NewAssembly Technician II Professional Placement ServicesAssembly Technician IIHillsboro, ORp>PPS is seeking an experienced Assembly Tech II at our state-of-the-art semiconductor servicing industry facility in Hillsboro, OR. This is a full-time, permanent position that comes with a highly competitive pay rate, second-to-none benefits, and a high ceiling for growth!
NewTechnician- Quality Assurance (Entry) Reser's Fine Foods, Inc.Technician- Quality Assurance (Entry)Hillsboro, ORAdherence and monitor of programs including HACCP Program, good manufacturing practices, foreign material control, plant sanitation, product quality assurance and other programs as assigned. Reser’s is the leading provider of fresh refrigerated deli salads, side dishes, and prepared foods for the supermarket, club store, and food service industries.
NewMaintenance Technician Reser's Fine Foods, Inc.Maintenance TechnicianHillsboro, ORReser’s is the leading provider of fresh refrigerated deli salads, side dishes, and prepared foods for the supermarket, club store, and food service industries. Perform additional duties as assigned including, but not limited to all facilities related tasks and work on special projects as required or assigned by the Facilities and Maintenance Manager.
NewMechanical Maintenance Technician AmrizeMechanical Maintenance TechnicianFairview, MDTo work as part of a team to ensure the continuous operation of the cement plant and associated facilities in order to maximize operational efficiency in an environment of continuous learning and improvement; to maintain, troubleshoot and repair plant equipment in accordance with plant needs within MSHA, and Amrize safety guidelines. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.
NewRefrigeration Start-Up Technician, Installation- Commercial &Industrial CoolSysRefrigeration Start-Up Technician, Installation- Commercial &IndustrialPortland, OR$45–$60The ideal candidate should know advanced solid state controls; oil systems safety controls; mechanical sub-cooling; introduction to head pressure controls for energy reduction; introduction to energy management systems (EMS); refrigeration rack oil systems; advanced de-frost diagnosis; and single and parallel compressor system start-up in a supermarket environment. Journeyman-HVAC, Journeyman-EMS, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, Electrical, start-up, startup.
NewManufacturing Associate Technician Genentech IncManufacturing Associate TechnicianHillsboro, OR$42,400–$78,800 / yearThe Opportunity: Under the direction of the Process Unit Lead or other qualified Operations Specialist, perform a wide variety of tasks and operations that are required to formulate, fill, inspect and package sterile pharmaceutical products in a state-of-the-art, automated production and packaging facility. Who You Are: You have a High School Diploma or equivalent with 1 to 2 years (within the last 7 years) experience in the operation of complex mechanical equipment used in the washing, filling, conveying, sealing, inspection and packaging of products/containers is.
Civil Engineer Technician 3 Automation and Control Strategies Group, INC. dba ACS Professional StaffingCivil Engineer Technician 3Vancouver, WAFull timeThis Civil Engineer Technician 3 will monitor vendor compliance with technical material specifications, witness testing, perform inspections, and review test reports to ensure quality and accuracy. * Provide assistance to Supply Chain by tracking and monitoring purchase orders and order progress including maintaining regular communication with the vendor to obtain current order status.
BIM/CAD Design Technician Automation and Control Strategies Group, INC. dba ACS Professional StaffingBIM/CAD Design TechnicianVancouver, WAFull timeThis role will drive consistency and ensure high-quality project delivery across a diverse portfolio, including office buildings, educational facilities, multifamily residences, hotels, restaurants, banks, retail spaces, and other high-profile developments. Our client, a well-established architecture and engineering firm, is seeking a skilled and experienced BIM/CAD Design Technician to collaborate with multidisciplinary teams, clients, contractors, and vendors in delivering innovative projects.
Electrical Engineer Technician 2 Automation and Control Strategies Group, INC. dba ACS Professional StaffingElectrical Engineer Technician 2Vancouver, WAFull timeProvide technician support to design engineers and technicians within the group in the form of reports, consolidation papers, printing design packages, preparing drawing lists, coordinating release of work-in-process (WIP) designs, and other CAD or technician needs. * Perform review of CAD and manually drafted drawings and other documents for drafting accuracy and completeness; provide feedback and/or make necessary corrections before review by engineers and technicians.
