SENIOR CONTROLS ENGINEER Gables Search GroupSENIOR CONTROLS ENGINEERBuffalo, NY$85,500–$123,200 / yearOwn Key Elements for systems related to power and control system such as electrical safety (LOTO, Electrical PPE, Energized work permits, low voltage qualification, etc.) and Quality/CCP compliance (checkweighers, metal detectors, vision systems, ingredient flows, temperatures, etc.). Provide key leadership with regard to power and control systems, equipment specification and maintenance, proper operation, technician development, troubleshooting and repair to achieve or exceed reliability targets the plant.
Standard Plant Engineer Linde plcStandard Plant EngineerTonawanda, NYPosition Overview: The On-Site Plant Engineer is a field focused engineering and operations support member for the LGUS On-Site Plant operations organization. The opening location is flexible.
Sr Operations Engineer-Pilot Plant Solstice Advanced Materials IncSr Operations Engineer-Pilot PlantBuffalo, NY$115,000–$159,000 / yearPartnering with over 3,000 customers across more than 120 countries and territories and supported by a robust portfolio of over 5,700 patents, Solstice's approximately 4,000 employees worldwide drive innovation in materials science. Advanced R&D Engineer here at Solstice Advanced Materials, you will be accountable for conducting advanced research and development activities in a Pilot Plant operations environment to drive innovation and deliver cutting-edge solutions.
Skilled Trade - Stationary Steam Engineer - Buffalo Stamping Plant (BSP) Ford Motor CoSkilled Trade - Stationary Steam Engineer - Buffalo Stamping Plant (BSP)Buffalo, NYCandidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade.
HVAC & Boiler Plant Manager AramarkHVAC & Boiler Plant ManagerBuffalo, NY$85,000–$90,000 / yearRelentless commitment to safety excellence, demonstrates behaviors that drive a Safety-FIRST core value, fosters a culture where every team member is empowered & supported to achieve a work environment without exposures and incidents - where No One Gets Hurt. Working knowledge and appropriate preventive/preventative maintenance of building systems (i.e., boilers, chillers, generators, heating, ventilation and air conditioning (HVAC/R), electrical, plumbing and mechanical.).
Hvac & Boiler Plant Manager Aramark Corp.Hvac & Boiler Plant ManagerBuffalo, NY$85,000–$100,000 / yearThe HVAC & Boiler Plant Manager is responsible for supervising all unit activities related to facility maintenance and engineering services; HVAC, Boiler house and day to day maintenance. Relentless commitment to safety excellence, demonstrates behaviors that drive a Safety-FIRST core value, fosters a culture where every team member is empowered & supported to achieve a work environment without exposures and incidents - where No One Gets Hurt.
Director of Electrical/Thermo Plant Seneca Gaming CorporationDirector of Electrical/Thermo PlantNiagara Falls, New YorkThe Director of Electrical/Thermo Plant shall be responsible for planning, managing and executing all maintenance and upgrades for the buildings on the footprint of Seneca Niagara Resort and Casino including the casino, hotel, Thermo plant and Seneca office building. The Electrical/Thermo Plant Director shall be responsible for developing the electrical service business lines, securing and managing project for Quoted and T&M electrical services delivered to the Casino and Hotel and associated buildings.
NewDirector of Electrical/Thermo Plant Seneca Resorts and CasinosDirector of Electrical/Thermo PlantNiagara Falls, NYThe Director of Electrical/Thermo Plant shall be responsible for planning, managing and executing all maintenance and upgrades for the buildings on the footprint of Seneca Niagara Resort and Casino including the casino, hotel, Thermo plant and Seneca office building. The Electrical/Thermo Plant Director shall be responsible for developing the electrical service business lines, securing and managing project for Quoted and T&M electrical services delivered to the Casino and Hotel and associated buildings.
