291 Results for

Maintenance Machinist Jobs in Washington

Jobs

New!

Vancouver, WA3 days ago

$26–$40 Per Hour

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Our offerings support the movement, positioning, and management of diverse loads, helping customers address complex operational needs across multiple sectors.

Kent, WA28 days ago

p>US Wire Group is the parent of three independent companies (five manufacturing facilities) which produce steel wire and cable/wire related products that serve many industries.

Must be able to squat, stoop, twist, climb, crawl, reach, grasp, and fine manipulation, bend, operate foot controls, and work above shoulders occasional to constant.

New!

Bellingham, WAToday

li>Assist in the repair and remodel buildings; frames walls, rafters, and roofs; hangs, tapes, finishes, and paints interior sheet rock walls; installs counter tops; build custom fit cabinets, desks, bookcases, work tables, and benches; hang doors; paint interior and exterior surfaces; repairs concrete slabs and sidewalks .

Perform preventative maintenance and repairs on all types of mechanical equipment such as electrical drive motors, laundry, kitchen, and air-conditioning equipment; change oil, grease, change or clean filters, drive belts, sprockets, shafts, and bearings to ensure proper operation.

New!

Harstine, WA2 days ago

$30.71–$34.12 Per Hour

Requirements: TYPICAL QUALIFICATIONS: Knowledge of: applicable federal, state, and local laws, rules, and regulations; maintenance, routine servicing and repair of gasoline, diesel and alternative powered vehicles including buses, vans and automobiles; repair and maintenance of engines, transmissions, hydraulic systems, brakes, carburetors and fuel injection systems, electrical systems and drive trains; OSHA requirements for safe work practices; accident investigation techniques; equipment capabilities, limitations and safe operating characteristics. Teamwork Promote cooperation Clearly and effectively communicate with individuals and groups Keep supervisor, co-workers and subordinates informed Contribute to the team with ideas, suggestions and effort Refrain from gossiping Additionally, all employees of MTA are required to consistently demonstrate the following MTA core competencies: Inspirational Leadership, Informed Decision Making, Transparency & Accountability, Respectful Relationships, Personal Responsibility, and Outstanding Customer Service.

Kent, WA30+ days ago

$35.42–$42.97 Per Hour
Full-time
Employee

The Seattle Times, the Pulitzer Prize-winning news organization and premier commercial printing option in the Puget Sound, is hiring for a highly skilled Industrial Maintenance Mechanic to join the Print Operations team at our Kent facility. This position is best suited for an experienced mechanic who can work independently, diagnose complex issues, and contribute immediately to minimizing downtime in a high-volume operation.

Ferndale, WA30+ days ago

$26–$40 Per Hour
Full-time
Employee

Keyword Tags: Machinist, CNC, Waterjet, Press Breaks CNC & Manual, Rolling Equipment, Powder Coating, Walk in Sandblast, Glass Bead, 3 Axis CNC Mill, Manual Lathes & Mills, Material Processing Equipment, Custom Pallet Building, Rigging, CAD, TIG, Welding, Router, Marine Weldments, Corrosion Resistant, Food Processing, Agriculture, Equip, Structural & Architectural Construction, Energy Industry, Metal, Aluminum, Steel, Plywood, Iron, Stainless Steel, Abrasive Water Jet, Milling, Certified Welding, Fabrication, Contract Manufacturing, Assembly, Field Installation and Consultations, Process Engineering, Component Assembly. Our processes include CNC cutting (abrasive water jet, milling, routing, and turning), certified welding, fabrication, contract manufacturing, powder coating, glass beading, assembly, and field installation.

Tukwila, WA30+ days ago

Full-time
Employee

At the highest level, they are capable of setting up and running all site-specific CNC and conventional machines, designing and manufacturing complex tooling, and mentoring junior machinists while contributing to continuous improvement initiatives. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.

Tukwila, WA30+ days ago

Full-time
Employee

Tukwila, WA30+ days ago

Full-time
Employee

Walla Walla, WA24 days ago

$29.90–$41.47 Per Hour
Full-time
Employee

Nelson Irrigation Corporation designs and manufactures innovative sprinklers and irrigation equipment used worldwide in center pivot, solid set, and drip irrigation systems across field crops, row crops, orchards, and vineyards. The Tool Room Machinist is responsible for manufacturing, repairing, and maintaining precision tooling and mechanical components using manual and CNC machine tools.

Tukwila, WA30+ days ago

Full-time
Employee

In addition to production machining, this role may support prototyping and proto shop activities, requiring the ability to interpret raw engineering sketches or blueprints and fabricate functional components from scratch-often without established CNC programs or pre-set tooling. Demonstrate advanced manual lathe expertise, including independently setting up, operating, and troubleshooting manual machines for turning, facing, threading, and precision finishing.

