Mechanical Inspector Nesco Resource, LLCMechanical InspectorMelville, NY$55,000–$72,800 / yearSupports continuous improvement initiatives by generating accurate, data-driven findings that inform multifunctional team consisting of engineering, manufacturing, quality, and supply chain. Responsible for the systematic inspection, evaluation, and analysis of production and customer-returned product to identify failure modes and determine root causes.
Level 2 Electro-Mechanical Inspector Mini-CircuitsLevel 2 Electro-Mechanical InspectorBrooklyn, New York$23–$25 / hourOur products are also used in detection, measurement, and imaging applications, including military communication, guidance, and electronic countermeasure systems, commercial, scientific, military land, sea, and aircraft; automotive systems, medical systems, and industrial test equipment. Perform mechanical and electrical inspection of various items using a vision measuring system and hand tools such as calipers, micrometers, force gauges, etc., and electrical equipment such as an LCR meter and multimeter.
Mechanical Construction Inspector Brookhaven National LaboratoryMechanical Construction InspectorNY$92,050–$156,150 / yearBrookhaven National Laboratory requires all non-badged personnel including visitors to produce a REAL-ID or REAL-ID compliant documentation to access Brookhaven National Laboratory - view more information at www.bnl.gov/real-id. The Modernization Project Office (MPO) is responsible for the engineering, design, cost estimating, scheduling, and project controls on conventional construction projects, including the selection of architectural/engineering firms, contractors and others engaged for these projects.
Aerospace Mechanical Inspector CbAerospace Mechanical InspectorMedford, New YorkWe are a top‑performing supplier supporting major military aircraft platforms, ground‑support systems, Boeing, Airbus, and emerging SpaceX‑related programs. The Role You will perform in-process and final dimensional inspections of tight-tolerance machined parts and assemblies according to exact technical specifications.
Mechanical Inspector Safe Flight InstrumentMechanical InspectorWhite Plains, NY$20–$30 / hourWith product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft.
Mechanical Integrity Inspector Encorus GroupMechanical Integrity InspectorWest Seneca, NYFull timeIn this role, you will spend most of your time working directly at client facilities and project sites—often in industrial environments—wearing required personal protective equipment (PPE), working around mechanical systems, and getting hands-on in real-world conditions. Responsibilities: Perform field inspection and testing services for fixed equipment which may include, but not limited to API-510 Pressure Vessels, API-570 Process Piping and API-653 / STI SP001 Storage Tanks.
Senior Mechanical Integrity Inspector / API Inspector Encorus GroupSenior Mechanical Integrity Inspector / API InspectorWest Seneca, NYFull timeResponsibilities: Perform field inspection and testing services for fixed equipment which may include, but not limited to API-510 Pressure Vessels, API-570 Process Piping and API-653 / STI SP001 Storage Tanks. At least one of the following certifications is required (more are preferred): API 510, API 570, and/or API 653; Level II qualification in MT, PT, UT, UTT, or ET, AWS Certified Welding Inspector (CWI) certification.
Mechanical QC Inspector Synerfac Technical StaffingMechanical QC InspectorFarmingdale, NY$22–$25 / hourDisclaimer: By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Join a respected manufacturing leader committed to delivering precision-engineered products and continuous quality improvement.
Construction Mid-Level Mechanical Systems Inspector - Watervliet, NY AECOMConstruction Mid-Level Mechanical Systems Inspector - Watervliet, NYNYWe invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. At times the position requires working with arms above shoulder level, power gripping/squeezing (hand tools, levers, etc.), climbing stairs, using portable ladders, wearing fall protection, working in confined spaces, and lifting greater than 25 pounds.
Construction Mechanical-Electrical Inspector The LiRo GroupConstruction Mechanical-Electrical InspectorAlbany, New YorkRecently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. Responsibilities: Our Resident Engineering Inspection division has a need for on-site M-E Construction Inspector for a major NYSDOT Railroad Lift Span Bridge for specialized inspection of Mechanical - Electrical Systems and components.
