NDE Inspector (Starship) - Phased Array SpaceXNDE Inspector (Starship) - Phased ArrayStarbase, TXAdditional nondestructive evaluation Level II OR III certifications in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: Eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT). Nondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: Eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT).
NDE Inspector (Starship) - Digital Radiography Space Exploration TechnologiesNDE Inspector (Starship) - Digital RadiographyStarbase, TXPREFERRED SKILLS AND EXPERIENCE: Additional nondestructive evaluation Level II OR III certifications in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: Eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT). Nondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: Eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT).
NDT Repair Station Director of Quality/Chief Inspector Patriot AerotechNDT Repair Station Director of Quality/Chief InspectorSan Antonio, TexasPatriot Aerotech is seeking an experienced Director of Quality / Chief Inspector to lead and oversee the Quality Management System (QMS) for its FAA Part 145 Repair Station specializing in Non-Destructive Testing (NDT) services, aviation welding, and aerospace fabrication . The Director of Quality / Chief Inspector serves as the primary authority for airworthiness determinations and acts as the principal liaison with the FAA and customers regarding quality and regulatory matters.
Certified Welding Inspector Structural Manufacturing Velocity Flex of Houston, LLCCertified Welding Inspector Structural ManufacturingHouston, TX$25–$28 / hourThe Structural Inspector will collaborate with production teams and quality assurance personnel to identify defects, recommend corrective actions, and support continuous improvement initiatives. We are seeking a thorough Structural Inspector – Quality to ensure the integrity, compliance, and quality of structural components within our manufacturing plant.
Quality Control Inspector Global Roofing Group IncQuality Control InspectorHouston, TXNDT certifications may include but are not limited to: VT (Visual Testing), UT (Ultrasonic Testing), MT (Magnetic Particle Testing), PT (Penetrant Testing), or RT (Radiographic Testing). Maintain organized, audit-ready QC records including inspection logs, test reports, submittals, and NCRs.
NDE Inspector (Starship) - Digital Radiography SpaceXNDE Inspector (Starship) - Digital RadiographyStarbase, TXAdditional nondestructive evaluation Level II OR III certifications in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: Eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT). Nondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: Eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT).
Certified Weld Inspector MAU Workforce SolutionsCertified Weld InspectorColumbia, SCPerform weld inspections, nondestructive examinations (NDE), and dimensional inspections. Ability to execute inspection plans for pressure vessels, piping, and fabricated equipment.
CWI Certified Welding Inspector CME Associates, Inc.CWI Certified Welding InspectorEast Syracuse, NYFull timeDemonstrates a strong attention to detail by accurately interpreting construction plans, documenting findings, preparing reports, and maintaining effective communication with clients. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering.
OEM - Inspector B 3Rd Shift Chromalloy Gas TurbineOEM - Inspector B 3Rd ShiftOrangeburg, NYCapable of NDT Inspections (Airflow, surface finish, Magnetoscope, and core inspection)Communicate product/process/documentation discrepancies and potential discrepancies to aid continuous improvement efforts. WORK ENVIRONMENTWhile performing the duties of this job, the employee is exposed to moderate cold and moderate heat, loud noise, fumes, and moving equipment in the production floor environment.
Aerospace Repair Inspector B 3Rd Shift Chromalloy Gas TurbineAerospace Repair Inspector B 3Rd ShiftOrangeburg, NYWhile performing the duties of this job, the employee is exposed to moderate cold and moderate heat, loud noise, fumes, and moving equipment in the production floor environment. Complete incoming and final Inspection to ensure production is completing processes correctly as defined in the production work instructions.
Cell 5 (OEM) - CNY - Inspector B 3rd shift Chromalloy Gas Turbine LLCCell 5 (OEM) - CNY - Inspector B 3rd shiftOrangeburg, NYChromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. We are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines.
OEM Inspector B - 2nd shift Chromalloy Gas Turbine LLCOEM Inspector B - 2nd shiftOrangeburg, NYChromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. We are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines.
