approach and coalition building across communities, regulators, and financial stakeholders, The Nuclear Company is committed to delivering safe and reliable electricity at the lowest cost, while catalyzing the nuclear industry toward rapid development in America and globally.

21 days ago

Annapolis Junction, Maryland

div>

Collaboration:You’ll work hand-in-hand with cross-functional teams, fostering a collaborative environment that ensures the seamless integration and successful implementation of processes across the organization.

Pay Range:

There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.

30+ days ago

$94,400–$198,200 / year

p>Pay Range:

Collaboration: Youll work hand-in-hand with cross-functional teams, fostering a collaborative environment that ensures the seamless integration and successful implementation of processes across the organization.

30+ days ago

Linthicum, Maryland

$146,000–$234,000 / year

ul>

Bachelor’s degree in Computer Science, Information Systems, Engineering, Business, or Education from an accredited school or university and ten (10) years of experience with Process Improvement on programs and contracts of similar scope, type, and complexity.

A high school diploma or GED plus 4 additional years of process engineering experience, for a total of fourteen (14) years of relevant experience, would also be acceptable in lieu of a qualifying college degree.
Peraton offers enhanced benefits to employees working on this critical National Security program, which include heavily subsidized employee benefits coverage for you and your dependents, 25 days of PTO accrued annually up to a generous PTO cap and eligible to participate in an attractive bonus plan.

30+ days ago

$143,913–$187,093 / year

li>Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

Related curriculum-- Successful completion of a curriculum leading to a bachelors degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelors degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

You will serve as a Chemical Engineer and be responsible for serving as a senior technical advisor to the ENG-5 Division Chief in matters related to bulk solid cargo carriage, packaged hazardous materials, Pipeline and Hazardous Materials Safety Administration (PHMSA) maritime modal evaluation (special permits and competent authority determinations, Title 49 Code of Federal Regulations: interpretation and revision), development of international regulations for bulk solid cargoes and packaged hazardous materials (International Maritime Solid Bulk Cargoes and International Maritime Dangerous Goods Codes), and the application of international and domestic Conventions, laws, regulations, and policies relating to bulk solid and packaged cargoes.

14 days ago

Fort Meade, MD

p>This position will help identify, evaluate, and recommend opportunities to leverage Artificial Intelligence (AI), Machine Learning (ML), Generative AI, Large Language Models (LLMs), Natural Language Processing (NLP), and intelligent document processing technologies to improve the speed, accuracy, and efficiency of cybersecurity and risk management operations.

The successful candidate will work closely with process engineers, cybersecurity professionals, and government stakeholders to assess current workflows and develop innovative solutions that accelerate RMF execution and reduce manual effort.

4 days ago

$100,000–$120,000 / year

Primary Responsibilities: Provide manufacturing process engineering support to technical and management staff Support design, development, and analysis of manufacturing processes for energetic materials Perform engineering analysis to support equipment upgrades, repairs, and industrial systems Support facility layout, modernization, renovation, and sustainment efforts Provide analysis for protective construction and blast-related engineering requirements Assist with integration of manufacturing systems, controls, and processing requirements Support incorporation of SMART manufacturing technologies, including data acquisition and system integration Develop and maintain technical documentation including SOPs, production plans, and technical data packages Support analysis of production processes and assist with process improvements Coordinate with engineering, manufacturing, and program management personnel Support engineering activities across manufacturing, development, and in-service environments Perform other duties as assigned to support operational and organizational objectives Qualifications: Required: Active U.S. DoD SECRET Security Clearance (Must have interim clearance before start date) Bachelors degree in Engineering or related field Minimum 5 years of relevant engineering experience Experience supporting engineering or manufacturing environments Experience developing technical documentation and engineering reports Ability to support engineering analysis and process-related activities Preferred: Experience supporting energetics, ammunition, explosives, or defense programs Experience working at NSWC Indian Head or similar DoD environments Experience supporting manufacturing systems, equipment upgrades, or process improvements Familiarity with technical data packages (TDPs) and engineering documentation Experience supporting industrial or production environments About Altus Since 2004, Altus Technology Solutions has been committed to providing top-quality, performance-driven services to both government and commercial clients.