Electronic Engineering Technician Automation and Control Strategies Group, INC. dba ACS Professional StaffingElectronic Engineering TechnicianVancouver, WAFull timePerform review of CAD and manually drafted drawings and other documents for drafting accuracy and completeness; provide feedback and/or make necessary corrections before review by engineers and technicians. * Participate on teams and individually to research and document existing inventory of telecommunication and related equipment; may include data entry and clean-up efforts and coordination with the local District Resource Specialist.
Manufacturing Associate Technician - Aseptic Operations (Night Shift) Genentech IncManufacturing Associate Technician - Aseptic Operations (Night Shift)Hillsboro, OR$43,300–$70,800 / yearYour Opportunity: Under the direction of the Process Unit Lead or other qualified Operations Specialist, perform a wide variety of tasks and operations that are required to formulate, fill, inspect and package sterile pharmaceutical products in a state-of-the-art, automated production and packaging facility. Who You Are: You have a High School Diploma or equivalent with 1 to 2 years (within the last 7 years) experience in the operation of complex mechanical equipment used in the washing, filling, conveying, sealing, inspection and packaging of products/containers is highly desirable.
Manufacturing Test Technician MindlanceManufacturing Test TechnicianTualatin, OREnvironment is a Lean one-piece flow, testing various Schneider Electric products at 208V-690V, using electronic equipment i.e., Variac, Hi-Pot/Ground Bond, Power Analyzer, Oscilloscopes, Current Clamps, Digital Multi-Meters, etc., to ensure product quality. Test and document output results of products to validate results within specifications pass range or troubleshooting of failed testing.
Automation Technician Apprentice Airgas USA LLCAutomation Technician ApprenticeVancouver, WAFull timeThis is evident not only through our competitive compensation but also through a comprehensive benefits package that includes medical, dental, and vision plans, short-term and long-term disability, life and accidental death and dismemberment (AD&D) insurance, Employee Assistance Program (EAP), pre-tax commuter transportation benefit, parental leave, vacation, sick time, floating holidays, jury duty and funeral/bereavement leave, and paid holidays for all eligible full-time employees. The Automation Technician Apprentice performs service work on plasma, oxy/fuel cutting systems, and robots, including installation, preventative maintenance, onsite troubleshooting and service, component repair and performs component upgrades while ensuring a safe working environment.
NewBlood Component Manufacturing Technician American Red Cross Blood ServicesBlood Component Manufacturing TechnicianPortland, ORAmeriCorps, the federal agency that brings people together through service, and its partners - the Peace Corps, AmeriCorps Alums, National Peace Corps Association, and the Service Year Alliance - launched Employers of National Service to connect national service alumni with opportunities in the workforce. You grow your career within a movement that matters, where success is measured in people helped, communities made whole, and individuals equipped to never stop changing lives and situations for the better.
NewManufacturing Test Technician - Electro-Optical Systems Teledyne TechnologiesManufacturing Test Technician - Electro-Optical SystemsWilsonville, OregonOur products include advanced surveillance sensors, unmanned air and ground vehicles, sensing devices used to detect chemicals, biological agents, radiation and explosives, and a host of other solutions that help warfighters, first responders, and search-and-rescue teams do their jobs better. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research..
NewManufacturing QA Technician I MMC GroupManufacturing QA Technician IClackamas, OR$26–$27 / hourThroughout the past 35+ years, MMC, one of the most trusted names in workforce management services, has successfully delivered strategic solutions to large and small businesses in numerous industries. As a QA Technician I, you will play an important role in maintaining product quality and food safety by: Inspecting incoming raw materials and finished dairy products.
Manufacturing Technician- MOCVD (Compressed Night Shift) nLIGHT IncManufacturing Technician- MOCVD (Compressed Night Shift)Vancouver, WA$22.93–$28.70 / hourThis employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few.