Aerospace Repair Inspector B 3rd shift Chromalloy Gas Turbine LLCAerospace Repair Inspector B 3rd shiftOrangeburg, NYChromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. We are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines.
Inspctr II, Qlty Assur ProgressRailInspctr II, Qlty AssurKansas City, MOLead Trainer for new employees; Pass Level I NDT (Magnetic Particle) certification; Demonstrate the ability to properly complete and maintain quality documentation; Demonstrate proper documentation of scrap records (shop specific); Review and maintain QWI forms for accuracy and date sensitivity; Perform gage internal calibrations; Maintain shop specific quality gages for proper calibration; Properly fill out subcontractor evaluation forms; Perform internal process and product audits; Maintain the AIMS software for shop specific Quality action items and training records; Review AAR circulars and properly maintain shop specific manuals; Inspect incoming parts, review, and maintain necessary documentation; Demonstrate proper daily inspection of any shop product; Verify shop adherence to Quality specific gage color code system; Mentor / Direct any QA Inspector III or II. Demonstrate knowledge of proper gage calibration and color code; Conduct product inspection, inbound & outbound, documentation of defects and buybacks; Properly work with Traveler's and Quality Work Instructions (QWI's); Demonstrate knowledge of AAR requirements; Ability to read and understand visual inspection criteria, blueprints, and gauges; Conduct audits & inspections for assembly & manufacturing functions; Able to work well with production and others team members consistently, accurately, and safely.
Maintenance Manager FWG Solutions, Inc.Maintenance ManagerPanama City Beach, FLOther: This position includes physical activity, personnel must be able to work in environments with the following conditions: repetitive motion, ventilated spaces, heavy lifting, traversing ladders and inclines/declines, climbing/crawling/navigating small and confined spaces, working in kneeling positions, frequent standing, working in hot workspaces due to natural or manmade environments. The Maintenance Manager will be responsible for leading, coordinating and executing maintenance, repairs and modification efforts on complex mechanical systems to ensure their successful support of the U.S. Navy’s Landing Craft, Air Cushion (LCAC) Amphibious Combat Vehicle (ACV) program on base.
QA-NDT Inspector (Job ID: 1385) Colonna's Shipyard IncQA-NDT Inspector (Job ID: 1385)Norfolk, VAGenerate, review and / or submit condition found reports, test and inspection plans, process control procedures, test documents and / or corrective action reports (CAR) as required to document customer requirements or non-conformances. Physical Requirements: Sit, Stand, Walk, Bend, Squat, Climb, Reach, Push and Pull, Stoop, Crawl, Kneel, Balance, Lift and Carry various objects and equipment.
Career NDT Quality Inspector Trinity Industries IncCareer NDT Quality InspectorCartersville, GAAs a member of the Maintenance/Repair Services team at Trinity, you'll non-destructively test preventive maintenance, structural, and mechanical repairs. Current Ultrasonic Testing Level II Certification and any NDT certifications as follows are a plus: Liquid Penetrant Test Method (PT).
Career NDT Quality Inspector 2nd shift Trinity Industries IncCareer NDT Quality Inspector 2nd shiftShell Rock, IAAs a member of the Maintenance/Repair Services team at Trinity, you'll perform Non-Destructive Testing for preventive maintenance and on structural and mechanical repairs, structural, and mechanical repairs. Basic mechanical aptitude to read drawings and ability to use railroad gauges, testing techniques and test equipment.
NewQuality Control Inspector McCarl's Technical ServicesQuality Control InspectorIndiana, PAFull timeThe Quality Control Inspector will play a critical role in overseeing the fabrication and field installation by coordinating, conducting and recording examinations while identifying and resolving quality issues. Inspect welded joints of work in progress and/or completed units for; visible defects, correct dimensions, weld penetration, and conformance with client specifications.
