M&S Software Engineer DCS CorporationM&S Software EngineerAlbuquerque, NMAs a member of our team, you will support defense technologies along with research and development in Albuquerque, NM, having opportunities to work in a dynamic environment, with state-of-the-art simulation technologies, simulation integration experts, and experienced military Subject Matter Experts (SMEs). Our work focuses on conducting capability assessments for emerging military technologies and ensuring related tools and methodologies are suitable to inform Department of Defense (DoD) decision makers.
Mechanical Engineer StratAcuity Staffing Partners IncMechanical EngineerAlbuquerque, NM$55–$65 / hourIn terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Everforth Apex also offers a HSA (Health Savings Account on the HDHP plan), a SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions, a corporate discount savings program and other discounts.
Mechanical Engineer CACIMechanical EngineerAlbuquerque, New MexicoPay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. - Experienced in developmental and qualification testing to include providing input to test plans and procedures, conducting testing evolutions and correcting deficiencies.
Senior Mechanical Engineer - 3D Facility Characterization Red Gate Group LtdSenior Mechanical Engineer - 3D Facility CharacterizationAlbuquerque, NMPredictive Tool Familiarity: Strong working knowledge of how structural volume data and internal facility layouts constrain DoD hazard prediction toolsets, specifically Hazard Prediction and Assessment Capability (HPAC) and Vapor, Liquid, and Solid Tracking (VLSTRACK). Education: Bachelor's degree in Mechanical Engineering, Civil/Structural Engineering (with heavy structural dynamics/geo-mechanical focus), Aerospace Engineering, or a highly relevant STEM discipline; Master's degree or Doctorate (Ph.
Mechanical Engineer TechStaff, IncMechanical EngineerAlbuquerque, NMIn this position, the ideal candidate performs conceptual design through construction administration and post-occupancy, coordinating with multiple disciplines and as Mechanical Engineer, ensuring projects are delivered within budget and on schedule. Our client is one of the top 100 Mechanical, Electrical, Plumbing and Technology Consulting Engineering firms in the nation with a reputation for superb design services.
NewMechanical Engineer – Fort Hood Accura EngineeringMechanical Engineer – Fort HoodAlbuquerque, New MexicoMechanical Engineer- Fort Hood ***Work Location: Fort Hood, TX*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Position Summary The Mechanical Engineer will provide engineering and commissioning support for federal construction projects at Fort Hood, Texas. The selected candidate will be responsible for reviewing technical aspects of design and construction activities, evaluating mechanical systems, supporting commissioning efforts, reviewing project documentation, and ensuring compliance with contract requirements, codes, and project objectives throughout all phases of construction.
Mechanical Engineer (Willing to Consider All Mid to Sr. Levels) Mechanical Engineer Redwire SpaceMechanical Engineer (Willing to Consider All Mid to Sr. Levels) Mechanical EngineerAlbuquerque, New MexicoTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Loadpath, LLC part of the Redwire Space Missions team in Albuquerque, NM has a current opportunity for a Mechanical Engineer (willing to consider all mid to senior levels) to join our advanced design team located at our facility in Albuquerque, NM .
Mechanical Engineer (Willing to Consider All Mid to Sr. Levels) Mechanical Engineer Redwire CorpMechanical Engineer (Willing to Consider All Mid to Sr. Levels) Mechanical EngineerAlbuquerque, NMTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Education: Bachelor's degree from an accredited university, with 5 or more years of related work experience in Aerospace, Space, Energy, Semiconductor, Subsea, or other high reliability industries.
Mechanical Engineer Stantec IncMechanical EngineerAlbuquerque, NMWork with a team of design colleagues to conceptualize and develop full documentation for new construction and renovation projects for multiple types of facilities such as advanced technologies, industrial, healthcare, mission critical, higher education, research laboratories or similar applications. Primary Location: United States | NM | Albuquerque Organization: BC-2358 Buildings-US Acquisition PSP Mountain BE Employee Status: Regular Business Justification: New Position Travel: No Schedule: Full time Job Posting: 30/03/2026 07:03:35 Req ID: 1005129.