Manufacturing Process Engineer Location: Indian Head, MD Remote Type: No Remote Clearance: Active U.S. DoD SECRET Security Clearance Education: Bachelor's degree in a relevant engineering field Years of Experience: 5+ years of relevant technical experience in engineering Salary Information: $100,000 - $120,000 per year Description Altus Technology Solutions is seeking a Manufacturing Process Engineer to support energetic materials manufacturing and engineering operations at Naval Surface Warfare Center Indian Head Division (NSWC IHD).

30+ days ago

Washington, District of Columbia
div class="job-description-container">
Job Title: Process Engineer
Location: Branchburg, NJ. We are currently working on Various projects such as media entertainment, ERP Solutions, data warehousing, Web Applications, Telecommunications and medical to our clients all over the world.
30+ days ago

Baltimore, MD
$90,000–$100,000 / year
Available online at homechef.com and in retail at more than 2,100 Kroger grocery stores, Home Chef is committed to inspiring and enabling more people to cook simple, delicious meals, no matter how busy they are.
Serve as a key liaison between plant operations and cross-functional partners, including maintenance, engineering, and corporate CI teams to communicate process needs, issues, and improvement opportunities.
30+ days ago

MD
$146,000–$234,000 / year
p>Individual Capabilities/Experience Required:
Bachelor's degree in Computer Science, Information Systems, Engineering, Business, or Education from an accredited school or university and ten (10) years of experience with Process Improvement on programs and contracts of similar scope, type, and complexity.
Peraton offers enhanced benefits to employees working on this critical National Security program, which include heavily subsidized employee benefits coverage for you and your dependents, 25 days of PTO accrued annually up to a generous PTO cap and eligible to participate in an attractive bonus plan.
30+ days ago

DC
p>What Were Looking For:
A Bachelors Degree in Civil or Environmental Engineering or a related engineering discipline 3+ years of water treatment design experience Engineer-in-Training (EIT), PE License or actively pursuing PE registration in a State(s) where Apex does work or ability to obtain same by reciprocity Valid US Drivers license and clean driving record Ability to effectively communicate/interact within project teams and with clients Ability to direct activities of less experienced staff Excellent written and oral communication skills CAD proficiency and experience in technical report writing is ideal Experience with 3D drafting/BIM products, such as Plant 3D, Revit, or Navisworks is a plus Prior experience working in engineering consulting is strongly preferred. • Assist the Project Manager and other senior staff in complying with assigned project schedules and budgets on less complex projects or discrete tasks on more complex projects by actively reporting on project progress and by identifying additional work outside the contractual Scope of Work.
30+ days ago

Washington, DC
div>
Education and Experience Requirements
Candidates must meet the following minimum education and relevant experience combinations by level:
Entry Level:. We're looking for a Business Process Engineer with a background in process modeling, operational analysis, and IT lifecycle optimization to support critical federal and intelligence community initiatives.
18 days ago

Chantilly, VA
$117,300–$175,900 / year
As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers.
The Parts, Materials & Processes Department (PMPD) includes subject matter experts across a broad range of areas pertaining to electrical, electronic, and electromechanical (EEE) parts procurement, qualification, application, root cause failure analysis, as well as materials and processes.
30+ days ago

Linthicum Heights, MD
Experience is to include, within the past ten (10) years, five (5) years' experience in facilitation, training, methodology development and evaluation, process engineering across all phases of acquisition identifying best practices, change management, business management techniques, organizational development, activity and data modeling, or information system development methods and practices. We provide fresh alternatives to ordinary, mainstream consulting firms through small, highly skilled, and hand-picked teams that can meet clients' needs in any industry.
12 days ago

Maryland
The process engineer will work directly with operations, safety, quality, and production personnel to understand how products move through multiple on-site manufacturing buildings in a high-compliance, batch-based environment, and lead the transition to digitally captured, auditable processes while maintaining safety as the highest priority. Elicit detailed process knowledge from non-technical stakeholders, including personnel who may be:
Deep operational experience whose workflows are informal or not fully documented.
18 days ago

