NewProduct Application Engineer OP MobilityProduct Application EngineerTroy, MIToday, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions. We are committed to building inclusive teams, promoting diversity and equality, and ensuring that every application is considered fairly - because the future of mobility is built by diverse perspectives, bold ideas, and people who dare to move forward.
NewQuality Engineer STS Technical ServicesQuality EngineerWarren, MISupport quality initiatives across areas including design, incoming materials, process control, product evaluation, reliability, inventory control, metrology, automated testing, software, research and development, and administrative functions. This role supports continuous improvement by identifying risks, analyzing data, and implementing solutions that protect quality and performance.
NewStructural CAE Engineer (ABAQUS & HyperMesh) HTC Global Services IncStructural CAE Engineer (ABAQUS & HyperMesh)Dearborn, MIFull timeJob Title Structural CAE Engineer (ABAQUS HyperMesh) Overview We are seeking an experienced Structural CAE Engineer to support the structural design and analysis of high-voltage battery systems using advanced CAE tools. The ideal candidate will collaborate with battery design teams to develop, analyze, and validate structural...
NewApplications Engineer Amphenol Borisch TechnologiesApplications EngineerGrand Rapids, MIApplications Engineering acts as the bridge between our customers' visions and our internal expertise, transforming ideas into reality while championing the capabilities of our design and manufacturing teams; including research and procurement of technology supporting operational excellence. Amphenol Borisch Technologies (ABT), a division of Amphenol Corporation, is an industry leader in providing high-reliability electronic systems for Aerospace and Defense companies across the globe.
Senior Plastic Process Engineer Vaco LLCSenior Plastic Process EngineerNovi, MI$100,000–$120,000 / yearDetermining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual’s skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. Determining compensation for this role (and others) at Vaco/Highspring depends upon a wide array of factors including but not limited to the individual’s skill sets, experience and training, licensure and certifications, office location and other geographic considerations, as well as other business and organizational needs.
NewChief Engineer - Commercial Laundry Linen Service Plant Gables Search GroupChief Engineer - Commercial Laundry Linen Service PlantSouthgate, MI$120,000–$150,000Job Summary: The Chief Engineer has overall responsibility for the daily repair and preventative maintenance of industrial textile processing equipment and facility maintenance and guides the maintenance team by providing training, direction and leadership. Develop and implement computerized methods, control systems and procedures to ensure a fully operational and productive preventive maintenance program, parts stockroom and inventory system.
NewElectrical Controls Engineer Gables Search GroupElectrical Controls EngineerRomeo, MIProjects often involve injection mold press tending, automated component feeding and assembly, laser marking, and vision inspection. Identify and implement appropriate new technology, controls and automation to maintain a competitive advantage in the market.
NewManufacturing Engineer - Grand Rapids, MI Amphenol Borisch TechnologiesManufacturing Engineer - Grand Rapids, MIGrand Rapids, MIAmphenol Borisch Technologies (ABT), a division of Amphenol Corporation, is an industry leader in providing high-reliability electronic systems for Aerospace and Defense companies across the globe. The Manufacturing Engineer is responsible to develop and drive quality-driven manufacturing systems, processes and equipment for the production of new and existing cable harness assemblies.
Senior Materials Engineer - Metals Rivian Automotive IncSenior Materials Engineer - MetalsPlymouth, MI$98,500–$123,100 / yearDefine material requirements, specifications, validation plans, and acceptance criteria for components, assemblies, and manufacturing processes involving metals Partner with design, CAE, manufacturing, quality, corrosion, durability, purchasing, and supplier development teams to ensure material performance targets are achieved Drive failure analysis and root cause investigations related to mechanical properties, microstructure, corrosion, coating performance, heat treatment, joining, and forming of metallic components. Strong metallurgical background in steels, including phase transformations, heat treatment, hardenability, microstructure-property relationships, weldability, coatings, corrosion mechanisms, and failure modes Working knowledge of aluminum and other light-metal systems including casting, extrusion, sheet, forming, joining, and corrosion considerations Experience supporting end-to-end product development.