Mechanical Receiving Inspector - 2nd Shift Moog IncMechanical Receiving Inspector - 2nd ShiftBuffalo, NY$26.44–$36.06 / hourObserve the activities of certified operators and machinists and sample inspect or verify their output to ensure that piece parts or assemblies are to specifications, that work instructions and engineering procedures are being adhered to and that gauging requirements and techniques are appropriate for the operation. As a Mechanical Receiving Inspector, you will: Perform a wide variety of Quality Control tasks including the prove-out support for cell manufacture and auditing of machine shop, sub-assembly and special process areas.
Inspector C L3Harris Technologies IncInspector CNorth Amityville, NY$52,000–$97,000 / yearDesire to learn how to perform heavy mechanical inspection which encompasses the use of coordinate measurement equipment (CMM, Faro arm, etc.), performing tooling/gauging verification, and using other complex measurement techniques and methods. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Quality Inspector III- Final Inspection - 1st Shift Eaton Corporation PlcQuality Inspector III- Final Inspection - 1st ShiftOrchard Park, NY$27–$31 / hourAfter making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Quality Inspector II - 1st Shift Eaton Corporation PlcQuality Inspector II - 1st ShiftOrchard Park, NY$24.50–$27.50 / hourAfter making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Special Inspector/Construction Inspector A & T Engineering P.C.Special Inspector/Construction InspectorFlushing, New York$40,000–$85,000Prepare reports on inspection activities, file documentation and complete required technical report forms in accordance with New York City Building Codes. We are currently seeking inspectors to join our team to perform special inspection on New York City building construction projects.
Inspector 3/4 Northrop Grumman CorpInspector 3/4Ronkonkoma, NY$56,000–$93,400 / yearUse various measuring devices such as calipers, micrometers, thickness gages, height gages, shore A & D hardness gages, and electronic measuring devices (Coordinate Measuring Machines). The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Building Inspector SAFEbuiltBuilding InspectorPort Washington, WashingtonEDUCATION & EXPERIENCE: State of WI Commercial Building Inspector or UDC Construction Inspector license (or ability to obtain prior to start date) required *Commercial Building Inspector license can be acquired by exam or by providing proof of one of the below* ICC Building Inspector certification (residential and commercial). Our employees are our greatest asset, with exceptionally certified individuals in all departments, including Planning & Zoning, Code Enforcement, Fire Prevention, and Engineering, as well as full-service and supplemental Building Department services.
Quality Inspector AMETEK IncQuality InspectorGarden City, NYHT provides Engine Surface Coolers, Fuel-Cooled Oil Coolers, Air-Cooled Oil Coolers, high temperature Buffer/Pre-Coolers, and bundled Heat Exchanger/Fan/Blower/Duct systems for the most challenging applications/requirements. AMETEK Hughes-Treitler (HT) is the industry leader in high-performance, plate-fin, Aluminum/Inconel heat exchangers for Military and Commercial Engine, Rotary, Airframe, and similar applications.
Quality Assurance Inspector EPS CorporationQuality Assurance InspectorFlorida, FLKey Responsibilities:Perform in-process and final inspections on fabricated metal and composite parts, assemblies, and subassemblies per technical drawings, specifications, and work instructions. The QA Inspector will play a critical role in ensuring all products meet contractual, regulatory, and customer quality requirements in support of Department of Defense (DoD) programs.
Inspector 2 (CMM) 3rd Shift GE Aerospace.Inspector 2 (CMM) 3rd ShiftNYAbility and willingness to use basic hand tools (dremel/cut off tooling) and measuring devices (i.e. - dial calipers, rulers, tape measures, protractors, micrometers, gauges, etc.) as required within department. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)).