Director Of Electrical/Thermo Plant Seneca ResortsDirector Of Electrical/Thermo PlantNiagara Falls, NYThe Director of Electrical/Thermo Plant shall be responsible for planning, managing and executing all maintenance and upgrades for the buildings on the footprint of Seneca Niagara Resort and Casino including the casino, hotel, Thermo plant and Seneca office building. The Electrical/Thermo Plant Director shall be responsible for developing the electrical service business lines, securing and managing project for Quoted and T&M electrical services delivered to the Casino and Hotel and associated buildings.
Plant Maintenance Mechanic-Industrial Operations, 1st Shift Hours, $36.46-$38.43,Wheatfield, NY Compagnie de Saint-GobainPlant Maintenance Mechanic-Industrial Operations, 1st Shift Hours, $36.46-$38.43,Wheatfield, NYwheatfield, NY$36.46–$38.43 / hourThey allow access to information such as the characteristics of your terminal or certain personal data (IP addresses, navigation data on the Saint-Gobain site, etc.) for the following purposes: analysis and improvement of the user experience and/or our offer of content, products and services; audience measurement and analysis; interactions with social networks; display of advertising and personalized content. Complete pipefitting work including running air/water lines, low-pressure pipe welding, rebuilding hydraulic cylinders/pumps/valves, setting up regulator systems, pressure testing, and building hydraulic hoses/lines.
Plant Maintenance Mechanic Compagnie de Saint-GobainPlant Maintenance MechanicNiagara Falls, NYComplete pipefitting work including running air/water lines, low-pressure pipe welding, rebuilding hydraulic cylinders/pumps/valves, setting up regulator systems, pressure testing, and building hydraulic hoses/lines. Applicants for roles based in Washington state or remote roles that would be worked from Washington state are encouraged to direct any concerns regarding the state's Pay Transparency laws to the SGNA HR Compliance team at SGNA_HR_Compliance@saint-gobain.com.
Associate Architect, Plant Srvs & School Planning - Perm/Prov. RB 25-545 Buffalo Public SchoolsAssociate Architect, Plant Srvs & School Planning - Perm/Prov. RB 25-545Buffalo, NY$86,200–$104,882 / yearConfers with professional Architectural and Engineering firms and departmental administrators and engineers, concerning the planning, design and construction of a wide variety of building projects; Supervises the preparation of or may be involved in the preparation of design activities, plans and specifications for the construction, repair or alteration of public buildings, including schools, fire and police stations, public housing structures, etc; coordinates design work with consulting professionals and specialists in many related occupations, i.e., structural, mechanical, electrical, plumbing, heating and ventilating, sanitary engineers, etc. prepares preliminary studies relative to size of building, number of rooms, room capacity, orientation of rooms and presents such studies to agency administrators responsible for supervising the development of designs and plans; prepares or supervises preparation of specifications for materials and equipment; directs drawing of final plans.
Plant Operator B AlkegenPlant Operator BBuffalo, New YorkWith over 60 manufacturing facilities with a global workforce of over 9,000 of the industry’s most experienced talent, including insulation and filtration experts, Alkegen is uniquely positioned to help customers impact the environment in meaningful ways. Alkegen brings together two of the world’s leading specialty materials companies to create one new, innovation-driven leader focused on battery technologies, filtration media, and specialty insulation and sealing materials.
Plant Process Control Technician DuPont de Nemours Inc.Plant Process Control TechnicianBuffalo, NYYerkes Buffalo is the North American manufacturing home of Corian solid surface products, introduced in 1968 and the founding manufacturing location for Tedlar polyvinyl fluoride (PVF) films, introduced in 1961. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world.
Pilot Plant Operator Solstice Advanced Materials IncPilot Plant OperatorBuffalo, NYAdditional Requirements: Physical requirements: Must be able to move up to 600-pound drums and 250-pound gas cylinders utilizing appropriate handling equipment, lift and carry up to 35 pounds, climb ladders and scaffolding, wear required PPE and respiratory equipment as directed, and work rotating shifts to support 24-hour operations both 5 and 7 days per week. Requires education and/or experience in typical chemical plant equipment including piping, valves, pumps, tubing, instruments, high pressure and low vacuum equipment, glass and polymer lined equipment, vacuum systems, and various filtration equipment.