NewChassis Materials Engineer GMChassis Materials EngineerWarren, MichiganThe Chassis Materials Engineer will apply a strong metallurgy and materials engineering background to specify materials used in vehicle design, with a focus on gears, driveline systems, axles, prop shafts, and related components. Research, study and test new material combinations to reduce cost and weight and improve strength at the same time they take ensure the combinations can be joint, either welded or through dispense and that the process will be reliable and repeatable.
NewChassis Materials Engineer General Motors CoChassis Materials EngineerWarren, MIThe Role: The Chassis Materials Engineer will apply a strong metallurgy and materials engineering background to specify materials used in vehicle design, with a focus on gears, driveline systems, axles, prop shafts, and related components. Research, study and test new material combinations to reduce cost and weight and improve strength at the same time they take ensure the combinations can be joint, either welded or through dispense and that the process will be reliable and repeatable.
Core Technical Engineer \u2013 Chassis \u0026 Underhood Materials Engineer Stellantis NVCore Technical Engineer \u2013 Chassis \u0026 Underhood Materials EngineerAuburn Hills, MIProgram management capability to organize short- and long-term materials development programs, coordinate efforts between Materials Engineering and Platform Engineering, Quality and Manufacturing \n. Working closely with Product Engineers, sub-tier suppliers and materials suppliers in the development, application and specification of materials as well as integration into vehicle applications.
Materials Engineer Eaton Corporation PlcMaterials EngineerMarshall, MI$71,000–$105,000 / yearMinimum one (1) year basic knowledge of ferrous metallurgy, heat treating, and/or failure analysis (accepted experience is inclusive of college courses on related topic, co-ops, internships and/or direct work experience). After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.
NewConstruction Materials Associate Principal Engineer Engineering Consulting Services LtdConstruction Materials Associate Principal EngineerDetroit, MIECS is currently ranked #60 in Engineering News-Record's Top 500 Design Firms (April 2026), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). Bachelor of Science in any of the following: Civil Engineering, Construction Engineering and Management, Materials Science Engineering, Architectural Engineering, or Geology; Note: Construction Management degrees and certain Technology degrees may not be considered.
NewConstruction Materials Associate Principal Engineer ECS LtdConstruction Materials Associate Principal EngineerDetroit, MichiganECS is currently ranked #60 in Engineering News-Record’s Top 500 Design Firms (April 2026), #148 in Engineering News-Record’s Top 200 Environmental Firms (October 2025) and #50 in Zweig Group’s Hot Firm List (May 2025). Bachelor of Science in any of the following: Civil Engineering, Construction Engineering and Management, Materials Science Engineering, Architectural Engineering, or Geology; Note: Construction Management degrees and certain Technology degrees may not be considered.
Senior Materials & Processes Engineer (Additive Manufacturing) Blue OriginSenior Materials & Processes Engineer (Additive Manufacturing)Southgate, Washingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Materials and Process Engineer III, Engines Blue OriginMaterials and Process Engineer III, EnginesSouthgate, Washingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Materials & Chemical Management Engineer Yazaki North America IncMaterials & Chemical Management EngineerCanton, MIThey may provide technical support for existing production technologies to engineering groups for YNA customer programs both regionally and globally, evaluate validation and process development issues and provide direction for resolution. Materials and Chemical Management Engineers work to design, develop, document, and/or implement processes and tools that enable effective execution of customer deliverables throughout the Engineering organization.
Distinguished Engineer, Materials SME Harman International Industries IncDistinguished Engineer, Materials SMENovi, MIThis role applies strong analytical and problem-solving skills to identify root causes of material-related failures, optimize material composition and processing, and ensure performance, durability, and cost targets are met. This Materials Expert position will work in the global Car Audio speaker engineering team and will be responsible for the selection, specification, development, and validation of materials used in automotive loudspeakers and components.
