NewMechanical Engineer State University Construction FundMechanical EngineerAlbany, NY$101,771–$134,210 / yearFull timeThe State University Construction Fund (Fund) is a New York State government entity dedicated solely to facilitating and expediting the construction, renovation, rehabilitation, and improvement of the State University of New York's academic building and infrastructure assets at 32 state-operated campuses and 3 teaching hospitals. The Fund offices and the adjoining employee parking garage are just steps from the Hudson River, a short walk to the Capitol Building and the Empire Plaza, and a few minutes' drive to major highways including the Northway (Interstate 87) and the New York Thruway (Interstate 90).
Principal Mechanical Engineer Naval Nuclear LaboratoryPrincipal Mechanical EngineerWest Milton, NY$106,200–$166,000 / yearBachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 7 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering, science field and a minimum of 3 years of relevant experience; or Currently a Principal Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston.
Mechanical Engineer Naval Nuclear LaboratoryMechanical EngineerNiskayuna, NY$86,100–$134,600 / yearBachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 4 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 2 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering, science field; or Currently an Advanced Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston.
Mechanical Engineer (Reactor Servicing), Senior Naval Nuclear LaboratoryMechanical Engineer (Reactor Servicing), SeniorSchenectady, NY$95,700–$149,600 / yearNaval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets.
Senior Mechanical Engineer Naval Nuclear LaboratorySenior Mechanical EngineerNiskayuna, NY$95,700–$149,600 / yearNaval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets.
NewExperienced Facilities Engineer Naval Nuclear LaboratoryExperienced Facilities EngineerNiskayuna, NY$106,200–$166,000 / yearBachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 7 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering, science field and a minimum of 3 years of relevant experience; or Currently a Principal Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston.
NewProcess Development Engineer (Photonics) NY CreatesProcess Development Engineer (Photonics)Rochester, NY$100,000–$135,000 / yearFull timeAIM Photonics is one of nine United States Department of Defense Manufacturing Innovation Institutes which are industry-driven, public-private partnerships that focus on the nation's premiere capabilities and expertise to capture critical global manufacturing leadership. For positions requiring such access, offers of employment are contingent upon the employer being able to obtain the necessary authorization, including, if required, an export license from the U.S. Department of Commerce's Bureau of Industry and Security, the U.S. Department of State's Directorate of Defense Trade Controls, or other government agencies.
NewExperienced Civil Engineer Naval Nuclear LaboratoryExperienced Civil EngineerNiskayuna, NY$106,200–$166,000 / yearBachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 7 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering, science field and a minimum of 3 years of relevant experience; or Currently a Principal Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Typical work includes civil and structural evaluations for road building, underground utilities, and roof repairs; ownership and maintenance of sewage and stormwater drain systems; support to recapitalization projects from concept design through construction closeout (including calculations, specifications, cost estimates, and contract documents); utility identification for excavations; construction and condition inspections; and maintenance/operations support for emergent issues.
Exprienced Electrical Engineer Naval Nuclear LaboratoryExprienced Electrical EngineerNiskayuna, NY$95,700–$149,600 / yearBachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 4 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering or science field and a minimum of 1 year of relevant experience; or Currently a Senior Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston.
Control System Engineer Naval Nuclear LaboratoryControl System EngineerNiskayuna, NY$94,800–$148,200 / yearNaval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. The Integrated Power System's unit within Submarine Programs is seeking a highly skilled control system engineer with expertise in designing, implementing, and optimizing control systems for complex dynamic systems that integrate coupled mechanical-electric-fluid dynamic disciplines.
Engineer, Electrical Design Constellation EnergyEngineer, Electrical DesignFulton, NY$87,000–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
Engineer, Programs Fire Protection Constellation EnergyEngineer, Programs Fire ProtectionMexico, NY$87,000–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
Engineer, Electrical Constellation EnergyEngineer, ElectricalMexico, NY$92,700–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
NewManufacturing Engineer GCR Professional ServicesManufacturing EngineerKingston, New York$40–$45 / hourContractorThe Manufacturing Engineer is responsible for developing and implementing new manufacturing processes and capabilities, both internally and through external partners, to improve efficiency, reduce product costs, and support assembly operations. This role works closely with operations, engineering, customers, and suppliers to drive continuous improvement in safety, quality, delivery, productivity, and cost performance.
