UNKNOWN

FEED

Designers work with circuit card designers and systems engineers to develop requirements, architect new parts, collaborative modeling of algorithms, partition and perform code development, simulation, and place and route. Designs are implemented using VHDL for the following applications: gigabit serial interfaces, Radio Frequency (RF) and Electro-Optical (EO) DSP, controls, data links, embedded processing and processor interfaces.

RTX Corp

FPGA Design Engineer II

Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of ten years of prior relevant experience to include any combination of the following: RF design and fabrication. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Senior Principal RF Design Engineer

The Effector Analog & Power Design Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Advanced understanding and ability to apply the theory of operation for the unit under test to enable determination of faulty product for design, workmanship, environmental and/or component defects on complex electronics.

Principal Test Engineer

Working with a cross-discipline team, the candidate must have experience developing, testing, and integrating software for edge or embedded devices and/or subsystems (like telecom, medical, IoT, automotive, or robotics) where hardware operation, time critical function, functional reliability, mission assurance, and safety might be major concerns. Our Senior Principal Embedded Real-Time Software Developer/Integrator is a technical position that works in an Integrated Product Team (IPT) environment to architect, design, implement, test, debug, and deploy Software for Firmware (FPGA) and Hardware solutions that meet current and next generation autonomous avionics systems' needs.

Sr Principal Real-time Software Engineer

Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of eight years of prior relevant experience to include any combination of the following: Experience with RF design and fabrication. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Principal RF Design Engineer

The Effector RF Design Department is seeking talented engineers with the skills and passion to develop complex Radio Frequency (RF) systems, subsystems and components, including antennas, RF circuit card assemblies, radomes, and RF test-equipment. Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 2 years of prior relevant experience to include any combination of the following: Experience performing design and analysis for the packaging of RF products (e.g.

RF Mechanical Engineer II

At Raytheon, the Effector RF Design Department is seeking talented engineers with the skills and passion to develop complex Radio Frequency (RF) systems, subsystems and components, including antennas, RF circuit cards, and RF test-equipment. A successful candidate is one who functions in a multi-disciplined team, properly applies engineering tools and processes, and is a self-motivated problem solver with a positive attitude and willingness to learn.

RF Mechanical Engineer I (Onsite)

RF Mechanical Engineer II (Onsite)

Qualifications We Prefer: Ability to identify, reduce and eliminate cost, quality and schedule constraints through technical engagements along with an innovative mindset that drives continuous improvement, lean manufacturing and keeps pace with advances in technology. In this highly visible role, you'll leverage your technical knowledge of manufacturing capabilities, product technologies, factory requirements and business processes to establish and execute the manufacturing plan and influence technical program decisions to support the overall program value stream.

Sr. Manufacturing Development Engineer

What You Will Do: Responsible for hosting and facilitating design reviews and collaborating with a multi-disciplined team which takes Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs from inception to manufacturing. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Product Development Electrical Engineer I (Onsite)

The Company operates the high- grade San Albino gold mine in Nueva Segovia, Nicaragua, which ranks as one of the highest -grade open pit gold mines globally and offers district -scale expl oration potential. Mako US Corp (a subsidiary of Mako Mining Corp.) is currently seeking a qualified person for the position of Mechanical Engineer - Mining Projects.

Mako Mining Corp

Mechanical Engineer - Mining Projects

The Effector-Optics (EO) Department is currently seeking a Principal Cryogenics Systems Design Engineer with design and analysis skills, experience in cryogenics systems, component fabrication, and testing. Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience or an advanced degree in a related field and minimum 5 years' experience.

Principal Cryogenics Design Engineer

Environmental testing includes mechanical shock, electrodynamic vibration, salt fog, climatic environments such as temperature, altitude, and humidity, high temperature quartz lamp testing, structural testing, test fixture design, and custom instrumentation installations and data acquisition support. Experience working in a product development lab with vibration shaker systems and/or with instrumentation (accelerometers, thermocouples, strain gages, load cells, etc…) and data acquisition systems (Dewetron, DeweSoft, LabView, Agilent/Keysight, Benchlink, Somat, etc…).