Mechanical Engineer NV5Mechanical EngineerAlbuquerque, New MexicoOverview: NV5 is a provider of engineering and consulting services to public and private sector clients, delivering solutions through six business verticals: Testing, Inspection & Consulting; Infrastructure; Utility Services; Environmental Health Sciences; Buildings & Program Management; and Geospatial Technology. Demonstrated experience in the design of commercial, industrial, educational, and governmental buildings, small industrial plants and warehouses, central chilled water and heating plants.
Mechanical Engineer CACI International IncMechanical EngineerAlbuquerque, NM$60,100–$123,200 / yearPay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Job Title: Mechanical Engineer Job Category: Engineering Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type: Regular Percentage of Travel Required: Up to 25% Type of Travel: Continental US.
NewSenior Mechanical Engineer - 3D Facility Characterization Red Gate GroupSenior Mechanical Engineer - 3D Facility CharacterizationAlbuquerque, NMPreferred ExperienceHands‑on experience preparing 3D facility geometries for high‑rate physics solvers such as LS‑DYNA, ANSYS Autodyn, or CTH.Experience with terrestrial laser scanners, mobile mapping systems, or robotic platforms for GPS‑denied underground mapping. You will utilize advanced geospatial imaging, LiDAR, and computer‑aided engineering (CAE) to reconstruct complex subterranean environments into high‑fidelity 3D CAD geometries for blast‑effects modeling and hazard predictions.
Mechanical Engineer - Cheyenne, WY Accura EngineeringMechanical Engineer - Cheyenne, WYAlbuquerque, New MexicoWarren AFB (Cheyenne, WY) *** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities : Candidate will provide engineering services on several simultaneous federal projects ranging in value up from tens of millions to hundreds of millions of dollars in construction value. Emphasis is placed on knowledge and experience with but not limited to HVAC systems, system controls, building automation, chilled water, plumbing, humidification, data centers, and other complex mechanical-engineering related elements found in large and complex buildings and utility plants.
Mechanical Engineer IV-HVAC Professional Project Services IncMechanical Engineer IV-HVACAlbuquerque, NMPrinciple Areas of Responsibility: HVAC - in developing process flow diagrams, and sequences of operations; selection and layout of mechanical equipment and associated piping systems; and developing mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls, etc.
Senior Mechanical Engineer - 3D Facility Characterization & Weapons Effects Analysis Noblis IncSenior Mechanical Engineer - 3D Facility Characterization & Weapons Effects AnalysisAlbuquerque, NM$144,720–$226,195 / yearCompensation at Noblis is determined by various factors, including but not limited to, the combination of education, certifications, knowledge, skills, competencies, and experience, internal and external equity, location, clearance level, as well as contract-specific affordability, organizational requirements and applicable employment laws. This position requires deep technical expertise across structural mechanics, blast dynamics, and weapons-target interaction, as well as the ability to collaborate with multidisciplinary teams in a fast-paced, mission-driven environment supporting national security objectives.
Senior Mechanical Engineer – 3D Facility Characterization & Weapons Effects Analysis NoblisSenior Mechanical Engineer – 3D Facility Characterization & Weapons Effects AnalysisAlbuquerque, New Mexico$144,720–$226,195 / yearFull timeCompensation at Noblis is determined by various factors, including but not limited to, the combination of education, certifications, knowledge, skills, competencies, and experience, internal and external equity, location, clearance level, as well as contract-specific affordability, organizational requirements and applicable employment laws. This position requires deep technical expertise across structural mechanics, blast dynamics, and weapons-target interaction, as well as the ability to collaborate with multidisciplinary teams in a fast-paced, mission-driven environment supporting national security objectives.
Infrastructure Mechanical Engineer Pacific FusionInfrastructure Mechanical EngineerAlbuquerque, New MexicoWe are rapidly designing and building a pulser-driven inertial fusion system to achieve net facility gain (more fusion energy output than stored energy input). We are united by a shared sense of urgency to provide clean power for the world, particularly managing climate change while meeting growing global energy demand.