NewSenior Materials Engineer - Fluids and Lubricants GMSenior Materials Engineer - Fluids and LubricantsWarren, MichiganThis individual contributor role provides technical leadership across one or more GEFL areas, including fuels, engine and driveline lubricants, EV/EDU fluids, coolants, hydraulic fluids, washer fluids, greases, and other specialty fluids. The role works cross-functionally with Engineering, Manufacturing, Validation, Service, Purchasing, suppliers, and regulatory partners to define requirements, deliver robust material and fluid solutions, and support product excellence across global programs.
Senior Materials Process Engineer Lear CorpSenior Materials Process EngineerSouthfield, MIAs a Senior Process Engineer on the Advanced Materials team, you will be responsible for identifying and implementing supply chain initiatives in our NA JIT facilities, primarily focused on proactively planning material flow concepts, manufacturing site layouts, and performing supply chain studies prior to new program launches. Benchmarking, vetting and implementing industry 4.0 (i4.0) initiatives i.e. Automated Guided Vehicles (AGVs), Automated Storage and Retrieval Systems (ASRS), Vertical Lift Modules (VLMs), specialty cart designs, etc.
Quality Engineer - Aerospace Materials PPG Industries IncQuality Engineer - Aerospace MaterialsShelby, MIThrough leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company. This role is a part of the Shelby Quality Organization and provides subject matter expertise in quality sciences to drive compliance and continuous improvement across the product lifecycle.
Engines Materials & Process - Casting Engineer III Blue OriginEngines Materials & Process - Casting Engineer IIISouthgate, Washingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Aerospace Materials Process Engineer and Digital Twin Lead PPG Industries IncAerospace Materials Process Engineer and Digital Twin LeadShelby, MIProvide engineering support to improve manufacturing unit operations process flows, process capability, production yields, overall cost of goods sold, equipment reliability, waste minimization, and EH&S improvements through data-based decision making. As an Aerospace Materials Process Engineer and Digital Twin Lead, you will be responsible for developing plant simulation and troubleshooting plant process systems including the implementation of process strategies, identifying and optimizing critical process variables, and maintaining process documentation.
Senior Materials Engineer - Fluids and Lubricants General Motors CoSenior Materials Engineer - Fluids and LubricantsWarren, MIThis individual contributor role provides technical leadership across one or more GEFL areas, including fuels, engine and driveline lubricants, EV/EDU fluids, coolants, hydraulic fluids, washer fluids, greases, and other specialty fluids. The role works cross-functionally with Engineering, Manufacturing, Validation, Service, Purchasing, suppliers, and regulatory partners to define requirements, deliver robust material and fluid solutions, and support product excellence across global programs.
Engines: Materials and Processes Engineer I - Early Career (2026 Starts) Blue OriginEngines: Materials and Processes Engineer I - Early Career (2026 Starts)Southgate, Washingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
FEA Material Trial Engineer Ford Motor CoFEA Material Trial EngineerDearborn, MI$5–$8 / hourCross-Functional Interface: Act as a key interface and technical liaison between Product Development (PD), Research & Innovation Center (RIC), Materials Engineering, Paint, and Supplier Technical Assistance (STA) teams to gather necessary technical support and insights. Trial Optimization & Planning: Work in teams to develop strategic plans and guide part selection to minimize the number of required trials while ensuring comprehensive data collection and validation.
NewMaterial Handling Automation Execution Engineer GMMaterial Handling Automation Execution EngineerWarren, MichiganYou will collaborate with cross-functional teams, strategic suppliers, and plant partners to implement technologies such as AMRs, AFTs, ASRS, and advanced kitting/sequencing systems from concept through launch. • Identify and evaluate automation opportunities in partnership with Automation Solutions and plant teams to reduce waste, indirect labor, and variability in material flow.
