UNKNOWN

FEED

Akima Infrastructure Services, LLC (AIS), is actively seeking Engineering, Professional, Technical, and administrative support personnel as part of our staff augmentation team supporting the Department of Energy at the Y‑12 National Security Complex located in Oak Ridge, Tennessee and the Pantex Plant located in Amarillo, Texas. Successful candidates will be employees of AIS, a premier government contractor charged with employing highly motivated and well-qualified personnel who can advance Y-12's core mission to ensure a safe, secure, and reliable U.S. nuclear deterrent, which is essential to national security.

NANA Regional Corporation Inc

System Engineer, Level III

linkup_via_bold

RESPONSIBILITIES: Lead a team of engineers and work in a team environment with other engineering disciplines to provide detailed electrical design and specifications for the installation of the following equipment and systems: electrical power distribution systems for power generation plants, switchgear and motor control centers, plant and yard lighting, power plant control systems and ladder logic, uninterruptible power supply (UPS) units, standby, emergency, and black-start generators, automatic transfer switches, power monitoring hardware and software, plant communications, control network, and wiring, plant and equipment grounding systems, and fire alarm systems and lightning protection systems. Provide engineering support for the design, operation, and troubleshooting of all power plant electrical components and systems, including: load flow analysis of electrical power distribution systems, electrical equipment evaluation, plant and equipment grounding, and power monitoring hardware and software.

Twitter

Lead Engineer, Power Generation - Memphis

ea_via_bold

RESPONSIBILITIES: Own end-to-end civil and land development engineering for hyperscale data center campuses, power generation sites, turbine support areas, transformer yards, and industrial infrastructure - delivering complete site grading, stormwater management, underground utilities, and environmental compliance solutions on aggressive schedules. Provide expert civil input during site selection, geotechnical investigations, feasibility studies, and due diligence for data center and power generation projects, with particular focus on environmental constraints, floodplain risks, underground utilities, and industrial site challenges.

Civil Engineer - Memphis

Foreign nationals who are citizens of countries that are not on the Department of Energy's general authorization list (link below) are not permitted to work in our facility unless the Department of Energy issues an export control license to the company to permit that individual to have access to Part 810-controlled information. Kairos Power is seeking an Electrical Engineer to support the design, development, analysis, and implementation of electrical distribution and switchyard systems for an advanced nuclear power plant as part of the Instrumentation, Controls & Electrical (IC&E) department.

YEAR

Kairos Power

Electrical Engineer, Plant Electrical Systems

GreenHouseAPI

Subcontractor will provide technical integration, leadership, guidance, and direction to other multi-disciplined engineering teams as requested for high profile plant initiatives and will appropriately apply ASME Nuclear Quality Assurance (NQA-1) requirements for work in nuclear facilities; plan and direct the engineering activities on projects; establish detailed project design scope, budgets, and schedules; professionally coordinate engineering efforts with Production, Maintenance, Project Management, Construction, Startup, and Project Controls personnel; and review project engineering progress against approved schedules and take corrective action when required. Akima Infrastructure Services, LLC (AIS), is actively seeking Engineering, Professional, Technical, and administrative support personnel as part of our staff augmentation team supporting the Department of Energy at the Y‑12 National Security Complex located in Oak Ridge, Tennessee and the Pantex Plant located in Amarillo, Texas.

Project Engineer, Level III

Plans and performs work requiring a thorough knowledge of electrical/electronic and mechanical theories and principles, writing specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment. May troubleshoot and repair mechanical, hydraulic, pneumatic and electrical/electronic equipment including but not limited to programmable controls, numeral controls, power supplies, drives, gages and test equipment.

Rider Solution

Process Engineer

sourcestack_via_bold

ADAPTED_NOW

You'll play a key role in tracking performance indicators such as operational uptime, mean time between failures, and preventive maintenance, particularly focusing on the plant's electrical and automation systems. Your expertise will be pivotal in troubleshooting and resolving critical manufacturing challenges related to electrical controls within systems such as E-Beam, tension control, and mixing systems.

