UNKNOWN

FEED

Main Position Responsibilities: Designs and develops mechanical and electricals projects to support site goals for productivity, cost efficiency, reliability and safety and enter project requests into the Mauser CapEx Portal. Ability to evaluate controls engineering problems, solve controls issues independently, and investigate technical problems and establish procedures and/or corrective actions to avoid reoccurrences.

YEAR

Mauser AG

Senior Controls Engineer

Maintain an active presence on project job sites to monitor project progress, verify site conditions, coordinate equipment deliveries, and proactively identify issues that could impact installation, start-up, or the overall project schedule. Review jobsite conditions prior to equipment delivery and start-up to identify potential concerns related to access, rigging, equipment placement, electrical requirements, piping, controls, clearances, and overall installation readiness.

Daikin Applied Americas Inc.

HVAC Project Engineer

This position is responsible for overseeing the Mechanical discipline scope of work and managing the discipline budget on small to medium projects of intermediate complexity, and coordinating with internal and external architects and engineers, as well as clients, construction managers, subcontractors, vendors and manufacturers. Typical tasks and deliverables include load calculations, utility assessments, energy modeling, design reports, code evaluations, plans, P&IDs, schedules, installation details, equipment and system selection and specification, and coordination with manufacturers and trade partners.

CRB Group, Inc.

Mechanical Engineer III

To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high-performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation.

Howmet Aerospace Inc

Manufacturing Engineer

Acquired by TDK in 2008, TDK-Lambda Americas Inc. represents the culmination of three well-established North American power manufacturers: Electronic Measurements Inc., Lambda Electronics, and Innoveta Technologies. This is accomplished by working closely with Customer Service Tester/Technicians repair work orders, following engineering and production drawings, bill of materials, and/or sample assemblies.

TDK-Lambda Americas

Mechanical Repair Tech

Tasks will include but not be limited to: Responsible for maintaining, monitoring, and performing preventive maintenance and continuous operation of all building systems to maintain 100% up-time including: fire/life safety, mechanical systems such as HVAC, chillers, CRAC, CRAH, plumbing, controls; electrical including emergency backup systems such as lighting, UPS, ATS, STS, PDU, generators, primary switchgear, power distribution, and transformers; and hot water systems. Individuals are expected to demonstrate technical expertise in one craft area (Electrical, HVAC, Piping/Plumbing, Central Utility Plant Operations) and be multi-skilled in others in order to successfully complete daily/weekly work assignments.

CyrusOne Management Services

Operating Engineer

ea_via_bold

Mechanical HVAC Engineer, Electrical Engineer, Project Manager, Federal Projects, MEP Engineering, Mission-Critical Facilities, Healthcare Engineering, DoD Projects, Revit, AutoCAD, Multidisciplinary Design, Engineering Leadership, Construction Administration, Quality Control, Client Management, Infrastructure Projects. As a Mechanical HVAC Engineer OR Electrical Engineer – Project Manager, you will take ownership of multi-million-dollar initiatives, guiding them from concept through completion while ensuring technical excellence, client satisfaction, and operational success.

Luxus

Mechanical HVAC Engineer - Project Manager

Crelate

ADAPTED_NOW

Work on mission-critical aerospace and defence technologiesJoin a stable industry leader with excellent benefits and career growth Bachelor's degree in Quality Engineering, Mechanical Engineering, Electrical Engineering, or a related technical discipline. Champion continuous improvement initiatives focused on process capability, efficiency, and product reliability.

