Manufacturing Engineer II (VA) GCR Professional ServicesManufacturing Engineer II (VA)Chantilly, VirginiaContractorYou will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
Production Supervisor (Manufacturing Operations Coordinator) GCR Professional ServicesProduction Supervisor (Manufacturing Operations Coordinator)Chantilly, VirginiaContractorYou will work directly with the Factory Operations Team in the execution of production tasks in accordance with defined production schedules and in accordance with documented policies, procedures, and the organization’s ISO9001/AS9100 registered Quality Management System. - Monitoring Key Performance Indicators (KPI's) and metrics and working Factory Operations stakeholders to develop and implement "Return to Green" plans as needed.
NewCommercial Construction Superintendent - Advanced Manufacturing HITT ContractingCommercial Construction Superintendent - Advanced ManufacturingFalls Church, VAli>Ensure complete, accurate daily documentation of work orders/tickets, understanding subcontractor scope of work to avoid unnecessary change orders, and identifying problems early and act immediately to provide solutions. The Superintendent provides leadership and serves as the liaison between project team members to promote the interest of both the business and clients in all matters, as well as demonstrate the characteristics of a mid-level leader.
NewBuilding Auotmation Lead Controls Technician, HVAC ABM IndustriesBuilding Auotmation Lead Controls Technician, HVACWashington, DC$50–$57For information about ABM’s benefits, visit ABM Employee Benefits | Front Line Team Members. Experience with BAS/controls contractors or large controls organizations such as Calvert Controls, Pritchett Controls, HVAC Concepts, S&W Controls, Johnson Controls, Honeywell Controls, or similar companies is preferred but not required.
Project Manager JobotProject ManagerColumbia, MD$90,000–$125,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Manage project setup logistics—submittals, RFIs, change orders, materials, labor, budgets, punch lists.
Manufacturing Professional Training Lead / Staff Project Manager Northrop Grumman CorpManufacturing Professional Training Lead / Staff Project ManagerBaltimore, MD$126,400–$219,500 / yearThe Manufacturing Professional Training Lead owns the end‑to‑end learning strategy for all manufacturing support functions (industrial engineering, manufacturing engineering, production control, etc.) This role designs, delivers, and continuously improves professional‑development programs that enhance technical competence, safety awareness, and leadership capabilities, ensuring the workforce can meet current production demands and future growth initiatives. This training professional will collaborate with instructional design staff and subject matter experts to identify, plan, create, design, test, implement, deliver, support, and maintain effective and engaging learning opportunities and training activities through a variety of modalities (self-paced, in-person, mobile, virtual, video, job aids, microlearning, articles, etc.).
Chemistry, Manufacturing and Controls (CMC) Lead Sia Partners SASChemistry, Manufacturing and Controls (CMC) LeadBaltimore, MD$164,000–$173,000 / yearThis consulting division works with healthcare organizations, pharmaceutical & biotech companies, CROs, academia, medical device/diagnostic companies, and non-governmental organizations (NGOs) alike to solve complex business, scientific, regulatory, technological and product development challenges. This individual will work closely with the Managing Director, functional area leads across Regulatory, Quality, Nonclinical, Discovery, Clinical, Project Management, and Government Services, as well as external CDMO partners and regulatory agencies.
Chemistry, Manufacturing and Controls (CMC) Senior Lead Sia Partners SASChemistry, Manufacturing and Controls (CMC) Senior LeadBaltimore, MD$180,000–$200,000 / yearThis consulting division works with healthcare organizations, pharmaceutical & biotech companies, CROs, academia, medical device/diagnostic companies, and non-governmental organizations (NGOs) alike to solve complex business, scientific, regulatory, technological and product development challenges. This individual will work closely with the Managing Director, functional area leads across Regulatory, Quality, Nonclinical, Discovery, Clinical, Project Management, and Government Services, as well as external CDMO partners and regulatory agencies.
Manufacturing Lead Plant Intern Robert Bosch GmbHManufacturing Lead Plant Internul>Assist in the planning of production, testing, sampling (work steps, workflow, production facilities, measurments, data collection and time allocation). By providing a wide product range since decades for our customers and clear view, no matter what weather we create smart solutions to bring safety and comfort to peoples lives.
