OTHER

FEED

UNKNOWN

This role supports safe, reliable equipment operation and accurate product measurement across truck loading/offloading racks, LACT units, tank gauging systems, and associated equipment. Overview: The E&I Technician is responsible for maintaining, troubleshooting, repairing, and commissioning electrical, instrumentation, and control systems supporting pipeline and terminal operations.

Danos, LLC

I&E Technician

[AW]-iCims

Company: Safran Seats Job field: Testing Location: Gainesville, Texas, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Technician Salary range: based on experience ITAR: ITAR Controlled position. With more than one million seats installed across the fleets of the worlds leading airlines, Safran Seats is one of the global leaders in passenger, crew, aircraft and helicopter seating, delivering innovative, high value-added solutions.

Safran SA

Test Technician

linkup_via_bold

HOUR

Must Have: Perform inspection functions including electrical function test, visual and dimensional checks to raw castings, switch-racks, and work in progress utilizing gauges, multiple types of measuring instruments. Lead and coordinate efforts and perform First Article inspection, incoming/receiving and final inspection of parts and routine/daily process audits.

Artech LLC

Electrical Assurance Technician

jobdiva

Sample Preparation, Sample Cataloging: Participates in sample processing by retrieving samples, ordering appropriate testing in TVMDL’s laboratory information management system (LIMS), ensuring samples are fit for purpose of test, and distributing samples to appropriate analytical station and/or personnel. Administrative Roles: Files and scans relevant paperwork into internal document management system as needed (including, but not limited to: worksheets, forms, accession forms, regulatory forms, quality assurance and safety documentation, equipment maintenance forms, and logbooks).

Texas A&M Veterinary Medical Diagnostic Laboratory

Diagnostic Technician - Analytical Chemistry

sourcestack_via_bold

A UPS technician may also encounter problems during startups that will require the use of hand tool and power tools to disassemble and reassemble a UPS module, battery cabinet (ESS) or any other piece of equipment with a problem. Upon completion of all UPS product training, a UPS Field Service Technician should be able to perform the following assignments: Perform Startup of new UPS equipment and peripherals at customer’s sites.

Toshiba International

UPS Field Service Technician I

The company's products include ware washing equipment; cooking equipment, including ovens, ranges, and broilers; refrigeration equipment, including refrigerators, freezers, and prep tables; food processing equipment, including slicers, mixers, and scales; and kitchen exhaust, ventilation, and pollution control systems. Compiles and summarizes data for supervisor and/or branch manager that will help him/her with creating customer-focused strategies for fostering relationships and sales (e.g., equipment leads, contract leads, water treatment order leads).

Illinois Tool Works Inc

Service Technician I

The Quality Technician will be responsible for guiding production teams to properly disposition parts as good for use, need repair, or scrap, while documenting and communicating identified defects, with accountability for escalating unresolved concerns to the quality engineering team and direct manager. Communicates test results, ideas, and problems to supervisor and engineers; able to be part of the solution, with strong verbal and written communication skills in English, the ability to build solid relationships with several teams in multiple departments, and personable effectiveness in a fast-paced team environment.

Tesla Inc

Quality Technician, Megafactory (Day Shift)

Assist in the identification and resolution of manufacturing quality issues, contain parts or products as needed, sort parts for quality requirements as well as analyze and interpret high failure product data independently, effectively escalating/root causing fall-out alongside line Quality Technicians. Train, coordinate, and delegate activities of the Quality Technicians as well as leading group discussions online, providing support and guidance to line Quality Technicians while giving visibility to Process, Production, and Manufacturing Engineers.

Lead Quality Technician, Data Center Manufacturing

The statement of work includes a variety of activities that support the FAA’s Capital Investment Plan (CIP) and certain reimbursable programs, the FAA NextGen Program, national security programs and aviation safety. Specifically, work includes site selection and engineering, construction, environmental and fire/life safety, equipment installation and testing, drafting, contract surveillance, and other technical services as required.

Parsons is a technology-driven engineering services firm with more than 70 years of experience in the engineering, construction, technical, and professional services industries. The corporation is a leader in many diversified markets with a focus on infrastructure, defense, security, and construction. Parsons delivers design/design-build, program/construction management, systems design/engineering, cyber/converged security, and other professional services packaged in innovative alternative delivery methods to federal, regional, and local government agencies, as well as to private industrial customers worldwide.

Parsons

Sca-Electronics Technicians Ii, Faa

ADAPTED_NOW

Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. The Lead Core Cutting Technician is a senior operational role responsible for overseeing and performing the advanced setup, operation, and maintenance of automated equipment used to process grain-oriented electrical steel (CRGO) into precision laminations for power transformer cores.

Sanmina

Lead Core Cutting Technician - (108556)

Sanmina Jobs

Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors. Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal.

