UNKNOWN

FEED

Review and provide feedback on scopes and specifications as needed for complex projects such as close-interval surveys and other field surveys including remedial actions, stray current testing and mitigation, data interpretation and engineering analysis, cathodic protection design, internal corrosion mitigation system design and monitoring including coupons and solid/liquid/gas sampling analyses, and programs for monitoring, assessment and mitigation of complex corrosion mechanisms such as SCC, high-temperature corrosion and microbiological influenced corrosion. Provide technical expertise and assistance in problem-solving to the field-based corrosion supervisors and corrosion technicians for complex corrosion control issues such as stray current, remedial actions, AC mitigation, atmospheric and underground coatings, electrical isolation, above-ground surveys such as close-interval survey, DCVG and ACVG, design for specialized or complex cathodic protection systems, and internal corrosion monitoring programs.

Kinder Morgan Inc

Corrosion Engineer

linkup_via_bold

Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience or an advanced degree in a related field and minimum 5 years' experience. Our teams integrate optical, opto-mechanical, detector, cryogenic, and systems engineering disciplines to produce high-performance infrared imaging solutions that operate in demanding environments.

RTX Corp

Principal Optical Design Engineer

Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of eight years of prior relevant experience to include any combination of the following: Experience with RF design and fabrication. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Principal RF Design Engineer

Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 2 years of prior relevant experience to include any combination of the following: Experience with RF design and fabrication. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RF Design Engineer II

Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of five years of prior relevant experience to include any combination of the following: Experience with RF design and fabrication. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Senior RF Design Engineer

Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience, or An Advanced Degree in a related field and minimum 7 years experience. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Sr. Principal Low Observable Materials Engineer

In this Systems Engineer role, you may support the following types of activities: Core Systems Engineering: Update, develop, maintain, and improve requirements, Concepts of Operations (CONOPS), and define system interfaces. You'll collaborate across disciplines, from subject matter experts to chief technologists, ensuring systems are designed, integrated, tested, and strengthened to perform flawlessly for our warfighters.

Systems Engineer I - (Onsite)

Systems Engineer II - (Onsite)

Join our organization and experience the Systems engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, chief engineers, chief technologists, the customer, and so many more to ensure we design, integrate, test and strengthen our systems to work the first time and every time for our warfighters! Support Missions: Travel as needed to support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations.

Systems Engineer II

Candidates will collaborate with multi-disciplined design teams across multiple projects to bring design concepts to fruition, providing rapid engineering, fabrication, and prototyping solutions throughout the entire product lifecycle. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Systems Engineer 1

Environmental testing includes mechanical shock, electrodynamic vibration, salt fog, climatic environments such as temperature, altitude, and humidity, high temperature quartz lamp testing, structural testing, test fixture design, and custom instrumentation installations and data acquisition support. Experience working in a product development lab with vibration shaker systems and/or with instrumentation (accelerometers, thermocouples, strain gages, load cells, etc…) and data acquisition systems (Dewetron, DeweSoft, LabView, Agilent/Keysight, Benchlink, Somat, etc…).

Section Lead/Principal Environmental Test Engineer

Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience or An Advanced Degree in a related field and minimum 3 years experience. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Low Observables Materials Engineer

The Mechanical Dimensional Management (DM) Engineer collaborates directly with Mechanical Engineering, Materials and Processes, and Design and Drafting from the Hardware Engineering Team along with Operations, Quality, and Supply Chain peers, and suppliers to implement mechanical producibility improvements on new and emerging programs, and upgrades to existing programs. The Producibility and Dimensional Management (P&DM) section within the CPR department is seeking a Mechanical Dimensional Management Engineer, located onsite in various locations including Tucson AZ, Tewksbury MA, Marlborough MA, and McKinney TX.

Mechanical Dimensional Management Engineer

LADS programs include Global Patriot, Ghost-Eye / Lower Tier Air & Missile Defense, National Advanced Surface-to-Air Missile, Stinger, Next Generation Short-Range Interceptor, TOW, Javelin, Excalibur, and counter unmanned aerial systems. SWQE Tasks - Review of Document Deliverables (CDRL), Command Media (Policies), SW Release Packages (Windchill PDM, Azure DevOps), SW Requirements Changes, SW/System Defects, SW Pulls (Code Reviews), Media, and Test Artifacts.

Software Systems Quality Engineer (Compliance) in AZ

Collaborate with software developers, validation teams, field engineers, and support teams to resolve issues and enhance system performance. Support integration testing involving onboard machine systems, software applications, network infrastructure, and related technologies.