Manufacturing Engineer II - Weld and Tank Blue OriginManufacturing Engineer II - Weld and TankWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As part of a highly collaborative team of engineers, technicians, and specialists, you will partner closely with design engineering, quality, and production teams to support the development and execution of manufacturing processes for tanks and composite overwrapped pressure vessel (COPV) hardware.
Specialist, Manufacturing Development and Production Planning ElectraSpecialist, Manufacturing Development and Production PlanningManassas, VAYou'll partner closely with the Director of Manufacturing Engineering on build plan and tooling readiness, with the VP of Industrialization & Manufacturing Strategy on capacity planning and the digital manufacturing backbone, with the VP of Supply Chain on material availability, and with Programs and Engineering on milestone integration. You'll build the production master schedule from first conforming articles through ramp-up, manage the program's recurring and non-recurring cost performance against plan, model the production learning curve, and own the S&OP cadence that ties customer demand to manufacturing capacity.
Senior Manager Production, Manufacturing Operations Analog DevicesSenior Manager Production, Manufacturing OperationsUs, Washingtonp>Reporting to the Wafer Fab General Manager, the Senior Manager, Production – Fab Operations will lead our ~300‑employee Production organization—including Production Managers, Supervisors, Trainers, 5S & Continuous Improvement, New Product Technicians, Leads, and Operators—who execute day‑to‑day manufacturing, testing, and shipping of a broad product portfolio as the fab continues to ramp, expand, and modernize a facility with over 25 years of operational history. Learn more at www.analog.com and on LinkedIn and Twitter (X).
Specialist, Manufacturing Development and Production Planning Electra Aero IncSpecialist, Manufacturing Development and Production PlanningManassas, VAYou'll partner closely with the Director of Manufacturing Engineering on build plan and tooling readiness, with the VP of Industrialization & Manufacturing Strategy on capacity planning and the digital manufacturing backbone, with the VP of Supply Chain on material availability, and with Programs and Engineering on milestone integration. You'll build the production master schedule from first conforming articles through ramp-up, manage the program's recurring and non-recurring cost performance against plan, model the production learning curve, and own the S&OP cadence that ties customer demand to manufacturing capacity.
Director- Manufacturing Quality Assurance Blue OriginDirector- Manufacturing Quality AssuranceWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Sr. Manager, Manufacturing Production Operations Oceaneering International IncSr. Manager, Manufacturing Production OperationsHanover, MD$138,300–$207,500 / yearli>Skilled in supervising and guiding sub‑functions that rely on ERP usage, including work order management, material transactions, labor entry, and routing updates, ensuring consistent and compliant system use across the team. The Production Manager is responsible for managing all production and systematic functions in support of OTECH programs, which includes the activities of the Manufacturing, Assembly, and Field Specialist groups as well as other Production staff.
Senior Manufacturing Engineer – Composite Structures ElectraSenior Manufacturing Engineer – Composite StructuresManassas, VAOur Ultra Short technology unlocks thousands of new operating locations and enables what we call Direct Aviation: quiet, point-to-point regional travel that gets people from where they are to where they want to go, without the congestion of major airports or the noise of conventional aviation. A global company, headquartered in Manassas, VA, Electra is backed by Lockheed Martin, Honeywell, and Safran, has filed for FAA Part 23 type certification, and carries 2,000+ intent to purchase from operators worldwide.