Quality Inspector (Edwards Vacuum) Atlas Copco ABQuality Inspector (Edwards Vacuum)Buffalo, NY$52,040–$65,050 / yearHand and Finger Use/Dexterity: Uses hands to handle, control, or feel objects, tools, or controls occasionally to moderately (30-40% of the time), with manual dexterity and arm-hand steadiness for tasks like sketching, operating computers, or handling small tools; near vision required for detailed drawings or screens. • Strong attention to detail, organization, and decision-making skills to ensure accurate inspection results and product acceptance • Strong written and verbal communication skills, with the ability to clearly convey technical quality information to cross‑functional teams (Production, Manufacturing Engineering, Maintenance, Supply Chain, Safety, etc.).
Quality Inspector Mechanical Rubber Products Company Inc.Quality InspectorWarwick, NYJob Summary: We are seeking a detail-oriented and experienced Quality Inspector to join our team at our custom rubber manufacturing facility in Warwick, NY. This role requires a solid understanding of mechanical drawings, measurement tools, and quality control processes.
Senior Building Inspector City of KingstonSenior Building InspectorKingston, New York$70,790FULL PERFORMANCE KNOWLEDGE, SKILLS, ABILITIES AND PERSONAL CHARACTERISTICS: Good knowledge of NYS Uniform Building and Fire Codes; good knowledge of local municipal codes and ordinances; good knowledge of building construction techniques, and materials; good knowledge of computers, spreadsheets, and property inspection software; ability to communicate effectively with staff, public officials, construction trade personnel and the public; ability to read, interpret and review construction plans; ability to write clear and concise reports and to communicate effectively both orally and in writing; ability to maintain accurate detailed records and project files. Graduation from a regionally accredited or NYS registered college or university with an associate degree in civil engineering, Architecture, Construction Technology, or closely related field and one (1) year of experience as a building contractor, or trades worker, or in the design of building or the inspection of buildings for safety and compliance codes; or .
Rotating Equipment Inspector Intertek Group PlcRotating Equipment InspectorNY$40–$50 / hourPreferred Requirements & Qualifications: • Valid Industry Certification preferred - Examples of such certifications include, but not limited to: AWS CWI, API 510, 570, SI, (Source Inspector), Electrical Journeyman License, NACE CIP 1, 2, 3, EMA (Expediting Management Association) Basic, Advanced, ASNT NDT Level II, III, and ASQ or IRCA Certified Auditor. Intertek supports our clients striving to meet the growing global infrastructure requirements and demands for secure and sustainable sources of energy through services such as inspection, expediting, technical auditing, and site construction support.
In-Process Optical Inspector L3Harris Technologies IncIn-Process Optical InspectorRochester, NY$49,500–$91,500 / yearWith customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
NewMEP-Field Engineer/Inspector Paco GroupMEP-Field Engineer/InspectorNew York, NY$65–$85 / hourThe selected candidate will assist the Chief Inspector/Resident Engineer in overseeing installation, repair, and modernization of mechanical, electrical, and plumbing (MEP) systems across several municipal facilities, including community centers, fire stations, and civic buildings. Monitor construction related to life safety systems such as fire alarms, emergency power, and fuel gas systems.• Coordinate with the Chief Inspector and project team regarding inspection findings andconstruction sequencing.•
Quality Control Inspector Carter Lard ConsultingQuality Control InspectorBrooklyn, NY$23–$33Uses scales, tape, calipers, micrometer, combination-square and other measuring equipment to inspect parts, equipment, and their proper installation to rail car body. Records data and findings from inspections in inspection reports and related documentation with a high degree of.
Quality Inspector Brooklyn Top Prospect Group LLCQuality Inspector BrooklynBrooklyn, NY$26–$33 / hourUse measuring instruments such as scales, tape measures, calipers, micrometers, and combination squares to inspect parts and equipment for proper installation on rail car bodies. Company Overview: Founded in 2010, Top Prospect Group was created with a focus on matching high-quality candidates with top clients while fostering an environment where success is shared by all.