Bellingham, WA27 days ago

$20–$20 Per Hour
Full-time
Employee

About Express Employment Professionals: When you choose Express Employment Professionals for your employment search, you gain access to a network of top local companies and the support of our experience in hiring professionals who specialize in recruiting. Your education, skills, and experience are matched with the short-term, contract, and full-time positions our client companies have hired Express to recruit for.

Sedro Woolley, WA25 days ago

$22–$45 Per Hour
Full-time
Employee

Additionally, because of Janicki’s work on aerospace products and the high volume of safety sensitive positions, Janicki takes the safety of its employees very seriously and requires that employees pass a preemployment drug test prior to starting employment. As a federal government contractor and a recipient of federal funding, Janicki is required to abide by federal drug testing requirements (including preemployment drug testing for cannabis).

Sedro Woolley, WA25 days ago

$20–$45 Per Hour
Full-time
Employee

Woodmont Beach, WA30+ days ago

$32–$36.68 Per Hour
Full-time
Employee

Since 1946 Pacific Propeller has been providing global repair and overhaul services to regional aircraft, as well as many of the world’s military operators of large transport propeller aircraft. Clients throughout the world count on us because they know they receive superior expertise, honest scheduling and unsurpassed reliability in propeller support.

Richland, WA30+ days ago

$28–$31.25 Per Hour
Full-time
Employee

From our facilities in Virginia, Washington, North Carolina, Pennsylvania, Massachusetts and beyond, we deliver outage services, advanced nuclear fuel technologies, and next-gen reactor innovations that keep the lights on. Health & Wellness: Multiple medical plan options, dental & vision coverage, life insurance, long- and short-term disability, and optional supplemental plans (critical illness, accident, hospital indemnity, dependent life).

Everett, WA30+ days ago

$80,000–$100,000 Per Year
Full-time
Employee

Our client is in need of a skilled machinist with around 2 to 4 years CNC machine experience who knows how to effectively use Siemens NX or equivalent CAD software to augment the machining process. Knowledge of machining materials such as aluminum, tool, alloy, carbon steels, stainless steel, Turning - Cincinnati Milacron 12 x 39.7.

Spokane Valley, WA30+ days ago

$26.96–$34.24 Per Hour
Full-time
Employee

Programs mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.

Chehalis, WA30+ days ago

$28.75–$33.75 Per Hour
Full-time
Employee

All interested parties need to submit a resume to the Human Resource Department at National Frozen Foods Corporation on 188 Sturdevant Road, Chehalis, Washington or via che.hr@nffc.com. National Frozen Foods Corporation in Chehalis, Washington is eager to hire someone who has experience and/or education to provide support in our Maintenance department.

Burlington, WA30+ days ago

$35.43–$40.79 Per Hour
Full-time
Employee

Hexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.

Burlington, WA30+ days ago

$35.43–$40.79 Per Hour
Full-time
Employee

Burlington, WA30+ days ago

$35.43–$40.79 Per Hour
Full-time
Employee

Burlington, WA30+ days ago

$35.43–$40.79 Per Hour
Full-time
Employee

Burlington, WA30+ days ago

$35.43–$40.79 Per Hour
Full-time
Employee

Pullman, WA30+ days ago

$5,011–$5,812 Per Month
Full-time
Employee

Background Check: This position has been designated by the department to require a background check because it requires access to children or vulnerable adults as defined by https://apps.leg.wa.gov/rcw/default.aspx?cite=74.34, engages in law enforcement, requires security clearance, interacts with WSU students in a counseling or advising capacity, has access to personal identifying and/or financial information, unsupervised access to university buildings/property, or other business-related need. To request disability accommodation in the application process, contact Human Resource Services: 509-335-4521 (v), Washington State TDD Relay Service: Voice Callers: 1-800-833-6384; TDD Callers: 1-800-833-6388, 509-335-1259(f), or https://hrs@wsu.edu.

Liberty Park, WA27 days ago

$5,011–$5,812 Per Month
Full-time
Employee

Union Gap, WA23 days ago

$18–$25 Per Hour
Full-time
Employee

We are willing to train however, you must have basic mechanical aptitud and repair knowledge. Wage depending on experience, benefits after 6 months, 3 month trial period.

Vancouver, WA30+ days ago

$5,501–$6,384 Per Month
Full-time
Employee

Information regarding crime prevention advice, the authority of the Security/Safety Department, policies concerning reporting of any crimes which may occur on or near college property, and crime statistics for the most recent 3-year period may be requested from the Clark College Security/Safety Department, (360) 992-2133 or security.requests@clark.edu. Clark College’s Office of People and Culture supports individuals with their academic, personal, and professional development, as well as provides training and educational resources for all members of the college community around diversity, inclusion, power, privilege, inequity, social equity, and social justice.

