NewFacilities Technician (Second Shift) Rocket EMSFacilities Technician (Second Shift)Santa Clara, CA$23–$28 / hourPay Range $23—$28 USD ITAR/EAR Compliance: Due to the nature of the work performed at Rocket EMS, this position may require access to export-controlled technical data or technology. You'll perform preventive and corrective maintenance across HVAC, electrical, plumbing, compressed air, and general building systems, while supporting production teams with facility-related needs.
Electro-Mechanical Assembler Teledyne Technologies IncElectro-Mechanical AssemblerNewark, CA$27–$37 / hourThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position.
NewMechanical Technician Apidel TechnologiesMechanical TechnicianFremont, CAContractorPerforms administrative functions, i.e. requisitioning, purchasing, production accounting, and payroll record-keeping (closure of POs and receiving / time inputting) Safety and Regulatory Compliance Requires 100% compliance with all Airgas safety policy and procedures, and cGMP (current Good Manufacturing Practices) training and techniques to prevent lost time or serious injury to others. Prepares and maintains accurate records in accordance with all safety, quality, regulatory and production requirements, such as plant readings, plant maintenance, instrument calibrations, etc Identifies potential problems from collected data Determines if immediate maintenance action is required and acts appropriately.
Automotive Service Technician Bird Kultgen FordAutomotive Service TechnicianSan Francisco, California$25–$45 / hourBay Area technicians are among the most skilled in the country, but the cost of living in San Francisco and surrounding cities can make long-term financial growth difficult. We are growing our service department and looking for skilled Automotive Service Technicians ready to build a lasting career with the Ford brand.
Robot Prototype Technician Physical IntelligenceRobot Prototype TechnicianSan Francisco, CaliforniaIn this role you will use skills with assembly, fabrication, electronics, and troubleshooting to build initial robot designs, identify design flaws for improvement in future design iterations, propose solutions for improvements regarding build, maintenance, and repair of robots. Assembly and disassembly skills on electromechanical systems - Proficiency with electrical systems/components (AC/DC motors, wiring, controllers) and mechanical systems/components (motors, gears, Bearings).
NewData Center Facilities Technician (HVAC / Electrical) Cyxtera Technologies IncData Center Facilities Technician (HVAC / Electrical)Sunnyvale, CA$70,000–$90,000 / yearResponsible for complex operations, data processing hardware installation projects, maintenance, troubleshooting and repair of electrical, mechanical systems and components to support complex data center infrastructure. Operational experience with Data Center equipment that includes but not limited to switchgear, generators, UPS, PDU, Chillers, RTU, CRAH/CRAC, Chilled Water systems, and VESDA.
Robotics Service Technician Physical IntelligenceRobotics Service TechnicianSan Francisco, CaliforniaElectrical Maintenance: Repair electrical systems including wiring, circuits, power supplies, sensors, and control systems; conduct regular electrical inspections and preventive maintenance on robotic units. Diagnostics & Testing: Perform tests using diagnostic tools, multimeters, oscilloscopes, and specialized equipment; interpret electrical schematics and wiring diagrams to locate and resolve issues.
AUTOMOTIVE TECHNICIAN II State Of CaliforniaAUTOMOTIVE TECHNICIAN IISanta Clara, CA$4,346–$5,721For needed repairs; maintain both manual and computer records on maintenance and servicing of a fleet of vehicles; maintain and inventory tools and equipment; inventory, maintain, and order automotive parts and supplies; processing of invoices. Maintain a fleet of vehicles; perform preventative maintenance, schedule and verify maintenance and repair, make mechanical and electrical repairs and adjustments, diagnose and inspect motor vehicle and accessories.
MET Technician Steer Automotive Group LtdMET TechnicianCABenefits App - virtual GP appointments, employee assistance programme (EAP), cycle to work, high street discounts, discounted vehicle maintenance & repairs and so much more! We're looking for a skilled and detail-focused MET Technician to join our team and play a vital role in restoring vehicles to pre-accident condition.