Engineer, Manager Constellation EnergyEngineer, ManagerPulaski, NY$162,000–$180,000Bachelor's degree in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical, or nuclear) OR related science OR License Professional Engineer OR Active/Inactive SRO License with 5 years of engineering or related experience, which shall include 1 year of nuclear power plant experience. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
NewSales Engineer SMV RecruitingSales EngineerSyracuse, NYSMV Recruiting is partnering with a smaller yet thriving engineering firm that acts as a manufacturer's representative supporting the defense and aerospace engineering field in Upstate, NY. Our client has been growing year-over-year and they are looking for a hybrid Sales Engineer with experience as an ME or EE with design experience, to support their current clients.
Engineer Mikasa Hospitality GroupEngineerNew York, NYRequired Skills/Abilities: Know how to operate hand and power tools (drills, saws, drain cleaners, pressure washing equipment and a wide variety of meters and testers). Adhere to security procedures concerning the handling of guest room and master keys, security of boiler and electrical rooms and other engineering areas, proper storage of all chemicals, etc.
NewField Service Engineer - New York City Executive Directions & Pinnacle Int'lField Service Engineer - New York CityNew York, NY$35–$50 / hourDue to growth and expansion in North America, the company is seeking two Field Service Engineers based in the Midwest (Chicago/Milwaukee), Northeast (Philadelphia/NYC/New Jersey), or Southeast (Atlanta) areas. The Responsibilities : Install, repair, and rebuild high speed, servo-driven, mechanical motion-controlled systems that slice, cut, fold, slip, stack, wrap, and convey products.
Mechanical Design Engineer - Utilities Brookhaven National LaboratoryMechanical Design Engineer - UtilitiesNY$113,050–$190,883 / yearThe Energy & Utilities (EU) Division operates and maintains BNLs: • Electric Transmission & Distribution System • Central Steam Facility • Central Chilled Water Facility • Potable Water Treatment Facility • Wastewater Treatment Facility • Site Fire Alarm Detection Systems • Building Electrical Systems • Site Energy Management Control System (EMCS) • Energy Procurement • Energy Metering Systems. The ideal candidate will be familiar with the AE design process and the maintenance and operations of large-scale facilities and centralized and distributed utility systems, including but not limited to knowledge of central chilled water plants, central steam plants, and high-pressure steam/condensate distribution and return systems.
Senior Mechanical Engineer Kimmel & AssociatesSenior Mechanical EngineerNew York, NY$140,000–$150,000Through innovative HVAC engineering, electrical upgrades, building automation systems, preventative maintenance, and energy optimization, the company helps commercial and institutional clients reduce operating costs while improving building performance and environmental impact. This is an excellent opportunity for a technically strong engineer who enjoys solving challenging engineering problems, mentoring junior staff, and collaborating with multidisciplinary teams throughout the entire project lifecycle—from conceptual design through construction.
Mechanical Engineer Huntington Ingalls Industries IncMechanical EngineerSyracuse, NY$76,956–$115,000 / yearWhen extending an offer, HIIs Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the roles function and a candidates education or training, work experience, and key skills. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals.
NewLead Mechanical Engineer (Mission Critical/Data Centers) WSPLead Mechanical Engineer (Mission Critical/Data Centers)New York, NY$165,000–$182,000 / yearImpact**+ Produce high quality technical and professional deliverables for projects and proposals+ Design complex and large air distribution (supply, return, exhaust) and hydronic systems (chilled water, heating water, etc.)+ Design Automatic building automation controls systems and specification for large air distribution and heat rejection systems+ Work within multi-discipline project teams to develop drawing and specification documents for issuance to architects, contractors and building owners+ Attend client meetings and lead discussions+ Communicate complex mechanical engineering concepts and decisions to clients and stakeholders+ Directing complex mechanical engineering requirements and integrate into facility designs+ Collaborate and coordinate with internal project discipline team members and external equipment vendors and manufacturers+ Act as the lead mechanical engineer on projects and direct the project team+ Lead and mentor a team of engineers+ Perform project management activities including writing proposals, establishing budgets, and managing client interactions+ Coordinate activities concerned with technical development, scheduling, and resolving engineering design issues+ Survey and evaluate existing conditions+ Perform construction administration**Who You Are**The ideal candidate is a technically sound mechanical engineer with the ability to lead and develop complex projects and foster the growth of junior engineers. WSP USA reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant's sex or other status protected by local, state, and/or federal law.**About WSP**WSP USA is the U.S. operating company of WSP, one of the world's leading engineering and professional services firms.
Mechanical Engineer Synerfac Technical StaffingMechanical EngineerNew York, NYRemote$100,000–$150,000 / yearDemonstrated experience with data center cooling technologies including IT equipment, emergency generators, air-cooled/water-cooled chillers, cooling distribution units, cooling towers, adiabatic coolers, CRAH/CRAC units, liquid cooling systems, and containment solutions. The ideal candidate will have 4+ years of experience performing CFD analysis using Cadence software, with a strong background in data center cooling systems, airflow analysis, and thermal optimization.
Newfrog, Mechanical Engineer Capgemini SEfrog, Mechanical EngineerNew York, NY$112,600–$212,700 / yearIt delivers end-to-end services and solutions leveraging strengths from strategy and design to engineering, all fueled by its market leading capabilities in AI, generative AI, cloud and data, combined with its deep industry expertise and partner ecosystem. Important Notice: Compensation (including bonuses, commissions, or other forms of incentive pay) is not considered earned, vested, or payable until it becomes due under the terms of applicable plans or agreements and is subject to Capgemini's discretion, consistent with applicable laws.
NewMechanical Engineer Chase Brass and Copper Co LLCMechanical EngineerBuffalo, NY$85,000–$105,000 / yearMechanical Engineer Qualifications: Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, 9001, IATF 16949 programs and procedures though active participation in the near miss program. The Mechanical Engineer will be responsible for Responsible for mechanical engineering effort as necessary to support plant operations, process improvements, capital projects, design file maintenance, and personnel development.
Senior Mechanical Engineer - Kiewit Power Engineering Kiewit CorpSenior Mechanical Engineer - Kiewit Power EngineeringNY$152,000–$159,000 / yearPrepare mechanical engineering designs, drawings, As-Builts, systems specifications, equipment lists, general arrangements, aux power demands, and process flow diagrams (PFDs) and procurement packages for equipment/components, technical bid evaluation from vendors, and vendor selection. Our staff leads the power markets engineering process and collaborates with Kiewit's construction teams to approach construction-driven engineering with a focus on safe, cost-effective, and innovative designs that achieve client expectations and further Kiewit's legacy of excellence.
Mechanical Operations Engineer - Utilities Brookhaven National LaboratoryMechanical Operations Engineer - UtilitiesUpton, New YorkThe ideal candidate will be familiar with the AE design process and the maintenance and operations of large-scale facilities and centralized and distributed utility systems, including but not limited to knowledge of central chilled water plants, central steam plants, and high-pressure steam/condensate distribution and return systems. The Facilities & Operations (F&O) Directorate’s mission is to support the science and technology and environmental restoration missions of the Laboratory by providing a safe, environmentally sound, and reliable infrastructure, to provide high quality crafts and fabrication services to our customers as needed and to protect people, property, and national security.
Mechanical Engineer - Data Center Facilities Ramboll UK LtdMechanical Engineer - Data Center FacilitiesValhalla, NY$95,000–$120,000 / yearAt Ramboll, you will find a dedicated group of professionals that are pioneers and leaders in Data Center Strategy, Planning, Design, Integration, Commissioning and Testing with Experience working in thousands of data centers in the U.S. territory and across the globe. Our team of consultants assist clients in understanding how to bring data closer to their own customers, bringing all components of IT and the facility together, and enable rapid deployment of a solution that achieves critical objectives.
Associate Principal Mechanical Engineer Buro HappoldAssociate Principal Mechanical EngineerNew York$150,000–$185,000 / yearBe a part of supporting our diverse company culture through open engagement with our Young Employees Forum, Diversity and Inclusion Forum, Buro Happold Women's Network, and/or our Black at Buro Happold Employee Resource Groups. As a key part of the team, your responsibilities will be varied, but likely to include: Provide leadership for project teams driving successful outcomes and ensuring project objectives are delivered.
Senior Mechanical Engineer, Rail + Transit (Design) SidaraSenior Mechanical Engineer, Rail + Transit (Design)New YorkTYLin’s Rail + Transit team is growing, and we are seeking a Senior Mechanical Engineer to support the design of high-performance mechanical systems for some of the most complex transit infrastructure projects in the country. This role is ideal for an experienced mechanical engineer who takes pride in technical excellence, enjoys solving challenging design problems, and is motivated by the opportunity to shape modern transit environments.
Senior Mechanical Engineer McFarland JohnsonSenior Mechanical EngineerSyracuse, NYPosition Requirements Full-Time/Part-Time Full-Time Shift Days City State New York Keywords HVAC, Plumbing and Fire Protection Pay Range DOE Position Mechanical Engineer Exempt/Non-Exempt Non-Exempt Open Date 5/8/2026. We're a 100% employee-owned firm with 80 years of experience delivering innovative engineering, planning, environmental, technology, and construction solutions that make a lasting impact on the clients and communities we serve.
