NewAcquisition Program Engineer-Materials DCS CorpAcquisition Program Engineer-MaterialsEglin, FloridaDCS has an exciting opportunity for a Senior Acquisition Program Materials Engineer supporting Air Force Life Cycle Management Center Agile Weapons Division ARRW program (AFLCMC/EBX ARRW).This position provides the knowledge and experience to efficiently and effectively deliver weapons systems engineering capabilities in support of the acquisition process. Bachelor of Science degree in related discipline and 10 years of relevant experience; OR Master of Science degree in related discipline and 5 years of relevant experience; OR PhD in related discipline and 3 years of relevant experience.
NewHotel Engineer III Marriott International, IncHotel Engineer IIIBal Harbour, FLTroubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management.
NewManufacturing Engineer STS Technical ServicesManufacturing EngineerStuart, FLThis role is responsible for developing manufacturing processes, supporting production implementation, improving operational efficiency, and driving industrialization efforts across complex aerospace programs. STS Technical Services is seeking experienced Manufacturing Engineers to support aerospace manufacturing and industrialization operations in Stuart, Florida.
Systems Engineer Technician (SET) – WARPATH Training Specialist DCS CorporationSystems Engineer Technician (SET) – WARPATH Training SpecialistNiceville, FLThe Workflow Application for Recording Production and Targeting History (WARPATH) Systems Engineer Technician (SET) for training is a vital role responsible for ensuring all users are proficient in leveraging WARPATH to its full potential. Familiarization and experience with target list management functions throughout the Joint Targeting Cycle with emphasis on Post Advanced Target Development (ATD) and Joint Prioritized Target Lists (JPTL).
NewAcquisition Program Engineer CredenceAcquisition Program EngineerEglin Air Force Base, FL$105,000–$110,000Credence has an immediate need for an Acquisition Program Engineer at the journeyman level to support The Air Dominance Division, AFLCMC/EBA, has responsibility for developing, producing, and sustaining Counter-Air, Counter-Air Defense, and Aerial Targets (including control and payload systems) for our nation's warfighters and foreign military customers. Knowledge and experience with aircraft/store mechanical, aerodynamic, electrical, logical, and logistical compatibility; aircraft and store electrical power; avionics systems; mission computers; pilot/vehicle interfaces; stores management systems; GPS; INS; and control actuators.
Mechanical Engineer Vaco LLCMechanical EngineerSarasota, FL$115,000–$135,000 / yearDetermining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual’s skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. Determining compensation for this role (and others) at Vaco/Highspring depends upon a wide array of factors including but not limited to the individual’s skill sets, experience and training, licensure and certifications, office location and other geographic considerations, as well as other business and organizational needs.
NewCommercial Construction Project Engineer HITT ContractingCommercial Construction Project EngineerPembroke Pines, FLMaster required job-specific and technical skills in order to promote to an assistant superintendent or assistant project manager following the 12-month training program including, but not limited to, the ability to: Set up and maintain jobsite office and all jobsite records, including project directory, construction documents, subcontractor directory, daily reports, submittal logs, RFI logs, subcontractor correspondence, etc. Ability to learn sector- and project-specific software systems, including but not limited to: Microsoft Office 365 (Project, Excel, Word, Outlook, PowerPoint, etc.), ProCore, Adobe Suite, BlueBeam, and JD Edwards software suite.
Systems Engineer Butler America AerospaceSystems EngineerWindermere, FLRemote$50–$58 / hourContractorCandidate must have at least 3 years of experience with Developing Physical Architecture including Block Definition Diagrams (BDDs) and Internal Block Diagrams (IBDs). Create Internal Block Diagrams (IBDs), Use Cases, Functional Diagrams and other architectural views using MBSE tools.
Applications Engineer Vaco LLCApplications EngineerOakland Park, FL$92,000–$125,000 / yearDetermining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual’s skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. Salary: $92-125k based on experience PURPOSE Leads the creation and release of high quality end user and service documentation, supports Customer Service by completing successful product installations and resolving technical issues.