Orion NDE Level II Quality Inspector, Senior ASRC Federal Holding CompanyOrion NDE Level II Quality Inspector, SeniorMerritt Island, FLASRC Federal System Solutions (AFSS) is seeking a NDE Level II Quality Inspector, Senior at Kennedy Space Center, FL.Job Description:Non-Destructive Test (NDT)/Quality Control (QC) inspector supporting the Orion manned space flight program in the Neil Armstrong Operations and Checkout Facility at Kennedy Space Center, Florida. Requirements: High school diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 3+ year experience.
NDT Level II / CWI / API - ATS San Diego, CA - Part Time Call Out And Also Permanent Positions (56378) Applied Technical ServicesNDT Level II / CWI / API - ATS San Diego, CA - Part Time Call Out And Also Permanent Positions (56378)San Diego, CA$25–$45 / hourSummary: ATS is seeking NDT experienced NDT Level II (4 methods) and/or CWI and/or API Techs to support our San Diego, CA office. The Company serves clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense.
Quality Control Inspector - 2nd Shift Zalk Josephs Fabricators L.L.C.Quality Control Inspector - 2nd ShiftStoughton, WisconsinThe Zalk Josephs team has built their reputation on proven performance and meeting their customer's stringent demands at highly competitive prices. Excellent communication and interpersonal skills with the ability to communicate effectively with all levels of the organization, as well as with customers and vendors.
AWS Certified Weld Inspector (CWI) - Fabrication HitachiAWS Certified Weld Inspector (CWI) - FabricationCrystal Springs, MississippiReporting manufacturing process deviations and defects in finished goods and liaising with Quality Assurance to troubleshoot and resolve problems An Experienced Professional (P2) applies practical knowledge of job area typically obtained through advanced education and work experience. Welder Support: Provide technical assistance and guidance to welders and production teams regarding welding procedures and quality issues.
Ultrasonic Testing Weld Inspector Environmental Air Systems, LLCUltrasonic Testing Weld InspectorHigh Point, NCEnvironmental Air Systems, a full-service mechanical contractor, is seeking a skilled and experienced ASNT Level 2 Ultrasonic Testing (UT) Weld Inspector to join our team. This role requires expertise in nondestructive testing techniques, with a focus on ultrasonic inspection, and an ability to document findings accurately.
Welding Inspector | Work on Military & Aerospace Projects | Apopka, FL Pave TalentWelding Inspector | Work on Military & Aerospace Projects | Apopka, FLApopka, FloridaWe are working with a leading aerospace ground support equipment and specialized industrial platforms manufacturer on a direct hire Welding Inspector opening in Apopka, FL. Minimum 2 years of documented NDT (Non-Destructive Testing) Level II experience in magnetic particle and liquid penetrant testing.
NewConstruction Inspector - Welding/Coating Accura EngineeringConstruction Inspector - Welding/CoatingChattanooga, TennesseeJob Title: Construction Inspector- Welding/Coating ***Work Location: Russellville, AL*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities Observe, inspect, and provide reports on construction projects at federal facilities for compliance with plans and specifications in regard to workmanship, materials, installation, and construction methods. Coating inspection and must have NACE Level I or higher or SSPC Protective Coatings Inspector Level 1 or higher and shall have received formal training in coating inspections and testing of various coating systems and methods of application.
QA/QC Manager University Mechanical & Engineering AZQA/QC ManagerTempe, ArizonaFull timeOur expertise includes design-assist, HVAC, plumbing, sheet metal, and process piping construction for semiconductor, data center, healthcare, biotech, water treatment, power generation, and other facilities. While performing the duties of this job, the employee may be occasionally required to travel by car (as a passenger or driver) or by airplane to field locations/jobsites, or to attend business meetings/events, and must have the ability to navigate around job sites.
