M&S Software Engineer DCS CorporationM&S Software EngineerAlbuquerque, NMAs a member of our team, you will support defense technologies along with research and development in Albuquerque, NM, having opportunities to work in a dynamic environment, with state-of-the-art simulation technologies, simulation integration experts, and experienced military Subject Matter Experts (SMEs). Our work focuses on conducting capability assessments for emerging military technologies and ensuring related tools and methodologies are suitable to inform Department of Defense (DoD) decision makers.
Mechanical Engineer StratAcuity Staffing Partners IncMechanical EngineerAlbuquerque, NM$55–$65 / hourIn terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Everforth Apex also offers a HSA (Health Savings Account on the HDHP plan), a SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions, a corporate discount savings program and other discounts.
Mechanical Engineer (5+ years): Mechanical-Fluidic Systems X-Bow SystemsMechanical Engineer (5+ years): Mechanical-Fluidic SystemsSocorro, NMFull timeSpecifically, you will join a multi-disciplinary team responsible for all aspects of requirement verifications, upgrade and anomaly resolution, design, analysis, test, and deployment of hardware and control sub-systems related to a disruptive new method for nitrocellulose production. To thrive in this role, you must have demonstrated success in fluid mechanics analysis, mechanical design, thermal/stress analysis, and test with an aptitude for hands-on definition of industrial CONOPS and commissioning of complex industrial/chemical systems.
Staff Mechanical Engineer KBR IncStaff Mechanical EngineerLas Cruces, NMServe as a technical lead for complex projects by developing schedules, establishing technical baselines, managing engineering scope, and guiding teams toward timely and cost-effective completion. This role will lead the design, development, integration, and validation of mechanical systems for ground-based mobile satellite communication systems, antenna manufacturing, and radio frequency engineering programs.
Mechanical Engineer 1/2 Los Alamos National LaboratoryMechanical Engineer 1/2Los Alamos, NM$96,600–$158,000 / yearstrong>Note to Applicants: Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China - including the special administrative regions of Hong Kong and Macau - as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Directive 206.2: Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 .
Mechanical Engineer CACIMechanical EngineerAlbuquerque, New MexicoPay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. - Experienced in developmental and qualification testing to include providing input to test plans and procedures, conducting testing evolutions and correcting deficiencies.
NewMechanical Engineer, Refrigeration US Foods Holding CorpMechanical Engineer, RefrigerationSanta Fe, NM$100,000–$155,000 / yearThis role provides subject-matter expertise for ammonia (NH), Co2 and Freon-based systems, ensuring safe operation, regulatory compliance, reliability, and energy efficiency in support of operational and business objectives. Internal Relationships: This role partners closely with Operations, Facilities, Maintenance, EHS, Asset Management, and Capital Engineering teams to ensure safe, reliable, and compliant refrigeration system performance.
Mechanical Engineer TechStaff, IncMechanical EngineerAlbuquerque, NMIn this position, the ideal candidate performs conceptual design through construction administration and post-occupancy, coordinating with multiple disciplines and as Mechanical Engineer, ensuring projects are delivered within budget and on schedule. Our client is one of the top 100 Mechanical, Electrical, Plumbing and Technology Consulting Engineering firms in the nation with a reputation for superb design services.
Senior Mechanical Engineer - 3D Facility Characterization Red Gate Group LtdSenior Mechanical Engineer - 3D Facility CharacterizationAlbuquerque, NMPredictive Tool Familiarity: Strong working knowledge of how structural volume data and internal facility layouts constrain DoD hazard prediction toolsets, specifically Hazard Prediction and Assessment Capability (HPAC) and Vapor, Liquid, and Solid Tracking (VLSTRACK). Education: Bachelor's degree in Mechanical Engineering, Civil/Structural Engineering (with heavy structural dynamics/geo-mechanical focus), Aerospace Engineering, or a highly relevant STEM discipline; Master's degree or Doctorate (Ph.