NewElectrical Engineer II System OneElectrical Engineer IILake Mary, FL$80,000 / hourDesign electrical power distribution systems for Gas Turbine auxiliary equipment, primarily working with low-voltage systems (600V and below) including MCCs, Panelboards, LV Transformers, DC Systems, and Batteries. Generate electrical drawing packages to document logic, wiring, and system interactions, interpreting and designing per applicable electrical codes such as NEC/NFPA 70, CEC, IEC, ISA, AGA, etc.
Mechanical Design Engineer - UAV - Melbourne, FL Michael Page USAMechanical Design Engineer - UAV - Melbourne, FLMelbourne, FL$85,000–$110,000 / yearFull timeThe UAV Mechanical Design Engineer is responsible for designing, analyzing, and optimizing mechanical systems for next-generation unmanned aerial vehicles used in defense, commercial, and research applications. This organization is a rapidly growing aerospace and advanced engineering firm focused on cutting-edge autonomous systems and high-reliability platforms.
NewMechanical Engineer AxelonMechanical EngineerClearwater, FL$35–$45 / hourAccredited Bachelor's degree in Engineering or related field along with internship experience or six (6) or more months of related work experience. Maintain effective communication with suppliers, internal and external customers, and outside resources concerning technical issues.
NewAcquisition Program Engineer- Electronic Warfare DCS CorpAcquisition Program Engineer- Electronic WarfareEglin, FloridaBachelor of Science degree in related discipline and 20 years of relevant experience; OR Master of Science degree in related discipline and 15 years of relevant experience; OR PhD in related discipline and 5 years of relevant experience. Undergraduate and/or graduate engineering degree from a college or university with an Accreditation Board of Engineering and Technology (ABET) accredited engineering program.
Associate Software Engineer CollaberaAssociate Software EngineerTampa$22–$25 / hourTemporaryContractorYou’ll work on live engineering projects, gain early exposure to AI-driven initiatives, and collaborate closely with experienced engineers in a supportive learning environment. About the Role: This role is designed for students and recent graduates who are excited to start their software engineering career with hands-on, real-world experience.
NewMaster Planner - Supply Chain System OneMaster Planner - Supply ChainPine Hills, FL$80,000–$95,000 / hourBachelor’s degree in Logistics, Supply Chain Management, Business, or a related field; or at least 5 years of experience in material planning, production control, and inventory management in a manufacturing environment. Ability to read, analyze, and interpret technical documents, business materials, and regulations; write reports and correspondence; and effectively present information and respond to stakeholders.
NewLead Software Engineer, Oracle EPM Lennar HomesLead Software Engineer, Oracle EPMMiami, FLFull time8+ years of experience with business processes around and implementing the following Oracle EPM Cloud modules: Oracle Planning and Budgeting Cloud Service (PBCS/EPBCS), EDMCS (Enterprise Data Management Cloud Services), Narrative Reporting and FCCS(Financial Consolidation and Cloud Service). This role requires strong software development expertise, problem-solving abilities, and excellent interpersonal skills to deliver impactful solutions and provide a positive experience for end users.
Network Voice Engineer Lennar HomesNetwork Voice EngineerMiami, FLFull timeThis entry-level role assists in the deployment and optimization of networking technologies, including routers, switches, firewalls, and wireless access points, while also managing and supporting cloud-based telephony platforms such as Cisco Webex Cloud, Webex Contact Center, and Vonage Contact Center. Telephony Management: Assist in operating and optimizing cloud-based telephony systems, including Webex Cloud for internal telephony, Webex Contact Center for IT Service Desk operations, and Vonage Contact Center for sales and customer care.
Materials Engineer HEICO CorpMaterials EngineerHollywood, FLIncludes those working with composite materials or specializing in one type of material, such as graphite, metal and metal alloys, ceramics and glass, plastics and polymers, and naturally occurring materials for analyzing product failure data and laboratory test results to determine causes of problems and develop solutions. For more than 65 years, HEICO Corporation has thrived by serving niche segments of the aviation, defense, space and electronic industries by providing innovative and cost-saving products and services.