Manufacturing Test Technician Artech LLCManufacturing Test TechnicianTualatin, OR$30–$34 / hourEnvironment is a Lean one-piece flow, testing various clients' products at 208V-690V, using electronic equipment i.e., Variac, Hi-Pot/Ground Bond, Power Analyzer, Oscilloscopes, Current Clamps, Digital Multi-Meters, etc., to ensure product quality. Test and document output results of products to validate results within specifications pass range or troubleshooting of failed testing.
CAD Technician 2 Automation and Control Strategies Group, INC. dba ACS Professional StaffingCAD Technician 2Vancouver, WAFull timeReviews preliminary sketches, drawings, specifications, and other engineering data to validate conformation to design concepts and to determine complexity and time estimates for completion. This role requires civil, structural, or electrical CAD drafting experience, strong mathematical skills (algebra and trigonometry), and proficiency with MS Office tools.
Manufacturing Test Technician HireTalentManufacturing Test TechnicianTualatin, ORThis role focuses on performing high voltage testing (208V 690V), ensuring product quality, and troubleshooting issues using diagnostic tools. We are seeking an experienced Manufacturing Test Technician to support electrical product testing in a controlled lab environment.
Cleanroom Technician, Manufacturing SBM Management ServicesCleanroom Technician, ManufacturingTualatin, OregonEducation and/ or Experience: High school diploma or GED with 1-2 years of recycling experience in a company environment or equivalent combination of training and experience - preferred. For information about SBM's benefits, please visit SBM's website at: www.sbmmanagement.com/careers Careers – SBM.
Manufacturing Test Technician - AccuSine HireTalentManufacturing Test Technician - AccuSineTualatin, ORThis role involves hands on testing of low and medium voltage electrical products in a Lean, one piece flow environment, with a strong focus on safety, documentation, and troubleshooting. We are seeking an experienced Electrical Test Technician to work in a restricted access electrical testing lab supporting product quality and compliance testing.
Manufacturing Test Technician PerformixManufacturing Test TechnicianTualatin, OregonEnvironment is a Lean one-piece flow, testing various Client products at 208V-690V, using electronic equipment i.e., Variac, Hi-Pot/Ground Bond, Power Analyzer, Oscilloscopes, Current Clamps, Digital Multi-Meters, etc., to ensure product quality. Test and document output results of products to validate results within specifications pass range or troubleshooting of failed testing.
Manufacturing Technician 2 FormFactor IncManufacturing Technician 2Beaverton, OR$18.80–$24.68 / hourSkills: Basic Math, Communication, Detail-Oriented, Digital Microscope, Heat Treatments, Manufacturing, Mechanical Assemblies, Mechanical Equipments, Microassembly, Microsoft Office, Product Assembly, Reading, Small Parts Assembly, Soldering, Teamwork, Wafer Probing, Work Instructions, Writing. FormFactor, Inc. (NASDAQ: FORM), is a leading provider of essential test and measurement technologies along the full semiconductor product life cycle from characterization, modeling, reliability, and design de-bug, to qualification and production test.
Manufacturing QA Technician I_USA LancesoftManufacturing QA Technician I_USAClackamas, OR$26Your attention to detail and commitment to excellence will play a crucial role in upholding our reputation for delivering top-quality milk products to our customers. ·Previous experience 1-2 years in quality assurance or a similar role in food production is preferred.
Mask Manufacturing Technician Intel CorpMask Manufacturing TechnicianHillsboro, OR$51,710–$73,010 / yearMinimum Qualifications: Candidates must meet the following minimum requirements: Candidate must possess a High school Diploma or GED AND 1+ years of relevant experience in one or more of the following: Military electronic/avionic technician training, End-user computer skills and navigation, Schematic/wiring diagram reading, Electronic systems, Troubleshooting and maintenance and the testing, And/or repairing and troubleshooting faulty electronic equipment down to a component using available schematics. Additional Locations: Business group: Intel Foundry strives to make every facet of semiconductor manufacturing state-of-the-art while delighting our customers -- from delivering cutting-edge silicon process and packaging technology leadership for the AI era, enabling our customers to design leadership products, global manufacturing scale and supply chain, through the continuous yield improvements to advanced packaging all the way to final test and assembly.