NewNew Glenn and Lunar Operations - Quality Specialist (C- Shift ) Blue OriginNew Glenn and Lunar Operations - Quality Specialist (C- Shift )Space Coast, Floridaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
NewNew Glenn PA Operations - Quality Specialist A-Shift Blue Origin Enterprises LPNew Glenn PA Operations - Quality Specialist A-ShiftFLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
NewNew Glenn PA Operations - Quality Specialist A-Shift Blue OriginNew Glenn PA Operations - Quality Specialist A-ShiftSpace Coast, Floridaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
Quality Control Welding Inspector Module X SolutionsQuality Control Welding InspectorShreveport, Louisiana$20–$25 / hourESSENTIAL JOB DUTIES AND RESPONSIBILITIES: · Performs daily quality assurance inspections of welded products as required by Quality Control [QC] checklists, drawings, and specifications · Examine all shelters, skids, and containers as needed · Verify fit up and layout of products meet drawings specifications · Complete NDT [Magnetic Particle] inspections of lifting lugs and visual inspection of all welds · Document product deficiencies and follow-up with production to ensure they are corrected · Assist with all welding and fitter tests · Performs other duties as assigned QUALIFICATIONS: Work Experience: 1+ year experience in a metal fabrication or inspection related job. MODULE X SOLUTIONS is a rapidly growing modular manufacturing business that serves marquee corporate and government customers in renewable energy, network infrastructure, battery storage, telecommunications, petrochemical, utility, transportation, and other verticals.
NewCertified Welding Inspector - Permanent - ATS Intermountain in Englewood, CO (57346) Applied Technical Services IncCertified Welding Inspector - Permanent - ATS Intermountain in Englewood, CO (57346)Englewood, CO$35–$45 / hourMinimum: Requirements/Qualifications: CWI/NDT Level II Technicians Meet the minimum requirements of an AWS-CWI and NDT Level II; provide documentation of education, training, and experience in the applicable NDT method(s); have a working knowledge of industrial environments and general manufacturing processes; ability to effectively communicate with other departments, and customers to report issues and solve problems. A U.S. Person includes (a) U.S. citizens or nationals; (b) U.S. lawful permanent residents (i.e., green card holders); (c) persons granted refugee status; or (d) persons granted asylum in the United States.
QA Inspector ST Engineering North AmericaQA InspectorPensacola, FLJOB SPECIFICATIONS: Good working knowledge or the ability to acquire skills in the following: Proficient with Microsoft Office computer applications; strong writing and presentation skills; proficient skills in organizing, analyzing and preparing reports; excellent communication skills; strong interpersonal skills needed for frequent interaction with customers, Leads, Managers and Directors. Working knowledge of aircraft manuals and related materials; working knowledge of aircraft maintenance and non-destructive testing; knowledge of paperwork procedures, routine/non-routine cards, S.R.M.'s and work sign off procedures; familiar with F.A.R.'s and company policies and procedures.
NewCertified Welding Inspector Synerfac Technical StaffingCertified Welding InspectorTallahassee, FLThe ideal candidate must be a current AWS Certified Welding Inspector (CWI) with structural and/or bridge experience, along with one of the following: NDT Level II certification in UT Shearwave and Magnetic Particle Testing (PAUT experience is a plus); NACE Level II or III certification; or ICC certification in Structural Steel and Bolting, with a willingness to obtain the ICC Firestopping certification. The role involves performing inspections in accordance with applicable codes and project requirements, ensuring that all aspects of the work align with plans and specifications.
Part Time Certified Welding Inspector (CWI) KTA-Tator, Inc.Part Time Certified Welding Inspector (CWI)Reno, NVFull timeFive business units comprise the $40 million enterprise offering a broad range of coatings, steel, concrete fabrication and building envelope inspection, evaluation, and testing services in nearly every market and industry. KTA-Tator, Inc. (KTA) is a 100% employee-owned materials engineering firm, internationally recognized as a leading expert in corrosion protection and asset integrity.
NewTemporary API 510/570 Inspector Acuren Group IncTemporary API 510/570 InspectorLa Porte, TXCommitted to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees.
Visual Inspector API 510/570/653 Acuren Group IncVisual Inspector API 510/570/653Decatur, IL$37.50–$60.58 / hourCommitted to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees.