Journeyman Materials Engineer ANDROMEDA SYSTEMS INCORPORATEDJourneyman Materials EngineerJacksonville, FL$35–$67 / hourAndromeda Systems Incorporated (ASI) provides tools and services to assist Physical Asset Owners, Fleet Managers, and Military Program Managers in gaining critical insights into their equipments performance, identifying system improvements, optimizing operations and support, making better business decisions, and achieving measurable life-cycle cost savings. This role is critical to supporting various military aircraft depot overhaul programs by applying materials and process engineering principles to our core areas of expertise: inorganic coatings, cleaning, organic coatings, corrosion, wear, preservation, and additive manufacturing, specifically cold spray.
Journeyman Materials Engineer Andromeda Systems IncorporatedJourneyman Materials EngineerJacksonville, FL$35–$67 / hourAndromeda Systems Incorporated (ASI) provides tools and services to assist Physical Asset Owners, Fleet Managers, and Military Program Managers in gaining critical insights into their equipment’s performance, identifying system improvements, optimizing operations and support, making better business decisions, and achieving measurable life-cycle cost savings. This role is critical to supporting various military aircraft depot overhaul programs by applying materials and process engineering principles to our core areas of expertise: inorganic coatings, cleaning, organic coatings, corrosion, wear, preservation, and additive manufacturing, specifically cold spray.
Senior Materials Engineer Odyssey Systems Consulting Group, Ltd.Senior Materials EngineerNiceville, FloridaFull timePosition Summary: Odyssey has an exciting opportunity for a Senior Acquisition Program Materials Engineer supporting Air Force Life Cycle Management Center Agile Weapons Division ARRW program (AFLCMC/EBX ARRW).This position provides the knowledge and experience to efficiently and effectively deliver weapons systems engineering capabilities in support of the acquisition process. Bachelor of Science degree in related discipline and 10 years of relevant experience; OR Master of Science degree in related discipline and 5 years of relevant experience; OR PhD in related discipline and 3 years of relevant experience.
Materials Engineer Vision Point Systems, Inc.Materials EngineerDania Beach, FLFamiliar with basics of electronic motor control for fluid handling systems including programmable logic controllers (PLCs), tank level switches, variable frequency drives (VFDs), pump motors, dataloggers, and various sensors and transducers. Ability to perform basic electrical and mechanical troubleshooting for electronic control cabinets, sensor dataloggers, electric motors and motor controllers, pumps and fluid handling equipment, and HVAC systems.
Materials and Processes (M&P) Sr Engineer - Lunar Permanence Blue Origin Enterprises LPMaterials and Processes (M&P) Sr Engineer - Lunar PermanenceFL$145,188–$203,263.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To provide primary support to the Crew Systems product team, as well as ECLS, Avionics, Thermal, Structures, and Mechanisms, and whose responsibilities include but are not limited to: • Serve as the subject matter expert by leading oxygen compatibility assessments (OCA) for liquid oxygen lines, and flammability testing for metallic and non-metallic materials, components, and systems used in pressurized, human-rated spacecraft.
Senior Principal Materials & Processes Engineer Northrop Grumman CorpSenior Principal Materials & Processes EngineerMelbourne, FL$122,800–$184,200 / yearIn this role you will join an Integrated Product Team to develop, qualify, and optimize metallics, sealants, and coating solutions for critical structural applications, performing root‑cause analysis and defining processing specifications. Key Responsibilities may include, but are not limited to: Performs root cause analysis of material failures, provides effective solutions to production sealants & coatings issues OR metallics issues.
Materials and Process Engineer - Electrostatic Discharge (ESD) Blue Origin Enterprises LPMaterials and Process Engineer - Electrostatic Discharge (ESD)FLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Materials & Processes (M&P) Sr Engineer - Space Radiation - Lunar Permanence Blue Origin Enterprises LPMaterials & Processes (M&P) Sr Engineer - Space Radiation - Lunar PermanenceFL$145,188–$203,263.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. • Provide environment definition and guidance for compliance with space environment effects to hardware owners (SLS-SPEC-159, Cross-Program Design Specification for Natural Environments (DSNE)) in terms of designs and materials.