Process Engineer DuPont de Nemours Inc.Process EngineerBuffalo, NYDuPont Run Plant Engineers serve as a vital resource for Operations by applying technical skills to optimize plant operations, resolve plant problems, and enable safe and efficient production of low cost, quality products. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world.
OSP Engineer inSync StaffingOSP EngineerBuffalo, NYThis includes planning and overseeing the installation of cables, conduits, poles, and related equipment that connect homes and businesses to the broader network. You will be responsible for designing, implementing, and maintaining the physical infrastructure needed for telecommunications networks outside of buildings.
Senior P&C Engineer Tetra Tech IncSenior P&C EngineerBuffalo, NY$140,000–$190,000 / yearEssential Job Functions: Lead the design and development of protection and control (P&C) systems for transmission, distribution, and renewable energy projects, including AC/DC schematics, single-line diagrams, wiring diagrams, relay logic diagrams, relay panel layouts, and communication network diagrams. With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition.
ROC Engineer Linde plcROC EngineerTonawanda, NYLead shift operators alongside Lead Technician, liaising with ROC management. Serve as primary contact for plant operation questions; be on-call for assigned plants.
Electrical Engineer - BESS Sungrow Power Supply Co LtdElectrical Engineer - BESSBuffalo, NY$80,000–$120,000 / yearEducation or Desired License and Certificates: 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors. Essential Duties and Responsibilities: Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies.
Process Development Engineer Nesco Resource, LLCProcess Development EngineerBuffalo, NY$43–$62 / hourThe ideal candidate has experience working closely with manufacturing plants, leading process improvements, optimizing production systems, and supporting innovative food products through every stage of development. This is an exciting opportunity for an engineer with a strong background in food manufacturing, process development, pilot plant operations, and new product commercialization who enjoys collaborating across R&D, Manufacturing, Marketing, and Operations.
Mechanical Engineer The GOR GroupMechanical EngineerBuffalo, New YorkThis position is ideal for an engineer with approximately five to eight years of experience who enjoys doing the technical work, building detailed Revit models, producing coordinated construction documents, and solving practical design challenges. They are a technically capable doer who takes ownership of assigned systems, pays close attention to model quality, and enjoys turning engineering concepts into detailed, constructible designs.
Electrical Engineer Encorus GroupElectrical EngineerDepew, NYFull timeCoordinate with internal and external partners—including cross-discipline teams, construction teams, vendors, fabricators, and owners—to address electrical-related issues or concerns. Independently handle projects of moderate size and complexity while supporting senior engineers on larger or more complex projects.
Staff Water Engineer Arcadis NVStaff Water EngineerBuffalo, NY$90,000–$132,000 / yearRole description: As a Staff Wastewater Engineer, you will be critical in driving client development and strategic positioning while creating compelling proposals and presentations for water and wastewater design projects. Your responsibilities will include leading clients and projects through water and wastewater treatment plants planning, design, and construction phases, distribution and collection systems, and pump and lift stations.
Sr. Substation Protection & Control Engineer WSP Global IncSr. Substation Protection & Control EngineerBuffalo, NY$83,200–$145,530 / yearWSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location. Developed critical thinking and problem-solving skills required to apply technical knowledge to reach conclusions from testing results, data collation, statistical analysis and arriving at the most effective, economical, and logical solution.
Staff Industrial & Production Planning Engineer Tesla IncStaff Industrial & Production Planning EngineerBuffalo, NY$122,400–$183,600 / yearChallenge and integrate supply-demand inputs by interrogating assumptions with a holistic understanding of the full supply-demand-production process and macroeconomic context; collaborate with Supply Chain Planning to incorporate capacity, mix, and logistics constraints using Theory of Constraints and optimization techniques. Drive layout engineering and facility optimization, providing guidance on production area design, material flow paths, construction phasing, facility expansion, greenfield design, and efficient cost tracking frameworks for engineering and site operations.
