NewMechanical Habitability Engineering Technician III Epsilon SystemsMechanical Habitability Engineering Technician IIINorfolk, VAul>Recommend support for fleet maintenance on U.S. Navy aircraft carrier shipboard habitability mechanical equipment, including reach-in refrigerators, ventilation, and air conditioning systems. Summary: The Mechanical Habitability Engineering Technician III will provide support to U.S. Navy Aircraft Carriers stationed at Naval Station Norfolk.
Electrical and Electronic Maintenance Technician Hampton Roads TransitElectrical and Electronic Maintenance TechnicianNorfolk, VAFull timeThis includes installing, troubleshooting, repairing, maintaining, and performing scheduled maintenance on traction power substations, Train Control Systems, Electric Bus charging stations and related components with the inspection, maintenance, repair, installation, and alteration of all Light Rail Transit (LRT) systems and amenities while ensuring the safe and reliable operation of the LRT system. LRT Systems Maintenance Technicians perform a variety of assignments related to overhead lines, supporting structures, substations, signal & communications, and electrical/mechanical facility amenities.
Apartment Maintenance Technician - MAA Adalay Bay MAA Adalay BayApartment Maintenance Technician - MAA Adalay BayChesapeake, VAFull timeResponsibilities include preparing apartments for move-in diagnosing, troubleshooting, and repairing heating, ventilation and air conditioning (HVAC) units; electrical appliances, outlets, and light fixtures; plumbing, carpentry, and locks. Certifications include EPA Type II or EPA Universal Certification (EPA 608, R410A Safety and Low Global Warming refrigerants certifications) and Certified Pool Operator from the Pool and Hot Tub Alliance.
FACILITIES MAINTENANCE TECHNICIAN Carter Machinery Company, IncFACILITIES MAINTENANCE TECHNICIANChesapeake, VA$26.46–$33.26 / hourIn addition to base pay, the compensation package may include participation in performance-based incentive programs (e.g., discretionary or non-discretionary plans), as well as overtime eligibility depending on the role. The Facilities Maintenance Technician is responsible for providing the highest level of service and maintenance to assigned facilities to keep utilities and equipment in optimum operating condition.
Diesel Technician/Mechanic III - Entry Level PenskeDiesel Technician/Mechanic III - Entry LevelNewport News, VAFull timeWillingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required. • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles.
NewQUICK SERVICE TECHNICIAN Hendrick Automotive Group CorporateQUICK SERVICE TECHNICIANNorfolk, VirginiaFull timeWhile performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl. Performs lube, oil and filter changes by draining and replacing oil and filter, and lubricating all joints, including idler arm steering knuckles, tie rods ends and ball joints.
NewEngineering Technician II | MARMC (Submarine PSSE Program) Strategic Technology Institute Inc,Engineering Technician II | MARMC (Submarine PSSE Program)Norfolk, VAp>• Support work onMissile Tube Loading/Handling Maintenance Platforms, weapon cradles, ballastcans, VLS/VPT platforms, munitions trailers, handling slings, beams,containers, deployment stands, torpedo/Tomahawk ancillary gear, and relatedPSSE/non-ordnance handling equipment. • Experience withsubmarine PSSE, non-ordnance handling equipment, VLS/VPT platforms, ballastcans, weapon cradles, AUR/AURB/AURVS/AURES, TMDs, TOTEMS, munitions trailers,slings, beams, containers, or related handling/support equipment.
NewCertified Automotive Technician Hendrick Automotive Group CorporateCertified Automotive TechnicianNorfolk, VirginiaFull timeRick Hendrick Cadillac (Norfolk)Location: 6222 Virginia Beach Blvd, Norfolk, Virginia 23502. While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Body Shop Technician I - $3,000 Sign on Bonus PenskeBody Shop Technician I - $3,000 Sign on BonusChesapeake, VAFull timeDuties may include the overhaul, adjustment, replacement and repair of all series of motor truck and trailer equipment including, but not limited to the following: Cab/ Sheet Metal Repair, Fiberglass Repair, Composite Bonding/ Repair, Welding/ Fabricating, Frame Straightening/ Alignment, Suspension Repair/ Alignment, Box Repair/ Replacement, Air Conditioning Systems, Electrical/ Brake/Cooling Systems, Surface Preparation, and Paint/ Mixing/ Tinting/ Blending. As an experienced Body Shop Technician with Penske, you’ll use industry-leading technology and repair techniques – plus cutting-edge diagnostic equipment – to get our customers' state-of-the-art vehicles back up and running in high-quality condition.
ELECTRIC POWER GENERATION (EPG) APPRENTICE TECHNICIAN Carter Machinery Company, IncELECTRIC POWER GENERATION (EPG) APPRENTICE TECHNICIANChesapeake, VA$22–$26 / hourThe EPG Apprentice Technician is provided training and development to accurately troubleshoot and diagnose, inspect, maintain and repair engines and related electrical systems on generators and automatic transfer switches. Required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear.
NewFIELD SERVICE TECHNICIAN Carter Machinery Company, IncFIELD SERVICE TECHNICIANChesapeake, VA$30.45–$43.43 / hourli>Service, diagnose and repair all machine components and systems, including engine/components air conditioning units; change hoses; repair cylinders, buckets, and booms; at customer's jobsite. Regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear.
NewRENTAL SHOP TECHNICIAN Carter Machinery Company, IncRENTAL SHOP TECHNICIANChesapeake, VA$26.46–$37.84 / hourThe Rental Shop Technician is responsible for applying troubleshooting techniques to determine repair procedures, diagnosing basic repairs, and performing light mechanical repairs; inspecting returned equipment and attachments for repairs or maintenance; cleaning returned equipment; and assembling/repairing work tools in a shop environment. Ability to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear.