Section Lead/Principal Environmental Test Engineer

Designs are implemented using VHDL and support the following type of applications: gigabit serial interfaces, Radio Frequency (RF) and Electro-Optical (EO) Digital Signal Processing (DSP), control loops, data links, embedded processing, and processor interfaces. What You Will Do: Configurable Logic Design Engineers work with circuit card designers and systems engineers to develop requirements, select parts, architect the device, perform code development, simulation, and place and route.

FPGA Electrical Design Engineer I (Onsite)

These test solutions are pivotal in supporting the lifecycle of weapon system products, from engineering development and production environments to field operations and long-term sustainment. You will contribute to all phases of the mechanical design lifecycle, from initial concept and CAD modeling to prototyping, testing, and troubleshooting, gaining valuable experience in a collaborative and forward-thinking environment.

Mechanical Engineer I - Test Equipment

What You Will Do: Hardware Design: Assisting in the design of digital circuits for use in missile systems or other effector products, focusing on components like field-programmable gate arrays (FPGAs), application-specific integrated circuits (ASICs), and embedded processors. We are seeking electrical engineer interns willing to collaborate, innovate, and team with our engineers to generate and utilize today's cutting-edge technology to design digital electronic circuits that implement missile guidance, video and digital signal processing.

Digital Design Electrical Engineer Intern (Summer 2027)(Onsite)

Apply or develop highly advanced technologies, scientific principles, theories and concepts to the systems integration of propulsion, thrusters, controllers, software, mechanical and electrical interfaces for integration into missile systems and space vehicles. Work in a collaborative environment with program management in long-range program planning concerning new or projected areas of technological research and advancements and be a key spokesperson on program's technical capabilities and future directions.

Mechanical Engineer II (Onsite)

Education and/or Experience with project work in one or more of the following: mechanical/electronic sub-systems packaging, material selection, thermal analysis, structural analysis, control systems, electrical hardware design, or large assembly development. Test Equipment products are located in engineering labs, in the field, and in production environments utilized for weapon system product verification, qualification, test data analysis, and production test solution development.

Mechanical Engineer II - Test Equipment

We are seeking current college students willing to collaborate, innovate, and team with our engineers to generate and utilize today's cutting-edge technology to design digital electronic circuits that implement missile guidance, video and digital signal processing. The Digital Design Engineer in the Effector Digital Products department designs digital electronic circuit cards and electronic units, which are supported from proposal through transition to production.

Digital Electrical Design Engineer II (Onsite)

Designs are implemented using VHDL and support the following type of applications: gigabit serial interfaces, Radio Frequency (RF) and Electro-Optical (EO) Digital Signal Processing (DSP), control loops, data links, embedded processing, and processor interfaces. This may include digital, analog, power and mixed signal circuit card assemblies, FPGA/VHDL programming or ASIC support, sustaining and production electronics support, components engineering, and product development engineering.

Performance Engineer Jobs in Tucson, AZ

FPGA Design Engineer II RTX Corp

Senior Principal RF Design Engineer RTX Corp

Principal Test Engineer RTX Corp

Sr Principal Real-time Software Engineer RTX Corp

Principal RF Design Engineer RTX Corp

RF Mechanical Engineer II RTX Corp

RF Mechanical Engineer I (Onsite) RTX Corp

RF Mechanical Engineer II (Onsite) RTX Corp

Sr. Manufacturing Development Engineer RTX Corp

Product Development Electrical Engineer I (Onsite) RTX Corp

Mechanical Engineer - Mining Projects Mako Mining Corp

Principal Cryogenics Design Engineer RTX Corp

Section Lead/Principal Environmental Test Engineer RTX Corp

FPGA Electrical Design Engineer I (Onsite) RTX Corp

Mechanical Engineer I - Test Equipment RTX Corp

Digital Design Electrical Engineer Intern (Summer 2027)(Onsite) RTX Corp

Mechanical Engineer II (Onsite) RTX Corp

Mechanical Engineer II - Test Equipment RTX Corp

Digital Electrical Design Engineer II (Onsite) RTX Corp

FPGA Electrical Design Engineer Intern (Summer 2027)(Onsite) RTX Corp

Similar Job Searches

See More Jobs

Stand out to leading employers.