Aminov Search Partners

Controls Engineer

This role is responsible for designing, sustaining, and improving equipment reliability, asset performance, and engineering rigor to ensure the plant's ability to maintain Most Valued Partner Status with our customers, while working collaboratively with the Pole Plant Leadership team. Electric Research and Manufacturing Cooperative, Inc. (ERMCO) is the leading manufacturer of distribution transformers and engineered electrical solutions, serving electric utilities, Original Equipment Manufacturers (OEMs), and industrial customers across North America.

ERMCO Components Inc

Reliability and Maintenance Engineering Manager Manufacturing

OTHER

Responsible for proper handling, storage, packing, preservation and delivery of both material and product paper work instructions plans utilizing TS16949 & ISO14001 documented systems and authority to initiate appropriate action necessary to prevent non-conformance to customer specifications. Through our robust product engineering, outstanding tooling capabilities and diverse process expertise, we continue to bring lightweight and innovative products to market.

We are a leading global automotive supplier with 347 manufacturing facilities and 94 product development, engineering and sales centres in 27 countries. We have over 159,000 employees focused on delivering superior value to our customers through innovative processes and World Class Manufacturing.

Magna International, Inc

Customer Quality Engineer

Broadbean

As our CEO states, "Expertise and talent come in many forms, and a diverse workforce enhances our ability to think differently and solve the complex challenges of our industry". We update p-BoM and o-BoM, create routings and make sure the BoM is available well before production start either in NPI phase or Tech Transfer and serial production.

Vestas

ECM Engineer

PART_TIME

We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. The individual should be capable of performing the technical design and/or hydraulic modeling requirements on water/wastewater projects and collaborate with our team of engineers, EIT’s, CADD technicians, and sub consultants, to successfully execute these types of projects.

Ardurra Group, Inc.

Water/Wastewater Project Manager

Plant equipment includes the following: (2) 7.8 MW Solar Taurus 70 gas turbine generators with associated Rentech 161 KPPH Heat Recovery Steam Generator's with Duct Burners and Fresh Air Firing capability, (4) 75,000 MBH, and (1) 2,000 MBH steam to hot water heat exchangers, economizers, deaerators, boiler feed water pumps, condensate pumps. Must have knowledge of utility plant mechanical and electrical equipment, including gas turbines, HRSG's, motors, pumps, cooling towers, chillers, fluid systems, chemical handling, water treatment systems, pollution control equipment, AC/DC electrical distribution, control systems, and associated maintenance functions.

HOUR

DTE Energy Co

O&M Technician Lv 4

MS Technology, Inc. is seeking a Mechanical Engineer, P.E. with facility (e.g., piping/plumbing design, HVAC, facility utilities) and/or system (e.g., skids, pump systems, hydraulics/pneumatics) design experience to support complex nuclear and industrial projects. Location: Onsite and/or Hybrid in Oak Ridge, TN Salary Range: Depending on Experience Responsibilities: Support system and mechanical engineering design activities for complex industrial and nuclear projects.

MS Technology, Inc.

Mechanical Engineer, P.E.

The Electrical Project Engineer provides owner-side oversight of major electrical capital projects in heavy industrial environments, ensuring safe, reliable and efficient execution from engineering through construction, testing and commissioning. This role focuses on reviewing and validating electrical engineering packages, coordinating resources and schedules, and mitigating execution risks for substation, transformer and industrial power distribution projects across multiple sites.

Actalent Inc

Hybrid - Electrical Project Engineer

Utilize a consultative sales approach to conduct sales calls with key decision makers to include commercial property owners, facility engineers, plant managers, maintenance supervisors, general contractors, engineers, architects, and owner/developers. Education, Training, Licenses and/or Certifications: Prior sales experience working within the construction or mechanical service industry a strong plus – inclusive of subcontractors, general contractors, and equipment maintenance/retrofit providers.

ConServ Building Services

HVAC Sales Representative

Based on the rotation path these are items you could be doing: Order Management: Accurately process switchboard orders and prepare manufacturing documentation using tools such as Bid Manager, AutoCAD, and Plant Order Manager. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.