Mechanical Engineer Booz Allen HamiltonMechanical EngineerAlbuquerque, New MexicoOnsite : If this position is listed as onsite, work will primarily be performed at a Booz Allen office or customer facility, where employees will collaborate directly with colleagues and customers as required by the role. Salary at Booz Allen is determined by various factors, including but not limited to location, the individual’s particular combination of education, knowledge, skills, competencies, and experience, as well as contract-specific affordability and organizational requirements.
senior-mechanical-engineer-aviation-federal-albuquerque Burns & McDonnellsenior-mechanical-engineer-aviation-federal-albuquerqueAlbuquerque, NMDescription The Senior Mechanical Engineer will lead mechanical design project teams in Albuquerque, NM to create world-class designs for new projects, alterations and redevelopments on a variety of projects that will primarily support the local Department of Energy (DOE) complexes. It is anticipated that they will have direct contact with our local clients in managing discipline-specific work under Basic Ordering Agreements (BOAs) and large Federal budget line-item projects.
Senior Mechanical Engineer Stantec IncSenior Mechanical EngineerAlbuquerque, NMWe are seeking a highly skilled Senior Mechanical Engineer to lead HVAC system design-including airside, hydronic, and steam systems-across a diverse portfolio of multidisciplinary (A&E) projects. This role will support major market sectors such as Mission Critical, Healthcare, Utility Plants and Campus Distribution, Corporate/Commercial, and Laboratories.
Mechanical Project Engineer Wilson & CompanyMechanical Project EngineerAlbuquerque, New MexicoIf you are a self-motivated professional who is looking to take on more responsibility in leading projects related to MEP building design, while seeking an employer that will focus on your specific career goals delivering high-quality professional services, then we encourage you to strongly consider this position. Coordination of communications between the project team, the engineering and design team members to assure quality of work, and that consistent technical content drawing/design packages are maintained throughout a project.
Mechanical Facilities HVAC Design Engineer Merrick & CoMechanical Facilities HVAC Design EngineerAlbuquerque, NMAir-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). Project work will encompass: Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations.
NewSr. Mechanical Integration Engineer - Space Technologies AeroVironment IncSr. Mechanical Integration Engineer - Space TechnologiesAlbuquerque, NM$91,000–$138,750 / yearThey also collaborate with lead Mechanical engineers, Technical leads and Procurement personnel to finalize drawings, work with Machine shops on technical questions and define inspection plans for critical parts. In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction.
NewMechanical Engineer - Space Technologies AeroVironment IncMechanical Engineer - Space TechnologiesAlbuquerque, NM$91,000–$138,750 / year5 years' mechanical engineering experience in one or more of the following areas: Structural and thermal analysis including analytical calculations and FEA (stress analysis, modal analysis, thermal conduction analysis, bolt loads, etc.). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction.
NewSr. Mechanical Engineer - Space Technologies AeroVironment IncSr. Mechanical Engineer - Space TechnologiesAlbuquerque, NM$111,500–$170,000 / year12 years' mechanical engineering experience in one or more of the following areas: Structural and thermal analysis including analytical calculations and FEA (stress analysis, modal analysis, thermal conduction analysis, bolt loads, etc.). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction.
Mechanical Engineer NV5 Global IncMechanical EngineerAlbuquerque, NMNV5 is a provider of engineering and consulting services to public and private sector clients, delivering solutions through six business verticals: Testing, Inspection & Consulting; Infrastructure; Utility Services; Environmental Health Sciences; Buildings & Program Management; and Geospatial Technology. Demonstrated experience in the design of commercial, industrial, educational, and governmental buildings, small industrial plants and warehouses, central chilled water and heating plants.
Propulsion Engineer (will consider all Sr. levels) (Mechanical Engineer) Redwire CorpPropulsion Engineer (will consider all Sr. levels) (Mechanical Engineer)Albuquerque, NMRedwire Space Missions LLC, has an exciting opportunity for a Propulsion Engineer (will consider all senior levels), responsible for the definition, integration, and technical oversight of spacecraft propulsion subsystems supporting maneuvering, station-keeping, and end-of-life disposal across Space Missions programs. Experience with performance modeling (CEA-equilibrium for chemical, EP thruster curve fits), duty cycles, life models, thermal/structural margins, and fault detection, isolation, and recovery (FDIR) strategies for autonomous operations.