Rockville, MD
$100,000–$140,000 / year
li>A master's degree in engineering or related field (may include a combination of experience obtained through an academic institution, e.g., design projects, research, or design teams, as well as professional experience) may be in lieu of two years of experience.
Integrate chemical engineering principles into HTGR plant design, covering helium Brayton and Rankine cycles, heat exchanger networks, hydrogen production, tritium control, and off-gas systems.
30+ days ago

New
Fort Meade, MD
The successful candidate will analyze, document, and improve RMF-related business processes while helping drive efficiency, automation, and continuous improvement across enterprise risk management operations.
Demonstrated working knowledge of the DoD Risk Management Framework (RMF) as defined in NIST SP 800-37, NIST SP 800-53, CNSSI-1253, and applicable DoD Instructions (e.g., DoDI 8500.01,
4 days ago

MD
$110,000–$143,000 / year
p>What you will be doing:
We are seeking an innovative AI Business Process Engineer (AI-BPE) with experience supporting Department of Defense (DoD) environments to transform mission and business processes through AI-enabled automation, data-driven decision-making, and digital engineering practices.
JASINT participates in E-Verify and will provide the federal government with I-9 information to confirm that all new hires are authorized to work in the U.S. To learn more about E-Verify, please visit dhs.gov/e-verify.
30+ days ago

MD
Must have ten years of experience conducting Business Process Engineering activities and five years of experience utilizing process improvement methodologies for Commercial Off-the-Shelf integration programs, or fourteen years of Business Process Engineering experience and five years of process improvement experience if no bachelor's degree is held. • Must have the ability to apply process improvement and re-engineering methodologies to conduct process modernization projects, including performing activity and data modeling, developing modern business methods, identifying best practices, and creating and assessing performance measurements.
30+ days ago

Annapolis Junction, MD
$110,000–$143,000 / year
p>We are seeking an innovative AI Business Process Engineer (AI-BPE) with experience supporting Department of Defense (DoD) environments to transform mission and business processes through AI-enabled automation, data-driven decision-making, and digital engineering practices.
JASINT participates in E-Verify and will provide the federal government with I-9 information to confirm that all new hires are authorized to work in the U.S. To learn more about E-Verify, please visit dhs.gov/e-verify.
30+ days ago

Fort Meade, MD
The Warfare Systems team is currently seeking a Process Engineer II in support of an exciting new effort supporting one of our clients that is responsible for unifying the direction of cyberspace operations, strengthening DoD cyberspace capabilities, and integrating and bolstering DoDs cyber expertise. Minimum of five (5) years of experience in the identified area of expertise providing support in a cyber-operations center to include: Providing document Operational and Strategic level processes across operation center functional cells.
30+ days ago

DC
$146,000–$194,000 / year
We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested war-fighting domain.
To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:
No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process.
30+ days ago

Fort Meade, MD
A Bachelor’s degree in Electrical Engineering, Computer Engineering, or Computer Science from an accredited college or university (OR) in lieu of a degree, Five (5) years of additional DSP experience may be substituted. ProSync Technology Group, LLC (ProSync) is an award-winning, SDVOSB Defense Contracting company with a strong military heritage and a record of excellence in supporting the Department of Defense and the Intelligence Community.
30+ days ago

Arlington, VA
$87,100–$157,450 / year
p>For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
30+ days ago

Fort Meade, MD
Full time
The Warfare Systems team is currently seeking a Process Engineer II in support of an exciting new effort supporting one of our clients that is responsible for unifying the direction of cyberspace operations, strengthening DoD cyberspace capabilities, and integrating and bolstering DoD's cyber expertise. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals.
30+ days ago

Washington, District of Columbia
strong>Material Expertise: Experience in processing various rubber materials including Natural, SBR, Nitrile, Chloroprene, Fluorocarbon, Silicone, Fluorsilicone, HNBR, AEM, and ACM.
• Resume Submission: Applicants are encouraged to provide detailed information regarding their machine experience, including brands and machine names, if not explicitly mentioned in their resume.
30+ days ago