NewSenior Mechanical Engineer, Energy Systems & HVAC Design RambollSenior Mechanical Engineer, Energy Systems & HVAC DesignSyracuse, NY$110,000–$140,000 / yearThe role involves designing HVAC systems, coordinating with engineering disciplines, and creating detailed design drawings using Revit. The ideal candidate will have over 10 years of experience in engineering and HVAC design, a Bachelor's degree in Mechanical Engineering, and a Professional Engineer license.
Lead Mechanical Engineer (Mission Critical/Data Centers) WSP Global IncLead Mechanical Engineer (Mission Critical/Data Centers)NY$165,000–$182,000 / yearOur mechanical, electrical, plumbing, fire protection, controls, telecommunications, and security building system designs keep many of the world's top Fortune 100 financial, technology, enterprise, hyperscale, and colocation companies up and running 24 hours a day, 365 days a year. As a Lead Mechanical Engineer with us, you will design complex cooling and HVAC systems, including air distribution systems, chiller plants, and alternative energy solutions while leading projects and a team of mechanical engineers.
Mechanical Engineer Twin Rivers Paper CompanyMechanical EngineerLittle Falls, New YorkThis role will provide hands-on engineering support while leading cross-functional teams, managing contractors, tracking Capital Expenditure (CapEx) and major maintenance budgets, and ensuring safe, reliable, and efficient operation of paper mill equipment and systems. With a sound financial structure and a strong balance sheet that fuels continuous investments in its assets, Twin Rivers Paper offers its customers the security of local product availability through a strong, domestically-owned manufacturer and the assurance of long-term viability.
Assistant Mechanical Engineer McFarland JohnsonAssistant Mechanical EngineerBinghamton, NYEagerness to Learn: A proactive attitude, a passion for occasional field visits, site inspections, and working full-time from our office (onsite position), including staying updated with industry trends and technologies, is highly valued for this candidate. This role requires the ability to work independently on complex tasks, ensure code compliance, and coordinate seamlessly with multidisciplinary teams using Building Information Modeling (BIM) workflows.
Mechanical Engineer ClarapathMechanical EngineerHawthorne, NY$90,000–$130,000 / yearWe are seeking a hands-on engineer who enjoys solving complex technical challenges, thrives in a collaborative and fast-paced environment, and is passionate about developing innovative medical device and automation technologies that improve laboratory workflows and patient outcomes. Working closely with electrical, software, manufacturing, quality, and customer-facing teams, the Mechanical Engineer will help develop robust, manufacturable solutions that meet performance, reliability, and regulatory requirements.
NewPart-Time Mechanical Engineer - Principal Level - Remote Enercon Services IncPart-Time Mechanical Engineer - Principal Level - RemoteNYRemote$61.48–$85.82 / hourOur Principal Engineers have the opportunity of being part of a multi-discipline engineering team for major projects such as cooling water systems (pumps, motors, control systems, piping, heat exchangers) for existing or new power plants. Get Hands-On in the Field: Travel to plant sites to connect with client personnel, conduct on-site walkdowns, and evaluate plant structures, systems, and components firsthand to inform project work #LI-KM1.
NewMechanical Engineer, Refrigeration US Foods Holding CorpMechanical Engineer, RefrigerationNew York, NY$100,000–$155,000 / yearThis role provides subject-matter expertise for ammonia (NH), Co2 and Freon-based systems, ensuring safe operation, regulatory compliance, reliability, and energy efficiency in support of operational and business objectives. Internal Relationships: This role partners closely with Operations, Facilities, Maintenance, EHS, Asset Management, and Capital Engineering teams to ensure safe, reliable, and compliant refrigeration system performance.
Mechanical Engineer STV Group IncMechanical EngineerNY$149,671.54–$171,053.19 / yearThis role is ideal for an experienced mechanical engineer with strong HVAC design capabilities, project leadership experience, and the ability to collaborate closely with multidisciplinary teams, clients, and junior technical staff. At STV, you will work alongside experienced professionals, contribute to technical design strategy, mentor emerging talent, and help clients achieve innovative, sustainable, and resilient building solutions.
NewSenior Mechanical Engineer STVSenior Mechanical EngineerEmpire State Building, New YorkStrong knowledge of HVAC systems, chilled water and heating hot water systems, central utility plants, ventilation and exhaust systems, building automation and controls integration, and energy-efficient building systems. At STV, you will work alongside industry-leading professionals, influence project strategy, mentor future engineering talent, and help clients achieve innovative, sustainable, and resilient building solutions.