Cintal

Autonomous Systems Validation Engineer (MineStar Command)

sourcestack_via_bold

Experience with Model Based Engineering processes, techniques, and tools (Rhapsody and IBM Rational Model Manager and/or Cameo Systems Modeler/Enterprise Architect and Teamwork Cloud preferred, with understanding of Systems Modeling Language (SysML), and/or Unified Modeling Language (UML). Our engineers are responsible for all elements of the development lifecycle for test including: test requirements, test system design, advanced engineering prototyping technology, flight operations, environmental testing, and environmental characterization.

Test Systems Engineer II (onsite Tucson, AZ)

FULL_TIME

OTHER

Ability to assist in the following tests: Transformer Testing – Power factor, TTR, insulation resistance, SFRA, winding resistance, partial discharge, and leakage reactance. If PPM receives a resume/candidate from a staffing agency or recruiter without a current MSA in place, PPM reserves the right to hire that individual without any legal or financial obligation to a staffing agency or recruiter.

Group CBS

Field Service Specialist - (NOVA / DMV)

silkroad ATS feed

While performing the duties of this job, the employee is frequently exposed to an office environment; and occasionally exposed to manufacturing environment and elements such as odor, noise, dust, heat, cold, chemicals, or some element present which makes conditions less desirable than usually found in an office. EDUCATION AND EXPERIENCE: Bachelor's degree in technical area, (Quality, Engineering or Manufacturing, Aeronautical or Aerospace) preferred or equivalent combination of education and experience.

<p>    Piper Careers | Scholarship Applications | Piper Aircraft                </p>
<div>
<section>
<div>
<div>
<div>
<p>Piper’s worldwide headquarters is based in beautiful Vero Beach, FL., – located just a few miles from the Atlantic Coast.  We are the largest private employer in Indian River County and offer exciting and enriching careers. We aim to be the best. So it’s only natural that we strive to recruit the best people in and to give you every opportunity to become even better. After all, ours is a company that never stands still. That’s why we provide a supportive team-working environment in which each individual’s needs are respected. No matter what role you’re in, you’ll help us make the most of our business. And we’ll help you make the most of your abilities. So, make Piper Aircraft your ultimate destination. Together, we’ll go further than you ever thought possible.</p>
</div>
</div>
</div>
</section>
</div>
<p> </p>

Piper Aircraft Inc

Quality Engineer I (Full Time)

The Company operates the high- grade San Albino gold mine in Nueva Segovia, Nicaragua, which ranks as one of the highest -grade open pit gold mines globally and offers district -scale expl oration potential. Mako US Corp (a subsidiary of Mako Mining Corp.) is currently seeking a qualified person for the position of Senior Process Engineer - Mining Projects.

Mako Mining Corp

Senior Process Engineer - Mining Projects

Candidate will lead in developing and supporting the multi-disciplinary mine stability team through advanced technical practices and problem solving and will demonstrate a strong understanding of rock mechanic principles to help solve complex challenges facing our surface and underground mining clients. Well-developed critical thinking and problem-solving skills required to apply technical knowledge to reach conclusions from testing results, data collation, computations, statistical analysis and arriving at the most effective, economical, and logical solution.

Planning Engineer Jobs in Tucson, AZ

Corrosion Engineer Kinder Morgan Inc

Principal Optical Design Engineer RTX Corp

Principal RF Design Engineer RTX Corp

RF Design Engineer II RTX Corp

Senior RF Design Engineer RTX Corp

Sr. Principal Low Observable Materials Engineer RTX Corp

Systems Engineer I - (Onsite) RTX Corp

Systems Engineer II - (Onsite) RTX Corp

Systems Engineer II RTX Corp

Systems Engineer 1 RTX Corp

Section Lead/Principal Environmental Test Engineer RTX Corp

Low Observables Materials Engineer RTX Corp

Mechanical Dimensional Management Engineer RTX Corp

Software Systems Quality Engineer (Compliance) in AZ RTX Corp

Autonomous Systems Validation Engineer (MineStar Command) Cintal

Test Systems Engineer II (onsite Tucson, AZ) RTX Corp

Field Service Specialist - (NOVA / DMV) Group CBS

Quality Engineer I (Full Time) Piper Aircraft Inc

Senior Process Engineer - Mining Projects Mako Mining Corp

Lead Rock Mechanics Engineer WSP

Similar Job Searches

See More Jobs

Stand out to leading employers.