Nuclear Facilities Engineer 3 OR 4 (Mechanical Engineer) Los Alamos National LaboratoryNuclear Facilities Engineer 3 OR 4 (Mechanical Engineer)Los Alamos, NM$128,000–$215,900 / yearNote to Applicants: Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Ability to work independently with minimal guidance for assigned tasks and effectively communicate engineering solutions both verbally and written with management, customers, peers, and craft personnel and to manage multiple tasks requiring varying resource needs and deadlines.
Nuclear Facilities Engineer 3/4 (Mechanical Engineer) Los Alamos National LaboratoryNuclear Facilities Engineer 3/4 (Mechanical Engineer)Los Alamos, NM$128,000–$215,900 / yearNote to Applicants: Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Ability to work independently with minimal guidance for assigned tasks and effectively communicate engineering solutions both verbally and written with management, customers, peers, and craft personnel and to manage multiple tasks requiring varying resource needs and deadlines.
Mechanical Engineer – Fort Hood Accura EngineeringMechanical Engineer – Fort HoodAlbuquerque, New MexicoMechanical Engineer- Fort Hood ***Work Location: Fort Hood, TX*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Position Summary The Mechanical Engineer will provide engineering and commissioning support for federal construction projects at Fort Hood, Texas. The selected candidate will be responsible for reviewing technical aspects of design and construction activities, evaluating mechanical systems, supporting commissioning efforts, reviewing project documentation, and ensuring compliance with contract requirements, codes, and project objectives throughout all phases of construction.
NewMechanical Engineer Leidos Holdings IncMechanical EngineerAlbuquerque, NM$131,300–$237,350 / yearSolutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Design and develop electromechanical assemblies and supporting parts, including: Electronics enclosures and packaging, mobile platforms, machined and sheet metal parts, 3D printed parts.
Mechanical Engineer (Willing to Consider All Mid to Sr. Levels) Mechanical Engineer Redwire SpaceMechanical Engineer (Willing to Consider All Mid to Sr. Levels) Mechanical EngineerAlbuquerque, New MexicoTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Loadpath, LLC part of the Redwire Space Missions team in Albuquerque, NM has a current opportunity for a Mechanical Engineer (willing to consider all mid to senior levels) to join our advanced design team located at our facility in Albuquerque, NM .
Mechanical Engineer (Willing to Consider All Mid to Sr. Levels) Mechanical Engineer Redwire CorpMechanical Engineer (Willing to Consider All Mid to Sr. Levels) Mechanical EngineerAlbuquerque, NMTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Education: Bachelor's degree from an accredited university, with 5 or more years of related work experience in Aerospace, Space, Energy, Semiconductor, Subsea, or other high reliability industries.
Mechanical Engineer CACI International IncMechanical EngineerAlbuquerque, NM$60,100–$123,200 / yearPay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Job Title: Mechanical Engineer Job Category: Engineering Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type: Regular Percentage of Travel Required: Up to 25% Type of Travel: Continental US.
Mechanical Design Engineer - Space Hardware (R&D Engineer 1/2) Los Alamos National LaboratoryMechanical Design Engineer - Space Hardware (R&D Engineer 1/2)Los Alamos, NM$96,600–$158,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. The Intelligence and Space Research Division at LANL has more than 60 years of experience designing, building, and operating ground-, air-, and space-based systems supporting nuclear nonproliferation, treaty verification, remote sensing, space situational awareness, and NASA missions including Curiosity, Perseverance, IBEX, Van Allen Probes, and IMAP.
Mechanical Engineer Mewbourne Oil CompanyMechanical EngineerHobbs, New MexicoThis may involve artificial lift design, surface equipment design, chemical program design, evaluation of compression, emission control design, automation, troubleshooting problems such as equipment malfunctions or wellbore integrity issues. Mewbourne Oil Company is committed to developing well‑rounded engineers, and our “boots on the ground” philosophy places operations engineers as close to the wellsite as possible to streamline supervision and promote efficient, responsible operations.