Print Manufacturing Equipment Maintenance Technician - 3rd shift Infineon Technologies AGPrint Manufacturing Equipment Maintenance Technician - 3rd shiftMorgan Hill, CACSS delivers microcontrollers plus Wi-Fi, Bluetooth and combined connectivity solutions (known as connectivity combos) along with hardware-based security technologies to power the broadest application spectrum spanning consumer electronics, IoT devices, cloud security, IT equipment, home appliances, connected cars, credit and debit cards, electronic passports, ID cards, and more. Set production schedules based on product introduction, equipment efficiency, materials supply, staffing resources, and volume required to meet demand, ensuring maximum production quantity and quality.
Mechanical Technician - night shift FST Technical ServicesMechanical Technician - night shiftSanta Clara, CAFull timeThink of us as your trusted partner for QA/QC Services , Equipment Services , Technical Staffing , Project Management , Testing Services – virtually anything you might need throughout your project lifecycle. FST Technical Services was founded in 1984 to serve the needs of the growing, worldwide Semiconductor/Microelectronics and Life Sciences industries.
Equipment Technician, Manufacturing Stealth-mode Battery StartupEquipment Technician, ManufacturingSan Jose, CaliforniaThis role is responsible for troubleshooting equipment issues, performing preventive maintenance, supporting new equipment installations, and helping maintain safe and reliable manufacturing operations. As part of a small team, you will work closely with engineers, operators, and production personnel to support manufacturing success and help scale our operations.
SkillBridge Data Center Operations Technician CoreSite Realty CorpSkillBridge Data Center Operations TechnicianSanta Clara, CASkills: Minimum of 2 years experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD's and Pumps, HVAC equipment, CRAC/CRAH's, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, Double Interlock Pre-Action Systems, Communications cabling, Cabling infrastructure, Network infrastructure and hardware Experience laying out, pulling, dressing, and terminating fiber and copper communications cabling. These systems include, transformers, PLC's, generators, switchgear, UPS systems, STS', ATS' PDU's, chilled water systems, CRAC/CRAH, wet sprinkler systems and pre-action sprinkler, network equipment, transmission media, cabling infrastructure, security hardware, and CCTV.
Diesel Technician/Mechanic II Penske CorporationDiesel Technician/Mechanic IISouth San Francisco, CAWillingness to travel as necessary within the district (customers' yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening. Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward.
Electromechanical Technician Joby Aviation IncElectromechanical TechnicianSan Carlos, CA$36–$52 / hourJoby Aviation is seeking a Detail-oriented and passionate electro-mechanical technician to join our powertrain team and help build flight-critical components for our VTOL electric aircraft. Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most.
Engineering Technician - Battery Test Stealth-mode Battery StartupEngineering Technician - Battery TestSan Jose, CaliforniaExecute battery tests including: Performance characterization, Cycle life and aging, Rate capability, Power and resistance testing, Environmental and thermal testing, Validation and durability testing. This role is highly hands-on and focused on building, operating, maintaining, and troubleshooting battery test systems while working closely with test engineers and cross-functional engineering teams.
Natural Resources Operations Technician I Rhode Island Department of Environmental ManagementNatural Resources Operations Technician IBurlingame, California$26.16–$27.70 / hourTo assist with the development and maintenance of public access facilities such as informational signs, kiosks, check stations, roads, parking areas, beaches, lawns, picnic areas, campsites, restrooms, bike paths, trails, fences, gates, water control structures, fishways, dams, and equipment storage facilities. To perform general maintenance tasks at facilities and properties owned by or under the control of the Department of Environmental Management, including but not limited to mowing lawns, raking, picking up trash, cleaning restrooms, moving furniture, brush cutting, planting shrubs, transplanting, cutting, and pruning.