Materials and Processes (M&P) Engineer III - Corrosion Control Blue Origin Enterprises LPMaterials and Processes (M&P) Engineer III - Corrosion ControlFLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Responsibilities: Provide broad support for aerospace grade materials and processes including: aluminum, steel, inconel, copper, bronze, composite; forming, extrusion, plating, coating, friction welding, brazing, anodization, passivation, solid and sandwich laminates.
Materials and Process Engineer - Electrostatic Discharge (ESD) Blue OriginMaterials and Process Engineer - Electrostatic Discharge (ESD)Space Coast, Floridaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Engineer, Metallic Materials & Processes Otto AerospaceEngineer, Metallic Materials & ProcessesJacksonville, FloridaOTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Strong Business Communication: Use the right language, tone and storytelling techniques when communicating, describing, or explaining issues over email, chat, reports, presentations and other forms and channels of communication.
Materials Replenishment Engineer Industrial Electric ManufacturingMaterials Replenishment EngineerJacksonville, FloridaThe Materials Replenishment Engineer will play a key role in establishing and refining the material replenishment strategies that support IEM Enterprise lean production system. This role will also serve as a cross-functional liaison among Production, Supply Chain, and Fabrication to ensure successful adoption and execution of these new systems.
Materials and Processes (M&P) Engineer III – Corrosion Control Blue OriginMaterials and Processes (M&P) Engineer III – Corrosion ControlSpace Coast, Floridaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Lead Material Engineer - IPT / Ceramics Siemens Energy AGLead Material Engineer - IPT / CeramicsTampa, FLIn this hands-on role, you'll develop and optimize high-temperature ceramics, fine-tuning processes like injection molding, slip casting, and sintering to push the limits of durability and precision. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Material Engineer - Ceramic Siemens Energy AGMaterial Engineer - CeramicTampa, FLIn this hands-on role, you'll develop and optimize high-temperature ceramics, fine-tuning processes like injection molding, slip casting, and sintering to push the limits of durability and precision. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Materials Lab Technician HEICO CorpMaterials Lab TechnicianHollywood, FLFor more than 60 years, HEICO Corporation has thrived by serving niche segments of the aviation, defense, space and electronic industries by providing innovative and cost-saving products and services. Evaluations include grain size and microstructure features, macro and micro-hardness testing, spectroscopy, filler content determination, surface treatment characterization, among others.
Technician - Materials & Process (Heat Treat) Blue Origin Enterprises LPTechnician - Materials & Process (Heat Treat)FLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Technician - Materials & Process (Heat Treat) Blue OriginTechnician - Materials & Process (Heat Treat)Space Coast, Floridaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Materials & Process Engineering II – TPS, Sealants, Coatings & Adhesives Blue OriginMaterials & Process Engineering II – TPS, Sealants, Coatings & AdhesivesSpace Coast, Floridaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Materials & Process Engineering II - TPS, Sealants, Coatings & Adhesives Blue Origin Enterprises LPMaterials & Process Engineering II - TPS, Sealants, Coatings & AdhesivesFLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Construction Materials Testing Department Manager Pacscon Geoenvironmental IncConstruction Materials Testing Department ManagerTampa, FLAs the Construction Materials Testing Department Manager, you will be responsible for developing and managing the construction materials testing business. This is a leadership position, offering competitive compensation and the possibilities for profit sharing and ownership to the right candidate.
Construction Materials Testing Department Manager Tetra Tech IncConstruction Materials Testing Department ManagerOrlando, FLThe successful candidate will lead an established department providing construction materials testing, special inspections, and quality assurance services for a diverse client base that includes municipalities, counties, utilities, educational institutions, transportation agencies, industrial clients, developers, contractors, and private owners throughout Central Florida. The Orlando office maintains a strong portfolio of continuing services contracts and long-standing client relationships, providing a stable workload across public infrastructure, commercial, industrial, institutional, and private development projects.