Inspector 3 (Sensors)-2nd Shift GE Aerospace.Inspector 3 (Sensors)-2nd ShiftNYdevices (i.e. - dial calipers, rulers, tape measures, protractors, micrometers, gauges, optical comparators, ohm meters, leak check, CMM, dial calipers, rulers, tape measures, protractors, micrometers, etc.). Ability and willingness to use hand tools and measuring devices (i.e. - optical comparators, ohm meters, leak check, CMM's, dial calipers, rulers, tape measures, protractors, micrometers, gauges, etc.) as required within department.
NewBoiler Inspector, Albany (NY HELPS) New York State Thruway AuthorityBoiler Inspector, Albany (NY HELPS)Albany, NY$53,764–$68,630 / yearSubstitution: An associate degree in engineering technology, marine engineering, mechanical engineering, or mechanical technology and either two years of commercial, residential, or military experience in boiler making, boiler installation or inspection or in the operation and maintenance of high and/or low pressure boilers including all firing apparatus and control devices. If you are a person with a disability and wish to request that a reasonable accommodation be provided for you to participate in a job interview, please contact: Department of Labor, Attn: Director, Office of Diversity, Equity, Inclusion, and Access (ODEIA), Building 12, Albany, NY 12226 (Phone (518) 457-1984 and/or fax (518) 485-2575.).
NewInspector Arcadis NVInspectorNew York, NY$50–$65 / hourAs a construction Inspector, you will utilize your experience and technical knowledge of construction management, municipal infrastructure, building construction, MEP systems construction (including boilers, HVAC, piping, electrical, plumbing, etc.), asbestos abatement projects, site development, general civil/structural construction work, construction field inspection, construction site safety, QA/QC, and report documentation to successfully assist the Arcadis Assistant Project Manager/ Resident Engineer with the oversight and management of Arcadis' on-site team for its delivery of construction management services for the construction of a new boiler building at a NYCHA development located in Brooklyn, NY and to assure Contractors' compliance with project requirements, and positively represent ARCADIS. Role accountabilities: The inspector will provide inspection for overall quality of work, construction site safety, testing procedures, inspection protocols, construction techniques and timely completion of daily inspection activities and will be responsible for inspection of materials used on projects to ensure compliance with approved plans, specifications, submittals, and ordinances, on behalf of Clients and Owners.
Resident Inspector - UT Level II - Upstate NY (56184) Applied Technical Services IncResident Inspector - UT Level II - Upstate NY (56184)NYValidation of thickness data coverage of existing assets, creation of additional inspection points as appropriate and as agreed with separate API 570 lead, and then coordination/execution of inspection of those points including potential working from mobile platforms and ladders. They will run the daily UT program through collation of UT schedule requirements, coordination of UT testing with other technician(s) including self-perform of thickness testing as needed to support a thorough and timely testing strategy, and review of all UT data to ensure accuracy of the program database.
Inspector Apprentice (Manheim) Cox Enterprises IncInspector Apprentice (Manheim)Newburgh, NY$15.10–$22.60 / hourA basic understanding and delivery of the following is required: VIN recognition; proper notation of all options and equipment in vehicle; proper odometer reading and operable function; identification of damage, missing parts, and major mechanical problems; estimating repair cost pricing; recommending labor actions, severity, pricing; identifying value added options; identifying basic mechanical conditions; identifying common wear and tear; evaluating fluid levels; documenting. Verify vehicle information based on work order information - identify damage, missing parts, and mechanical problems by inspecting all customer vehicles at time of receipt (i.e., interior, exterior, odometer reading, trunk area, engine compartment), noting any damage or repair to frame/paint, engine noise, AC/heater operation, radio, tire condition, etc.
Quality Control Inspector eCom Solutions IncQuality Control InspectorEdgewood, NY$24–$30 / hourThe Quality Control (QC) Inspector performs in-process, final inspection and test of completed components and subassemblies and to fabricate test fixtures and prototypes as necessary. " Complete check lists, tags and data sheets as necessary to accurately maintain records of tests performed.