Manufacturing Technician Teledyne Technologies IncManufacturing TechnicianWilsonville, ORInterpret engineering drawings, assembly work instructions, and technical documentation to complete assigned tasks • Assemble precision electro-mechanical gimbal components and subassemblies using hand tools and torque-controlled equipment • Apply adhesives, epoxies, and bonding compounds in accordance with approved procedures and curing requirements • Perform alignment and calibration of gimbal systems using measurement and calibration equipment • Operate computers and manufacturing software to record build data, test results, and process completion • Conduct functional testing and verification to ensure assemblies meet performance and quality requirements • Troubleshoot mechanical and basic electrical issues using diagnostic tools and established procedures • Inspect completed assemblies to verify workmanship, accuracy, and compliance with specifications • Maintain organized documentation and accurately enter production and quality data into electronic systems • Follow electro static discharge (ESD), safety, and clean-handling procedures to protect sensitive components • Maintain a high level of attention to detail to ensure product reliability and consistency • Support continuous improvement and perform other related duties as assigned. High school diploma or Equivalent; Associates Degree preferred 1 - 2 years of experience in related technical field Printed circuit board (PCB) assembly experience preferred Proficient computer skills (Microsoft Office) required Able and willing to lift up to 50 pounds for short durations Meticulous attention to detail Demonstrated ability to learn on the job.
Manufacturing Technician CRH PlcManufacturing TechnicianWilsonville, ORJob Requirements • Minimum high school diploma or equivalent • Manufacturing or construction experience preferred • Knowledge of basic math and measurements • Ability to read and write simple instructions and communicate effectively with team members • Ability to lift up to 40 lbs. What CRH Offers You • Highly competitive base pay • Comprehensive medical, dental, and disability benefits programs • Group retirement savings program • Health and wellness programs • An inclusive culture that values opportunity for growth, development, and internal promotion.
Manufacturing Tech 1 - Swing Shift Washington Division Rough Country LLCManufacturing Tech 1 - Swing Shift Washington DivisionWoodland, WA$20–$21.50 / hourThe Manufacturing Tech I performs entry-level production tasks and is responsible for learning and becoming proficient in assigned production line duties. Rough Country LLC, located in Dyersburg, TN, is a customer-focused provider of aftermarket products servicing the truck, SUV, and UTV markets.
Manufacturing Technician CRH AmericasManufacturing TechnicianWilsonville, OROldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.
Director, Manufacturing Engineering Process Global, Air Manufacturing Innovation NIKE IncDirector, Manufacturing Engineering Process Global, Air Manufacturing InnovationBeaverton, ORThis role is a key member of the team that delivers AIR and is expected to: drive process optimization and deliver quality; integrate digital and automation solutions; lead continuous improvement and team collaboration with emphasis on Lean Six Sigma; and promote workplace safety. Demonstrate an ownership mindset and AMS behaviors: lead Kaizen events, reduce scrap and waste through root cause analysis, and advance data-driven digital and automation solutions across Air MI's global manufacturing network.
Manufacturing Tech I (15% differential) Tosoh Quartz CorporationManufacturing Tech I (15% differential)Portland, ORAs part of the diversified Tosoh Corporation family, our teams in the US and the UK collaborate across continents to deliver cutting-edge semiconductor industry solutions through advanced engineering and a commitment to continuous improvement. Perform detail work, which may include waxing, dewaxing, chamfering, acid wash or other cleaning, cosmetic inspection of parts and other similar functions.