Mechanical Engineer 5 Lam Research CorpMechanical Engineer 5Fremont, CA$125,000–$270,000 / yearWho we're looking for BS, MS, or PhD degree in mechanical engineering Approximately 12 years of related experience with a Bachelor's degree; or 10 years with a Master's degree; or a PhD with 8 years experience Strong oral communication, written, and presentation skills in English 3D CAD proficiency (Siemens NX preferred, PTC Creo also a plus) FEA proficiency (NX Nastran structural and thermal preferred) Experience with vacuum chamber/system design Able to perform complex tolerance stack up analysis Familiar with various engineering materials and typical manufacturing methods: low loss tangent ceramics, aluminum alloys, stainless alloys, quartz, engineering plastics, elastomers, etc Experience with optical system design and precision motion control components (linear and rotational stages, motors/encoders, sensors, etc.) Experience with instrument control and data acquisition tools/scripting languages like LabView, MATLAB, Python, VB.NET, etc. preferred Understanding of system-level operation including controls, sensors, and interlocks Self-motivated individual with hands-on laboratory experience and can-do attitude Proficient with Microsoft Office Applications (PowerPoint, Excel, Word, Outlook, MS Teams) and Sharepoint Prior experience working in a C&F/R&D role preferred Etch and Deposition hardware, RF plasma, ALE, and ALD experience preferred Strong team player who enjoys working with motivated coworkers in fast-paced environment Be flexible to change in a dynamic and continuous learning environment ## Preferred qualifications Semiconductor industry experience is not required, but a plus ## Our commitment We believe it is important for every person to feel valued, included, and empowered to achieve their full potential.
Electromechanical Technician Joby AviationElectromechanical TechnicianSan Carlos, California$36–$52 / hourFull timeOverview: Joby Aviation is seeking a Detail-oriented and passionate electro-mechanical technician to join our powertrain team and help build flight-critical components for our VTOL electric aircraft. Company Overview: Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most.
NewData Center Operations Technician I (Swing) (SV4) CoreSite Realty CorpData Center Operations Technician I (Swing) (SV4)Santa Clara, CA$25–$28 / hournot limited to the following: electrical distribution and layout, transformers, PLC's, generators, switchgear, UPS systems, STS', ATS' PDU's, chilled water systems, CRAC/CRAH's, pre-action sprinkler systems, security hardware, CCTV, monitoring, and. At CoreSite, we're not just building state-of-the-art infrastructure-we're creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences.
NewService Technician 1 Clean Energy Fuels CorpService Technician 1Palo Alto, CA$28–$42 / hourInspect, maintain, and perform minor to moderate repairs on "Compressed Natural Gas" (CNG), "Liquefied Natural Gas" (LNG), and/or "Liquid to Compressed Natural Gas" (LCNG) fueling equipment, including compressors, dispensers, priority panels, dryers, storage tanks and other related equipment. During inspections, Service Technician I will identify corrective action and/or proactive maintenance service actions required on CNG / LNG / LCNG equipment and generate service orders for completion or assignment to Service Tech II, III, or Master Technicians.
New Products Mechanical Design Engineer Zipline International IncNew Products Mechanical Design EngineerSouth San Francisco, CAOur customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. Required logistics: This role is onsite at our engineering lab/manufacturing campus with frequent hands-on build and test work; expect regular participation in flight-test campaigns and periodic travel (program-dependent) to launch/field sites.
Systems Engineer - Mechanical Lyten IncSystems Engineer - MechanicalSan Jose, CA$116,600–$175,000 / yearLyten is leading an industrial revolution through Lyten 3D Graphene, a breakthrough supermaterial unlocking a new generation of products - from lithium-sulfur batteries and energy storage systems to concrete admixtures, lightweight composites, and next-generation sensors that are revolutionizing industries. Demonstrated knowledge and experience in applying analytical techniques to propose concepts, design of experiment or method, evaluate feasibility, characterize, and improve systems, and release high volume manufactured equipment.
Robotics Engineering Technician, Actuators, Optimus Tesla IncRobotics Engineering Technician, Actuators, OptimusPalo Alto, CA$24.40–$65.40 / hourCommunicate effectively with cross-functional teams, including design, reliability, and Test Engineers, to identify and resolve technical issues and improve product design. Along with competitive pay, as a full-time Tesla employee, you are eligible for the following benefits at day 1 of hire: Medical plans > plan options with $0 payroll deduction.
Junior Technician Rhoda aiJunior TechnicianPalo Alto, CaliforniaWe're not building a feature; we're building a new computing platform for physical work — and with over $400M raised, we're investing aggressively in the R&D, hardware development, and manufacturing scale-up to make that a reality. We work at the intersection of large-scale learning, robotics, and systems, with a research team that includes researchers from Stanford, Berkeley, Harvard, and beyond.
Microelectronics Assembly Technician Computer Task Group, IncMicroelectronics Assembly TechnicianSan Jose, CA$35–$45 / hourAssemble microelectronic components using precision assembly techniques, including wire bonding processes and adhesive-based component bonding. About CTG CTG, a Cegeka company, delivers IT and business solutions that enhance clients' digital agility, empowering them to seize new opportunities and overcome any challenge.
