UNKNOWN

FEED

Post-graduate degree in systems engineering, engineering management, engineering mechanics, operations research, industrial engineering, electrical engineering, or related field; Ten years of relevant professional work experience developing systems requirements, systems designs, and/or leading systems integration on large complex projects; Three or more years of professional work experience specific to hardware architecture or design of FPGA, RF, real-time, embedded, or distributed data-acquisition systems, including direct RF digitization, custom GNSS receiver front-ends, and/or RF distribution, splitter, and switch designs; Specialized study, research, or work experience with real-time / streaming data, firmware, and distributed hardware systems, including high-speed data paths from digitizers/FPGAs to host systems (e.g. The work spans integrating COTS and custom equipment into racks of equipment that support specialized datacenter processing and remote GNSS data collection at sites around the world, the development of custom GNSS receivers that combine commercial servers with FPGAs and perform direct digitization of incoming RF signals for processing, and RF distribution, splitter, and switch designs.

YEAR

The University of Texas at Austin

Hardware Systems Engineering Scientist

linkup_via_bold

We are deeply committed to recruiting and retaining a talented workforce that embraces our core values of Respect, Excellence, Leadership, Loyalty, Integrity, and Service, by offering competitive salaries, an array of benefits, an extensive support network, and above all, an enriching and highly collaborative working community that is deeply passionate about our vision for higher education, research, and public service. The Postdoctoral Researcher will perform research on the experimental measurement and analysis of dissolution/precipitation kinetics of cementitious components and the rheological properties, reaction rates, and mechanical property development of novel materials for 3D printing of cementitious materials.

Texas A&M

Postdoctoral Researcher

sourcestack_via_bold

Required Qualifications: Bachelor's degree in Electrical Engineering, Chemical Engineering, Materials Science, Physics, or related field (advanced degree a plus).8+ years of semiconductor manufacturing experience, preferably in 150 mm/200 mm fabs.3+ years of leadership or supervisory experience in a production environment with a proven track record of performance management. This role is directly accountable for delivering measurable results in process stability, cost reduction, tool productivity, and continuous yield improvement across mature technology nodes.

SkyWater Technology Foundry

Manufacturing Senior Manager

ea_via_bold

Experience with semiconductor manufacturing and unit process modules, operations and engineering management, defect metrology, yield modeling, physical/elemental analysis, and 6-sigma methodsTrack record of formal high-performance team leadership, including goal management, planning, group development, budgeting, performance reviews, hiring/termination, and cross-functional collaborationHigh internal drive with the ability to own, prioritize and perform under pressurePossession of high integrity, accountability, good work ethic, respect for people, and ability to handle conflicts, inspire, develop, empower, and motivatePositive demeanor in tough, demanding environmentDemonstrated good communication and audience-targeted presentation skills to higher level management up to EVPDeveloped skills in:- Goal setting and project management- Critical thinking and problem solving- Communication and Presentations- Innovative thinking- Proactiveness and multitasking- Risk management- Mentoring- Strategic planning. Define and execute long term strategy for the group (tool and systems roadmap, cost, support needs, organization, staffing, succession planning, key metrics, projects, global benchmarking, collaboration, etc.).Resolve technical and personnel-related issues within the team.

Senior Product Engineering Manager

Skills: Assembly Processes, Assembly Processes, Automation Systems, CAD Tools, Change Management, Cleanroom Operations, Coaching Management, Communication, Conflict Resolution, Continuous Improvement, Cross-Functional Collaboration, Decision Making, Design of Experiments (DOE), Equipment Qualification, Fabrication Processes, Failure Analysis, Leadership, Lean Manufacturing, Manufacturing Execution Systems (MES), Manufacturing Operations, Materials Characterization, Metrology, Microfabrication Techniques, People Leadership, Performance Management (PM) {+ 13 more}. Working under the guidance of senior engineering leadership, the Manager will coach team members, coordinate priorities, resolve manufacturing issues, and deliver measurable improvements in safety, quality, yield, cycle time, and cost.

FormFactor Inc

Manager, Process Engineering

Execute and improve preventive maintenance, chamber cleans, wet cleans kit changes, leak checks, and recovery sequences so tools return to process-worthy condition with documented particle, vacuum, and electrical results; troubleshoot vacuum, RF/plasma, gas and chemical delivery, pneumatics, interlocks, thermal systems, and wafer-handling robots to the component level. Work from Tool Hookup Design Packages (THDPs) as the field source of truth (utility matrices, stick diagrams, P&IDs, POU/VMB laterals, electrical one-lines, seismic/pad, exhaust/abatement, and isometrics); walk packages against as-built conditions, redline discrepancies, and close punchlist items with design engineering before OEM startup.

Tesla Inc

Engineering Technician, Wet Etch, Terafab

We are deeply committed to recruiting and retaining a talented workforce that embraces our core values of Respect, Excellence, Leadership, Loyalty, Integrity, and Service, by offering competitive salaries, an array of benefits, an extensive support network, and above all, an enriching and highly collaborative working community that is deeply passionate about our vision for higher education, research, and public service. Purpose: The Postdoctoral Researcher will perform research on the experimental measurement and analysis of dissolution/precipitation kinetics of cementitious components and the rheological properties, reaction rates, and mechanical property development of novel materials for 3D printing of cementitious materials.

Texas A&M Engineering Experiment Station

Can demonstrate hands-on familiarity with tight-tolerance machining (Wire EDM, CNC/centerless grinding); direct experience with surface finishing (deburring) and functional coating application processes; demonstrated track record implementing automated inspection systems (Vision, CMM, structured light, or inline sensors). As the only U.S manufacturer of permanent rare earth magnets essential to a range of technologies that rely on an electric motor--from electric vehicles to medical devices to aerospace and defense systems to clean energy--we’re ushering in an electric future that is 100% Made in America.

Noveon Magnetics

Process Engineering Manager

Engineering Technician, Metal Deposition, Terafab

Engineering Technician, Anneal, Terafab

Engineering Technician, Epitaxy, Terafab

Engineering Technician, Tool Install, Terafab

Working at fab2 We’re an early-stage hardware startup with solid funding, world-class advisors, and labs/offices in Austin, TX, Lockhart, TX, and San Francisco, CA. Candidates should have hands-on cleanroom experience and a track record of developing nanofabrication recipes from scratch, ideally across multiple process steps.

Fab2

Process Engineering Intern - Summer

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Manage resource allocation, project schedules, and cross-functional dependencies to deliver automation projects on scope, schedule, and budget; maintain visibility into individual project health - requirements, capabilities, schedule, and cost - and ensure accurate roll-up into the team's local program plan and the broader Factory Automation program.

Blue Origin Enterprises LP

Manager, Factory Automation

If you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at Accommodations_Program@amat.com, or by calling our HR Direct Help Line at 877-612-7547, option 1, and following the prompts to speak to an HR Advisor. Hands-on technical depth in advanced packaging integration, such as 2.5D/3D packaging, high-density substrates, fan-out, or build-up processing, with working knowledge of PVD, plating, etch, lithography, and dielectric processes.

<p>Applied Materials (Nasdaq: AMAT) is the leader in Materials engineering solutions used to produce virtually every new chip and advanced display in the world. Our expertise in modifying materials at atomic levels and on an industrial scale enables customers to transform possibilities into reality. At Applied Materials, our innovations make possible the technology shaping the future. To support customers around the world, Applied Materials employs approximately 22,000 people in over 100 locations in 18 countries.</p> 




Applied Materials Inc

Panel Packaging Technology Enablement Director

Nova dives deep into dimensions and layers at the atomic level to extract unique insights and provide our customers with crucial decision-making data, managing critical challenges by providing unique, differentiated solutions. We leverage multiple technology fields such as physics, optics, chemistry, and algorithms to develop hardware and software solutions that measure almost every advanced computer chip built in the world.

Nova Ltd

Optical Architect

We are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets. Coherent provides a comprehensive career development platform within an environment that challenges employees to perform at their best, while rewarding excellence and hard-work through a competitive compensation program.

II-VI Optical Systems, Inc.

Capital Procurement Commodity Manager Semiconductor Device

Systems Architect (Optics)

The Photolithography Process Technician is responsible for sustaining daily manufacturing operations within the photolithography department This role focuses on operating, monitoring, and troubleshooting ASML steppers and scanners alongside TEL (Tokyo Electron) track systems during 12-hour compressed work week shifts to ensure optimal product quality, tool uptime, and yield targets. Physical & Schedule Requirements: Ability to stand, walk, and carry wafer pods inside a cleanroom environment for the duration of a 12-hour compressed work week shift (including scheduled days, nights, weekends, and holidays as required by the shift schedule).

SkyWater Technology Inc

Photolithography Process Technician

The company’s patented air core motors offer superior performance in half the weight and size, at a fraction of the carbon footprint of traditional motors, making them pound for pound the most efficient in the world. · Troubleshoot, optimize and perform detailed failure analysis on products in order to make DFM improvements and insert early stage testing.

Metrology Engineer Jobs in Texas

Hardware Systems Engineering Scientist The University of Texas at Austin

Postdoctoral Researcher Texas A&M

Manufacturing Senior Manager SkyWater Technology Foundry

Senior Product Engineering Manager SkyWater Technology Foundry

Manager, Process Engineering FormFactor Inc

Engineering Technician, Wet Etch, Terafab Tesla Inc

Postdoctoral Researcher Texas A&M Engineering Experiment Station

Process Engineering Manager Noveon Magnetics

Engineering Technician, Metal Deposition, Terafab Tesla Inc

Engineering Technician, Anneal, Terafab Tesla Inc

Engineering Technician, Epitaxy, Terafab Tesla Inc

Engineering Technician, Tool Install, Terafab Tesla Inc

Process Engineering Intern - Summer Fab2

Manager, Factory Automation Blue Origin Enterprises LP

Panel Packaging Technology Enablement Director Applied Materials Inc

Optical Architect Nova Ltd

Capital Procurement Commodity Manager Semiconductor Device II-VI Optical Systems, Inc.

Systems Architect (Optics) Nova Ltd

Photolithography Process Technician SkyWater Technology Inc

Director, PCB Technology Infinitum

Similar Job Searches

Stand out to leading employers.