Senior Manager Production, Manufacturing Operations Analog Devices IncSenior Manager Production, Manufacturing OperationsCamas, WA$143,200–$196,900 / yearp>Reporting to the Wafer Fab General Manager, the Senior Manager, Production - Fab Operations will lead our ~300-employee Production organization-including Production Managers, Supervisors, Trainers, 5S & Continuous Improvement, New Product Technicians, Leads, and Operators-who execute day-to-day manufacturing, testing, and shipping of a broad product portfolio as the fab continues to ramp, expand, and modernize a facility with over 25 years of operational history. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world.
Manufacturing Engineer 3 Lam Research CorpManufacturing Engineer 3Tualatin, ORAct as a technical interface with outsource manufacturers alongside supplier engineering team (SET) and supplier business management (SBM) to aid in outsource efficiency, including: engagement in supplier pilot builds, build training, test training, factory sequence and flow, correct build and test intent. Take responsibility of lab space, ensure material stocking, assist with material flow, plan work bench/space layout, plan test stand layout, work with facilities as needed for lab improvements to assist with manufacturing and test, selecting and installing new equipment as necessary.
NewManufacturing Engineer - Dental Furniture Assembly A-dec IncManufacturing Engineer - Dental Furniture AssemblyNewberg, OROpEx is centered on the identification and execution of high impact process improvements that reduce waste and foster innovative solutions that help A-dec operations deliver consistent manufacturing value to all internal product segments. Utilizes Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) systems to efficiently perform necessary design work for tools/fixtures or process area layouts, design review, and document creation.
Manufacturing Engineer - Machining A-dec IncManufacturing Engineer - MachiningNewberg, ORUtilizes Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) systems to efficiently perform necessary design work for tools/fixtures or process area layouts, design review, and document creation. • Performs all necessary data collection and work analysis to establish and update part fabrication and/or product assembly Enterprise Resource Planning (ERP) routes (setup and run times, operation sequence, etc.).
Manufacturing Engineering Manager Milegon LLCManufacturing Engineering ManagerCanby, ORPart timeThis is a hands-on engineering leadership role within a high-mix electronics manufacturing environment, working closely with engineering teams, technicians, and production personnel to improve manufacturing performance and support operational goals. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential functions of this position include, but are not limited to, the following: Engineering Leadership Lead and develop cross-functional engineering teams including NPI Engineers, Test Engineers, Manufacturing Engineers, and Maintenance Technicians.
Manufacturing Engineer Vanguard EMS, Inc.Manufacturing EngineerBeaverton, ORDrive DFX with data captured from process development, NPI builds and our internal knowledge base so that customers receive feedback in a timely manner and information is communicated effectively in a way that provides them the highest value. Strong working knowledge of SMT & Through-Hole Soldering, Component Prep, Automated Inspection Systems, Wash & Cleanliness, Electro-Mechanical Assembly, Coating/Staking/Bonding, etc.
Manufacturing Engineering Manager Milwaukee ElectronicsManufacturing Engineering ManagerCanby, OregonThis is a hands-on engineering leadership role within a high-mix electronics manufacturing environment, working closely with engineering teams, technicians, and production personnel to improve manufacturing performance and support operational goals. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential functions of this position include, but are not limited to, the following: Engineering Leadership Lead and develop cross-functional engineering teams including NPI Engineers, Test Engineers, Manufacturing Engineers, and Maintenance Technicians.
Manufacturing Systems Software Engineer Polaris IncManufacturing Systems Software EngineerBattle Ground, WA$90,000–$115,000 / yearPolaris high-quality product line-up includes the Polaris RANGER®, RZR® and Polaris GENERAL side-by-side off-road vehicles; Sportsman® all-terrain off-road vehicles; military and commercial off-road vehicles; snowmobiles; Slingshot® moto-roadsters; Aixam quadricycles; Goupil electric vehicles; and pontoon and deck boats, including industry-leading Bennington pontoons. Design and implement manufacturing software systems that control work-in-progress aspects of an assembly line, track product under development, report assembly test results to operators, upload manufacturing data to a factory management database, and generate reports for Operations management.