Michael Page is one of the world's leading professional recruitment consultancies, specializing in the placement of candidates in permanent, contract, temporary and interim positions with clients around the world.
The Group has operations in the Americas, UK, Continental Europe, Asia-Pacific and Africa. 
In the US, we focus on the areas of:
<ul>
<li>Advisory</li>
<li>Banking and Financial Services</li>
<li>Finance and Accounting</li>
<li>Engineering and Manufacturing</li>
<li>Healthcare & Life Sciences</li>
<li>Human Resources</li> 
<li>Information Technology</li>
<li>Legal</li>
<li>Marketing</li>
<li>Page Personnel Office Support</li>
<li>Oil and Gas</li> 
<li>Procurement and Supply Chain</li>
<li>Real Estate and Construction</li>
<li>Sales</li>
</ul>

Michael Page

Quality Engineer - AS9100 - North Calwell, NJ

The actual base pay for the position may be influenced by factors such as education, training skills, qualifications, competencies, years of experience, job-related knowledge, and scope of the role, and could be outside of the posted pay range. Established for over 50 years, Yamazen Inc. is a leading importer and distributor of quality CNC manufacturing machinery, including machine tools and injection molding machines.

Through Yamazen, you're connected to the industry's most extensive network of application experts, a team developing cutting-edge solutions in virtually every area of manufacturing in markets around the world. The expertise gained is shared throughout the Yamazen network, ensuring all of our engineers have access to the most advanced information and techniques as they develop your unique solution.

Yamazen

Machine Tool Sales Engineer - Somerset, NJ

Monitor, prioritize and track the timely closure of NCs, CAPAs and Complaints for the Plainsboro Plant facility Facilitates the development, implementation and monitoring of quality programs and policies that ensure that the development, manufacture and distribution of medical products is in compliance with corporate policies, U.S. Food and Drug Administration regulations, ISO 9001, ISO 13485, the Medical Device Directive, the Canadian Medical Device Regulations (CMDR), and other applicable regulatory agencies. The Quality Assurance Engineer II will monitor, prioritize and track the timely closure of NCs and CAPAs for the Plainsboro Plant facility, participate in problem solving teams, and participate from a Quality Engineering & Quality Systems and Plant perspective on the launching of new or improved products/processes.

Integra LifeSciences

Quality Assurance Engineer II

The Senior Risk Engineer, Equipment Breakdown operates within the Chubb Commercial Risk Consulting department and is considered an integral component of the valued added services that we provide for our client base and commercial insurance policy holders. The individual provides risk improvement services to customers, including identifying exposures with significant loss potential, investigation of losses and evaluation of preventative maintenance management programs.

Chubb is the world&rsquo;s largest publicly traded property and casualty insurance company and the largest commercial insurer in the U.S.
With operations in 54 countries and territories, we are a major personal lines writer, as well as a leading middle market, small commercial and large industrial commercial insurer, providing a wide range of traditional and specialty coverages.
As an underwriting company, we assess, assume and manage risk with insight and discipline. We service and pay our claims fairly and promptly. And we combine the precision of craftsmanship with deep experience to conceive, craft and deliver the very best insurance coverage and service to individuals and families and to businesses of all sizes.
Our products and services are distributed through brokers, independent agents, exclusive agents and various forms of direct marketing.
What we deliver:
<ul>
<li>Extensive product and service offerings</li>
<li>Broad distribution capabilities</li>
<li>Service excellence</li>
<li>Risk expertise</li>
<li>Underwriting discipline</li>
<li>Exceptional financial strength</li>
<li>Local operations globally</li>
</ul>

Chubb Ltd

Senior Risk Engineer, Equipment Breakdown

Machine Tool Sales Engineer - Paterson, NJ

These technologies are used by customers to improve operational efficiencies, enhance product quality, protect plant assets, minimize environmental impact, and create cleaner and safer environments. The company’s product portfolio includes a broad array of water treatment chemistries, process aids, functional additives, cleaners, disinfectants, and state-of-the-art monitoring, control and delivery systems.

Diversey

Support Engineer - Industrial Water Treatment

In Thermal & Specialty Solutions (TSS), we harness next-generation, low-Global Warming Potential (GWP) technology to provide market-driven innovations to customers in the areas of Refrigerants, Propellants, Fire Protection, Foam Blowing Agents and heat transfer fluids for Thermal Management used in the building and construction segments, as well as Mobile and Stationary heating and cooling systems. In key sectors such as clean energy, advanced electronics, high-performance computing and AI, climate friendly cooling, and high-quality paints and coatings for homes and industrial infrastructure---sustainable solutions and more modern living depend on Chemours chemistry.