Senior Specialist, Manufacturing Electrical Engineer L3Harris Technologies IncSenior Specialist, Manufacturing Electrical EngineerAshburn, VA$96,000–$178,000 / yearThis role is responsible for creating, validating, and maintaining electrical inspection, validation equipment, processes, and documentation, be a key part of the Integrated Product Team to develop and execute validation and test plans, and collaborating with other engineering disciplines, program management, quality assurance, and manufacturing. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Senior Associate, Manufacturing Electrical Engineering L3Harris Technologies IncSenior Associate, Manufacturing Electrical EngineeringAshburn, VA$73,000–$136,000 / yearThis role is responsible for creating, validating, and maintaining electrical inspection, validation equipment, processes, and documentation, be a key part of the Integrated Product Team to develop and execute validation and test plans, and collaborating with other engineering disciplines, program management, quality assurance, and manufacturing. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
NewSenior Manufacturing Test Development Engineer JABIL CIRCUIT, INCSenior Manufacturing Test Development EngineerWashington, DCThis includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware components or devices such as motherboard, memory, CPU, storage (SSD, HDD, NVMe) and PCIE devices (NIC, GPU, Mezz cards, RAID cards). Expertise with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester.
Associate Manager, Manufacturing Engineering L3Harris Technologies IncAssociate Manager, Manufacturing EngineeringHanover, MD$104,000–$155,000 / yearp>Support design engineering during the design / development process to ensure that the design represents a cost-effective solution in terms of reliability, producibility, and supportability and meets the performance requirements over the life of the product. Develop and implement manufacturing engineering plans and schedules including process flows, test and inspection points, flow tags, assembly aids, use of automated test equipment, training needs and requirements.
NewSenior Manager, Manufacturing Test Development JABIL CIRCUIT, INCSenior Manager, Manufacturing Test DevelopmentWashington, DCJabil is seeking a Senior Manager, Manufacturing Test Development who will directly contribute to the transformative growth within our Intelligent Infrastructure division by leading the development of rack-scale manufacturing test solutions for hyperscale, AI, and data center infrastructure platforms. This role sits at the intersection of software, hardware, and manufacturing, and you will be responsible for managing the technical direction of rack-scale test software and system integration programs through the lens of the customer, factory, and services.
Senior Program Manager- Manufacturing Operations (Remote) Quantum Computing IncSenior Program Manager- Manufacturing Operations (Remote)Arlington, VARemoteThe candidate should have in-depth knowledge of and hands on experience deploying and maintaining Manufacturing Execution Systems (MES) as well as Enterprise Resource Planning (ERP) Systems and Quality Assurance / Quality Control (QA/QC) systems. After the rollout the program manager will continue to work closely with all the stakeholders to maintain and continuously improve the efficiency and effectiveness of the QCi's MOM systems and bridge the gap between technical teams and end users.
Sentinel Staff Supplier Manufacturing Engineer 18791 Northrop Grumman CorpSentinel Staff Supplier Manufacturing Engineer 18791VA$146,300–$219,500 / yearSkills: The ideal candidate will have familiarity with Manufacturing Readiness Levels, Manufacturing Modeling and Simulation, excellent written/verbal communication skills, and experience with transitioning a program from Engineering and Manufacturing Development (EMD) to Production. Inputs: This role will interface directly with suppliers and coordinate cross-functionally among Program Management, Supplier Management Teams, Industrial Engineering, and Manufacturing Engineering.
Manufacturing Product Manager - Modular MEP Systems Harris Contracting CompanyManufacturing Product Manager - Modular MEP SystemsMD$88,849–$133,273 / yearp>Visit our Careers Page for additional benefit details: https://www.harriscompany.com/careers/employee-benefits-at-a-glance. As one of the countrys leading mechanical contractors, Harris offers you the best of both worlds: the stability, resources and opportunities of a national company, and the team culture, creative spirit and customer loyalty of a local business.
NewDirector of Manufacturing Thales Defense & Security IncDirector of ManufacturingMD$202,767.30–$259,091.55 / yearWith over 1,000 employees, TDSI and its four subsidiaries (Advanced Acoustic Concepts, Digital Receiver Technology, Tampa Microwave, and Trusted Cyber Technologies), supports U.S. Joint Services, special operations forces and multi-national partners with a variety of communication, visualization, signal intelligence/electronic warfare, and sensor/sonar capabilities. Reporting to the Vice President of Operations, the Director of Manufacturing will lead multiple manufacturing departments, overseeing high-mix, low-to-medium volume electronics manufacturing, assembly, test, integration, and repair operations.