Ryder System Inc

Diesel Reefer Technician Mobile

Lead Core Cutting Technician - (108557)

We are seeking an experienced Instrumentation & Controls (I&C) Technician to support the maintenance, calibration, troubleshooting, and reliability of instrumentation and control systems at a major LNG facility. We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.

First Tek, Inc.

I&C Technician IV - LNG Facility

What you can look forward to as a Field Service Technician: Serve as a technical field resource to internal ZF teams, OEMs, dealers, distributors, and fleet customers and address call center escalations as a Level 2 technical support resource. Review the biweekly unit-down list with the call center to proactively identify and resolve field issues and escalate unresolved product concerns to engineering with clearly documented data and root cause observations.

Field Service Technician

ea_via_bold

Engineering Technician III

FULL_TIME

Two (2) years full-time Invasive Cardiovascular Technology experience with One of the following: o An Associate Degree or equivalent college hours (62 semester hours) in health, science, natural science, nursing, engineering, or any primary science or higher AND one (1) year (full-time or full-time equivalent) in Invasive Cardiovascular Technology. In both roles he/she demonstrates technical proficiency in all Cardiac Cath Lab procedures and equipment; applies anatomical and physiological knowledge to proficiently assist the Cardiologist or Electrophysiologist with providing cardiac patient care.

Strength in Numbers 

United Surgical Partners International (USPI) and Tenet have combined forces to create the nation’s largest ambulatory surgery provider. Our combined network of exceptional surgical and imaging facilities includes approximately 20 imaging centers, and over 265 short-stay surgical facilities. Together, our partnerships include 50 health systems and more than 4,000 physicians. Nationwide Experience 

Our partners deliver high quality ambulatory solutions in safe, efficient and caring USPI facilities in communities of every size across 29 states. Our physician partners are focused on providing quality patient care, in part because they are invested in their USPI facility. We provide the infrastructure and support they need to perform their best. This is one of the advantages of partnering with USPI. Quality Patient Services 

We share a vision with our physician and health system partners. Our goal is to provide the quality of healthcare services we would insist upon for our own families. Since our founding in 1998, this goal has helped us grow exponentially. Today, our strategic joint venture with Tenet establishes USPI as one of the nation's leading providers of ambulatory solutions. Operating Excellence 

Our size and experience in developing and operating ambulatory facilities and strategic vision allow our facilities to achieve both high patient satisfaction and solid financial results. Moreover, because we engage physicians in the governance and growth of the facility, we also achieve excellent clinical outcomes.

United Surgical Partners International Inc (USPI)

Cath Lab Technician PRN

silkroad ATS feed

POSITION SUMMARY: The Corrosion Technician responsibilities include but are not limited to gathering annual pipe-to-soil survey data; gathering rectifier readings and troubleshooting rectifier units; performing interference testing; and designing, overseeing installation of, and developing as-built drawings for cathodic protection facilities. Knowledge of common pipeline corrosion control related equipment, such as line locators, digital multi-meter, soil-resistivity kit, CSE half cells, and data collectors.

Targa Resources Corp

Corrosion Technician

Quality Technician, Megafactory (Night Shift)

Join a stable, family‑owned plastics manufacturer with over 50 years of success, including a new, state‑of‑the‑art Fort Worth facility. Many experienced technicians grow into senior technician, setup‑focused, training, or maintenance‑adjacent roles.

Flexcraft LLC

Process Technician - Plastics Manufacturing (Injection)

Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. The Lead Core Stacking Technician is a senior operational role responsible for overseeing and performing the advanced assembly of transformer core structures using precision-cut laminations in accordance with engineering drawings and build specifications.

Measurement Technician Jobs in Texas

I&E Technician Danos, LLC

Test Technician Safran SA

Electrical Assurance Technician Artech LLC

Diagnostic Technician - Analytical Chemistry Texas A&M Veterinary Medical Diagnostic Laboratory

UPS Field Service Technician I Toshiba International

Service Technician I Illinois Tool Works Inc

Quality Technician, Megafactory (Day Shift) Tesla Inc

Lead Quality Technician, Data Center Manufacturing Tesla Inc

Sca-Electronics Technicians Ii, Faa Parsons

Lead Core Cutting Technician - (108556) Sanmina

Diesel Reefer Technician Mobile Ryder System Inc

Lead Core Cutting Technician - (108557) Sanmina

I&C Technician IV - LNG Facility First Tek, Inc.

Field Service Technician ZF

Engineering Technician III Parsons

Cath Lab Technician PRN United Surgical Partners International Inc (USPI)

Corrosion Technician Targa Resources Corp

Quality Technician, Megafactory (Night Shift) Tesla Inc

Process Technician - Plastics Manufacturing (Injection) Flexcraft LLC

LEAD CORE STACKING TECHNICIAN - (108570) Sanmina

Similar Job Searches

Stand out to leading employers.