Manufacturing Engineering Supervisor Tosoh Quartz CorporationManufacturing Engineering SupervisorPortland, ORSupport engineering projects by coordinating workflows and defining expectations and responsibilities during product launch and handoff; work with engineers to ensure projects stay on track. As part of the diversified Tosoh Corporation family, our teams in the US and the UK collaborate across continents to deliver cutting-edge semiconductor industry solutions through advanced engineering and a commitment to continuous improvement.
Manufacturing Load Tech - 1st Shift Bodycote plcManufacturing Load Tech - 1st ShiftCamas, WA$20–$23 / hourBodycote has a longstanding commitment to provide a safe, quality-oriented, and productive work environment and for these reasons, all applicants in the United States who receive a conditional offer of employment must undergo a drug screen before employment begins. As the world's largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, some of the best engineers, scientists, and technicians in the industry.
Manufacturing Load Tech - 4th Shift Weekend Days Bodycote plcManufacturing Load Tech - 4th Shift Weekend DaysCamas, WA$20–$23 / hourBodycote has a longstanding commitment to provide a safe, quality-oriented, and productive work environment and for these reasons, all applicants in the United States who receive a conditional offer of employment must undergo a drug screen before employment begins. As the world's largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, some of the best engineers, scientists, and technicians in the industry.
Manufacturing Load Tech - 3rd Shift Bodycote plcManufacturing Load Tech - 3rd ShiftCamas, WA$20–$23 / hourBodycote has a longstanding commitment to provide a safe, quality-oriented, and productive work environment and for these reasons, all applicants in the United States who receive a conditional offer of employment must undergo a drug screen before employment begins. As the world's largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, some of the best engineers, scientists, and technicians in the industry.
Manufacturing Load Tech - 2nd Shift Bodycote plcManufacturing Load Tech - 2nd ShiftCamas, WA$20–$23 / hourBodycote has a longstanding commitment to provide a safe, quality-oriented, and productive work environment and for these reasons, all applicants in the United States who receive a conditional offer of employment must undergo a drug screen before employment begins. As the world's largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, some of the best engineers, scientists, and technicians in the industry.
Manufacturing Load Tech - 4th Shift Weekend Nights Bodycote plcManufacturing Load Tech - 4th Shift Weekend NightsCamas, WA$20–$23 / hourBodycote has a longstanding commitment to provide a safe, quality-oriented, and productive work environment and for these reasons, all applicants in the United States who receive a conditional offer of employment must undergo a drug screen before employment begins. As the world's largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, some of the best engineers, scientists, and technicians in the industry.
Manufacturing Engineering Manager ON Semiconductor CorpManufacturing Engineering ManagerGresham, ORWith a highly differentiated and innovative product portfolio, onsemi creates intelligent power and sensing technologies that solve the world's most complex challenges and leads the way in creating a safer, cleaner, and smarter world. onsemi is seeking a highly skilled and motivated Equipment Engineering & Maintenance Manager to lead and optimize the performance, reliability, and sustainment of manufacturing equipment supporting Implant, IHR, and Probe operations.
Printhead Manufacturing Test Engineer Xerox CorpPrinthead Manufacturing Test EngineerWilsonville, OROverview: Join Xerox as a Manufacturing Test Engineer supporting our Printhead Manufacturing team, where you will play a key role in ensuring product quality and performance for advanced industrial inkjet technologies. Today, Xerox is continuing its legacy of innovation to deliver client-centric and digitally-driven technology solutions and meet the needs of today's global, distributed workforce.
Manufacturing Tech ManpowerManufacturing TechHillsboro, ORFull timep>ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.
Manufacturing Supervisor Abbott LaboratoriesManufacturing SupervisorPortland, OR$61,300–$122,700 / yearThe Opportunity: The Portland, OR facility is seeking a highly capable and organized Manufacturing Supervisor to drive production performance by maintaining strong daily engagement with staff, using a hands-on approach to communication, problem-solving, and performance management to build a high-performing, motivated team. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines.