UNKNOWN

FEED

Experience & Education Required for the Calibration Technician II: A two-year degree in Life Sciences, Engineering, Electronics, other related technical field OR equivalent military training and two years of applicable (Metrology, Instrumentation, Calibration) experience OR the equivalent combination of education and experience. This position will focus on performing preventive maintenance, qualifications, relocations and calibrations on a variety of instruments such as electronics, temperature devices, pressure gauges, centrifuges, incubators, balances, and others as found in pharmaceutical manufacturing and laboratory environments.

HOUR

Applied Industrial Technologies Inc

Calibration Technician II

linkup_via_bold

Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. This is a hands-on leadership role that blends strategic quality management, deep technical engagement with suppliers, cross-functional collaboration, and relentless pursuit of operational excellence.

YEAR

Divergent Technologies, Inc.

Director, Supplier Quality

Contractual first article and delivery milestones are met, there are no customer escapes, there was no schedule slip the customer heard about after the fact, you can demonstrate a measurable reduction in vendor-caused defects reaching our factories, and your corrective actions were closed with objective evidence. Identify and mitigate supply chain risk, including sole-source exposure on complex machined and formed parts, capacity constraints at special process houses, long lead raw material and forgings, and tooling ownership and transferability.

Amca

Supply Chain Engineer, Mechanical

sourcestack_via_bold

Physical Requirements: Ability to stand for extended periods of time; Ability to crouch, bend, and reach materials to inspect large items; Must be able to move into confined areas to check specified items in machine shop; Ability to lift and move materials weighing 25 pounds or less; Manual dexterity may be required to rotate and inspect small components and materials; Most work tasks are performed indoors where temperature is moderate and controlled by office environment systems; Ability to work (sit and/or stand) at a desk for the majority of the work day; walking and/or standing may be required for the remainder of the work day. Length of time performing these physical requirements may vary from day to day and task to task; Requires grasping, writing, sitting, standing, walking, repetitive motions, pulling, pushing, listening and hearing ability, and visual acuity; Ability to operate office equipment such as computers, printers, multi-line touch tone phone, filing cabinets, facsimile (FAX) machines, photocopiers and other office equipment as applicable; and.

Griswold Industries Co

Quality Control Calibration Technician

Coordinate with the Global Workplace Services (GWS) team for executive-level reporting (Monthly Business Reviews, Quarterly Business Reviews, Strategic Planning, Facilites Resource Allocation Meetings). The PCM will collaborate closely with the Corporate Facilities team, Contractors/Consultants, A/E firms, Regulatory Bodies, and various internal teams including Legal, Real Estate, Finance, Purchasing, and Insurance.

KLA Corporation

Project Controls Manager

ea_via_bold

We are seeking an experienced FPGA Firmware Design Manager to lead a team of FPGA and firmware engineers responsible for developing high-performance digital solutions for advanced semiconductor inspection and metrology systems. Provide technical guidance on: High-speed digital interfaces; Data acquisition systems; Image processing pipelines; Motion control systems; Real-time embedded systems; FPGA-based signal processing.

Fpga Firmware Design Manager

Facility upkeep: Assist with day-to-day tasks including equipment upkeep, inventory management, moving or rearranging equipment, and maintaining a clean and organized workspace. Kinetic uses proprietary AI and autonomous robotics technology to automate vehicle maintenance and simplify repair administration for collision shops, dealerships, and insurance carriers.

Kinetic Automation

Adas Calibration Technician

Provide technical direction and engineering leadership across electrical design activities, mentor engineers on complex technical challenges, and guide cross-functional teams in making sound electrical system and design decisions. As a technical leader and individual contributor, you will work closely with systems engineers, scientists, firmware/software engineers, mechanical engineers, manufacturing, suppliers, and other cross-functional teams to develop reliable, production-ready systems.

Nova Ltd

Electrical Engineering Technical Manager

The successful candidate will lead a small team of optics engineers while remaining directly involved in equipment builds, optical integration, alignment, calibration, troubleshooting, and root cause analysis on the manufacturing floor and in the laboratory. The role works closely with Hardware Design, Controls/Software, Process Engineering, Operations, and Manufacturing teams to resolve optical performance issues that affect equipment quality, reliability, uptime, and throughput.

Samson Rose

Optical Manufacturing Manager

The company builds complex electromechanical systems ranging from custom-machined components and subassemblies to fully integrated systems delivered to semiconductor fabrication and OEM customers. Perform dimensional inspections using calipers, micrometers, height gauges, CMMs, optical comparators, surface plates, and other precision metrology equipment.

Caltek Staffing

Dimensional Inspector

jobdiva

Client's Systems Integration & Test Environment center is seeking a Senior Analyst Support/ Lab Lead to manage and implement environmental test projects, as well as oversee the day-to-day administrative functions of multiple engineering and environmental test labs. Help share updates and general communication with teams; support managers with routine coordination tasks.

Zobility

Senior Analyst Support/ Lab Lead

Guide verification and validation strategies, including test methods and test-method validation, acceptance criteria, and worst-case configurations; provide technical oversight of mechanical and functional testing and, as applicable, biocompatibility, cleaning, sterilization, packaging, and distribution testing. Establish scientifically sound statistical methods for product testing, process qualification, inspection, and performance monitoring, including sample sizes and acceptance criteria justified by the engineering question, risk, data characteristics, and required strength of evidence.

SI-BONE

Director, Quality Engineering

Establish tooling/work offsets, validate programs, make in-machine adjustments, and resolve issues at the spindle. Run full setups from drawings, programs, setup sheets, and work instructions—no dedicated setup crew needed.

TekPro Engineering

Precision Multi‑Axis CNC Setup Specialist — Aerospace & Defense

100hires

The Meter Calibration Technician will perform all non-electrical tasks necessary to conduct retail gasoline meter calibration on regulated fueling systems at area gas stations, including but not limited to driving a company vehicle, sending and receiving work schedules & reports electronically, wearing appropriate PPE, obtaining regulatory licensing including manufacturer certifications, attending professional equipment training, properly maintaining company equipment and vehicle, and attending required meetings and teleconferences. If issued a Commercial Motor Vehicle (CMV), a CDL and periodic DOT drug screening and physical exams are required (paid for by the company).TRAINING:

Tanknology

Meter Calibration Technician

Certain information you provide as part of the application will be used for purposes of determining whether Intuitive Surgical will need to (i) obtain an export license from the U.S. Government on your behalf (note: the government's licensing process can take 3 to 6+ months) or (ii) implement a Technology Control Plan ("TCP") (note: typically adds 2 weeks to the hiring process). U.S. Export Controls Disclaimer: In accordance with the U.S. Export Administration Regulations (15 CFR §743.13(b)), some roles at Intuitive Surgical may be subject to U.S. export controls for prospective employees who are nationals from countries currently on embargo or sanctions status.

Intuitive Surgical Inc

Senior IQC Inspector

PGS Worldwide is seeking an Engineering Lab Support Specialist – Environmental Testing in Goleta, CA for an approximately one-year contract-to-hire role supporting a leading aerospace & defense company. This position will support the daily operations of engineering and environmental testing laboratories, including safety compliance, equipment tracking, audit preparation, and administrative coordination.

PGS Worldwide

$32/hr. - Engineering Lab Support Specialist - 00002018

Work is primarily indoors in an electronic lab/warehouse environment and may include prolonged periods of standing and computer work, frequent interruptions, and deadline-driven activity in a low-to-moderate noise environment. Experience programming controllers for calibration or testing of Agilent, Fluke, Tektronix, Keysight, Viavi, EXFO, and Rohde & Schwarz Performance Verification Software (RSPVS) instruments.

Electro Rent Corporation

RF Telecom Programmer

Perform dimensional and visual inspections on complex mechanical and welded components using precision measurement tools and equipment (e.g., calipers, micrometers, height gauges, CMM, FARO arm). We are seeking a Quality Inspector to join our growing team and ensure the highest level of quality and reliability across all hardware produced at our facility.

Hermeus

Quality Inspector

From the smartphones in our pockets that access the world's collective knowledge, to the cloud-based services where all that information lives, to high-speed wireless communication and computing power needed to drive artificial intelligence, augmented and virtual reality, gaming and so much more, our technology is all around us. In this highly visible role, you will help ensure that precision-machined components, assemblies, and electro-mechanical systems meet demanding engineering and quality requirements before they move through production, protecting manufacturing flow, product performance, and customer satisfaction.

Veeco Instruments Inc.

Quality Control Inspector

Vast is rapidly developing its multi-module Haven Station to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high-quality meals for employees.

Metrology Engineer Jobs in California

Calibration Technician II Applied Industrial Technologies Inc

Director, Supplier Quality Divergent Technologies, Inc.

Supply Chain Engineer, Mechanical Amca

Quality Control Calibration Technician Griswold Industries Co

Project Controls Manager KLA Corporation

Fpga Firmware Design Manager KLA Corporation

Adas Calibration Technician Kinetic Automation

Electrical Engineering Technical Manager Nova Ltd

Optical Manufacturing Manager Samson Rose

Dimensional Inspector Caltek Staffing

Senior Analyst Support/ Lab Lead Zobility

Director, Quality Engineering SI-BONE

Precision Multi‑Axis CNC Setup Specialist — Aerospace & Defense TekPro Engineering

Meter Calibration Technician Tanknology

Senior IQC Inspector Intuitive Surgical Inc

$32/hr. - Engineering Lab Support Specialist - 00002018 PGS Worldwide

RF Telecom Programmer Electro Rent Corporation

Quality Inspector Hermeus

Quality Control Inspector Veeco Instruments Inc.

Quality Inspector Vast

Similar Job Searches

Stand out to leading employers.