Senior Industrial Engineer - Material Flow Ghafari AssociatesSenior Industrial Engineer - Material FlowDearborn, MichiganHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Through robust training, licensure support, internships, mentorships, and tuition reimbursement, we provide the resources our people need to build rewarding careers while making a lasting difference in the communities we are proud to call home.
NewCost Engineer - Material Cost Specialist GMCost Engineer - Material Cost SpecialistWarren, MichiganREQUIREMENTS : Bachelor's degree in Business Administration, Finance, Industrial Engineering, or related field of study and Three (3) years of experience as a Cost Estimator, Cost Engineer, or related occupation Requires three (3) years of experience with the following: Analyzing, organizing, and understanding large data sets; Comprehensive manufacturing process knowledge; Financial evaluation of technical concepts and comprehensive understanding of production processes; Developing supplier component quotes to OEM’s; Manufacturing and/or launch experience in an automotive setting; Interior Cockpit manufacturing processes including Injection molding, Low pressure Injection Molding (LPIM), Foam-In-Place Molding, IMG process, decorative trim processes, wrapping and sewing part manufacturing, sonic and vibration welding, and clip and screw assembly; and TcPCM quoting software and using Power BI/Data Analytics dashboards to estimate “high level costing” based on early engineering concepts without design availability. Work with the product engineering team, the purchasing and supply chain team, the vehicle program team, our global joint venture partners in China, and to an extent the external component supply base.
NewMaterial Packaging Engineer The PAC GroupMaterial Packaging EngineerTroy, MichiganThis role will oversee packaging from prototype design through RFQ, supplier selection, procurement, validation, and production readiness, ensuring parts are protected, cost-effective, ergonomic, and delivered in alignment with program timing. We’re proud to partner with the world’s leading companies in automotive, aerospace, industrial, and technology sectors, providing strategic guidance and hands-on execution that drive innovation and efficiency.
Material Handling Automation Execution Engineer General Motors CoMaterial Handling Automation Execution EngineerMIYou will collaborate with cross-functional teams, strategic suppliers, and plant partners to implement technologies such as AMRs, AFTs, ASRS, and advanced kitting/sequencing systems from concept through launch. Identify and evaluate automation opportunities in partnership with Automation Solutions and plant teams to reduce waste, indirect labor, and variability in material flow.
Magna Engineered Glass: Material Handler Magna International, IncMagna Engineered Glass: Material HandlerHolland, MichiganThe Magna Exteriors portfolio of products includes access systems such as liftgates, exterior trim, modular systems, front-end modules including fascia, active aerodynamic systems and other lightweight structural components for automotive, commercial truck and other industrial markets. Recognized globally as an innovator in all aspects of vehicle exteriors, Magna provides everything needed, from materials development and design through manufacturing and assembly, to help automakers create sleek, state-of-the-art vehicles across the world.
NewConstruction Materials Department Manager ECS LtdConstruction Materials Department ManagerDetroit, MichiganECS is currently ranked #60 in Engineering News-Record’s Top 500 Design Firms (April 2026), #148 in Engineering News-Record’s Top 200 Environmental Firms (October 2025) and #50 in Zweig Group’s Hot Firm List (May 2025). What We're Looking For: Required Experience and Skills : 6-8+ years of related engineering experience, including conducting laboratory testing, construction observation, field quality assurance testing, site grading and supervising construction materials testing.
Adv Manufacturing Engineer –Material Application & Thermal Processing LUXWALL, INCAdv Manufacturing Engineer –Material Application & Thermal ProcessingDetroit, MILuxWall’s vacuum insulated technology, Enthermal, delivers a step change in energy performance, eliminating convective heat transfer and drastically reducing conductive and radiant heat gain and loss within buildings. Ensure programmed systems achieve critical targets including output per hour, process yield, unscheduled downtime, MTTR, MTBF, number of required operators and other critical parameters per manufacturing planning and targets.