ELECTRIC POWER GENERATION (EPG) FIELD TECHNICIAN Carter Machinery Company, IncELECTRIC POWER GENERATION (EPG) FIELD TECHNICIANChesapeake, VA$29.51–$41.04 / hourThe Electric Power Generation (EPG) Field Technician position is responsible for accurately diagnosing, troubleshooting and repairing basic operational failures to electrical generator systems and related basic engine failures at customer sites. In addition to base pay, the compensation package may include participation in performance-based incentive programs (e.g., discretionary or non-discretionary plans), as well as overtime eligibility depending on the role.
NewMARINE FIELD TECHNICIAN Carter Machinery Company, IncMARINE FIELD TECHNICIANChesapeake, VA$30.70–$43.43 / hourThe Marine Field Technician is responsible for diagnosing, troubleshooting and performing intermediate level mechanical and electrical repairs and complete overhauls on marine engines and propulsion systems. Minimum two years' experience diagnosing, troubleshooting, and repairing intermediate level mechanical and electrical DOC/DPF/SCR with marine engines and equipment control systems.
NewMARINE APPRENTICE TECHNICIAN Carter Machinery Company, IncMARINE APPRENTICE TECHNICIANChesapeake, VA$20.50–$26.31 / hourul>Ability to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Proficient in the use of a computer, Microsoft Office products and service software required in position; able to complete service reports and provide pertinent details for work orders.
NewELECTRIC POWER GENERATION (EPG) RENTAL TECHNICIAN Carter Machinery Company, IncELECTRIC POWER GENERATION (EPG) RENTAL TECHNICIANChesapeake, VA$26.46–$38.81 / hourThe EPG Rental Technician is responsible for servicing, diagnosing, and repairing EPG rental equipment for power, temperature control, air, pumps and used equipment, at a Carter or customer facility, by performing the following duties. Required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear.
NewRENTAL SHOP TECHNICIAN: 3RD SHIFT Carter Machinery Company, IncRENTAL SHOP TECHNICIAN: 3RD SHIFTChesapeake, VA$26.46–$37.84 / hourThe Rental Shop Technician is responsible for applying troubleshooting techniques to determine repair procedures, diagnosing basic repairs, and performing light mechanical repairs; inspecting returned equipment and attachments for repairs or maintenance; cleaning returned equipment; and assembling/repairing work tools in a shop environment. Ability to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear.
NewProject Manager/Engineering Technician VI - NAVSEA | Norfolk, VA Strategic Technology Institute Inc,Project Manager/Engineering Technician VI - NAVSEA | Norfolk, VANorfolk, VAp>• Direct experiencesupporting submarine PSSE, non-ordnance handling systems, VLS/VPT supportequipment, missile tube loading/handling maintenance platforms, ballast cans,AUR/AURB/AURVS/AURES, TMDs, torpedo shapes, weapon cradles, munitions trailers,or related support equipment. STi is seeking a Project Manager / Engineering Technician VI tosupport MARMC Code 271 Submarine Peculiar Special & Support Equipment(PSSE) support, PSSE program management, non-ordnance handling, and VirginiaClass Weapons Cradle Warehouse support.
NewSenior Engineering Technician V - MARMC | Naval Station Norfolk, VA Strategic Technology Institute Inc,Senior Engineering Technician V - MARMC | Naval Station Norfolk, VANorfolk, VAp>• Direct experiencewith submarine PSSE, non-ordnance handling equipment, VLS/VPT platforms,Missile Tube Loading/Handling Maintenance Platforms, ballast cans,AUR/AURB/AURVS/AURES, TOTEMS, TMDs, weapon cradles, munitions trailers, slings,beams, or weight handling equipment. • Supportmaintenance and operational procedures for AURVS, AURES, Mk 60 AURS, AURBb,ballast cans, TOTEMS, MK-48 fitment shapes, TOMFISH, TMDs, AERO 51 classmunitions trailers, MK-30/MK-34/CNU 308/Mk 793 containers, and relatedPSSE/non-ordnance support equipment.
Quick Service Technician Hendrick Automotive Group CorporateQuick Service TechnicianNorfolk, VirginiaFull timeWhile performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl. Performs lube, oil and filter changes by draining and replacing oil and filter, and lubricating all joints, including idler arm steering knuckles, tie rods ends and ball joints.