Mechanical Engineer Stantec IncMechanical EngineerAlbuquerque, NMWork with a team of design colleagues to conceptualize and develop full documentation for new construction and renovation projects for multiple types of facilities such as advanced technologies, industrial, healthcare, mission critical, higher education, research laboratories or similar applications. Primary Location: United States | NM | Albuquerque Organization: BC-2358 Buildings-US Acquisition PSP Mountain BE Employee Status: Regular Business Justification: New Position Travel: No Schedule: Full time Job Posting: 30/03/2026 07:03:35 Req ID: 1005129.
Mechanical Engineer NV5Mechanical EngineerAlbuquerque, New MexicoOverview: NV5 is a provider of engineering and consulting services to public and private sector clients, delivering solutions through six business verticals: Testing, Inspection & Consulting; Infrastructure; Utility Services; Environmental Health Sciences; Buildings & Program Management; and Geospatial Technology. Demonstrated experience in the design of commercial, industrial, educational, and governmental buildings, small industrial plants and warehouses, central chilled water and heating plants.
Mechanical Engineer - Cheyenne, WY Accura EngineeringMechanical Engineer - Cheyenne, WYAlbuquerque, New MexicoWarren AFB (Cheyenne, WY) *** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities : Candidate will provide engineering services on several simultaneous federal projects ranging in value up from tens of millions to hundreds of millions of dollars in construction value. Emphasis is placed on knowledge and experience with but not limited to HVAC systems, system controls, building automation, chilled water, plumbing, humidification, data centers, and other complex mechanical-engineering related elements found in large and complex buildings and utility plants.
NewSenior Mechanical Engineer - 3D Facility Characterization Red Gate GroupSenior Mechanical Engineer - 3D Facility CharacterizationAlbuquerque, NMPreferred ExperienceHands‑on experience preparing 3D facility geometries for high‑rate physics solvers such as LS‑DYNA, ANSYS Autodyn, or CTH.Experience with terrestrial laser scanners, mobile mapping systems, or robotic platforms for GPS‑denied underground mapping. You will utilize advanced geospatial imaging, LiDAR, and computer‑aided engineering (CAE) to reconstruct complex subterranean environments into high‑fidelity 3D CAD geometries for blast‑effects modeling and hazard predictions.
Shift Mechanical System Engineer (Nuclear Facilities Engineer 2/3) Los Alamos National LaboratoryShift Mechanical System Engineer (Nuclear Facilities Engineer 2/3)Los Alamos, NM$106,400–$176,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Demonstrated experience using engineering tools and technology aided platforms, including CAD and CAE systems, to develop solutions to complex technical problems, including the ability to utilize or develop specialized analytical tools or calculation methods.
Mechanical Engineer 1/2 (Nuclear Facilities Engineer 1/2) Los Alamos National LaboratoryMechanical Engineer 1/2 (Nuclear Facilities Engineer 1/2)Los Alamos, NM$96,600–$158,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Education/Experience at higher level: Position requires a Bachelor's Degree in Engineering from an accredited college or university and a minimum of 3 years practical work experience to the degree necessary to perform the responsibilities outlined above.
Mechanical Design Engineer (R&D Engineer 2/3) Los Alamos National LaboratoryMechanical Design Engineer (R&D Engineer 2/3)Los Alamos, NM$106,400–$176,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. In addition to the responsibilities outlined at the lower level, the selected candidate at this level is expected to possess in-depth knowledge of mechanical engineering principles previously stated for R&D Engineer 2, project execution, and the mechanical design of accelerator components and ancillary systems.
Mechanical Engineer IV-HVAC Professional Project Services IncMechanical Engineer IV-HVACAlbuquerque, NMPrinciple Areas of Responsibility: HVAC - in developing process flow diagrams, and sequences of operations; selection and layout of mechanical equipment and associated piping systems; and developing mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls, etc.