Robot Service Technician Afternoon Shift Figure AI IncRobot Service Technician Afternoon ShiftSan Jose, CA$35–$65 / hourRequirements: 3+ years experience working with complex systems Familiarity with computer based tools such as but not limited to CMD prompt, Google Suite, in house development GUI's Familiarity with electrical hardware based diagnostic tools such as but not limited to Scope, Digital MultiMeter, Current Probes Familiarity with torque tools and mechanical assembly Ability to read PCB and Harness schematics Full system architecture diagnostic experience and organized diagnostic processes Ability to remove and replace mechanical components up to 50lbs Great attitude and excited to face challenges. Responsibilities: • Perform routine maintenance and inspections of the humanoid robot fleet • Proficient in troubleshooting mechanical, electrical and software-based issues • Work closely with engineering, build, validation and fabrication teams to resolve issues quickly • Maintain detailed and accurate records of all maintenance and repairs • Develop tools and document diagnostic procedures for process improvement • Occasional travel to customer or development partner sites • Ability to follow assembly documentation • Ability to work under short timelines when needed.
NewEquipment Service Technician II Steris PlcEquipment Service Technician IISan Francisco, CA$80,537.50–$104,225 / yearWork with cross functional teams (Tech Support, Engineering and Service Contract Management), to escalate issues appropriately and utilizes advanced technology platforms to complete compliance regulatory requirements, and resolve and document troubleshooting issues. Manage time effectively by prioritizing Customer and business needs and schedules autonomously to complete PM performance, service calls, warranty calls, equipment installations, field upgrade programs and other duties.
Field Service Technician – Hayward, California Culligan QuenchField Service Technician – Hayward, CaliforniaHayward, CaliforniaOur bottle-free water coolers, ice machines, sparkling water dispensers and coffee brewers purify the existing water supply, providing an endless supply of clean water and water-based beverages for a fixed monthly fee, typically under a long term bundled service and rental subscription agreement. We play a front-line role in the battle against single-use plastic water bottles by delivering on-demand filtered water solutions to more than 120,000 healthy and environmentally conscious customers across North America.
Robotics Assembly Technician : 26-01850 Akraya Inc.Robotics Assembly Technician : 26-01850Any City, CA$19–$20 / hourMost recently, we were recognized Stevie Employer of the Year 2025, SIA Best Staffing Firm to work for 2025, Inc 5000 Best Workspaces in US (2025 & 2024) and Glassdoor's Best Places to Work (2023 & 2022)! Primary Skills: Mechanical assembly (advanced), Low voltage electrical (intermediate), Tool usage (advanced), Troubleshooting (intermediate), Basic computer skills (intermediate).
Jr Robot Service Technician Figure AI IncJr Robot Service TechnicianSan Jose, CAPhysical Requirements: Lifting & Handling: Must be able to safely lift, carry, and maneuver equipment or humanoid hardware weighing up to 50 lbs independently. Sustained Mobility: Ability to stand and move throughout the work area for the entirety of an 8+ hour shift (excluding meal/rest breaks).
Engineering Technician, Actuators, Optimus Tesla IncEngineering Technician, Actuators, OptimusPalo Alto, CA$24.40–$65.40 / hourCommunicate effectively with cross-functional teams, including design, reliability, and Test Engineers, to identify and resolve technical issues and improve product design. Along with competitive pay, as a full-time Tesla employee, you are eligible for the following benefits at day 1 of hire: Medical plans > plan options with $0 payroll deduction.
Robot Service Technician Night Shift Figure AI IncRobot Service Technician Night ShiftSan Jose, CA$35–$65 / hourRequirements 3+ years experience working with complex systems Familiarity with computer based tools such as but not limited to CMD prompt, Google Suite, in house development GUI's Familiarity with electrical hardware based diagnostic tools such as but not limited to Scope, Digital MultiMeter, Current Probes Familiarity with torque tools and mechanical assembly Ability to read PCB and Harness schematics Full system architecture diagnostic experience and organized diagnostic processes Ability to remove and replace mechanical components up to 50lbs Great attitude and excited to face challenges. Responsibilities • Perform routine maintenance and inspections of the humanoid robot fleet • Proficient in troubleshooting mechanical, electrical and software-based issues • Work closely with engineering, build, validation and fabrication teams to resolve issues quickly • Maintain detailed and accurate records of all maintenance and repairs • Develop tools and document diagnostic procedures for process improvement • Occasional travel to customer or development partner sites • Ability to follow assembly documentation • Ability to work under short timelines when needed.