NewCost Engineer - Material Cost Specialist General Motors CoCost Engineer - Material Cost SpecialistWarren, MIREQUIREMENTS: Bachelor's degree in Business Administration, Finance, Industrial Engineering, or related field of study and Three (3) years of experience as a Cost Estimator, Cost Engineer, or related occupation Requires three (3) years of experience with the following: Analyzing, organizing, and understanding large data sets; Comprehensive manufacturing process knowledge; Financial evaluation of technical concepts and comprehensive understanding of production processes; Developing supplier component quotes to OEM's; Manufacturing and/or launch experience in an automotive setting; Interior Cockpit manufacturing processes including Injection molding, Low pressure Injection Molding (LPIM), Foam-In-Place Molding, IMG process, decorative trim processes, wrapping and sewing part manufacturing, sonic and vibration welding, and clip and screw assembly; and TcPCM quoting software and using Power BI/Data Analytics dashboards to estimate "high level costing" based on early engineering concepts without design availability. Work with the product engineering team, the purchasing and supply chain team, the vehicle program team, our global joint venture partners in China, and to an extent the external component supply base.
Materials Science Engineering Technical Specialist Cummins IncMaterials Science Engineering Technical SpecialistTroy, MITo be successful in this role you will need the following: Deep Technical Expertise in Materials & Casting: A solid understanding of casting processes, material behavior, and material‑processing interactions to accurately diagnose issues, validate design intent, and make sound material and process selections. Improve Technical Knowledge Transfer: Produce clear, accurate technical documentation that captures learnings, supports decision‑making, and enables efficient knowledge sharing across engineering, operations, and cross‑functional teams.
NewConstruction Materials Department Manager Engineering Consulting Services LtdConstruction Materials Department ManagerDetroit, MIECS is currently ranked #60 in Engineering News-Record's Top 500 Design Firms (April 2026), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). Required Experience and Skills: 6-8+ years of related engineering experience, including conducting laboratory testing, construction observation, field quality assurance testing, site grading and supervising construction materials testing.
NewConstruction Materials Group Manager ECS LtdConstruction Materials Group ManagerDetroit, MichiganECS is currently ranked #60 in Engineering News-Record’s Top 500 Design Firms (April 2026), #148 in Engineering News-Record’s Top 200 Environmental Firms (October 2025) and #50 in Zweig Group’s Hot Firm List (May 2025). As the Group Manager, you will oversee engineering projects, staff, business development, and day-to-day operations for the branch.
Senior Engineering Technician - Construction Materials Testing Intertek Group PlcSenior Engineering Technician - Construction Materials TestingPlymouth, MIThe technicians and inspectors will support the Building and Construction business performing Construction Materials Testing services, working closely with a project engineer or manager, communicating results and findings from field tests and observations and preparing reports from data gathered. Working at Intertek means joining a global network of state-of-the-art facilities and passionate people who deliver superior customer service with a purpose of bringing quality, safety, and sustainability to life.
NewConstruction Materials Group Manager Engineering Consulting Services LtdConstruction Materials Group ManagerDetroit, MIECS is currently ranked #60 in Engineering News-Record's Top 500 Design Firms (April 2026), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). Preferred Education & Certifications: MS in Civil Engineering from an ABET accredited college/university with a concentration in geotechnical engineering.
NewMaterial Handling Manufacturing Engineer Actalent IncMaterial Handling Manufacturing EngineerTroy, MIRemote$40–$45 / hourFamiliarity with PFEP data, assembly and body shop manufacturing processes, industrial engineering job balancing, internal logistics delivery routes, warehouse management, and ERP systems. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service.
Data Scientist - Materials R&D - Remote-Travel Intertape Polymer Group IncData Scientist - Materials R&D - Remote-TravelMarysville, MIRemotePosition Purpose: The Senior Data Scientist will support R&D efforts in bio-polymers and sustainable materials and focusing on applying advanced data science, statistical modeling, and machine learning to experimental, process, and materials data to accelerate innovation, improve material performance, and reduce development cycles. From tapes and films to packaging and protective products, as well as engineered coated materials and advanced packaging machinery, we develop innovative solutions that protect the world.