Senior Mechanical Engineer – 3D Facility Characterization & Weapons Effects Analysis NoblisSenior Mechanical Engineer – 3D Facility Characterization & Weapons Effects AnalysisAlbuquerque, New Mexico$144,720–$226,195 / yearFull timeCompensation at Noblis is determined by various factors, including but not limited to, the combination of education, certifications, knowledge, skills, competencies, and experience, internal and external equity, location, clearance level, as well as contract-specific affordability, organizational requirements and applicable employment laws. This position requires deep technical expertise across structural mechanics, blast dynamics, and weapons-target interaction, as well as the ability to collaborate with multidisciplinary teams in a fast-paced, mission-driven environment supporting national security objectives.
Senior Mechanical Engineer - 3D Facility Characterization & Weapons Effects Analysis Noblis IncSenior Mechanical Engineer - 3D Facility Characterization & Weapons Effects AnalysisAlbuquerque, NM$144,720–$226,195 / yearCompensation at Noblis is determined by various factors, including but not limited to, the combination of education, certifications, knowledge, skills, competencies, and experience, internal and external equity, location, clearance level, as well as contract-specific affordability, organizational requirements and applicable employment laws. This position requires deep technical expertise across structural mechanics, blast dynamics, and weapons-target interaction, as well as the ability to collaborate with multidisciplinary teams in a fast-paced, mission-driven environment supporting national security objectives.
Nuclear Facilities Engineer 1/2 (Mechanical Engineer) Los Alamos National LaboratoryNuclear Facilities Engineer 1/2 (Mechanical Engineer)Los Alamos, NM$96,600–$158,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Engineers in this space apply broad, diversified expertise to develop high impact deliverables, leverage advanced nuclear engineering technologies, and continuously refine processes to meet evolving mission demands and customer expectations.
Infrastructure Mechanical Engineer Pacific FusionInfrastructure Mechanical EngineerAlbuquerque, New MexicoWe are rapidly designing and building a pulser-driven inertial fusion system to achieve net facility gain (more fusion energy output than stored energy input). We are united by a shared sense of urgency to provide clean power for the world, particularly managing climate change while meeting growing global energy demand.
Mechanical Engineer (Nuclear Facilities Engineer) HiFyveMechanical Engineer (Nuclear Facilities Engineer)New MexicoThis role applies DOE Orders, nuclear safety requirements, and national codes to ensure safe, compliant, and reliable facility systems. Engineers work across system, design, project, and safety functions in close coordination with operations, maintenance, and project teams.
Mechanical Engineers Strata-G, LLCMechanical EngineersAlbuquerque, NMOur team of intellectually curious and highly motivated engineers, scientists and business professionals engages with our clients to solve complex energy and environmental challenges around the world. Tests for the absence of any illegal drug as defined in 10 CFR 707.4, will be conducted by Strata-G and a background investigation by the Federal government may be required to obtain an access authorization prior to employment.
Mechanical Engineer Booz Allen HamiltonMechanical EngineerAlbuquerque, New MexicoOnsite : If this position is listed as onsite, work will primarily be performed at a Booz Allen office or customer facility, where employees will collaborate directly with colleagues and customers as required by the role. Salary at Booz Allen is determined by various factors, including but not limited to location, the individual’s particular combination of education, knowledge, skills, competencies, and experience, as well as contract-specific affordability and organizational requirements.
Mechanical Project Engineer Wilson & CompanyMechanical Project EngineerAlbuquerque, New MexicoIf you are a self-motivated professional who is looking to take on more responsibility in leading projects related to MEP building design, while seeking an employer that will focus on your specific career goals delivering high-quality professional services, then we encourage you to strongly consider this position. Coordination of communications between the project team, the engineering and design team members to assure quality of work, and that consistent technical content drawing/design packages are maintained throughout a project.