MECHANICAL ENGINEER Tetra Tech IncMECHANICAL ENGINEERIthaca, NY$90,000–$100,000 / yearWith 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. This position involves collaborating closely with architects, structural engineers, electrical engineers, and other design professionals to develop innovative, sustainable, and cost-effective mechanical solutions that meet project goals and client requirements.
Senior Mechanical Engineer, Rail + Transit (Design) T.Y. Lin International Group LtdSenior Mechanical Engineer, Rail + Transit (Design)NY$120,000–$160,000 / yearTYLin's Rail + Transit team is growing, and we are seeking a Senior Mechanical Engineer to support the design of high-performance mechanical systems for some of the most complex transit infrastructure projects in the country. This role is ideal for an experienced mechanical engineer who takes pride in technical excellence, enjoys solving challenging design problems, and is motivated by the opportunity to shape modern transit environments.
Associate Mechanical Engineer Encorus GroupAssociate Mechanical EngineerSpringville, NYFull timeIn this role, you'll support the design of mechanical systems, prepare engineering drawings and technical documentation, collaborate with multidisciplinary teams, and assist with field investigations and construction support. Are you a Mechanical Engineering graduate or an early-career engineer looking for an opportunity that offers strong mentorship and exposure to a variety of projects?
Mechanical Engineer GpacMechanical EngineerManhattan, NY100000–130000GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990. We are extremely competitive, client-focused and realize that our value is in our ability to deliver the right solutions at the right time.
Mechanical Engineer, Bureau of Environmental Sciences and Engineering City of New YorkMechanical Engineer, Bureau of Environmental Sciences and EngineeringQueens, NYThe Office of Building Water System Oversight (BWSO) within the Bureau of Environmental Sciences and Engineering (ESE) is responsible for conducting inspections to ensure compliance with various rules and regulations aimed at improving the operating conditions of various engineered systems such as cooling towers, water tanks, evaporative condensers, internal plumbing, and wastewater systems in order to prevent risks associated with these systems. Special Note: In addition to above qualification requirements, to be eligible for placement in Assignment Levels II and III, individuals must have at least one year within the last three years of experience as a major contributor or a project leader on a complex project requiring additional and specific expertise in the disciplines needed to design or construct the project.
NewSENIOR MECHANICAL ENGINEER-ONSITE Schneider Packaging EquipmentSENIOR MECHANICAL ENGINEER-ONSITESyracuse, NY$100,000–$130,000 / yearThrough a broad range of robotic and non-robotic equipment, ability to integrate solutions seamlessly across portfolio companies, and full sales and service coverage, Pacteon is uniquely positioned to design flexible and custom solutions for your automation needs. Headquartered in Upstate New York, we design state-of-the-art machinery for customers in industries such as: food and beverage, dairy, pharmaceutical, personal care, plastics, and paper.
NewAssociate, Mechanical Engineer L3Harris Technologies IncAssociate, Mechanical EngineerNorth Amityville, NY$68,000–$126,000 / yearEngineers will be responsible for research, development of layouts, preparation of engineering drawings, and coordination of design activities with Tooling, Flight Sciences, Manufacturing, and Production to ensure that designs meet requirements at minimum cost. Qualifications: To be eligible, applicants must be pursuing a bachelor's degree Mechanical/Aerospace/Aeronautical/Civil Engineering/closely related degree or have completed their bachelor's degree within the last 12 months, regardless of age.
NewMECHANICAL DESIGN ENGINEER Integrated Resources, IncMECHANICAL DESIGN ENGINEERTown of Big Flats, New YorkContractorJob DescriptionNeed a Mechanical Engineer/Mechanical Designer with tool design experience to design job change parts, small mechanical subassemblies (grippers, magazines, trays, fixtures, etc.).QualificationsManager must haves: -Design/Vendor Management Skills -SolidWorks proficiency (design, create drawings and layouts) -Works independently (minimal direction) -Hands on engineer (not a delegator)- 7 years hands on exp with Solidworks - Experience managing venders and design teams - Specific tool design experience By continually exceeding their expectations, we have built successful ongoing partnerships that help us stay true to our commitments of performance and integrity.
Staff Mechanical Engineer - Furnaces & Thermal Equipment (Painted Post, NY, US, 14870) Corning IncStaff Mechanical Engineer - Furnaces & Thermal Equipment (Painted Post, NY, US, 14870)NY$95,227–$130,938 / yearJoin Corning's Manufacturing, Technology and Engineering (MT&E) Corporate Engineering organization and support the design, engineering, specification, installation and commissioning of the thermal equipment used in Corning's manufacturing operations. Lead thermal equipment engineering projects from concept and process definition through equipment specification, vendor selection, procurement support, factory acceptance testing, installation, startup, and commissioning.