Manufacturing Engineer II, III, Sr (Multiple Shifts) - Lunar Blue OriginManufacturing Engineer II, III, Sr (Multiple Shifts) - LunarWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Manufacturing Engineer II - Electronics Fabrication Blue OriginManufacturing Engineer II - Electronics FabricationWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As part of a highly collaborative team, you will serve as a key technical interface between the production value stream and design engineering, ensuring smooth execution of hardware builds, rapid issue resolution, and continuous improvement across manufacturing processes.
Manufacturing QA Lab Technician II-Night Shift (10pm-6am) GAF Materials LLCManufacturing QA Lab Technician II-Night Shift (10pm-6am)Baltimore, MD$52,000–$71,500 / year4. Other exciting programs and perks are available to help employees achieve work-life balance, including (but not limited to) a wellness program, free financial coaching, a referral program, and product rebates when purchased for an employees primary residence. The QA Lab Technician II will perform various quality systems and testing activities for manufacturing operation, including raw material and process fluid testing, quality audits, plant trials, and quality lab maintenance and organization.
Specialist, Manufacturing Engineer(Operations Program Manager) L3Harris Technologies IncSpecialist, Manufacturing Engineer(Operations Program Manager)Hanover, MD$67,000–$124,000 / yearp>Job Description: The Manufacturing Engineer role will operate as an Operations Program Manager (OPM) - directs the development and implementation of activities in production areas to production goals, quality, cost, and delivery objectives. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
PCA Manufacturing Engineer - Defense Electronics Herrick Technology Laboratories Inc.PCA Manufacturing Engineer - Defense ElectronicsGermantown, MD$95,000–$130,000 / yearp>Summary: We are seeking a Manufacturing Engineer specializing in Printed Circuit Assembly (PCA) to support the production of advanced defense electronics, including software-defined radios, RF/microwave assemblies, and complex circuit card assemblies. The Manufacturing Engineer will act as the technical liaison between design engineering, operations, quality, and supply chain to ensure robust, repeatable, and compliant manufacturing processes for PCA builds.
Sr. Engineer Advanced Manufacturing Baltimore Aircoil CoSr. Engineer Advanced ManufacturingMD$124,500–$213,300 / yearAs part of the Americas Advanced Manufacturing Engineering department this position will have significant interaction with the Global and Americas Engineering Design and Manufacturing teams, the plant engineering teams, and the manufacturing plants. This includes all relevant operations aspects such as supply chain coordination, data flow processes, labor planning, training, and demand vs capacity and ramp up planning.
Senior Manufacturing Engineer - Composite Structures Electra Aero IncSenior Manufacturing Engineer - Composite StructuresManassas, VAOur Ultra Short technology unlocks thousands of new operating locations and enables what we call Direct Aviation: quiet, point-to-point regional travel that gets people from where they are to where they want to go, without the congestion of major airports or the noise of conventional aviation. A global company, headquartered in Manassas, VA, Electra is backed by Lockheed Martin, Honeywell, and Safran, has filed for FAA Part 23 type certification, and carries 2,000+ intent to purchase from operators worldwide.
Manager Manufacturing Training 2 Northrop Grumman CorpManager Manufacturing Training 2Annapolis, MD$115,000–$199,700 / yearThis training professional will collaborate with training staff and subject matter experts to identify, plan, create, design, test, implement, deliver, support, and maintain effective and engaging learning opportunities and training activities through a variety of modalities (self-paced, in-person, mobile, virtual, video, job aids, microlearning, articles, etc.). 3-5 years teaching experience (will consider military experience) including designing and developing formal course curriculums, establishing workforce development training needs, developing goals and objectives, developing training programs, and applying the ISD process.
Global Agile Leader- Manufacturing Baltimore Aircoil Company, Inc.Global Agile Leader- ManufacturingJessup, MDFull timeThe scrum mentor’s responsibilities include ensuring that development teams follow scrum framework values and agile practices, mentoring and motivating the teams to improve processes, facilitating meetings and decision-making processes, and eliminating team impediments. Ultimately, this position will play a key role in the long-term strategy to become a more agile organization, help our teams accelerate and meet our customers’ needs.