DARHT Mechanical Engineered Systems Tec (Engineered Systems Tec 2/3) Los Alamos National LaboratoryDARHT Mechanical Engineered Systems Tec (Engineered Systems Tec 2/3)Los Alamos, NM$54,900–$84,300 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Core responsibilities of the Mechanical and Engineering Team include: (a) troubleshooting, maintaining, and upgrading of the Dual-Axis Radiographic Hydrodynamic Test (DARHT) accelerator mechanical systems (water, glycol, vacuum, mechanical alignment, etc.), and (b) designing, modeling, developing, and implementing new mechanical systems to support the DARHT accelerators.
senior-mechanical-engineer-aviation-federal-albuquerque Burns & McDonnellsenior-mechanical-engineer-aviation-federal-albuquerqueAlbuquerque, NMDescription The Senior Mechanical Engineer will lead mechanical design project teams in Albuquerque, NM to create world-class designs for new projects, alterations and redevelopments on a variety of projects that will primarily support the local Department of Energy (DOE) complexes. It is anticipated that they will have direct contact with our local clients in managing discipline-specific work under Basic Ordering Agreements (BOAs) and large Federal budget line-item projects.
Senior Mechanical Engineer Stantec IncSenior Mechanical EngineerAlbuquerque, NMWe are seeking a highly skilled Senior Mechanical Engineer to lead HVAC system design-including airside, hydronic, and steam systems-across a diverse portfolio of multidisciplinary (A&E) projects. This role will support major market sectors such as Mission Critical, Healthcare, Utility Plants and Campus Distribution, Corporate/Commercial, and Laboratories.
Mechanical Facilities HVAC Design Engineer Merrick & CoMechanical Facilities HVAC Design EngineerAlbuquerque, NMAir-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). Project work will encompass: Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations.
NewSr. Mechanical Integration Engineer - Space Technologies AeroVironment IncSr. Mechanical Integration Engineer - Space TechnologiesAlbuquerque, NM$91,000–$138,750 / yearThey also collaborate with lead Mechanical engineers, Technical leads and Procurement personnel to finalize drawings, work with Machine shops on technical questions and define inspection plans for critical parts. In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction.
Mechanical Engineer NV5 Global IncMechanical EngineerAlbuquerque, NMNV5 is a provider of engineering and consulting services to public and private sector clients, delivering solutions through six business verticals: Testing, Inspection & Consulting; Infrastructure; Utility Services; Environmental Health Sciences; Buildings & Program Management; and Geospatial Technology. Demonstrated experience in the design of commercial, industrial, educational, and governmental buildings, small industrial plants and warehouses, central chilled water and heating plants.
NewSr. Mechanical Engineer - Space Technologies AeroVironment IncSr. Mechanical Engineer - Space TechnologiesAlbuquerque, NM$111,500–$170,000 / year12 years' mechanical engineering experience in one or more of the following areas: Structural and thermal analysis including analytical calculations and FEA (stress analysis, modal analysis, thermal conduction analysis, bolt loads, etc.). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction.
NewMechanical Engineer - Space Technologies AeroVironment IncMechanical Engineer - Space TechnologiesAlbuquerque, NM$91,000–$138,750 / year5 years' mechanical engineering experience in one or more of the following areas: Structural and thermal analysis including analytical calculations and FEA (stress analysis, modal analysis, thermal conduction analysis, bolt loads, etc.). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction.
Propulsion Engineer (will consider all Sr. levels) (Mechanical Engineer) Redwire CorpPropulsion Engineer (will consider all Sr. levels) (Mechanical Engineer)Albuquerque, NMRedwire Space Missions LLC, has an exciting opportunity for a Propulsion Engineer (will consider all senior levels), responsible for the definition, integration, and technical oversight of spacecraft propulsion subsystems supporting maneuvering, station-keeping, and end-of-life disposal across Space Missions programs. Experience with performance modeling (CEA-equilibrium for chemical, EP thruster curve fits), duty cycles, life models, thermal/structural margins, and fault detection, isolation, and recovery (FDIR) strategies for autonomous operations.