Eaton is a power management company with 2016 sales of $19.7 billion. We provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technologies and services. Eaton has approximately 95,000 employees and sells products to customers in more than 175 countries. For more information, visit <a href="http://www.eaton.com/Eaton/index.htm" target="_blank">Eaton.com.</a>

Eaton Corporation Plc

Development Program: Operations Engineering

Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. Promote efficiency in all aspects of the building, including uptime, labor hours, repairs, and PM completion, tracked and evaluated against enterprise and national benchmarks.

PEAK Technical Services Inc.

Maintenance Mechanic - Direct

jobdiva

BWX Technologies, Inc. and its affiliates and subsidiaries (BWXT) is not responsible for and does not accept any liability for fees or other costs associated with resumes or candidates presented by recruiters or employment agencies, unless a binding, written recruitment agreement between BWXT and the recruiter or agency exists prior to the presentation of candidates or resumes to BWXT and includes the specific services, job openings, and fees to be paid ("Agreement"). A U.S.-based company, BWXT is a Fortune 1000 and Defense News Top 100 manufacturing and engineering innovator that provides safe and effective nuclear solutions for global security, clean energy, environmental restoration, nuclear medicine and space exploration.

<p>At BWX Technologies, Inc. (NYSE: BWXT), we are People Strong, <em>Innovation Driven</em>. Headquartered in Lynchburg, Virginia, BWXT is a Fortune 1000 and Defense News Top 100 manufacturing and engineering innovator that provides safe and effective nuclear solutions for global security, clean energy, environmental restoration, nuclear medicine and space exploration. With approximately 6,700 employees, BWXT has 14 major operating sites in the U.S., Canada and the U.K. We are the sole manufacturer of naval nuclear reactors for U.S. submarines and aircraft carriers. Our company supplies precision manufactured components, services and fuel for the commercial nuclear power industry across four continents. Our joint ventures provide environmental restoration and nuclear operations management at more than a dozen U.S. Department of Energy and NASA facilities. BWXT’s technology is driving advances in medical radioisotope production in North America and microreactors for various defense and space applications. Follow us on Twitter at @BWXT and learn more at <a href="http://www.bwxt.com">www.bwxt.com</a>.</p>

BWX Technologies Inc

Senior Project / Construction Manager - US Projects (Remote)

We provide customers with a wide range of full-service support from black-box design concepts to highly engineered composites, TPE's and TPO's as well as specialized extrusion and compression technologies. Our Tool Room Technicians are responsible for providing tool build and repair support to achieve optimal levels of productivity, quality, and safety assuring internal and external customer satisfaction.

US Farathane Corporation

Tool Room Technician

While reporting to the Plant Engineer- Presidents Island Memphis, the Industrial Electrician/Instrumentation Tech will be responsible for achieving a high level of reliability for plant equipment through performing tasks to reduce machine downtime and enable the facility to perform at optimum levels. From a small family business to a multi-billion dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of "People Build Businesses" alive.

Plant Engineer Jobs in Tennessee

System Engineer, Level III NANA Regional Corporation Inc

Lead Engineer, Power Generation - Memphis Twitter

Civil Engineer - Memphis Twitter

Electrical Engineer, Plant Electrical Systems Kairos Power

Project Engineer, Level III NANA Regional Corporation Inc

Process Engineer Rider Solution

Controls Engineer Aminov Search Partners

Reliability and Maintenance Engineering Manager Manufacturing ERMCO Components Inc

Customer Quality Engineer Magna International, Inc

ECM Engineer Vestas

Water/Wastewater Project Manager Ardurra Group, Inc.

O&M Technician Lv 4 DTE Energy Co

Mechanical Engineer, P.E. MS Technology, Inc.

Hybrid - Electrical Project Engineer Actalent Inc

HVAC Sales Representative ConServ Building Services

Development Program: Operations Engineering Eaton Corporation Plc

Maintenance Mechanic - Direct PEAK Technical Services Inc.

Senior Project / Construction Manager - US Projects (Remote) BWX Technologies Inc

Tool Room Technician US Farathane Corporation

Industrial Electrician Sonoco Products Co,

Similar Job Searches

Stand out to leading employers.