Senior API Inspector/Project Lead Acuren Group IncSenior API Inspector/Project LeadBirmingham, ALCommitted to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees.
Rope Access Level I API Inspector Acuren Group IncRope Access Level I API InspectorNew Orleans, LACommitted to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees.
Visual Inspector API (510/570/653) Acuren Group IncVisual Inspector API (510/570/653)Decatur, ALCommitted to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees.
API 510/570 Inspector Acuren Group IncAPI 510/570 InspectorTorrance, CACommitted to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees.
Temporary Rope Access/API 510/Inspector 4 week project in Texas City, TX Acuren Group IncTemporary Rope Access/API 510/Inspector 4 week project in Texas City, TXLa Porte, TXCommitted to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees.
CWI/ Certified Welding Inspector Call Out Work In California Acuren Group IncCWI/ Certified Welding Inspector Call Out Work In CaliforniaTorrance, CA$39.56–$65.93 / hourCommitted to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees.
Pipe Welder - C Shift (All Levels) Blue Origin Enterprises LPPipe Welder - C Shift (All Levels)Huntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Inspector B NOV IncInspector BHueytown, ALPurposeful Innovation: Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future.
Materials & Process Technician 4 Cirrus AircraftMaterials & Process Technician 4Duluth, Minnesota$30.93–$46.39 / hourFull timeThe Technician partners closely with engineering, manufacturing, and quality teams to ensure materials and processes meet performance, safety, and regulatory requirements, and contributes directly to engineering decision-making and certification efforts through analysis and interpretation of results. Responsibilities: Execute and develop materials and process test methods, including chemical, mechanical, physical, and nondestructive testing, to validate aerospace structures and materials (e.g., Static and Dynamic Mechanical Testing Systems, DSC, DMA, Microscopy).
Senior NDT Quality Inspector Trinity Industries IncSenior NDT Quality InspectorLongview, TXThe PAUT LVL II Or UTSW LII technician will be responsible for conducting performance testing and evaluations of material and equipment using phased array ultrasonic testing (PAUT) techniques. The technician will also be responsible for producing accurate and detailed reports of the inspection results and identifying areas for improvements, as well as ensuring that all data and information is safely stored and maintained.
Aerospace NDT III - Inspector BelcanAerospace NDT III - InspectorOgden, UTPT certification required (Liquid Penetrant Testing)- RT certification required (Radiographic Testing)Required Skills and Experience:- 5+ years relevant experience.- Must be certified to NDT level III in Radiographic Testing and Liquid Penetrant Inspection methods (ASNT certification is HIGHLY preferred). REQUIRED CERTIFICATION: Responsible NDT Level III - RT & PT (ASNT certification is highly preferred - minimum requirement is NAS 410)Essential Job Responsibilities:- Prepare and verify work instructions for NDT methods to be in compliance with customer specifications and requirements.-
NDT Level III (Job ID: 1334) Colonna's Shipyard IncNDT Level III (Job ID: 1334)Norfolk, VAAdditionally, this role serves in various Quality Management capacities to include: Assist in the performance of and/or management of various internal and external weld and brazing audits and in-process surveillances, conducts inspections, attends checkpoints, writes/documents required reports and test and inspection plans. May serves as a primary liaison between Colonna's Shipyard and the customer, to include government representatives, to answer and investigate discrepancies, concerns, or issues and ensure execution of corrective actions and compliance with customer specifications relative to the weld program on matters related to their area of responsibility.
NewORION NDE Level II Quality Inspector, Senior ASRC Federal Holding CompanyORION NDE Level II Quality Inspector, SeniorMerritt Island, FLRequirements: High school diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 3+ year experience. Job Description: Non-Destructive Test (NDT)/Quality Control (QC) inspector supporting the Orion manned space flight program in the Neil Armstrong Operations and Checkout Facility at Kennedy Space Center, Florida.