145 Results for

Mechanical Engineer Jobs in Lenexa, KS

Jobs

Kansas City, MO

p>We are seeking a highly experienced and technically proficient Mechanical Engineer IV to lead the design and engineering of HVAC and mechanical utility systems across complex, multidisciplinary projects. This position requires deep knowledge of mechanical systems, strong coordination skills, and the ability to interface with clients, architects, engineers, construction managers, vendors, and trade partners.

30+ days ago

$152,000–$159,000 / year

li>Prepare mechanical engineering designs, drawings, As-Builts, systems specifications, equipment lists, general arrangements, aux power demands, and process flow diagrams (PFDs) and procurement packages for equipment/components, technical bid evaluation from vendors, and vendor selection. Our staff leads the power markets engineering process and collaborates with Kiewit's construction teams to approach construction-driven engineering with a focus on safe, cost-effective, and innovative designs that achieve client expectations and further Kiewit's legacy of excellence.

30+ days ago

Lenexa, KS

You'll work within multidisciplinary project teams, coordinate across disciplines, contribute to design calculations and documentation, and begin to take ownership of project scopes under the guidance of senior engineers.

As a Design Mechanical Engineer, you will apply your building systems design experience and developing knowledge of regulated facility requirements to produce high-quality mechanical engineering deliverables.

2 days ago

Kansas City, MO

This position is responsible for overseeing the Mechanical discipline scope of work and managing the discipline budget on all project phases, sizes and levels of complexity, and coordinating with internal and external architects and engineers, as well as clients, construction managers, subcontractors, vendors and manufacturers.

Works with a Project Manager on proposal development, designs task identification, man-hour planning and project scheduling for the mechanical scope of work on projects.

30+ days ago

Kansas City, MO

li>

Lead mechanical facility design for project phase-specific deliverables, which include, but are not limited to: airflow diagrams, HVAC zoning plan, pressurization map, HVAC and process utility sequence of operations, process utility summaries, piping & instrumentation diagrams (P&IDs), equipment list, line list, instrument list, tie-point list, HVAC layout drawings, plumbing layout drawings, demolition drawings, general arrangements, permit-required drawings, and piping design.

Perform on-site utility audits for systems including, but not limited to: natural gas, domestic cold/hot water, compressed gas, glycol, steam, process/sanitary/storm plumbing, and HVAC.

21 days ago

Lenexa, KS

$105,000–$135,000 / year

li>Work with multidisciplinary teams to create integrated building solutions that respond to client spatial, functional, and budgetary needs.

Lead design of HVAC, plumbing, and mechanical utility systems, for complex biopharmaceutical and biotech manufacturing facilities.

30+ days ago

De Soto, Kansas

p>Panasonic Energy prioritizes total well-being and offers comprehensive benefits options to support physical, emotional, financial, social, and environmental health:

Health Benefits – Offering medical, dental, vision, prescription plans, plus Health Savings Account and Flexible Spending Account options.
Health Management and Wellbeing Programs –Lifestyle Spending Account, EAP, virtual health management, chronic condition, neurodiversity, tobacco cessation, substance abuse support, and life stage and fertility resources.

30+ days ago

Kansas City, MO

$100,000–$145,000 / year

div>The Staff Mechanical Engineer will work with the project team to create world-class designs for new projects, alterations, and redevelopments on a variety of natural gas facilities, including compressor stations, meter and regulator stations, and renewable natural gas facilities.

Qualifications

Bachelor's Degree in Mechanical Engineering or related degree from an ABET-accredited program, and 3 years of mechanical engineering experience required.

18 days ago

De Soto, KS

Facilities Mechanical Engineer https://www.youtube.com/watch?v=0tMgKm_71qs (by clicking this link you are being referred to an external site that is not part of Panasonic) Meet the Recruiter: Denise Goetz Summary: Join us at Panasonic Energy as we expand to De Soto, Kansas, where we're building the world's largest lithium-ion battery factory. The role partners closely with Operations & Maintenance, Production, and Engineering teams to troubleshoot issues, implement best practices, and deliver innovative solutions that support occupant safety, indoor environmental quality (IEQ), production reliability, and energy efficiency.

30+ days ago

Lenexa, KS

$100,000–$160,000 / year

Building types include administration/office buildings, nuclear buildings, data centers/server rooms, battery storage, warehouses, distribution facilities, wastewater and water treatment facilities, industrial process buildings, and transportation facilities such as bus/train stations and maintenance facilities. You will be designing and managing fast-paced MEP designs for a diverse portfolio of projects, including coordination and collaboration with in-house project engineers and contractors to successfully execute building estimates, conceptual designs, and construction documents and administration.