Shipping, Receiving, Materials Technician NiowaveShipping, Receiving, Materials TechnicianLansing, MichiganWhat you can expect to work on… Directly responsible for the day-to-day shipping and receiving activities of radioisotopes, including but not limited to the following operational and technical aspects: Manages the shipment and receipt of hazardous/nonhazardous materials and products. Supports daily operations with the receiving, pick, pack, and shipping processes; initiate Purchasing Requisitions as needed to maintain target inventory levels; ensure compliance with applicable procedures and regulations throughout operations.
Global Procurement Director, Direct Materials Koch IncGlobal Procurement Director, Direct MaterialsRochester Hills, MIGlobal Procurement Director, Direct Materials - United States - 190202 - Koch. Koch Disruptive Technologies.
NewWarehouse Worker-Material Handler-2nd Shift Penske Truck RentalWarehouse Worker-Material Handler-2nd ShiftLIVONIA, MIPenske Logistics engineers state-of-the-art transportation, warehousing and freight management solutions that deliver powerful business results for market-leading companies. • Ability to work independently, customer service, dealing with others, multi-tasking skills, organizational skills, flexible, excellent with numbers and time management skills required.
NewMaterial Planner SRC IncMaterial PlannerHarrison, MIRemote$60,000–$70,000 / yearWhat You'll Do: Plan, schedule, and coordinate material procurement plans for deliveries of raw material, component piece parts, and assembled items for assigned programs in support of program material plans and delivery schedules. B.S. degree in supply chain management, business, or manufacturing and 2 years of planning or related experience or any equivalent combination of education, training, and experience can be used in lieu of noted degree and experience.
Adjunct Instructor- Material Sciences Technology Ferris State UniversityAdjunct Instructor- Material Sciences TechnologyBig Rapids, MIFLSA: Exempt Temporary/Continuing: Temporary Part-Time/Full-Time: Part-Time Union Group: Ferris Nontenure-Track Faculty Organization (FNTFO) (AFT) Term of Position: As Needed At Will/Just Cause: Just Cause Summary of Position: The School of Design and Manufacturing invites applications for an adjunct faculty position in the Materials Science and Technology (MATL) program. Additional Education/Experiences to be Considered: Essential Duties/Responsibilities: Primary responsibility is teaching Material Sciences to undergraduate level students in AS and BS Engineering Technology degree programs: Meet established course outcomes.
Technical Raw Material Developer- PPE Carhartt, Inc.Technical Raw Material Developer- PPEDearborn, MIPosition Details: Title: Technical Raw Material Developer- PPE Department: Global Product Development Reports to: Sr Manager, Technical Development- PPE Location: Dearborn Job Classification: Hybrid FLSA Status: Exempt Job Band: Professional Job Summary The Technical Raw Material Developer collaborates with the Design and Merchant teams to develop new materials and executes against seasonal timelines. Continue to build on technical expertise and industry trends related to the textile and apparel industry including new technologies and with a focus on how these changes and/or trends can influence and support divisional and company strategies.
Adjunct Instructor- Material Sciences Technology DetailsAdjunct Instructor- Material Sciences TechnologyMichiganFLSA: Exempt Temporary/Continuing: Temporary Part-Time/Full-Time: Part-Time Union Group: Ferris Nontenure-Track Faculty Organization (FNTFO) (AFT) Term of Position: As Needed At Will/Just Cause: Just Cause Summary of Position: The School of Design and Manufacturing invites applications for an adjunct faculty position in the Materials Science and Technology (MATL) program. Additional Education/Experiences to be Considered: Essential Duties/Responsibilities: Primary responsibility is teaching Material Sciences to undergraduate level students in AS and BS Engineering Technology degree programs: Meet established course outcomes.