Materials Technician CarbonMaterials TechnicianSunnyvale, CA$28.99–$37.64 / hourBy clicking the "APPLY FOR THIS JOB" button and submitting your job application, you agree you have reviewed the complete Privacy Notice for Employees, Independent Contractors and Job Applicants, which explains the categories of personal information we collect about you, the purposes for which the categories of personal information shall be used and your rights with respect to our use of such personal Information. By clicking the "APPLY NOW" button and submitting your job application, you agree you have reviewed the complete Privacy Notice for Employees, Independent Contractors and Job Applicants, which explains the categories of personal information we collect about you, the purposes for which the categories of personal information shall be used and your rights with respect to our use of such personal Information.
NewVehicle Service Technician Global Medical Response IncVehicle Service TechnicianBurlingame, CAGMR's Core Behaviors-keep care at the center, raise your hand, seek to understand, find a way together and be accountable-unite our teams and set us apart in emergency medical services. Manage daily vehicle inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log and place replacement requests when necessary.
Senior NPI Technician (Opto-Electromechanical) Halo Industries, Inc.Senior NPI Technician (Opto-Electromechanical)Santa Clara, CA$40–$45 / hourNPI Technician (opto-electromechanical) is supporting the transition of new products from the development team to pilot manufacturing, ensuring manufacturability, quality, manufacturing process testing, and successful launch of our complex machines. This role is at the intersection of design and manufacturing and therefore involves collaboration with design, manufacturing, and quality teams to identify potential issues, develop solutions, and implement processes for a smooth New Product Introduction (NPI).
Production Technician Unchained Labs LLCProduction TechnicianPleasanton, CA$25–$38 / hourAssemble, route, and secure electrical wiring, ribbon cables, flexible circuits, sensors, and printed circuit boards while maintaining proper cable management and workmanship. Assemble complex electromechanical, fluidic, optical, and mechanical subassemblies and complete instruments by following manufacturing work instructions, engineering drawings, bills of materials, and quality documentation.
Production Technician & Equipment Operator Xona Space SystemsProduction Technician & Equipment OperatorBurlingame, California2+ years of experience operating and running production equipment and machines; environmental chambers, mechanical deployment fixtures, complex lifting equipment, vibration/shock/thermal cycling testing, 3D printers, chamber testing, etc. Set up tooling, fixtures and instrumentation and run repeatable production tests on dedicated equipment typically found in spacecraft production: (vibration tables, thermal chambers, TVAC chambers, deployment fixtures, etc.).
End of Line Technician Mainspring EnergyEnd of Line TechnicianMenlo Park, CaliforniaYou will perform mechanical and electronics assembly, diagnostics, retrofits, functional testing, core validation, emissions testing, and electronics box (eBox) testing, primarily in-house, with limited field work to support on-site testing or retrofit activities. Testing & Validation: Execute comprehensive testing, including core validation, emissions testing, eBox testing, and general generator system functional testing across lab, production, and limited field environments.
Assembly Technician IV Ultra Clean Technology Systems & Svc IncAssembly Technician IVHayward, CA$26.20–$39.38 / hourPart timeThe pay range for this position at commencement of employment is expected to be between $26.20 and $39.38/hour; however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. If hired, employee will be in an “at-will position” and the Company reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors.
NewProduction Technician & Equipment Operator Xona Space Systems, Inc.Production Technician & Equipment OperatorBurlingame, CAWhat You'll Do: Set up tooling, fixtures and instrumentation and run repeatable production tests on dedicated equipment typically found in spacecraft production: (vibration tables, thermal chambers, TVAC chambers, deployment fixtures, etc.). 2+ years of experience operating and running production equipment and machines; environmental chambers, mechanical deployment fixtures, complex lifting equipment, vibration/shock/thermal cycling testing, 3D printers, chamber testing, etc.