19 days ago

Independence, MO

$101,300–$152,600 / year

Additionally, you will drive the technical success of construction projects managed by the US Army Corps of Engineers (USACE) and Olin Winchester, guiding them from the Vendor Scope of Work (VSOW) phase through design review, construction QA/QC, and final commissioning.

This position requires access to ITAR controlled technical data, and as such, employment will be contingent upon the candidate''s ability to access ITAR controlled technical data pursuant to an export license approved by the Directorate of Defense Trade Controls, if required.

30+ days ago

Kansas City, MO

li>

Support mechanical facility design for project phase-specific deliverables, which include, but are not limited to: airflow diagrams, HVAC zoning plan, HVAC and process utility sequence of operations, process utility summaries, piping & instrumentation diagrams (P&IDs), equipment list, line list, instrument list, tie-point list, HVAC layout drawings, plumbing layout drawings, demolition drawings, general arrangements, permit-required drawings, and piping design.

Support on-site utility audits for systems including, but not limited to: natural gas, domestic cold/hot water, compressed gas, glycol, steam, process/sanitary/storm plumbing, and HVAC.

4 days ago

Leavenworth, KS

Part time

p>The ideal candidate is recognized as a strong mechanical engineering expert, comfortable operating across product design, manufacturing, cost, and operations, and motivated to mentor others while advancing Hallmark’s manufacturing capabilities.

Hallmark is seeking an experienced Mechanical Engineer to provide technical leadership in the design, development, and implementation of products, tooling, and manufacturing processes within our GP manufacturing environment.

6 days ago

Kansas City, MO

As a Senior Mechanical Engineer on Olsson's Facilities Engineering and Design Team, you'll provide high-level technical support and lead quality assurance/quality control (QA/QC) activities that drive excellence in healthcare facilities design.

Healthcare-related certifications such as ASHRAE Healthcare Facilities Design Professional (HFDP), ASSE 6060 Medical Gas Systems Designer, and/or ASSE 12080 Certified Legionella Water Safety & Management Specialist are a plus.

22 days ago

Independence, MO

$125,000–$155,000 / year

8 days ago

Leavenworth, KS

Hallmark is seeking an experienced Mechanical Engineer to provide technical leadership in the design, development, and implementation of products, tooling, and manufacturing processes within our GP manufacturing environment.

5 days ago

Kansas City, MO

Primary Responsibilities:

Perform various engineering duties related to evaluating, designing, and constructing plans for small to large-sized healthcare projects.

30+ days ago

li>Under the guidance of other engineers, support the system design concept, equipment sizing, equipment selection, system controls, and the finalized design for industrial buildings and administration buildings including: offices, server/computer rooms, warehouses, F type industrial, H type industrial, and Class I, Division 1 & 2.

Our rapidly growing Industrial and Water Engineering Group, which includes mechanical, process, electrical, controls, structural and architectural disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery.

11 days ago

Kansas City, MO

p>Olsson's Facility Engineering and Design Team leads the way in delivering innovative solutions for high-profile, technically complex projects. This role is ideal for an experienced engineer who thrives in a collaborative environment, enjoys mentoring others, and brings creative problem-solving to sophisticated engineering challenges.

30+ days ago

Kansas City, KS

Remote

$100,000–$130,000 / year

p>Our rapidly growing Industrial and Water Engineering Group, which includes mechanical, process, electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery of industrial projects in markets such as Consumer Products, Heavy Manufacturing, Industrial Buildings, Pulp and Paper, Mineral Processing, Renewable Natural Gas, and Industrial Water and Utilities.

Provide design, coordination, and oversight of various mechanical systems typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities including, but not limited to, process piping, conveying systems, dust collection, general plant/facility water, compressed air, steam, and gas systems.

30+ days ago

North Kansas City, MO

li>Healthcare-related certifications such as ASHRAE Healthcare Facilities Design Professional (HFDP), ASSE 6060 Medical Gas Systems Designer, ASSE 12080 Certified Legionella Water Safety & Management Specialist, Certified Healthcare Constructor (CHC), and/or Healthcare Physical Environment Worker, are a plus. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California.

22 days ago

Kansas City, MO

$120,000–$150,000 / year

This role supports a project-based engineering environment and works closely with internal teams, and client stakeholders to deliver safe, compliant, and constructible solutions. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

19 days ago

Kansas City, MO

Pipe supports and pipe routing • P&IDs • Mechanical Equipment Condition Assessment and Lifecycle cost analysis • Plumbing, sanitary & potable water • Pumping, piping any fluid or gas including blowers, steam & compressed air • Tank, vessel selection and sizing • Selection and location of instrumentation associated with pumps, vessels, and tanks • Other duties as assigned.