Mechanical Engineer The GOR Group, LLCMechanical EngineerBuffalo, New York$130,000–$150,000 / yearThis position is ideal for an engineer with approximately five to eight years of experience who enjoys doing the technical work, building detailed Revit models, producing coordinated construction documents, and solving practical design challenges. They are a technically capable doer who takes ownership of assigned systems, pays close attention to model quality, and enjoys turning engineering concepts into detailed, constructible designs.
Utilities & Environmental Project Engineer Lactalis American Group, Inc.Utilities & Environmental Project EngineerBuffalo, NY$80,000–$100,000 / yearKey responsibilities for this position include: Perform audits of the manufacturing plants for the utility areas and Wastewater Treatment Plants, Inventories all equipment with all their specifications, Survey the plant utility & WWPT needs, Evaluates installed systems capacity versus needs, Develop drawings, scopes of work, budgets and timelines as needed to prepare a project for submittal. Ability to audit, investigate and improve manufacturing process machinery, Effectively communicate to internal and external customers, Prioritization, organization, time management, and follow-up skills, Continuous improvement mindset, Ability to work with minimum supervision, Ability to travel to plant and machine manufacturers sites nationally and internationally.
Lead Process Engineer SPX Flow IncLead Process EngineerNY$88,000–$122,260 / yearActively managing team members to meet schedule demands and target on-budget execution (in terms of hours), whilst still ensuring delivery of a thoroughly engineered, complete design. In general, the Process Engineer will work as part of a team and will collaborate closely with other team members and functional disciplines to ensure successful delivery of the project or bid scope.
Quality Engineer Progressive StaffingQuality EngineerNorth Tonawanda, New YorkAll employees and applicants, please know that you have access at all times to New York State and Federal Labor Laws and Posters at the Government Agency websites: https://dol.ny.gov/posting-requirements-0 ; https://www.dol.gov/general/topics/posters#workplace-posters . Develop Corrective Action plans by performing root cause analysis, creating short-term action plans, and implementing long-term corrective action plans.
Validation Engineer III ImmunityBio IncValidation Engineer IIIDunkirk, NYLead and perform validation activities for equipment, utility systems, facilities, processes, and automation systems in compliance with approved SOPs, cGMPs, and applicable regulatory requirements, Generate and execute validation protocols (IQ/OQ/PQ/CV/PV) of all site equipment including laboratory equipment, production equipment, utilities (as applicable) and other related systems in an FDA regulated environment, Author and review SOPs, protocols, reports, and validation master plans for GMP equipment, instruments, and computerized systems, Generate and keep current inventory of GMP systems and requalification/revalidation schedules, Perform risk assessments for GMP systems as required, Plan validation efforts according to risk, Collaborate with clients, CMO's, and vendors to meet project and company objectives, Own the communications process with vendors. Lead audits and regulatory agency inspections for Validation, Serve as subject matter expert in areas of IQ/OQ/PQ at a minimum, Oversee contractors, projects and timelines, Coordinate multiple projects and shifting priorities, Train end users on validation policies and requirements to support GMP operations, Provide validation assistance to other departments and perform any additional responsibilities as requested or assigned, Perform ad-hoc and cross-functional duties and/or projects assigned to support business needs and provide developmental opportunities.
Electrical Engineer Linde plcElectrical EngineerTonawanda, NYComplete specifications for quoting and requisitioning for electrical equipment including but not limited to: transformers, switchgear, variable frequency drives, MCCs, and fuse contactors. Develop innovative solutions to solve difficult problems; anticipates problems and develops contingencies.
Industrial Engineer/Analyst Universal Stainless & Alloy Products, Inc.Industrial Engineer/AnalystDunkirk, NYPartner with Plant Leaders to develop Continuous Improvement strategies that close key business gaps identified in Plant, then implement those strategies on the shop floor including the tools and processes required to sustain the improvements in the future. ORGANIZATIONAL RELATIONSHIPS: The Project Engineer Analyst will report directly to the NJX General Manager, and work directly with other Management Team Members, as well as interact with members of Operations, Technology, Quality, Accounting, and Production Control.