Sales Engineer - Material Handling Resource ErectorsSales Engineer - Material HandlingTampa, FLThis position offers strong financial earnings potential, including structured quarterly and annual bonuses, and significant long-term wealth creation through our Employee Stock Ownership Program (ESOP). Provide technical consulting services for customers operating in the construction aggregate and minerals processing industries.
Construction Materials Project Manager Engineering Consulting Services LtdConstruction Materials Project ManagerJacksonville, FLECS is currently ranked #60 in Engineering News-Record's Top 500 Design Firms (April 2026), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). Tasks supporting the management of construction materials testing projects, including daily report review, collaborating with project teams, providing resolutions of technical and administrative issues as they arise, and training field staff on your projects.
Materials Testing Field Technician (ACI Concrete and Earthwork) Universal Engineering SciencesMaterials Testing Field Technician (ACI Concrete and Earthwork)Rockledge, FLThis position primarily works in an outdoor work environment, regularly exposed to varying field conditions, including: Sites that may not be accessible by vehicle, requiring travel on foot through wetlands, swamps, grasslands, fields, and other uneven or rugged terrain with natural and man-made obstacles such as sand, brush, and debris. In addition to independent fieldwork, this position offers opportunities to potentially mentor junior technicians, sharing knowledge and best practices to enhance team performance and operational efficiency.
NewMaterials & Process Engineering - Avionics/Electrical Blue OriginMaterials & Process Engineering - Avionics/ElectricalTallahassee, FLResponsibilitiesDevelop, test, and qualify materials and processes supporting the manufacturing, fabrication, and installation of avionics hardware, including PCB/PCBA assembly, soldering, conformal coating, staking, potting/encapsulation, cable/harness assembly, and electronic packaging. Review test and inspection results from processed hardware, evaluate findings, and disposition non-conformances (MRB support).Work with an interdisciplinary team of design, manufacturing, and tooling engineers, as well as skilled operators, to develop fixturing, tooling, and assembly procedures for flight avionics.
Materials & Process Engineering – Avionics/Electrical Blue OriginMaterials & Process Engineering – Avionics/ElectricalSpace Coast, Floridaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Materials & Process Engineering - Avionics/Electrical Blue Origin Enterprises LPMaterials & Process Engineering - Avionics/ElectricalFLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Construction Services Department Manager - Construction Materials Testing Intertek Group PlcConstruction Services Department Manager - Construction Materials TestingTampa, FLWhat you'll do: Responsible for the overall management of a profit center including: • Planning, growth, profitability, cost control, employee development, quality control, and client relations • Position includes business development and collections activities • Leads employees to achieve optimal quality, safety, and production • Provide training and guidance to employees related to their job duties • Enforces company policies and procedures • Oversees management of internal quality program and accreditation • Manages recruitment, hiring and onboarding process • Monitors progress towards department goals • Perform project management related duties. Minimum Requirements & Qualifications: • Bachelor's Degree in Civil or Geotechnical Engineering is required • 5+ years of leadership, management, and/or project management experience in Construction Materials Testing and/or Geotechnical is required • Internal PMCP completion within 6 months of hire • Prior personnel management, hiring and training experience required • Enhanced Computer Skills • Must be customer-focused and quality-driven • Ability to communicate and interact effectively in verbal & written communication • May travel up to 15% of time • Valid Drivers License and reliable driving record required.
Materials Department Manager III Terracon Consultants IncMaterials Department Manager IIIWinter Park, FLYou will also be part of a high-functioning leadership team that guides over 130 professionals in construction materials testing and special inspections, geotechnical engineering, environmental consulting, environmental planning, and landscape architecture services. Supervise the daily operations of a department including staff training, development, and performance review; utilization of equipment and facilities; safety oversight; quality of services and work product; timely delivery of services and deliverables; and adherence to policies and procedures.
Project Manager - Materials Service Line Terracon Consultants IncProject Manager - Materials Service LineJacksonville, FLThis may include preparing calculations, designs, reports and work specifications; developing project schedules, budgets and forecasts; and selecting materials, equipment, project staff, and external contractors. General Responsibilities: Manage all aspects of a facilities, materials, environmental, or geotechnical engineering project to ensure that it is safely completed on time and within scope and budget.