As a Lead Mechanical Engineer, you will be responsible for front-end planning, preliminary design, code analysis, final design, including bidding document and specification preparation, construction administration, including review of compliance submittals, and resolution of construction issues, and interfacing with Burns & McDonnell project managers, equipment suppliers, clients, other engineering disciplines, detailers, and designers.

30+ days ago

Lenexa, KS

Our staff leads the power markets engineering process and collaborates with Kiewit's construction teams to approach construction-driven engineering with a focus on safe, cost-effective, and innovative designs that achieve client expectations and further Kiewit's legacy of excellence.

Develop mechanical piping and instrument diagrams (P&IDs) for power plant systems including steam cycles, boiler feed, condensate, water treatment, flue gas, hydrogen, fuel handling, heat transfer systems, and utility systems.

30+ days ago

Overland Park, KS

$86,100–$150,950 / year

Work as an individual or as part of a cross-functional team of engineers, planners, and scientific professionals to execute project work on multiple concurrent projects, assist with laying out installation of equipment, calculating costs and quantities of material/equipment/labor, and ensuring project work conforms with specifications, permit applications, schematics, compliance documentation, and regulatory and technical analysis memos. Developed critical thinking and problem-solving skills required to apply technical knowledge to reach conclusions from testing results, data collation, load calculations, statistical analysis, and arriving at the most effective, economical, and logical solution.

30+ days ago

Overland Park, KS

p>This position supports engineering execution for new and existing power generation facilities, including simple-cycle and combined-cycle plants, and requires strong technical knowledge in thermodynamics, heat transfer, fluid systems, and equipment specification.

Note to staffing and direct hire agencies:

In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency.

30+ days ago

Kansas City, MO

$75,000–$90,000 / year

All aspects of production-ready design (safety, usability, reliability, etc.) Manufacture components where necessary and interface with shop technicians Assemble and test vehicle in concert with undergraduate and graduate students Documentation including but not limited to technical reports and briefings internally and externally.

The Missouri Institute for Defense and Energy (MIDE) at the University of Missouri-Kansas City, is a fast- growing research institute founded to solve real-world problems by synthesizing physics and engineering principals with a pragmatic, results-driven and collaborative philosophy.

30+ days ago

Kansas City, MO

$120,000–$150,000 / year

This role focuses on balance-of-plant piping design, 3D plant modeling, and cross-functional technical interfaces, while providing field support during construction and commissioning and maintaining rigorous design control throughout project execution. Field work may include visits to power generation sites, modular pipe rack installations, and plant construction areas to provide technical support, verify design implementation, and assist during commissioning activities.

21 days ago

Kansas City, MO

$120,000–$150,000 / year

20 days ago

Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the CCPA), this notice explains Olssons practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Coordinate with experienced engineers and designers on non-routine techniques and procedures; collaborate with other disciplines (structural, civil, electrical) to support integrated design.

30+ days ago

Overland Park, Kansas

p style="margin:0px">AEI consistently earns national recognition from leading industry publications, including Building Design+Construction, Engineering News-Record, and Consulting-Specifying Engineer, with distinctions such as being named the #1 Laboratory Engineering Firm in the nation and receiving multiple Best of the Best Project awards, underscoring the lasting legacy of our work.

As a Mechanical Engineer I in our Kansas City office, you will help us empower our clients to achieve energy-efficient building solutions, save global environments, and create a better, greener future for all.

30+ days ago

Kansas City, MO

$135,000–$210,000 / year

p>Description The Senior Mechanical Engineer will lead mechanical design project teams to create world-class designs for new projects, alterations, and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline, airports, institutional, industrial, manufacturing, government, and military facilities.

Quality review production drawings for a variety of projects and project-related data as required by the project managers to verify corrections are made within multiple CAD-related software.

30+ days ago

Kansas City, KS

Remote

$125,000–$170,000 / year

Manage the completion of all project design calculations and equipment specifications typical for biogas, bulk solids material handling, water and wastewater treatment, pump stations and pipeline conveyance, groundwater remediation, stormwater recycling, and other industrial facilities including, but not limited to, bulk solids conveyors, dust collection equipment, bins/tanks, pumps, heat exchangers, boilers, and other process equipment.

30+ days ago

Kansas City, MO

Remote

Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California.