Controls Engineer 3 KYYBA, IncControls Engineer 3Buffalo, NYFounded in 1998 and headquartered in Farmington Hills, MI, Kyyba has a global presence delivering high-quality resources and top-notch recruiting services, enabling businesses to effectively respond to organizational changes and technological advances. The team will serve as the plant Subject Matter Experts (SMEs) for new Autonomous Mobile Robots (AMRs), and fleet management systems being introduced to improve material flow and production efficiency.
Advanced Control Systems Engineer Linde plcAdvanced Control Systems EngineerTonawanda, NYFurther, you will participate in the execution of the commissioning of the primary control systems, e.g., simulation testing, startup, tuning, auto restart, and supervisory control in the field. You will contribute to the continued success of Linde's global leading VPSA (oxygen) and N-plant (nitrogen) product line plants.
Process Development Engineer On-Board CompaniesProcess Development EngineerBuffalo, NY$40–$62 / hourThis maternity role focuses on supporting current short- to mid-term projects (13 year timeline) and serves as the engineering technical lead on these projects, involving process and product innovation, renovation, optimization, and cost savings across assigned product categories. Today, On-Board is a thriving privately held family of companies with services including: Consulting, Professional Engineering, Industrial Maintenance and Facility Management, Contracted Manufacturing and Production Services, as well as Temporary Staffing and Recruiting throughout North America.
Manufacturing Engineer Moog IncManufacturing EngineerBuffalo, NY$85,000–$110,000 / yearAs the Manufacturing Engineer, you will prepare detailed manufacturing instructions and programming data to produce machined parts and to meet engineering drawings and specifications. Prepare detailed operation sheets and N/C programs, making estimates of setup, and run hours for production parts, and estimating design and build hours for tooling.
Senior Manufacturing Engineer MoogSenior Manufacturing EngineerBuffalo, New YorkAs the Senior Manufacturing Engineer, you will prepare detailed manufacturing instructions and programming data to produce machined parts and to meet engineering drawings and specifications. Prepare detailed operation sheets and N/C programs, making estimates of setup, and run hours for production parts, and estimating design and build hours for tooling.
NewProcess Engineer The J.M. Smucker CoProcess EngineerBuffalo, NY$70,500–$101,200 / yearLead material and packaging improvements which could include managing material changes, qualifying alternate materials, delivering material cost savings, or participating in new product launches. Additional skills and experience that we think would make someone successful in this role: Engineering focused experience (this could include internship and/or co-op experience).
Controls Engineer ICONMA, LLCControls EngineerBuffalo, NY$42.37–$45.53 / hourThe team will serve as the plant Subject Matter Experts (SMEs) for new Autonomous Mobile Robots (AMRs), and fleet management systems being introduced to improve material flow and production efficiency. Responsibilities: This Controls Engineer position supports a machine-intensive, high-volume production environment within a small, specialized engineering team responsible for the rollout and support of next-generation manufacturing technologies.
NewEnvironmental Engineer GMEnvironmental EngineerBuffalo, New YorkGrow to understand the plant manufacturing systems including production processes, wastewater discharges, storm water management, air emissions impacts, sewer systems, chemical usage, and waste management/recycling programs, to ensure effective decision-making and regulatory compliance. Responsible for developing/maintaining/supporting robust and consistent environmental stewardship program strategies in support of GM’s mission to deliver sustainable solutions that improve the communities in which we live and work.
Quality Engineer Eaton Corporation PlcQuality EngineerOrchard Park, NY$71,000–$105,000 / yearWhat you'll do: The Quality Engineer will drive risk mitigation, quality improvement initiatives, root cause and corrective action, and lead quality engineering support for assigned Integrated Product Team (IPT) and product lines. Highly developed human relations, communications, and internal consulting skills necessary to establish and maintain effective work relationships with the various plant functions, customer, and supplier personnel.
Electrical Engineer WielandElectrical EngineerBuffalo, New York$85,000–$105,000 / yearParticipate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, ISO 9001, IATF 16949 programs and procedures though active participation in the near miss program. The final pay offered to a successful candidate will be based upon various factors unique to each individual that may include but are not limited to years of experience, industry knowledge, technical skills, education, qualifications, etc.