Resident Inspector API-570 - Syracuse, NY (56185) Applied Technical Services IncResident Inspector API-570 - Syracuse, NY (56185)Syracuse, NYSummary: ATS Mechanical Integrity Group needs a Resident Inspector API-570 (additional API/NDT certs a plus) for direct on-site support at customer facility in New York State. Person" includes (a) U.S. citizens or nationals; (b) U.S. lawful permanent residents (i.e., "green card" holders); (c) persons granted refugee status; or (d) persons granted asylum in the United States.
Inspector 3 (Space) GE Aerospace.Inspector 3 (Space)NYdevices (i.e. - dial calipers, rulers, tape measures, protractors, micrometers, gauges, optical comparators, ohm meters, leak check, CMM, dial calipers, rulers, tape measures, protractors, micrometers, etc.). Ability and willingness to use hand tools and measuring devices (i.e. - optical comparators, ohm meters, leak check, CMM's, dial calipers, rulers, tape measures, protractors, micrometers, gauges, etc.) as required within department.
Inspector 3 (Sensors) 3rd Shift GE Aerospace.Inspector 3 (Sensors) 3rd ShiftNYdevices (i.e. - dial calipers, rulers, tape measures, protractors, micrometers, gauges, optical comparators, ohm meters, leak check, CMM, dial calipers, rulers, tape measures, protractors, micrometers, etc.). Ability and willingness to use hand tools and measuring devices (i.e. - optical comparators, ohm meters, leak check, CMM's, dial calipers, rulers, tape measures, protractors, micrometers, gauges, etc.) as required within department.
Inspector 3 (Space) 2nd Shift GE Aerospace.Inspector 3 (Space) 2nd ShiftNYdevices (i.e. - dial calipers, rulers, tape measures, protractors, micrometers, gauges, optical comparators, ohm meters, leak check, CMM, dial calipers, rulers, tape measures, protractors, micrometers, etc.). Ability and willingness to use hand tools and measuring devices (i.e. - optical comparators, ohm meters, leak check, CMM's, dial calipers, rulers, tape measures, protractors, micrometers, gauges, etc.) as required within department.
Code Inspector Otsego CountyCode InspectorCooperstown, New York$46,718–$55,233FULL PERFORMANCE KNOWLEDGE, SKILLS, AND ABILITIES : Thorough knowledge of the New York State Uniform Fire Prevention and Building Code, local zoning ordinance, housing codes, New York State Multiple Residence Law and other laws, codes and ordinances; thorough knowledge of modern practices, principles, materials and tools used in building construction; good knowledge of the principles and methods of field inspection; working knowledge of the geography of the County; working knowledge of the legal procedures used in enforcement of the codes; ability to read and interpret blueprints, surveys, maps, plans and specifications; ability to enforce codes, ordinances and regulations with firmness and tact; ability to understand and interpret complex oral instructions and/or written directions; ability to organize and maintain accurate records and files; ability to analyze and organize data and prepare records and reports; ability to communicate effectively both orally and in writing; ability to deal effectively with the public. MINIMUM QUALIFICATIONS: Either: (a) Graduation from a regionally accredited college or university or one accredited by the Board of Regents to grant degrees with an Associate’s degree or higher in mechanical or construction technology or a closely related field and one (1) year of full-time experience or its part-time equivalent as a building contractor, journey level trades worker; in design of buildings; in the inspection of buildings for safety and/or compliance with codes or laws; in review of plans; or in implementation of codes, laws or ordinances; OR.
Quality Inspector (PCB / Electronics) 1st shift Nesco Resource, LLCQuality Inspector (PCB / Electronics) 1st shiftWestbury, NY$20 / hourEvaluate solder joints, component placement, polarity, labeling, and workmanship in accordance with IPC-A-610 Class 2/3 criteria. - Perform final inspection of finished product to ensure product is compliant to sales orders and customer requirement.