MD
$160,000–$198,000 / year
p>Background in Digital Signal Processing with strong understanding of satellite communications system design, theory, and software implementation Experience with DSP hardware and software development tools (digitizers, development kits, IDEs) Experience creating or integrating components with software-defined radio (SDR) development suites such as GNURadio or X-Midas Familiarity integrating signal processing technologies into virtual (VMWare) and containerized (Docker/Kubernetes) environments.
Bachelor's degree or equivalent combination of education, and experience Minimum 10+ years of relevant experience Experience in RF signals analysis Experience with message queue implementation and communication frameworks Ability to design, develop, and implement systems within a Linux environment Demonstrated experience coding with C++ and Python.
30+ days ago

Laurel, MD
You'll be joining our hardworking team of system engineers, algorithm developers, FPGA and embedded software engineers, and advanced EW technology enthusiasts who enjoy working together to craft creative solutions to complex challenges.
The Johns Hopkins University Applied Physics Laboratory (APL) brings world-class expertise to our nation's most critical defense, security, space and science challenges.
30+ days ago

Maryland
The position requires technical coordination with internal and external organizations to support requirements definition, near real-time C++ implementations of ground-breaking Digital Signal Processing algorithms, and coordination with teams implementing similar algorithms within MATLAB, as well as within System on a Chip (SoC) embedded solutions (RFSOC). To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.
30+ days ago

Laurel, Maryland
p style="margin:0in;font-size:11pt;font-family:'calibri' , sans-serif;color:#000000;font-weight:400">We are seeking a creative signal processing engineer to help us build innovative technology applications for the next generation of electronic warfare systems. Description:
Do you love applying your signal processing experience to solve complex problems in the RF domain, in particular, electronic warfare?.
30+ days ago

Manassas, VA
You will work with applications team and shift team members within the department as well as shift engineers from other process areas to investigate and resolve any measurement recipe related issues as well as equipment related issues occurring within the fabrication line!
As a Metrology Operations Shift Engineer at Micron Technology, Inc. in Manassas, VA (MTV), you will be responsible for investigating, improving and maintaining measurement recipes within the Metrology department.
12 days ago

New
Baltimore, MD
$65,000–$108,000 / year
li>Originates concepts for new and existing packaging equipment, including support equipment such as conveying, robotics, instrumentation, weight control, and quality systems.
ASR Group is the world's largest refiner and marketer of cane sugar, with an annual production capacity of more than 6 million tons of sugar.
5 days ago

Manassas, Virginia
You will work with applications team and shift team members within the department as well as shift engineers from other process areas to investigate and resolve any measurement recipe related issues as well as equipment related issues occurring within the fabrication line!
As a Metrology Operations Shift Engineer at Micron Technology, Inc. in Manassas, VA (MTV), you will be responsible for investigating, improving and maintaining measurement recipes within the Metrology department.
14 days ago

Indian Head, MD
Full time
Applied Research Associates, Inc. is a 100% employee-owned international research and engineering company recognized for providing technically superior solutions to complex and challenging problems in the physical sciences. The Engineer will be responsible for assisting project teams in the design, operation, and commissioning of energetic material production and processing in support of military weapons systems.
30+ days ago

Columbia, MD
$109,250–$149,500 / year
Recognized manufacturing process technical expert who can independently provide engineering knowledge and oversight to plan and develop manufacturing processes, identify, spec, and procure mfg equipment, develop operation plans to support product development and transfer, resolve manufacturing- and quality-related problems, and interface with production facilities to act as the "Voice of Operations" on projects. The Process Engineer, Change Control - Operations Center of Excellence (CoE), reporting to the Director, Global Operations Excellence CoE, is a position accountable for implementing, governing, and scaling best‑in‑class manufacturing change control processes across a global life sciences manufacturing network.
30+ days ago

Manassas, VA
$90–$120 / hour
In terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Everforth Apex also offers a HSA (Health Savings Account on the HDHP plan), a SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions, a corporate discount savings program and other discounts.
30+ days ago

Stand out to leading employers.