Supply Chain and Engineering- Greenfield Manufacturing Senior Manager / Associate Director Accenture PlcSupply Chain and Engineering- Greenfield Manufacturing Senior Manager / Associate DirectorArlington, VAThe role sits at the intersection of manufacturing, engineering, capital projects, and supply chain, and is responsible for shaping, selling, and delivering large scale greenfield programs across industries including life sciences, industrials, automotive, high tech, and process manufacturing. Champion digital manufacturing and Industry 4.0 solutions, including MES, digital twins, automation, data platforms, and advanced analytics, embedded into greenfield designs.
NewPrinc Manufacturing Project Engineer/Sr. Princ Manufacturing Project Eng 3/4 Northrop Grumman CorpPrinc Manufacturing Project Engineer/Sr. Princ Manufacturing Project Eng 3/4Baltimore, MD$98,900–$148,300 / yearli>collaborating closely with process engineers, functional groups supporting the shop floor (quality engineering, manufacturing supervision, production, operations, design engineering, program management), the program office, and the customer to ensure manufacturing plan is defined and executed; leading efforts to remove obstacles and constraints to execution. This requisition may be filled as a Principal Manufacturing Project Engineer 3 or a Senior Principal Manufacturing Project Engineer 4. Basic Qualifications for a Principal Manufacturing Project Engineer 3: Bachelor's degree in Engineering or other related STEM area and at least 5+ years of experience in Manufacturing/Process Engineering, Production, or related area - OR - a Master's degree with 3+ years of experience.
Manufacturing Product Estimator - Modular MEP Systems Harris Contracting CompanyManufacturing Product Estimator - Modular MEP SystemsUpper Marlboro, MD$71,079–$106,618 / yearp>Visit our Careers Page for additional benefit details: https://www.harriscompany.com/careers/employee-benefits-at-a-glance. From stadiums to manufacturing facilities, power plants to hospitals, and concert halls to classrooms, we handle projects of all sizes and complexity across multiple regional locations throughout the country.
Robotics Manufacturing Technician MolgRobotics Manufacturing TechnicianSterling, Virginiap style="min-height:1.5em">As a Robotics Manufacturing Technician, you will work alongside a collaborative, cross-functional team, gaining hands-on experience across manufacturing, robotics, and research & development (R&D). Given the importance of working hands-on with physical systems, we are a 100% in-person team collaboratively working in our industrial space in Sterling, VA, down the road from the largest data center market in the world.
Drone Manufacturing Engineer II Leonardo DRS IncDrone Manufacturing Engineer IIGermantown, MD$108,618–$119,479.80 / yearSeveral factors can influence the pay scale, including but not limited to: Federal contract labor categories and contract wage rates, collective bargaining agreements, geographic location, business considerations, scope, and responsibilities of the position, local or other applicable market conditions, and internal equity. And we understand there is more to life than work, and the importance of offering flexible work schedules with our 9/80 program, competitive vacation, health/emergency leave, paid parental leave, and community service hours.
Manufacturing Test Engineer III Westinghouse Air Brake Technologies CorpManufacturing Test Engineer IIIGermantown, MD$79,300–$113,000 / yearp>As a Manufacturing Test Engineer, you will work with a cross-functional Engineering team to develop and maintain tools, fixtures, and scripts to automate testing of various Industrial Electronics products at internal and external manufacturing and repair facilities. The salary rate for this role is currently $79300-113000 The actual salary offered to a candidate may be influenced by a variety of factors, such as: training, transferable skills, work experience, education, business needs, market demands and work location.
NewSAP Manufacturing Senior Manager PricewaterhouseCoopers LLPSAP Manufacturing Senior ManagerWashington, DC$124,000–$280,000 / yearp>PwC does not intend to hire experienced or entry level job seekers who will need, now or in the future, PwC sponsorship through the H-1B lottery, except as set forth within the following policy: https://pwc.to/H-1B-Lottery-Policy. As a SAP Manufacturing Senior Manager, you will specialize in providing consulting services for SAP supply chain and operations applications, enabling clients to optimize their supply chain processes and improve operational efficiency.