Quality Inspector Nesco Resource, LLCQuality InspectorBallston Spa, NY$22–$25 / hourThis position is responsible for performing inspections, testing, and quality control activities for electrical component products used in a highly regulated manufacturing environment. This role requires strong attention to detail, the ability to interpret mechanical and electrical drawings, and the ability to make quality decisions within established guidelines.
Receiving Quality Inspector III BAE SystemsReceiving Quality Inspector IIIGreenlawn, NY$62,530–$100,048 / yearThe Receiving Inspector will report to the Quality Manager and perform the following tasks: + Uses predetermined methods, operations, setups and prescribed specifications to visually inspect in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. + May interface with engineering regarding technical issues and problem resolution + Performs other duties and responsibilities as required **Pay Information** Full-Time Salary Range: $62530 - $100048 Please note: This range is based on our market pay structures.
MEP Inspector - Healthcare Sre Engineering DpcMEP Inspector - HealthcareNew York, New YorkAbout the role SRE Engineering, D.P.C. is seeking MEP Inspectors to conduct field inspections of mechanical, electrical, and plumbing installations on NYC Health + Hospitals capital construction projects across all five boroughs. Maintain detailed daily inspection reports documenting MEP contractor workforce, work completed, and field conditions.
Certified Weld Inspector- 1st shift GTI FabricationCertified Weld Inspector- 1st shiftBuffalo, New YorkWe fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. This role plays a critical part in verifying weld quality through visual and non-destructive inspections while supporting GTI’s commitment to precision, safety, and compliance across all welded assemblies.
Vehicle Condition Inspector ACV Auctions IncVehicle Condition InspectorRochester, NYGenerous paid time off options, including uncapped vacation days, the greater of 3 paid sick days or in accordance with the applicable state or local paid sick leave law, 6 paid company holidays, 2 floating holidays, parental leave, bereavement leave, jury duty leave, voting leave, and other forms of paid leave as required by applicable law or regulation. Partnering with a Territory Manager and a team of Inspectors, conducts inspections of vehicles at dealerships, auctions, and off-lease, to detect damage, missing parts and mechanical problems.
Construction Inspector LaBella AssociatesConstruction InspectorBatavia, NYOur benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Minimum of 3- 5 years of Construction Inspection experience, or a 4-year degree in Construction Management, Engineering, or Architecture and minimum 2-3years of Construction Inspection experience in the building trades.
Quality Inspector The Council of IndustryQuality InspectorWarwick, New York$22–$25 / hourFull timeCompany Profile: Mechanical Rubber is a leading custom rubber manufacturer located in Warwick, NY, specializing in providing high-quality rubber products for a wide range of industries. The ideal candidate has experience reading mechanical drawings, using precision measurement tools, and working within quality control processes in a manufacturing environment.
Receiving Quality Inspector III BAE Systems PlcReceiving Quality Inspector IIINY$62,530–$100,048 / yearThe Receiving Inspector will report to the Quality Manager and perform the following tasks: Uses predetermined methods, operations, setups and prescribed specifications to visually inspect in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services.
Senior Building Code Inspector Willdan Group IncSenior Building Code InspectorNYOur experience includes a range of technical expertise to service your facilities, such as permit issuance, building plan review, building inspection, grading and accessibility plan review and inspection, flood zone experience, fire-life safety plan review, building official services, code enforcement, emergency safety assessment, and disaster recovery. Willdan has provided Building and Safety services for 60 years, working with municipalities, university systems, healthcare facilities, and tribal entities.
Senior Inspector Summit Fire & Security LLCSenior InspectorKingston, NYDemonstrating the combination of experience, knowledge, and customer service is the key to our performance and helps us achieve our goal of providing the highest quality fire protection services possible to protect lives and property. • Employee will frequently be required to work inside and outside in hot/cold temperatures and be exposed to loud noises, cramped quarters, dust, fumes, and odors, standing on hard surfaces, and electrical hazards frequently.