CERTIFIED AUTOMOTIVE TECHNICIAN Hendrick Automotive Group CorporateCERTIFIED AUTOMOTIVE TECHNICIANNorfolk, VirginiaFull timeRick Hendrick Cadillac (Norfolk)Location: 6222 Virginia Beach Blvd, Norfolk, Virginia 23502. While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
NewMarine Mechanic Tidewater StaffingMarine MechanicChesapeake, VAJob DescriptionJob DescriptionWe are seeking skilled Shipyard Mechanics and Maintenance Technicians to support shipbuilding, repair, and maintenance operations. The ideal candidates will have hands-on mechanical experience, strong problem-solving skills, and the ability to work safely and efficiently in a shipyard or industrial environment.CVN Engineering Technician (SkillBridge Intern) - 27764 Company ConfidentialCVN Engineering Technician (SkillBridge Intern) - 27764Newport News, VAFull timeFor this internship, the SkillBridge intern will train as an Engineering Technician 3 within HII-Mission Technologies, reporting to a designated HII Supervisor, with the goal of learning the maintenance actions and duties required of our Engineering Technicians in support of the various Newport News Direct Support (NNS DS) customers such as test engineering and trades support within the E84 CVN 74/75 Work Control / Test Department at the Newport News Shipyard. HII Mission Technologies Internship programs are focused on placing transitioning military into internships that require KSAs, Education & Military Training similar to their current or previous military jobs; positions that could easily transition over to a full-time regular and permanent job with HII.Work Control Analyst (Engineering Technician 3) - 27085 Company ConfidentialWork Control Analyst (Engineering Technician 3) - 27085Newport News, VA$54,126–$66,950Full timePerforms detailed mathematical calculations using established formulas; preliminary analyses of data where guidelines are provided in such areas as trajectory adequacy, model dimensional consistency; and quantitative judgments concerning technical data. With a holistic approach to life-cycle maritime defense systems—from small watercraft to submarines, surface combatants and aircraft carriers—HII ensures a high state of readiness.E25 CVN RCOH Work Control Analyst (Engineering Technician 4) - 28388 Company ConfidentialE25 CVN RCOH Work Control Analyst (Engineering Technician 4) - 28388Newport News, VA$68,322–$82,971.20Full timePerforms detailed mathematical calculations using established formulas; preliminary analyses of data where guidelines are provided in such areas as trajectory adequacy, model dimensional consistency; and quantitative judgments concerning technical data. With a holistic approach to life-cycle maritime defense systems—from small watercraft to submarines, surface combatants and aircraft carriers—HII ensures a high state of readiness.Mechanical Technician II Reliability and Performance Technologies LLCMechanical Technician IIChesapeake, VAKnowledge of Maritime Mechanical systems; Navy tag-out, WAF programs and applicable Naval procedures / instructions; Ability to maintain quality and associated documents; Demonstrated ability to mentor junior personnel; Understanding of shipboard Mechanical Machinery Equipment and systems such as main propulsion machinery, auxiliary machinery and hydraulics; Ability to troubleshoot, disassemble, and inspect Hull, Mechanical and Electric (HM&E) equipment; Ability to disassemble, clean, assess and inspect, reassemble and operationally test mechanical systems; Knowledge of mechanical systems components such as valves, bearings, gears, remote operators, couplings, system alignment, etc; Fully versed in the use of all types of precision measuring instruments, such as calipers, micrometers, dial indicators and torque wrenches. We are in search of a skilled and knowledgeable Marine Mechanic to support the inspection, repair, and maintenance of, but not limited to, marine engines, propulsion systems, hydraulic components, and related Hull, mechanical and electrical (HM&E) equipment on board vessels.Mechanical Technician Genex SystemsMechanical TechnicianHampton, VAli>Valid Real ID compliant identification – www.dhs.gov/real-id. The successful candidate will join a team to safely, effectively, and efficiently operate and maintain mechanical systems in NASA LaRC wind tunnels, liquid nitrogen generation plant, and other facilities.Maintenance Mechanical Technician ImerysMaintenance Mechanical TechnicianChesapeake, VirginiaThe Group offers high value-added and functional solutions to a wide range of industries and fast-growing markets such as solutions for the energy transition and sustainable construction, as well as natural solutions for consumer goods. Imerys draws on its understanding of applications, technological knowledge, and expertise in material science to deliver solutions which contribute essential properties to customers’ products and their performance.Maintenance Mechanical Technician Imerys SAMaintenance Mechanical TechnicianChesapeake, VAKnowledge of and capability to troubleshoot gear boxes and drive systems as well as conduct laser alignment coupling alignment • Knowledge of and capability to troubleshoot gear boxes and drive systems as well as conduct laser alignment coupling alignment • Utilize the plants CMMS to enter corrective work found during PMs • Utilize the plants CMMS to enter corrective work found during PMs • Work with the reliability department to use the plants tools to predict failures on pieces of equipment, as well as ideas around preventing failures from reoccurring • Work with the reliability department to use the plants tools to predict failures on pieces of equipment, as well as ideas around preventing failures from reoccurring • Replace/troubleshoot motors and drive systems up to 1500 HP • Replace/troubleshoot motors and drive systems up to 1500 HP • Use experience to offer solutions to repetitive failures • Use experience to offer solutions to repetitive failures • Ability to work with and manage contractors during shutdowns and repairs. • Ability to follow OEM technical installation measurements (bearing clearances, alignment tolerances, etc.) • Ability to follow OEM technical installation measurements (bearing clearances, alignment tolerances, etc.) • Must be able to complete 1G, 2G, 3G, 1F, 2F, and 3F welding certification within 1 year.Mechanical Technician AmentumMechanical TechnicianHampton, VirginiaThe successful candidate will join a team to safely, effectively, and efficiently operate and maintain mechanical systems in NASA LaRC wind tunnels, liquid nitrogen generation plant, and other facilities. The successful candidate will join the Facility Operations team to support the Center Maintenance, Operations, and Engineering Contract (CMOE) located at NASA’s Langley Research Center (LaRC).Mechanical Technician Amentum Services IncMechanical TechnicianHampton, VA$22.59–$33.54 / hourp>Responsibilities: The successful candidate will join a team to safely, effectively, and efficiently operate and maintain mechanical systems in NASA LaRC wind tunnels, liquid nitrogen generation plant, and other facilities. The successful candidate will join the Facility Operations team to support the Center Maintenance, Operations, and Engineering Contract (CMOE) located at NASA's Langley Research Center (LaRC).Mechanical Technician II R&P Technologies, LLCMechanical Technician IIChesapeake, VirginiaResponsibilities: Knowledge of Maritime Mechanical systems; Navy tag-out, WAF programs and applicable Naval procedures / instructions; Ability to maintain quality and associated documents; Demonstrated ability to mentor junior personnel; Understanding of shipboard Mechanical Machinery Equipment and systems such as main propulsion machinery, auxiliary machinery and hydraulics; Ability to troubleshoot, disassemble, and inspect Hull, Mechanical and Electric (HM&E) equipment; Ability to disassemble, clean, assess and inspect, reassemble and operationally test mechanical systems; Knowledge of mechanical systems components such as valves, bearings, gears, remote operators, couplings, system alignment, etc; Fully versed in the use of all types of precision measuring instruments, such as calipers, micrometers, dial indicators and torque wrenches. We are in search of a skilled and knowledgeable Marine Mechanic to support the inspection, repair, and maintenance of, but not limited to, marine engines, propulsion systems, hydraulic components, and related Hull, mechanical and electrical (HM&E) equipment on board vessels.Shipboard Elevator Mechanical Repair Support Technician II Epsilon Systems Solutions IncShipboard Elevator Mechanical Repair Support Technician IINewport News, VAli>Shall be familiar with elevator, door, and conveyor terminology, including the following: Terms defined and used in Naval Ships' Technical Manual (NSTM) Chapter 772, NSTM Chapter 588, NSTM chapter 572, NSTM chapter 300, and MIL-E-17807. Summary: The Shipboard Elevator Mechanical Repair Support Technician is essential for providing technical assistance to the Equipment Support Unit (ESU) during aircraft carrier maintenance, modernization, and overhaul availabilities.Mechanical Technician Classic CollisionMechanical TechnicianNorfolk, VirginiaClassic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Test drive vehicles, and test components and systems, using equipment such as computerized diagnostic devices.Hiring Marine Engineering Technicians and Mechanical Assemblers - (Newport News, VA) SercoHiring Marine Engineering Technicians and Mechanical Assemblers - (Newport News, VA)Portsmouth, VAActual base salary will be determined by a variety of factors, including but not limited to, the scope of the role, relevant experience, job-related knowledge, education and training, key skills, and geographic market considerations. Eligible employees also gain access to a wide range of benefits from comprehensive health coverage and health savings accounts to retirement plans, life and disability insurance, and time-off programs that support work-life balance.Engineering Technician IV - Mechanical (AC/Refrigeration) Life Cycle EngineeringEngineering Technician IV - Mechanical (AC/Refrigeration)Norfolk, VARequired Education, Skills, and Experience:A minimum five (5) years (accumulated within the last seven (7) years) of demonstrated, specialized, hands-on experience working on (i.e., proof of expertise operating, troubleshooting, repairing, maintaining, and assessing US Navy Auxiliary equipment including, but not limited to)High Pressure Manifolds. Demonstrated experience working in the official capacity of a Subject Matter Expert (SME) on the aforementioned systems/equipment/components for a US Navy Engineering Activity, US Navy Shipboard Engineering Department, Original Equipment Manufacturer (OEM), or industrial/commercial equivalent is also required.Mechanical Technician Classic Collision, Inc.Mechanical TechnicianNorfolk, VAp>Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Test drive vehicles, and test components and systems, using equipment such as computerized diagnostic devices.Mechanical Engineer II (Maritime System Focused) Solvere Technical GroupMechanical Engineer II (Maritime System Focused)Virginia Beach, VAp>Job Responsibilities Include: Enclosure and Rack Design: Design and develop equipment racks and shipboard enclosures to military specifications (Mil-Spec) for submarine and surface ship applications. Mechanical engineers in this role research, develop, design, manufacture, and test specialized enclosures, equipment racks, and mechanical interfaces for U.S. Navy navigation system platforms.Mechanical Engineer IV (Maritime System Focused) Solvere Technical GroupMechanical Engineer IV (Maritime System Focused)Virginia Beach, VAp>Job Responsibilities Include: Enclosure and Rack Design: Design and develop equipment racks and shipboard enclosures to military specifications (Mil-Spec) for submarine and surface ship applications. Mechanical engineers in this role research, develop, design, manufacture, and test specialized enclosures, equipment racks, and mechanical interfaces for U.S. Navy navigation system platforms.NewNavy Mechanical Specialist NoblisNavy Mechanical SpecialistNorfolk, Virginia$53,280–$83,320 / yearFull timeRequired Qualifications: Education: Bachelor’s degree or Associate’s degree + 6 years of experienceOR a High School diploma + 8 yearsQuantified, specialized skills such as trade qualifications, manufacturer certifications of training for shipboard related systems, equipment and components may be substituted for up to two (2) years of technician experience for each major qualification or specialized trade skill. The CVN Mechanical Specialist will serve on the Carrier Engineering Maintenance Assist Team (CEMAT), providing hands-on mechanical troubleshooting, maintenance support, and on-the-job training to ship's force personnel aboard CVN-class aircraft carriers.CVN Mechanical Specialist - Galley, Laundry & Auxiliary Systems Noblis IncCVN Mechanical Specialist - Galley, Laundry & Auxiliary SystemsNorfolk, VA$53,280–$83,320 / yearp>The CVN Mechanical Specialist will serve on the Carrier Engineering Maintenance Assist Team (CEMAT), providing hands-on mechanical troubleshooting, maintenance support, and on-the-job training to ship's force personnel aboard CVN-class aircraft carriers. Troubleshoot and repair shipboard galley and scullery equipment (commercial dishwashers, garbage disposals, steam kettles, ovens, mixers) and laundry systems - pumps, valves, bearings, seals, drive assemblies, and mechanical controls.(USA) Facilities Maintenance Manager, Licensed Mechanical Contractor Walmart Inc(USA) Facilities Maintenance Manager, Licensed Mechanical ContractorVIRGINIA BEACH, VA$90,000–$180,000 / yearp>Bachelor's degree in engineering, Architecture, Construction Management, or related field and 3 years' experience in facilities management, construction management, mechanical maintenance, engineering, or related area OR 5 years' experience in facilities management, construction management, mechanical maintenance, engineering, or related area. *Recipical license may apply Licensing requirements vary by state, State mechanical contractor's license, Supervisory experience, Type I and Type II Environmental Protection Agency certification for refrigerant handling.STO Mechanical Test Virginia Class Electric Boat CorpSTO Mechanical Test Virginia ClassNewport News, VAp>Shipyard Test personnel are required to complete and maintain qualifications in the following areas: • Perform watch standing duties to include: operate ships mechanical systems; roving watches required for ship safety, or to monitor mechanical systems required as part of the construction. Our Test Directors abide by the nuclear watchstanding principles that have shaped our STO Pillars: Procedural Compliance, Ownership, Integrity, Level of Knowledge, Backup each other, Formality, and Planning.Electro-Mechanical Rail Maintenance Supervisor *$5,000 Service Bonus* Trans Dist Comm of Hampton RdsElectro-Mechanical Rail Maintenance Supervisor *$5,000 Service Bonus*Norfolk, VirginiaAssociate's Degree/Vocational Training certificate in the Electrical or Electronic technical field and four (4) years of directly related trade experience with a Journeymen electrician license OR High School Diploma or GED with six (6) years of directly related trade experience. Ability to maintain accurate records and correctly use test equipment (voltmeter, ammeter, ohmmeter, oscilloscope, insulation breakdown tester, wire tracer and other equipment as required).Industrial Assembly Facilities Professionals: PMs, Arch & Engineers (Civil, Structural, Mechanical, Electrical) Jacobs Solutions IncIndustrial Assembly Facilities Professionals: PMs, Arch & Engineers (Civil, Structural, Mechanical, Electrical)Newport News, VAp>Philadelphia, Pennsylvania, United States | 39765 | Cities & Places | Drafting and Design | Multiple Locations. Portland, Oregon, United States | 39717 | Advanced Manufacturing | Drafting and Design | Multiple Locations.Mechanical Engineer Marmon HoldingsMechanical EngineerNorfolk, VirginiaWe are seeking a skilled Mechanical Engineer to design, develop, validate, and support the production of advanced fiber optic and telecommunication products for defense and aerospace applications. This position is critical to enhancing our design capability, improving production efficiency, and advancing KITCO’s role as a trusted provider of next-generation connectivity solutions for mission-critical defense platforms.Multi-Craft Maintenance Technician EmergeMulti-Craft Maintenance TechnicianHampton, VA$41.70–$42.70 / hourResponsibilities for the Multicraft Maintenance Technician Job in Hampton, VA include: Perform preventive maintenance on motors, pneumatics, conveyor systems, and production machinery using diagrams, manuals, and engineering specifications. The Multi-Craft Maintenance Technician installs, maintains, troubleshoots, and repairs industrial production equipment and facility infrastructure in a high-precision aerospace/industrial manufacturing environment.NewMaintenance Technician DHRMMaintenance TechnicianVirginia Beach, VirginiaThis role performs routine maintenance, repairs, and preventive tasks on building systems, equipment, and grounds to maintain a clean, safe, and comfortable environment for residents and staff. To be considered for this opportunity, applicants will need to provide their AHP Letter (formerly COD) provided by the Department for Aging & Rehabilitative Services (DARS), or the Department for the Blind & Vision Impaired (DBVI).Senior Maintenance Technician Sentara Healthcare IncSenior Maintenance TechnicianVirginia Beach, VAOperates hand tools and power tools safely and according to manufacturers instructions; uses protective measures to minimize safety risks to self and others while performing job duties; maintains parts, supplies, and equipment; inspects, repairs, or replaces electrical components; monitors fire, sprinkler, and perimeter security alarm systems for abnormal conditions and responds appropriately; issues reports to supervisors via written/electronic means; directs the accomplishment of various contracted services; interfaces with building tenants on a range of issues daily. The Senior Maintenance Technician assists the leadership Corporate Facilities Life Safety Group (Supervisor, Manager, Director) with daily operations, coordination of work, quality and service, achievement of goals and objectives, customer satisfaction, and in meeting regulatory requirements including, including internal construction projects.NewMaintenance Technician Commonwealth of VirginiaMaintenance TechnicianVirginia Beach, VA$40,000–$50,000 / yearThis role performs routine maintenance, repairs, and preventive tasks on building systems, equipment, and grounds to maintain a clean, safe, and comfortable environment for residents and staff. To be considered for this opportunity, applicants will need to provide their AHP Letter (formerly COD) provided by the Department for Aging & Rehabilitative Services (DARS), or the Department for the Blind & Vision Impaired (DBVI).12345678910Similar Job SearchesEquipment Technician Jobs in Virginia Beach, VASystems Engineer Jobs in Virginia Beach, VADevelopment Technician Jobs in Virginia Beach, VAPlanning Engineer Jobs in Virginia Beach, VAField Service Manager Jobs in Virginia Beach, VAProject Engineer Jobs in Virginia Beach, VABuilding Technician Jobs in Virginia Beach, VAOperations Technician Jobs in Virginia Beach, VAMechanical Technician Jobs in Norfolk, VAMechanical Technician Jobs in Chesapeake, VA
CVN Engineering Technician (SkillBridge Intern) - 27764 Company ConfidentialCVN Engineering Technician (SkillBridge Intern) - 27764Newport News, VAFull timeFor this internship, the SkillBridge intern will train as an Engineering Technician 3 within HII-Mission Technologies, reporting to a designated HII Supervisor, with the goal of learning the maintenance actions and duties required of our Engineering Technicians in support of the various Newport News Direct Support (NNS DS) customers such as test engineering and trades support within the E84 CVN 74/75 Work Control / Test Department at the Newport News Shipyard. HII Mission Technologies Internship programs are focused on placing transitioning military into internships that require KSAs, Education & Military Training similar to their current or previous military jobs; positions that could easily transition over to a full-time regular and permanent job with HII.
Work Control Analyst (Engineering Technician 3) - 27085 Company ConfidentialWork Control Analyst (Engineering Technician 3) - 27085Newport News, VA$54,126–$66,950Full timePerforms detailed mathematical calculations using established formulas; preliminary analyses of data where guidelines are provided in such areas as trajectory adequacy, model dimensional consistency; and quantitative judgments concerning technical data. With a holistic approach to life-cycle maritime defense systems—from small watercraft to submarines, surface combatants and aircraft carriers—HII ensures a high state of readiness.
E25 CVN RCOH Work Control Analyst (Engineering Technician 4) - 28388 Company ConfidentialE25 CVN RCOH Work Control Analyst (Engineering Technician 4) - 28388Newport News, VA$68,322–$82,971.20Full timePerforms detailed mathematical calculations using established formulas; preliminary analyses of data where guidelines are provided in such areas as trajectory adequacy, model dimensional consistency; and quantitative judgments concerning technical data. With a holistic approach to life-cycle maritime defense systems—from small watercraft to submarines, surface combatants and aircraft carriers—HII ensures a high state of readiness.
Mechanical Technician II Reliability and Performance Technologies LLCMechanical Technician IIChesapeake, VAKnowledge of Maritime Mechanical systems; Navy tag-out, WAF programs and applicable Naval procedures / instructions; Ability to maintain quality and associated documents; Demonstrated ability to mentor junior personnel; Understanding of shipboard Mechanical Machinery Equipment and systems such as main propulsion machinery, auxiliary machinery and hydraulics; Ability to troubleshoot, disassemble, and inspect Hull, Mechanical and Electric (HM&E) equipment; Ability to disassemble, clean, assess and inspect, reassemble and operationally test mechanical systems; Knowledge of mechanical systems components such as valves, bearings, gears, remote operators, couplings, system alignment, etc; Fully versed in the use of all types of precision measuring instruments, such as calipers, micrometers, dial indicators and torque wrenches. We are in search of a skilled and knowledgeable Marine Mechanic to support the inspection, repair, and maintenance of, but not limited to, marine engines, propulsion systems, hydraulic components, and related Hull, mechanical and electrical (HM&E) equipment on board vessels.
Mechanical Technician Genex SystemsMechanical TechnicianHampton, VAli>Valid Real ID compliant identification – www.dhs.gov/real-id. The successful candidate will join a team to safely, effectively, and efficiently operate and maintain mechanical systems in NASA LaRC wind tunnels, liquid nitrogen generation plant, and other facilities.
Maintenance Mechanical Technician ImerysMaintenance Mechanical TechnicianChesapeake, VirginiaThe Group offers high value-added and functional solutions to a wide range of industries and fast-growing markets such as solutions for the energy transition and sustainable construction, as well as natural solutions for consumer goods. Imerys draws on its understanding of applications, technological knowledge, and expertise in material science to deliver solutions which contribute essential properties to customers’ products and their performance.
Maintenance Mechanical Technician Imerys SAMaintenance Mechanical TechnicianChesapeake, VAKnowledge of and capability to troubleshoot gear boxes and drive systems as well as conduct laser alignment coupling alignment • Knowledge of and capability to troubleshoot gear boxes and drive systems as well as conduct laser alignment coupling alignment • Utilize the plants CMMS to enter corrective work found during PMs • Utilize the plants CMMS to enter corrective work found during PMs • Work with the reliability department to use the plants tools to predict failures on pieces of equipment, as well as ideas around preventing failures from reoccurring • Work with the reliability department to use the plants tools to predict failures on pieces of equipment, as well as ideas around preventing failures from reoccurring • Replace/troubleshoot motors and drive systems up to 1500 HP • Replace/troubleshoot motors and drive systems up to 1500 HP • Use experience to offer solutions to repetitive failures • Use experience to offer solutions to repetitive failures • Ability to work with and manage contractors during shutdowns and repairs. • Ability to follow OEM technical installation measurements (bearing clearances, alignment tolerances, etc.) • Ability to follow OEM technical installation measurements (bearing clearances, alignment tolerances, etc.) • Must be able to complete 1G, 2G, 3G, 1F, 2F, and 3F welding certification within 1 year.
Mechanical Technician AmentumMechanical TechnicianHampton, VirginiaThe successful candidate will join a team to safely, effectively, and efficiently operate and maintain mechanical systems in NASA LaRC wind tunnels, liquid nitrogen generation plant, and other facilities. The successful candidate will join the Facility Operations team to support the Center Maintenance, Operations, and Engineering Contract (CMOE) located at NASA’s Langley Research Center (LaRC).
Mechanical Technician Amentum Services IncMechanical TechnicianHampton, VA$22.59–$33.54 / hourp>Responsibilities: The successful candidate will join a team to safely, effectively, and efficiently operate and maintain mechanical systems in NASA LaRC wind tunnels, liquid nitrogen generation plant, and other facilities. The successful candidate will join the Facility Operations team to support the Center Maintenance, Operations, and Engineering Contract (CMOE) located at NASA's Langley Research Center (LaRC).
Mechanical Technician II R&P Technologies, LLCMechanical Technician IIChesapeake, VirginiaResponsibilities: Knowledge of Maritime Mechanical systems; Navy tag-out, WAF programs and applicable Naval procedures / instructions; Ability to maintain quality and associated documents; Demonstrated ability to mentor junior personnel; Understanding of shipboard Mechanical Machinery Equipment and systems such as main propulsion machinery, auxiliary machinery and hydraulics; Ability to troubleshoot, disassemble, and inspect Hull, Mechanical and Electric (HM&E) equipment; Ability to disassemble, clean, assess and inspect, reassemble and operationally test mechanical systems; Knowledge of mechanical systems components such as valves, bearings, gears, remote operators, couplings, system alignment, etc; Fully versed in the use of all types of precision measuring instruments, such as calipers, micrometers, dial indicators and torque wrenches. We are in search of a skilled and knowledgeable Marine Mechanic to support the inspection, repair, and maintenance of, but not limited to, marine engines, propulsion systems, hydraulic components, and related Hull, mechanical and electrical (HM&E) equipment on board vessels.
Shipboard Elevator Mechanical Repair Support Technician II Epsilon Systems Solutions IncShipboard Elevator Mechanical Repair Support Technician IINewport News, VAli>Shall be familiar with elevator, door, and conveyor terminology, including the following: Terms defined and used in Naval Ships' Technical Manual (NSTM) Chapter 772, NSTM Chapter 588, NSTM chapter 572, NSTM chapter 300, and MIL-E-17807. Summary: The Shipboard Elevator Mechanical Repair Support Technician is essential for providing technical assistance to the Equipment Support Unit (ESU) during aircraft carrier maintenance, modernization, and overhaul availabilities.
Mechanical Technician Classic CollisionMechanical TechnicianNorfolk, VirginiaClassic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Test drive vehicles, and test components and systems, using equipment such as computerized diagnostic devices.
Hiring Marine Engineering Technicians and Mechanical Assemblers - (Newport News, VA) SercoHiring Marine Engineering Technicians and Mechanical Assemblers - (Newport News, VA)Portsmouth, VAActual base salary will be determined by a variety of factors, including but not limited to, the scope of the role, relevant experience, job-related knowledge, education and training, key skills, and geographic market considerations. Eligible employees also gain access to a wide range of benefits from comprehensive health coverage and health savings accounts to retirement plans, life and disability insurance, and time-off programs that support work-life balance.
Engineering Technician IV - Mechanical (AC/Refrigeration) Life Cycle EngineeringEngineering Technician IV - Mechanical (AC/Refrigeration)Norfolk, VARequired Education, Skills, and Experience:A minimum five (5) years (accumulated within the last seven (7) years) of demonstrated, specialized, hands-on experience working on (i.e., proof of expertise operating, troubleshooting, repairing, maintaining, and assessing US Navy Auxiliary equipment including, but not limited to)High Pressure Manifolds. Demonstrated experience working in the official capacity of a Subject Matter Expert (SME) on the aforementioned systems/equipment/components for a US Navy Engineering Activity, US Navy Shipboard Engineering Department, Original Equipment Manufacturer (OEM), or industrial/commercial equivalent is also required.
Mechanical Technician Classic Collision, Inc.Mechanical TechnicianNorfolk, VAp>Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Test drive vehicles, and test components and systems, using equipment such as computerized diagnostic devices.
Mechanical Engineer II (Maritime System Focused) Solvere Technical GroupMechanical Engineer II (Maritime System Focused)Virginia Beach, VAp>Job Responsibilities Include: Enclosure and Rack Design: Design and develop equipment racks and shipboard enclosures to military specifications (Mil-Spec) for submarine and surface ship applications. Mechanical engineers in this role research, develop, design, manufacture, and test specialized enclosures, equipment racks, and mechanical interfaces for U.S. Navy navigation system platforms.
Mechanical Engineer IV (Maritime System Focused) Solvere Technical GroupMechanical Engineer IV (Maritime System Focused)Virginia Beach, VAp>Job Responsibilities Include: Enclosure and Rack Design: Design and develop equipment racks and shipboard enclosures to military specifications (Mil-Spec) for submarine and surface ship applications. Mechanical engineers in this role research, develop, design, manufacture, and test specialized enclosures, equipment racks, and mechanical interfaces for U.S. Navy navigation system platforms.
NewNavy Mechanical Specialist NoblisNavy Mechanical SpecialistNorfolk, Virginia$53,280–$83,320 / yearFull timeRequired Qualifications: Education: Bachelor’s degree or Associate’s degree + 6 years of experienceOR a High School diploma + 8 yearsQuantified, specialized skills such as trade qualifications, manufacturer certifications of training for shipboard related systems, equipment and components may be substituted for up to two (2) years of technician experience for each major qualification or specialized trade skill. The CVN Mechanical Specialist will serve on the Carrier Engineering Maintenance Assist Team (CEMAT), providing hands-on mechanical troubleshooting, maintenance support, and on-the-job training to ship's force personnel aboard CVN-class aircraft carriers.
CVN Mechanical Specialist - Galley, Laundry & Auxiliary Systems Noblis IncCVN Mechanical Specialist - Galley, Laundry & Auxiliary SystemsNorfolk, VA$53,280–$83,320 / yearp>The CVN Mechanical Specialist will serve on the Carrier Engineering Maintenance Assist Team (CEMAT), providing hands-on mechanical troubleshooting, maintenance support, and on-the-job training to ship's force personnel aboard CVN-class aircraft carriers. Troubleshoot and repair shipboard galley and scullery equipment (commercial dishwashers, garbage disposals, steam kettles, ovens, mixers) and laundry systems - pumps, valves, bearings, seals, drive assemblies, and mechanical controls.
(USA) Facilities Maintenance Manager, Licensed Mechanical Contractor Walmart Inc(USA) Facilities Maintenance Manager, Licensed Mechanical ContractorVIRGINIA BEACH, VA$90,000–$180,000 / yearp>Bachelor's degree in engineering, Architecture, Construction Management, or related field and 3 years' experience in facilities management, construction management, mechanical maintenance, engineering, or related area OR 5 years' experience in facilities management, construction management, mechanical maintenance, engineering, or related area. *Recipical license may apply Licensing requirements vary by state, State mechanical contractor's license, Supervisory experience, Type I and Type II Environmental Protection Agency certification for refrigerant handling.
STO Mechanical Test Virginia Class Electric Boat CorpSTO Mechanical Test Virginia ClassNewport News, VAp>Shipyard Test personnel are required to complete and maintain qualifications in the following areas: • Perform watch standing duties to include: operate ships mechanical systems; roving watches required for ship safety, or to monitor mechanical systems required as part of the construction. Our Test Directors abide by the nuclear watchstanding principles that have shaped our STO Pillars: Procedural Compliance, Ownership, Integrity, Level of Knowledge, Backup each other, Formality, and Planning.
Electro-Mechanical Rail Maintenance Supervisor *$5,000 Service Bonus* Trans Dist Comm of Hampton RdsElectro-Mechanical Rail Maintenance Supervisor *$5,000 Service Bonus*Norfolk, VirginiaAssociate's Degree/Vocational Training certificate in the Electrical or Electronic technical field and four (4) years of directly related trade experience with a Journeymen electrician license OR High School Diploma or GED with six (6) years of directly related trade experience. Ability to maintain accurate records and correctly use test equipment (voltmeter, ammeter, ohmmeter, oscilloscope, insulation breakdown tester, wire tracer and other equipment as required).
Industrial Assembly Facilities Professionals: PMs, Arch & Engineers (Civil, Structural, Mechanical, Electrical) Jacobs Solutions IncIndustrial Assembly Facilities Professionals: PMs, Arch & Engineers (Civil, Structural, Mechanical, Electrical)Newport News, VAp>Philadelphia, Pennsylvania, United States | 39765 | Cities & Places | Drafting and Design | Multiple Locations. Portland, Oregon, United States | 39717 | Advanced Manufacturing | Drafting and Design | Multiple Locations.
Mechanical Engineer Marmon HoldingsMechanical EngineerNorfolk, VirginiaWe are seeking a skilled Mechanical Engineer to design, develop, validate, and support the production of advanced fiber optic and telecommunication products for defense and aerospace applications. This position is critical to enhancing our design capability, improving production efficiency, and advancing KITCO’s role as a trusted provider of next-generation connectivity solutions for mission-critical defense platforms.
Multi-Craft Maintenance Technician EmergeMulti-Craft Maintenance TechnicianHampton, VA$41.70–$42.70 / hourResponsibilities for the Multicraft Maintenance Technician Job in Hampton, VA include: Perform preventive maintenance on motors, pneumatics, conveyor systems, and production machinery using diagrams, manuals, and engineering specifications. The Multi-Craft Maintenance Technician installs, maintains, troubleshoots, and repairs industrial production equipment and facility infrastructure in a high-precision aerospace/industrial manufacturing environment.
NewMaintenance Technician DHRMMaintenance TechnicianVirginia Beach, VirginiaThis role performs routine maintenance, repairs, and preventive tasks on building systems, equipment, and grounds to maintain a clean, safe, and comfortable environment for residents and staff. To be considered for this opportunity, applicants will need to provide their AHP Letter (formerly COD) provided by the Department for Aging & Rehabilitative Services (DARS), or the Department for the Blind & Vision Impaired (DBVI).
Senior Maintenance Technician Sentara Healthcare IncSenior Maintenance TechnicianVirginia Beach, VAOperates hand tools and power tools safely and according to manufacturers instructions; uses protective measures to minimize safety risks to self and others while performing job duties; maintains parts, supplies, and equipment; inspects, repairs, or replaces electrical components; monitors fire, sprinkler, and perimeter security alarm systems for abnormal conditions and responds appropriately; issues reports to supervisors via written/electronic means; directs the accomplishment of various contracted services; interfaces with building tenants on a range of issues daily. The Senior Maintenance Technician assists the leadership Corporate Facilities Life Safety Group (Supervisor, Manager, Director) with daily operations, coordination of work, quality and service, achievement of goals and objectives, customer satisfaction, and in meeting regulatory requirements including, including internal construction projects.
NewMaintenance Technician Commonwealth of VirginiaMaintenance TechnicianVirginia Beach, VA$40,000–$50,000 / yearThis role performs routine maintenance, repairs, and preventive tasks on building systems, equipment, and grounds to maintain a clean, safe, and comfortable environment for residents and staff. To be considered for this opportunity, applicants will need to provide their AHP Letter (formerly COD) provided by the Department for Aging & Rehabilitative Services (DARS), or the Department for the Blind & Vision Impaired (DBVI).