Chemours

Data Center Cooling Engineer - Technical Service

Guided by its mission to Make People and Nature Healthier Through Biotechnology, and its role as a well-recognized biotechnology company, GenScript has a team of approximately 6,165 employees and has served more than 200,000 customers across over 100 countries and regions. Founded in 2002 in New Jersey, GenScript Biotech Corporation accelerates innovation in biotech and healthcare by providing researchers and companies with the building blocks needed to develop groundbreaking treatments and products.

GenScript

Automation Engineer

GreenHouseAPI

GenScript ProBio

Food Ingredients: Innovating improved nutritional profiles, better taste and texture, and greater cost efficiency to meet the needs of global food and beverage manufacturers. By applying for this position, candidates acknowledge awareness that the role is part of the Food Ingredient business unit and has been identified to transition to CVC Capital Partners.

As a leading global creator of flavors and fragrances used in a wide variety of consumer products, millions of consumers around the world enjoy our products on a daily basis. Since the 19th century, IFF and its predecessor companies have worked closely with the world's leading brands in developing the scents and tastes for products that have become household names. Consumers experience these flavors and fragrances in beverages, sweets, dairy, and savory products, as well as fine fragrances, beauty care products, detergents, and household goods. By focusing on our core competencies of consumer insight, research &#38; development, and creative expertise, we continue to be an integral part in helping our 
 customers drive consumer preference and grow the equity of their brands.

International Flavors & Fragrances

Manufacturing & Reliability Engineer

Job Summary: Seeking an experienced, self-motivated and detail-oriented individual to plan, implement and coordinate EHS programs, policies, and ensure regulatory compliance for the Garnet operations at the Coherent sites in Easton, PA and Hillsborough, NJ. Assists in tracking and communicating Federal, State and Local regulations, identifies impacts to the site and develops and implements actions to comply within the published guidelines.

LightWorks Optical Systems

Sr. EHS Engineer

Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you'll get the training and support from your team that you need to excel in your role and reach your full potential. If you're ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you're ready to join CMC.

Commercial Metals Co

Rolling Mill Process Engineer

Perform routine inspection, preventive maintenance, calibration, and troubleshooting of automated sortation systems, conveyor systems, barcode scanners, DWS systems, and other material handling equipment. Monitor key maintenance KPIs, including MTBF (Mean Time Between Failures), and continuously improve equipment reliability while reducing maintenance costs.

Mechanical Engineer Jobs in New Jersey

Senior Controls Engineer Mauser AG

HVAC Project Engineer Daikin Applied Americas Inc.

Mechanical Engineer III CRB Group, Inc.

Manufacturing Engineer Howmet Aerospace Inc

Mechanical Repair Tech TDK-Lambda Americas

Operating Engineer CyrusOne Management Services

Mechanical HVAC Engineer - Project Manager Luxus

Quality Engineer - AS9100 - North Calwell, NJ Michael Page

Machine Tool Sales Engineer - Somerset, NJ Yamazen

Quality Assurance Engineer II Integra LifeSciences

Senior Risk Engineer, Equipment Breakdown Chubb Ltd

Machine Tool Sales Engineer - Paterson, NJ Yamazen

Support Engineer - Industrial Water Treatment Diversey

Data Center Cooling Engineer - Technical Service Chemours

Automation Engineer GenScript

Automation Engineer GenScript ProBio

Manufacturing & Reliability Engineer International Flavors & Fragrances

Sr. EHS Engineer LightWorks Optical Systems

Rolling Mill Process Engineer Commercial Metals Co

Automation Equipment Engineer SwiftX Inc.

Similar Job Searches

Stand out to leading employers.