For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

22 days ago

Overland Park, KS

p>Olsson's Facility Engineering and Design Team is recognized for delivering innovative solutions on technically complex, large-scale projects across diverse industries-including commercial developments, healthcare facilities, laboratories, educational institutions, data centers, and military installations.

As a Senior Mechanical Engineer, you will be a technical leader and strategic partner, driving excellence in design and execution for projects that shape communities and industries.

30+ days ago

Kansas City, MO

$95,000–$155,000 / year

p>Quality reviews and updates production drawings for a variety of projects and project-related data as required by the project managers to verify corrections are made within multiple CAD-related software.

As a Mechanical Engineer, you will work on project teams to create world-class designs for new projects, alterations, and redevelopments on a variety of power projects.

30+ days ago

Kansas City, MO

p>The Staff Mechanical Engineer will work on project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline airports, institutional, industrial, manufacturing, government and military facilities.

Modify and review production drawings for a variety of projects including, but not limited to: power plants, process facilities, industrial facilities, healthcare facilities, airports, educational institutions, commercial, and governmental and military facilities.

5 days ago

Kansas City, MO

p>Description The Staff Mechanical Engineer will work on project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline airports, institutional, industrial, manufacturing, government and military facilities.

30+ days ago

Kansas City, MO

p>The Staff Mechanical Engineer will work with the project team to create world-class designs for new projects, alterations, and redevelopments on a variety of natural gas facilities, including compressor stations, meter and regulator stations, and renewable natural gas facilities.

Bachelor's Degree in Mechanical Engineering or related degree from an ABET-accredited program, and 3 years of mechanical engineering experience required.

19 days ago

Kansas City, MO

p>The Staff Mechanical Engineer will work on project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power plants, process facilities, industrial facilities, healthcare facilities, airports, educational institutions, commercial, and governmental and military facilities.

30+ days ago

Kansas City, Missouri

Remote

td>

Demonstrates application of design, development, evaluation, and quality control techniques to routine through engineering projects;
Demonstrates application of analyzing engineering designs and specifications to achieve efficient and reliable manufacturing or acceptance processes; and.
Develops test procedures and performs routine to moderately complex engineering evaluation tests, product and process capability studies, quality audits, product or project data reviews, and other engineering evaluation work to assure product manufacturability.

30+ days ago

Overland Park, KS

$115,100–$205,040 / year

li>Lead larger-scale mechanical engineering projects ensuring contributors know what they are required to do and by when, preparing and overseeing relevant project budgets, monitoring external events, tracking hours and expenses, ensuring satisfactory performance, and supervising subcontractors, contract work, and employees.

Involved from project inception to completion in the management of mechanical design and construction of building and infrastructure projects, including rehabilitation and reconstruction, new builds, operating specifications, building materials, phasing, and construction safety plans.

11 days ago

Grandview, MO

$133,500–$186,898.95 / year

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.

Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.

30+ days ago

Olathe, KS

We develop and manufacture new products for the treatment of heart failure, cancer, stroke, Gene Therapy, COPD, TBI, Atrial Fibrillation, Blood Clots, Brain Surgery, and many more!

Experience applying Design for Manufacturability (DFM), Design for Assembly (DFA), and cost optimization principles, along with knowledge of manufacturing methods and production processes.

30+ days ago

Kansas City, KS

$100,000–$150,000 / year

div>

Very busy consulting engineering firm has an opening for a Mechanical Engineer. * Design mechanical systems (plumbing, HVAC, piping and fire protection).

Today

Olathe, KS

Full time

Manage basic tradeoffs, determine risk mitigation plans, determine project goal/objective feasibility, provide technical input to product development plans/concept documents, and drive process vendors to evaluate complex mechanical designs and understand risk. Bachelor's Degree in Mechanical Engineering, Manufacturing Engineering or Aerospace Engineering AND a minimum of 5 years relevant experience OR an equivalent combination of education and experience.

30+ days ago

Olathe, KS

Full time

Manage basic tradeoffs, determine risk mitigation plans, determine project goal/objective feasibility, provide technical input to product development plans/concept documents, and drive process vendors to evaluate complex mechanical designs and understand risk. Provide reliable solutions to a wide range of difficult problems using sound problem solving techniques and offer process improvements and author new procedures.

30+ days ago

Olathe, KS

Full time

Model basic parts and components including injection molded plastic, die cast aluminum and zinc, sheet metal, CNC machined and screw machine fabricated parts, compression molded rubber, extrusions, display components, flex circuits, touch panels, speaker enclosures, mounting systems, etc. Specify requirements for and source parts such as electrical connectors, speakers, microphones, LCD's, backlights, keypads, switches, electric motors, screw machined parts, rotary controls, batteries and antennas.

30+ days ago

Olathe, KS

Full time

Bachelor's Degree in Mechanical Engineering, Manufacturing Engineering or Aerospace Engineering AND 1 year relevant experience OR an equivalent combination of education and experience. In this role, you will be responsible for developing moderately complex mechanical solutions, testing and validating, completing technology explorations and/or delivering to mass production.

30+ days ago

Olathe, KS

Full time

Provides significant contribution to design reviews across multiple product types, offers process improvements, authors new procedures, and demonstrates broad understanding of Garmin's business model including operations, production, sales and marketing. Utilizes advanced testing capabilities and knowledge of materials to customize existing or develop new test methods to substantiate unverified aspects of product designs.

30+ days ago

Stand out to leading employers.

Upload your resume and let employers find you for new Mechanical Engineer job openings. Plus, receive relevant job matches delivered straight to your inbox.

Create A Free Account

Mechanical Engineer Jobs in Lenexa, KS

Senior Mechanical Engineer CRB Group, Inc.

Senior Mechanical Engineer - Kiewit Power Engineering Kiewit Corp

Design Mechanical Engineer - Life Sciences GBA Companies

Mechanical Engineer V CRB Group, Inc.

senior-mechanical-engineer-food-beverage-hvac-plumbing-process-utilities-kansas-city Burns & McDonnell

Senior Mechanical Engineer – Life Sciences GBA Companies

Sr. Facilities Mechanical Engineer PECNA Panasonic Energy Corporation of North America

Staff Mechanical Engineer ESPO Corporation

Sr. Facilities Mechanical Engineer Panasonic Corporation of North America

Mechanical Engineer - Industrial MEP Kiewit Corp

Mechanical Engineer - Facilities 6.8 Program Olin Corp

staff-building-mechanical-engineer-hvacplumbingprocess-utilities-kansas-city Burns & McDonnell

Mechanical Engineer - Manufacturing Hallmark Marketing Company LLC

Senior Mechanical Engineer – Healthcare Buildings Olsson

Sr. Mechanical Engineer P.E. Jobot

Mechanical Engineer - Manufacturing Hallmark Cards Inc

Mechanical Engineer - Healthcare Buildings Olsson Associates

Building Mechanical Engineer Kiewit Corp

Project Mechanical Engineer - HVAC Design Olsson Associates

Mechanical Design Engineer - Industrial Facilities 1 Kiewit Corp

Mechanical Engineer - Healthcare Buildings Olsson

Senior Mechanical Engineer Actalent Inc

lead-mechanical-engineer-power-multiple-locations Burns & McDonnell

Mid-Level Mechanical Engineer - Kiewit Power Engineering Kiewit Corp

Mid-Level Mechanical Engineer (Generation) WSP Global Inc

Senior Process Mechanical Engineer, Power AtkinsRealis Group Inc

Mechanical Engineer II - Missouri Institute for Defense and Energy University of Missouri

Sr Mechanical Engineer Actalent Inc

Mechanical Engineer Actalent Inc

Associate Mechanical Engineer - Federal Engineering and Design Team Olsson Associates

Mechanical Engineer I Affiliated Engineers, Inc.

senior-mechanical-engineer-nuclear-multiple-locations Burns & McDonnell

Senior Mechanical Engineer - Industrial Facilities Kiewit Corp

Senior Mechanical Engineer - Data Center (Remote) Olsson

Senior Mechanical Engineer - HVAC Design Olsson Associates

mechanical-engineer-power-multiple-locations Burns & McDonnell

staff-mechanical-engineer-mission-critical-kansas-city Burns & McDonnell

staff-mechanical-engineer-mission-critical Burns & McDonnell

staff-mechanical-engineer-pipeline-facilities-kansas-city Burns & McDonnell

mechanical-engineer-commercial-architecture-kansas-city Burns & McDonnell

Mechanical Engineer II ORAU

Mechanical Engineer (Generation) WSP Global Inc

Lead Mechanical Engineer - Battery Blue Origin Enterprises LP

Mechanical Engineer (Contractor) Vantage MedTech

Mechanical Engineer – building design/HVAC/plumbing 1st St. NW Technical Staffing

Senior Mechanical Engineer - Aviation Garmin International

Senior Mechanical Engineer Garmin International

Mechanical Engineer 1 Garmin International

Mechanical Engineer 2 - Aviation Garmin International

Technical Lead Mechanical Engineer - Fitness Products Garmin International

Similar Job Searches