Senior OES Process Engineer Linde plcSenior OES Process EngineerTonawanda, NYAnd you will identify, evaluate, and implement productivity improvement, cost reduction, and continuous improvement initiatives to enhance plant safety, reliability, efficiency, and performance. Collaborate with operations technicians, plant management, regional operations teams, logistics planners, and support personnel.
Engineer- Manufacturing/Tooling Shively Diversified Management ServicesEngineer- Manufacturing/ToolingTonawanda, NYAs part of our team, you are responsible for identifying new methods, resolving problems, achieving cost savings, and working with internal teams to ensure production runs smoothly and safely. 5 years of experience working in production machining, a bachelor’s degree in mechanical engineering, or experience working in a closely related technical field is preferred.
Controls Engineer (SCADA) iMPact Business GroupControls Engineer (SCADA)Buffalo, NYThis is a hands-on, high-impact position supporting a modern extrusion and polymer manufacturing operation focused on innovation, automation, and operational excellence. This role will play a key part in optimizing plant performance through advanced controls, system integration, and continuous improvement initiatives.
Controls Engineer Optimal Inc.Controls EngineerTonawanda, NYContractorRequirements: Bachelor's degree in Engineering 2-4 years of experienceTop Skills:PLC Troubleshooting & Controls Systems ExpertiseStrong troubleshooting experience with Siemens PLCs and Allen-Bradley/Rockwell controlsAbility to read, interpret, and diagnose PLC logic, automation faults, and production equipment issuesExperience supporting HMIs and manufacturing controls systems in a high-volume production environmentIndustrial Automation & RoboticsExperience supporting and troubleshooting Fanuc Robots/CobotsKnowledge of automated material handling systems and robotic integrationExposure to automation commissioning, startup support, validation, and production launchesAutonomous Mobile Robots (AMRs) & Advanced Manufacturing TechnologyExperience with strong aptitude to support AMRs, fleet management systems, and automated material movementUnderstanding of Industry 4.0 technologies, automated logistics, and smart factory initiativesFamiliarity with systems such as OTTO AMRs, automated forklifts, or similar autonomous technologies is highly desirable Focus will be GPS - Engine Assembly and MachiningSiemens PLC, HMI, Rockwell Global Common Cameras - Cognex AI, Dalsa, Matrox Fanuc Robot/Cobot AMR OTTO and Bastian Auto Fork Truck Procurement and implementation of new equipment.
Senior Civil Engineer GHD Group Pty LtdSenior Civil EngineerBUFFALO, NYThis role will provide you the opportunity to participate in the planning, design and construction engineering of exciting and diverse water, wastewater, utilities, infrastructure, and site-development projects for our wide range of municipal and private clients with a key focus on linear infrastructure and contribute to the growth in an emerging geographic market. While this position is based in the US Northeast region, you will have the flexibility to focus on the local market and/or become engaged in major projects worldwide supporting design operations from Australia to Europe working with diverse design teams from across the globe.
Improvement Engineer Olin CorporationImprovement EngineerNiagara Falls, NY$109,884–$143,568 / yearFocus: The Improvement Engineer is responsible for leading the plant-level improvement process by gathering and analyzing data, evaluating improvement opportunities, and implementing improvement projects while ensuring plant improvements align with business objectives. Improvement Engineer Essential Responsibilities: Leads continuous improvement efforts through data analysis, defining project scope, and prioritizing process improvement opportunities.
Process Development Engineer II Integer Holdings CorpProcess Development Engineer IIClarence, NY$72,000–$105,600 / yearYou embrace the Manufacturing Excellence culture based on the Integer Production System and its five focus areas: Strategy Alignment through Site Hoshin Plans, the regular cadence of Sales, Inventory, and Operations' Planning (SiOP) meetings, and regular updates to the value stream maps. You adhere to Integer's Values and all safety, environmental, security and quality requirements including, but not limited to: Quality Management Systems (QMS), Safety, Environmental and Security Management Systems, U.S. Food and Drug Administration (FDA) regulations, company policies and operating procedures, and other regulatory requirements.