Mechanical Facilities HVAC Design Engineer Merrick & CompanyMechanical Facilities HVAC Design EngineerAlbuquerque, New MexicoFull timeAir-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). Project work will encompass: Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations.
Electro-Mechanical Technician Leidos Holdings IncElectro-Mechanical TechnicianAlbuquerque, NM$48,100–$86,950 / yearSolutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Senior Mechanical Equipment Designer Merrick & CoSenior Mechanical Equipment DesignerAlbuquerque, NMDetailed design activities include preparation of component, subassembly, and main assembly Creo (Pro/E) models; creating detailed fabrication drawing packages; evaluating and selecting purchased components; creating detailed Bills of Materials and completing equipment datasheets. Typical equipment includes containment systems (gloveboxes, hot cells, cleanrooms), material handling equipment, small scale process piping & equipment, furnace systems, metal working systems (mills, lathes, rolling machines) and pressure vessels.
Mechanical Equipment Designer II Merrick & CoMechanical Equipment Designer IIAlbuquerque, NMDetailed design activities include preparation of component, subassembly, and main assembly Creo (Pro/E) models; creating detailed fabrication drawing packages; evaluating and selecting purchased components; creating detailed Bills of Materials and completing equipment datasheets. Typical equipment includes containment systems (gloveboxes, hot cells, cleanrooms), material handling equipment, small scale process piping & equipment, furnace systems, metal working systems (mills, lathes, rolling machines) and pressure vessels.
NewAssociate Mechanical Designer - Space Technologies AeroVironment IncAssociate Mechanical Designer - Space TechnologiesAlbuquerque, NM$60,500–$92,500 / yearIn order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. This role will focus on capturing technical data into our Product Lifecycle Management (PLM) system, preparing drawings, and assisting with mechanical model design and assembly drawings using SolidWorks.
Experienced Mechanical Designer Wilson & CompanyExperienced Mechanical DesignerAlbuquerque, New MexicoWilson & Company is currently seeking an experienced Mechanical Designer to assist our mechanical engineering and design team with a focus in heating, ventilation, air-conditioning (HVAC) and plumbing systems for commercial, institutional, governmental, and educational facilities. Guided by our purpose, we help clients move from concept to completion, transforming unused spaces into productive places, underutilized facilities into efficient ones, and rural or urban challenges into achievable solutions.
Electro-Mechanical Technician LeidosElectro-Mechanical TechnicianAlbuquerque, New MexicoJune 9, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support.
Mechanical Assembly Technician Ground ForceMechanical Assembly TechnicianAlbuquerque, NMFull timeThis work will include, but may not be limited to assembling and installing components and subassemblies onto equipment being manufactured using a variety of methods and techniques such as drilling, tapping, punching, machining, wiring, low-voltage electrical, hydraulic plumbing (hard line and hose) and testing of the equipment according to design specifications. SKILLS – ability to perform specific technical tasks using normal tools used in equipment assembly such as the layout / termination / connection of wiring and plumbing, lay-out and installation of mechanical equipment and performing operational testing (and repair modification if required) of completed assemblies.
Mechanical Designer Wilson & CompanyMechanical DesignerAlbuquerque, New MexicoGuided by our purpose, we help clients move from concept to completion, transforming unused spaces into productive places, underutilized facilities into efficient ones, and rural or urban challenges into achievable solutions. With employees across multiple offices in the Midwest, Southwest, Rocky Mountain, and Western regions in the United States, we bring people together to practice their craft, create value, and accomplish great things.
Electro Mechanical Technologist Actalent IncElectro Mechanical TechnologistLos Lunas, NM$79,000–$115,000 / yearThe workplace brings together a world-class team of scientists, engineers, technicians, and operators from fusion, hard-tech, and advanced manufacturing fields, all united by a mission to deliver clean power to the world and address the dual challenges of climate change and rising global energy demand. You will work around automated manufacturing lines, fusion system components, and a variety of electromechanical equipment, including machine shop tools such as lathes, mills, CNC machines, and drill presses, as well as hand tools and power tools.