Upload your resume and let employers find you for new Process Engineer job openings. Plus, receive relevant job matches delivered straight to your inbox.

Create A Free Account

Process Engineer Jobs in Falls Church, VA

Entry Level:. We're looking for a Business Process Engineer with a background in process modeling, operational analysis, and IT lifecycle optimization to support critical federal and intelligence community initiatives.

As a Metrology Operations Shift Engineer at Micron Technology, Inc. in Manassas, VA (MTV), you will be responsible for investigating, improving and maintaining measurement recipes within the Metrology department.

Similar Job Searches

Stand out to leading employers.

Process Engineer Jobs in Falls Church, VA

Senior Process Safety/Chemical Engineer Eastern Research Group Inc

Water Treatment Process Engineer GFT Infrastructure Inc

Wastewater Treatment Process Engineer GFT Infrastructure Inc

Process Engineer AS BlueScope

Water Treatment Process Engineer GFT.

Wastewater Treatment Process Engineer GFT.

Legal Process Engineer Cooley LLP

Manufacturing/Process Engineer 2/3 Northrop Grumman Corp

Sr. PFAS Process Engineer Black & Veatch Holding Co

Decision Analytics Consultant - Process Engineer (Manufacturing) ZS Associates Inc

Principal Process Engineer-Etch Taiwan Semiconductor Manufacturing Co Ltd

Plant and Process Engineer IV - Nuclear Auxiliary Systems X Energy LLC

Process Engineer AstraZeneca Plc

Process Engineer - Drug Product Precigen Inc

Lead Metallurgical Process Engineer — Metallurgy and Heavy Forging The Nuclear Company

Business Process Engineer 2 CACI

Business Process Engineer 2 CACI International Inc

Development Support Process Engineer Peraton

Chemical Engineer U.S. Department of Homeland Security

Senior AI/ML Process Engineer AGE Solutions

Manufacturing Process Engineer Altus Technology Solutions

Process Engineer - Branchburg, NJ AHU Technologies

Process Engineer Relish Labs LLC

Development Support Process Engineer Peraton Inc

Water Treatment Process Engineer PBS Engineering and Environmental Inc.

Business Process Engineer- National Capital Region (NCR); Must have an active TS/SCI Clearance with Polygraph Synertex LLC

Entry Level:. We're looking for a Business Process Engineer with a background in process modeling, operational analysis, and IT lifecycle optimization to support critical federal and intelligence community initiatives.

Electronics Parts, Materials, and Processes Engineer - Advanced Packaging The Aerospace Corp

Sr. Process Engineer (Development Support) Themis Insight

Senior Process Engineer Athletes Global Corporation

Chemical Engineer X Energy LLC

RMF Process Engineer - Senior AGE Solutions

AI Business Process Engineer Jasint Consulting And Technologies, Llc

Business Process Engineer - Skill Level 2 Kaizen Approach, Inc.

AI Business Process Engineer JASINT

Sr. Process Engineer Huntington Ingalls Industries Inc

Signal Processing Engineer, Space Anduril Industries Inc

Signals Processing Engineer III Prosync

Signal Processing Engineer Leidos Holdings Inc

Sr. Process Engineer Company Confidential

Senior Process Engineer AHU Technologies

Signals Processing Engineer AeroVironment Inc

Signal Processing Engineer Johns Hopkins University Applied Physics Laboratory LLC

C++ / CUDA Signal Processing Engineer Parsons

Signal Processing Engineer Johns Hopkins Applied Physics Laboratory

New College Grad - RAM Shift Process Engineer Micron Technology Inc

Process Engineer - Packaging ASR Group International Inc

New College Grad - RAM Shift Process Engineer Micron

As a Metrology Operations Shift Engineer at Micron Technology, Inc. in Manassas, VA (MTV), you will be responsible for investigating, improving and maintaining measurement recipes within the Metrology department.

Senior Process / Production Engineer Applied Research Associates, Inc

Staff Process Engineer - Change Control, Center of Excellence Integra LifeSciences Holdings Corp

Signal Processing Engineer StratAcuity Staffing Partners Inc

Similar Job Searches