Mechanical Facilities HVAC Design Engineer Merrick & CompanyMechanical Facilities HVAC Design EngineerAlbuquerque, New MexicoFull timeAir-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). Project work will encompass: Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations.
Cognizant Mechanical System Engineer (Mechanical Nuclear Facilities Engineer 1/2) Los Alamos National LaboratoryCognizant Mechanical System Engineer (Mechanical Nuclear Facilities Engineer 1/2)Los Alamos, NM$96,600–$158,000 / yearNote to Applicants: Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China - including the special administrative regions of Hong Kong and Macau - as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Additional job requirements and Nuclear Facilities Engineer 2 level: Broad and/or unique knowledge of nuclear facility engineering systems, processes, and calculations; application of nuclear facility engineering methods; and application of technology aided nuclear facility engineering tools to nuclear facility engineering problems.
Sr. Mechanical Systems Engineer Virgin Galactic Holdings IncSr. Mechanical Systems EngineerNM$108,871–$166,036 / yearVirgin Galactic is an aerospace and space travel company, pioneering human spaceflight for private individuals and researchers with its advanced air and space vehicles. To conform to U.S. Government export regulations, applicant must be a U.S. Person (either a U.S. citizen, a lawful permanent resident or a protected individual as defined 8 U.S.C. 1324b(a)(3) or be able to obtain the required authorization from either the U.S. Department of State or the U.S. Department of Commerce.
Engineer I / II | Four Corners Power Plant - Mechanical Pinnacle West Capital CorpEngineer I / II | Four Corners Power Plant - MechanicalFRUITLAND, NM4) May provide oversight of engineering technical programs by managing the program requirements, working with cross organizational partners, reviewing and internalizing operating experience and coordinating corrective actions to ensure engineering program elements continue to remain healthy. This position may require access to and/or use of information subject to control under the Department of Energys Part 810 Regulations (10 CFR Part 810), the Export Administration Regulations (EAR) (15 CFR Parts 730 through 774), or the International Traffic in Arms Regulations (ITAR) (22 CFR Chapter I, Subchapter M Part 120) (collectively, U.S. Export Control Laws).
Quality Engineer 3 OR 4 (Certified Welding Inspector/Mechanical /QC) Los Alamos National LaboratoryQuality Engineer 3 OR 4 (Certified Welding Inspector/Mechanical /QC)Los Alamos, NM$106,400–$176,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. This position also monitors operations for adherence to project plans and specifications to ensure quality control compliance, performs inspection functions per inspection plans, records results of inspections / tests per applicable procedures, and is also responsible for implementations of quality control procedures and policies to ensure inspection / test activities to conform to applicable inspection / test plans, procedures, specifications.
Mechanical, I&C, or Structural Engineer 2/3 Los Alamos National LaboratoryMechanical, I&C, or Structural Engineer 2/3Los Alamos, NM$106,400–$176,000 / yearNote to Applicants: Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China - including the special administrative regions of Hong Kong and Macau - as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. DOE Order 426.2: This position is subject to DOE Order 426.2, Personnel Selection, Training, and Qualification Requirements for DOE Nuclear Facilities, which establishes entry-level requirements to ensure candidates selected for specific positions can successfully perform the requirements of the job.
Quality Engineer 1 or 2 (CWI Mechanical) Los Alamos National LaboratoryQuality Engineer 1 or 2 (CWI Mechanical)Los Alamos, NM$87,800–$143,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China - including the special administrative regions of Hong Kong and Macau - as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. As a QC Quality Engineer, you will be part of the Plutonium Infrastructure Quality (PIQ) group The PIQ mission is to support the Associate Laboratory Directorate for Plutonium Infrastructure (ALDPI) by ensuring quality requirements are implemented into work projects through oversight and inspection activities that verify compliance with specifications during construction, maintenance, and modification activities at LANL.