Mechanical Designers & Checkers-Kiewit Nuclear Solutions-Multiple Locations Kiewit CorpMechanical Designers & Checkers-Kiewit Nuclear Solutions-Multiple LocationsNM$88,000–$92,000 / yearOur staff collaborates with Kiewit's vast internal network of resources that span heavy civil and infrastructure, vertical and commercial buildings, industrial, as well our oil and gas and power generation markets, to drive safe and cost-effective solutions that achieve client expectations and further Kiewit's core values of People, Integrity, Excellence, and Stewardship. Design piping systems and generate isometric drawings for systems typical industrial facilities and power generation facilities, but not limited to, process steam, process water, drains, and general plant/facility water, compressed air, and gas systems, condensate, blowdown, circulating water, cooling and chilled water, and underground piping utilities.
Electro-Mechanical Build Technician Pacific FusionElectro-Mechanical Build TechnicianLos Lunas, New MexicoAs an Electro-Mechanical Build Technician , you will play a crucial role in supporting our engineering and delivery teams in setting up automated manufacturing lines and in the assembly, testing, and validation of electrical and mechanical components integral to our fusion energy systems. We are rapidly designing and building a pulser-driven inertial fusion system to achieve net facility gain (more fusion energy output than stored energy input).
Laser/Optics/Mechanical Lab Technician (Associate, Mid-Level or Senior) BoeingLaser/Optics/Mechanical Lab Technician (Associate, Mid-Level or Senior)Albuquerque, New MexicoThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The Boeing Company Boeing Defense, Space and Security (BDS) is looking for an Associate, Mid-Level, or Senior Laser/Optics/Mechanical Lab Technician (Level 2, 3, 4) to join our team at the Starfire Optical Range on Kirtland AFB in Albuquerque, New Mexico.
Senior & Lead Transmission Line Engineers Leidos Holdings IncSenior & Lead Transmission Line EngineersAlbuquerque, NMRemote$73,450–$132,775 / yearLead Level: Bachelors degree in civil or mechanical engineering with a minimum of eight (8) + years of relevant experience in the design of electric utility transmission systems This experience must include a minimum of two (2) + years of demonstrated leadership, mentorship, or supervisory experience over project teams and/or junior staff. We are seeking Senior & Lead Transmission Line Engineers (multiple positions) who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission.
Senior Instrumentation and Controls Engineer Stantec IncSenior Instrumentation and Controls EngineerAlbuquerque, NMPrimary Location: United States | AZ | Chandler Organization: BC-2243 Water-US Delivery Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 16/06/2025 05:06:49 Req ID: REQ25000194. Bachelor of Science in Electrical Engineering, Mechanical Engineering, or Chemical Engineering is required, MS preferred, with a minimum of 15 years of experience in instrumentation and controls.
Senior Civil Engineer/Project Manager - Public Works Huitt-Zollars IncSenior Civil Engineer/Project Manager - Public WorksRIO RANCHO, NMAny unsolicited third-party resumes forwarded by recruiters to any Huitt-Zollars hiring manager or employee will be considered public information, may be treated as a direct application from the person identified in the resume, and will not be eligible for placement fee payment to the agency submitting the unsolicited resume. The individual will also be coordinating with and providing direction to engineers-in-training, CADD technicians, and project support staff to prepare the project documents (drawings and technical specifications) for permitting and bidding.
Senior Structural Mechanics Integration Engineer The Aerospace CorpSenior Structural Mechanics Integration EngineerAlbuquerque, NM$151,300–$226,900 / yearComprised primarily of highly trained mechanical and aerospace engineers, VSD provides national expertise in the areas of vehicle engineering; guidance, navigation, and controls; robotics; electro-mechanical devices; embedded systems; fluid mechanics; propulsion; thermal control; orbital mechanics; mechanisms; structures; structural dynamics; and dynamic environments. As a Senior Structural Mechanics Integration Engineer (Senior Project Engineer - Aeronautical and Aerospace Structural Engineering) in the Structural Mechanics Integration Office, you will join a team of engineers, working across our Structural Mechanics Subdivision and programs, to develop multi-disciplinary solutions to the hardest structural mechanics related problems in the industry.