Manufacturing Project Manager Lockheed Martin CorpManufacturing Project ManagerSevern, MD$104,500–$184,115 / yearp>Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Manufacturing Engineer Ii The Kemtah Group, Inc.Manufacturing Engineer IiChantilly, VALocation: Chantilly, VA Zip Code: 20151 Start Date: Right Away Contract: 6 months Keywords: #ChantillyJobs; #ManufacturingEngineerJobs; Position Overview: As a Manufacturing Engineer in the Defense and Aerospace industry, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products. You will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives.
Additive Manufacturing Engineering Manager Strategic HR Client Job OpeningsAdditive Manufacturing Engineering ManagerFalls Church, VAThis role blends leadership, technical expertise, and operational ownership—guiding production while advancing the next generation of processes, systems, and capabilities. As the Additive Manufacturing Engineering Manager, you will lead both the strategic direction and day‑to‑day execution of our additive manufacturing operations.
Manufacturing Engineer II BelcanManufacturing Engineer IIChantilly, VAYou will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. Position Overview: As a Manufacturing Engineer in the Defense and Aerospace industry, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
Manufacturing Associate I, Wet Lab Operations Maravai LifeSciences Holdings IncManufacturing Associate I, Wet Lab OperationsSterling, VAp>Who we are: Maravai LifeSciences translates extraordinary science into everyday miracles, helping biotech, biopharma, and life sciences companies everywhere deliver novel vaccines, therapeutics, and diagnostics. We are global leaders in providing products and services within the fields of nucleic acid production and biologics safety testing to many of the world''s leading biopharma, vaccine, diagnostics, and cell and gene therapy companies.
Sr. Manager, Manufacturing Operations - Plasmids CatalentSr. Manager, Manufacturing Operations - PlasmidsHarmans, Marylandul>Master’s degree in a scientific, engineering, or biotechnology field with 6+ years’ experience in GMP manufacturing operations within biologics/biopharmaceuticals (plasmids, vaccines, microbial fermentation, or related) OR Bachelor’s degree in a scientific, engineering, or biotechnology field with 8–10+ years’ experience in GMP manufacturing operations within biologics/biopharmaceuticals (plasmids, vaccines, microbial fermentation, or related). Our FDA-licensed, state-of-the-art CGMP gene therapy campus in Harmans, MD—just minutes from BWI Airport—features EMA and FDA-approved manufacturing suites, fill/finish capabilities, labs, and warehousing to support Phase 3 through commercial production of advanced therapies, including AAV and other viral vector-based products.
Sr. Manager, Manufacturing Operations - Plasmids Catalent IncSr. Manager, Manufacturing Operations - PlasmidsMD$165,000–$185,000 / yearul>Master's degree in a scientific, engineering, or biotechnology field with 6+ years' experience in GMP manufacturing operations within biologics/biopharmaceuticals (plasmids, vaccines, microbial fermentation, or related) OR Bachelor's degree in a scientific, engineering, or biotechnology field with 8-10+ years' experience in GMP manufacturing operations within biologics/biopharmaceuticals (plasmids, vaccines, microbial fermentation, or related). Our FDA-licensed, state-of-the-art CGMP gene therapy campus in Harmans, MD-just minutes from BWI Airport-features EMA and FDA-approved manufacturing suites, fill/finish capabilities, labs, and warehousing to support Phase 3 through commercial production of advanced therapies, including AAV and other viral vector-based products.
Manufacturing Engineer II Belcan LLCManufacturing Engineer IIChantilly, VAp>Keywords: #ChantillyJobs; #ManufacturingEngineerJobs; Position Overview: As a Manufacturing Engineer in the Defense and Aerospace industry, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products. You will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives.
Maintenance Supervisor – Manufacturing – Union Aminov Search PartnersMaintenance Supervisor – Manufacturing – UnionBaltimore, MD$115,000–$115,000 / yearDrive continuous improvement efforts in partnership with technical personnel, targeting process enhancements, operational efficiency, and cost reduction. - Architect comprehensive maintenance strategies, emphasizing timely schedule adherence and equipment reliability to reduce downtime and boost efficiency.