NewMobile Truck Technician / Mechanic - Swing Shift Pape Material Handling IncMobile Truck Technician / Mechanic - Swing ShiftSan Leandro, CA$43.75–$49.503 or more years of experience working on all makes and models of medium and heavy-duty class 7/8 trucks, including engine repair, electronic trouble-shooting, HVAC systems, and chassis repair. As our Mobile Truck Technician / Mechanic, you will work in the field at customer locations on medium and heavy-duty class 7 & 8 trucks, ensuring repairs are done accurately and timely.
HVAC/ MECHANICAL Technician Experienced Installer Sugar Bear Home Services,LLCHVAC/ MECHANICAL Technician Experienced InstallerSouth San Francisco, CAFull timeInstall mini splits, heat pumps, and package units. Work with an organized crew and clear scopes.
Facilities Maintenance Technician Amphenol Thermometrics IncFacilities Maintenance TechnicianFremont, CAAs a global leader in MEMS (Microelectromechanical Systems) technology, we design and manufacture advanced pressure sensors that power critical applications across the medical, industrial, and transportation markets-whether it is enabling life-saving medical devices, enhancing vehicle safety and efficiency, or ensuring reliability in industrial systems. The ideal candidate has hands-on experience supporting semiconductor or advanced manufacturing operations, including chemical management, wastewater systems (AWN), hazardous materials handling, and facility equipment such as HVAC, chillers, and compressors.
ENTRY LEVEL - Maintenance Technician Quality Talent GroupENTRY LEVEL - Maintenance TechnicianMountain View, ColoradoOur client is hiring a Mid - Senior Maintenance Technician (Swing Shift) responsible for maintaining mining and processing equipment in a ready and operational state. Basic mechanical skills including welding (stick/arc), light fabrication, cutting torch, and hand tools.
Facilities/Chemical Maintenance Technician - Front End Nights (FEN) FujifilmFacilities/Chemical Maintenance Technician - Front End Nights (FEN)Santa Clara, California$20–$30 / hourWe are a recognized leader in the manufacturing and design of durable and productive drop-on-demand inkjet printheads that power cutting-edge systems, as well as integrated inkjet solutions that add digital inkjet capabilities to other equipment. Assure maximum equipment up-time (7x24) of facilities systems; including HVAC systems supporting Class 1,000 clean rooms, DI water, compressed air, industrial gases, electrical distribution, process plumbing, etc.
Lead Facilities Technician 1XLead Facilities TechnicianSan Carlos, CaliforniaInfrastructure plays a critical role in accelerating execution by delivering world-class workplaces, infrastructure, and operational readiness that allow engineering, manufacturing, and operations teams to move faster and scale smarter. This team ensures our manufacturing sites, labs, warehouses, and workplaces are safe, reliable, and operationally excellent environments where engineering, production, and business teams can move with speed and focus.
Diesel Technician Apprentice (Military Veterans) Isuzu Veterans Apprenticeship Program (IVAP)Diesel Technician Apprentice (Military Veterans)San Francisco, CAPotential full-time employment with a participating Isuzu dealership • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance. • Transitioning Service Member or U.S. Military Veteran status • 3–5 years of military or civilian technician work experience • Honorable military discharge or Commander’s Statement of Service • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems • Ability to provide work references • Clean driving record, as attested by the applicant • Ability to complete the IVAP technical assessment • Ability to pass applicable dealership background, driving record, or drug screening requirements.
Engineering Technician, Product Design Stealth-mode Battery StartupEngineering Technician, Product DesignSan Jose, CaliforniaWe are seeking an Engineering Technician to support the lab manager and cross-functional engineering teams by building, testing, and maintaining equipment, systems, and prototypes. You’ll take on hands-on technical work spanning prototype assembly, experimental test execution, troubleshooting, calibration, documentation, and general lab support.
Analytical Test Technician FST Technical ServicesAnalytical Test TechnicianSunnyvale, CA$30–$35 / hourTechnicians will be required to follow proper Safety, Decontamination and Gowning procedures, including the use of PPE while working with one or more dangerous elements or conditions such as chemicals, gases, electric currents, high voltage, moving mechanical parts, etc. Operate conventional analytical testing equipment including: Moisture, Oxygen, Particulate, Total Organic Carbon (TOC), Resistivity contamination and Helium Leak detection.