Senior Engineer, Reactor Vessel Kairos Power LLCSenior Engineer, Reactor VesselAlbuquerque, NM$140,600–$165,400 / yearEngage with manufacturing, assembly, suppliers, and operations teams to support reactor vessel fabrication, inspection, installation, testing, and maintenance, including review of fabrication drawings, manufacturing processes, inspection plans, material certifications, and nonconformance dispositions. You will work closely with adjacent reactor system teams to mature reactor vessel design requirements, resolve technical and spatial interfaces, support design trades, and deliver hardware that meets safety, performance, manufacturability, inspection, and maintainability objectives.
Senior Process Engineer Stantec IncSenior Process EngineerAlbuquerque, NMThe engineering design focus will include the following areas of focus: process systems, process-mechanical, Bulk Gas delivery and UHP (VHP/Gas/Chemical), Industrial Waste lift, collection and treatment, and UPW (make-up, primary, and polish loop) systems for multiple ongoing projects through all phases including programming, schematic, design development, constructions documents, construction administration and project close-out. Build our team by recruiting, mentoring, assisting project teams; Champion technical growth in our engineering teams; Assist in developing business plans to assist strategic growth forecast, progressively building year upon year; Champion growth in the Industrial market in the US western region, Ability and willingness for occasional travel to domestic sites.
associate-water-resources-engineer-mining-multiple-locations Burns & McDonnellassociate-water-resources-engineer-mining-multiple-locationsAlbuquerque, NMThe successful candidate will support mining clients across the full project lifecycle, from planning and permitting through construction, operations, and closure, while working closely with engineering, construction, and environmental teams to deliver integrated, fit-for-purpose solutions. This is an opportunity to influence both technical outcomes and business success as a senior technical leader in a collaborative, employee-owned culture where you will have the platform to mentor talent, shape best practices and strengthen Burns & McDonnell's growing mine water management capabilities.
NewSenior Mine Water Engineer - Strategy & Delivery Burns & McDonnellSenior Mine Water Engineer - Strategy & DeliveryAlbuquerque, NMQualificationsBachelor's degree in civil, environmental, chemical, mechanical engineering, or a related field from an accredited program.13+ years of progressive experience in mine water management, water resources, hydrogeology, or a closely related field with direct application to mining projects. Master's degree in a relevant discipline (preferred).Professional licensure (PE, PG) or ability to obtain one (preferred).Experience in mine permitting, operations, closure, and reclamation from a water‑management perspective.
Principal Engineer, Heat Transport System Kairos Power LLCPrincipal Engineer, Heat Transport SystemAlbuquerque, NMRemote$175,000–$218,000 / yearDesign and deploy the Nuclear Heat Recovery Steam Generator (NHRSG), focusing on molten salt steam generators, salt pumps, valves, and related auxiliary systems that meet Kairos Power's FHR deployment objectives. We are seeking an experienced Principal or Distinguished Engineer to lead the technical deployment of KP-FHR heat transport system equipment, including integration of commercial molten salt steam generators, salt pumps, valves, and associated equipment.
NewSenior Controls Engineer albuquerque nm ESR HealthcareSenior Controls Engineer albuquerque nmAlbuquerque, NM$121,000–$130,000 / yearThe Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.).This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures and associated budgets, task prioritization and scheduling, task ordering, time tracking and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Senior Controls Engineer - Albuquerque, NMExperience level: Mid-senior Experience required: 10 Years Education level: Bachelor's degree Job function: Engineering Industry: Industrial Automation Compensation: $121,000 - $130,000 Total position: 1 Relocation assistance: No Visa sponsorship eligibility: No JOB DESCRIPTION:We have a Controls Engineer position available in our Albuquerque, NM office.