WALLA WALLA, WA30+ days ago

$56,880–$64,440 Per Year
Full-time
Employee

Carpentry: Prepare and finish or refinish woodwork and cabinets, build interior metal stud walls, hang and finish sheetrock, install wooden and metal framed doors, layout and install carpet squares and floor tiles, layout and build complete structures from plans, etc. If you need accommodations in the application/employment process, please contact the Human Resources Office at (509) 527-4224 - TDD (509) 527-4412, email personnel@wwcc.edu, address: 500 Tausick Way, Walla Walla WA, 99362.

Fife, WA30+ days ago

Full-time
Employee

What your day-to-day will look like: Monitor and maintain refrigeration, air conditioning, heating, ventilation, and electrical equipment while reviewing operational logs to ensure proper equipment function and reporting any malfunctions immediately. You'll play a critical role in ensuring building engineering systems perform their intended functions, continuously evaluating and improving maintenance, operations, and reliability methods to maximize performance and value for JLL's clients.

Kent, WA30+ days ago

Full-time
Employee

Complete a formal training or apprenticeship program in a related field such as mechanical, facilities (carpentry, plumbing and HVAC), electrical, electronic, pneumatic, or hydraulic systems or have equivalent experience.* Requires general knowledge of codes and regulations related to equipment and facilities.* * Scheduled performance reviews* Referral programJob Description:The Maintenance Mechanic is responsible for the installation, repair, and ongoing maintenance of production and manufacturing equipment to ensure optimal performance and minimal downtime.

Renton, WA24 days ago

$30.50–$39.90 Per Hour
Full-time
Employee

Pay ranges may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Anacortes, WA30+ days ago

Full-time
Employee

Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long periods of time, up to 12 hours a day.

Fife, WA21 days ago

$25–$30 Per Hour
Full-time
Employee

Use hand and power tools to perform basic fabrication and carpentry, electrical, pneumatic, mechanical, air conditioning, and plumbing repairs on production equipment, machinery, and facility. Troubleshoot and repair industrial manufacturing equipment and systems Including: Electrical Systems: Strong Electrical Systems Background, High/Low Voltage Distribution, Control Circuits and Data/Signal.

North Bonneville, WA30+ days ago

$22–$27 Per Hour
Full-time
Employee

The ideal candidate will have a strong mechanical background, excellent problem-solving skills, and the ability to work independently as well as part of a team. This role is essential for ensuring the smooth operation of our facilities through effective maintenance and repair of equipment and systems.

Everett, WA27 days ago

$28.28–$32.13 Per Hour
Full-time
Employee

Summary: The Maintenance Mechanic troubleshoots, repairs and maintains machinery and mechanical and electrical equipment (24v, 120, 240, 480v) such as motors, vacuum pumps, metal detectors, pneumatic tools, conveyor systems, gearboxes, hydraulic systems, and production equipment by performing the following duties. Acquires knowledge of Trident’s Environmental and Safety Policies by completing required training programs and performing designated work activities in accordance with training and procedures/work instructions.

Spokane, WA30+ days ago

Full-time
Employee

Stand or Sit(Stationary position), Walk(Move, Traverse), Use hand/fingers to handle or feel (Operate, Activate, Use, Prepare, Inspect, Place, Detect, Position), Climb (stairs/ladders) or balance (Ascend/Descend, Work atop, Traverse), Stoop, kneel, crouch, or Crawl(Position self(to), Move), Talk/hear(Communicate, Detect, Converse with, Discern, Convey, Express oneself, Exchange information), See (Detect, Determine, Perceive, Identify, Recognize, Judge, Observe, Inspect, Estimate, Assess), Pushing or Pulling, Reaching, Repetitive Motion. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day.

Seattle, WA23 days ago

$46.94–$46.94 Per Hour
Full-time
Employee

23410 HEATING, VENTILATION, AND AIR-CONDITIONING MECHANIC The Heating, Ventilation, and Air-Conditioning Mechanic installs, services and repairs environmental-control systems in residences, department stores, office buildings, and other commercial establishments, utilizing knowledge of refrigeration theory, pipe-fitting and structural layout, mounts compressor and condenser units on platform or floor, using hand tools, following blueprints or engineering specifications, fabricates, assembles and installs duct-work and chassis parts, using portable metalworking tools and welding equipment, and installs evaporator unit in chassis or in air-duct system, using hand tools. This mechanic observes pressure and vacuum gauges and adjusts controls to insure proper operation, tests joints and connections for gas leaks, using gauges or soap-and-water solution, wraps pipes in insulation batting and secures them in place with cement or wire bands, replaces defective breaker controls, thermostats, switches, fuses and electrical wiring to repair installed units, may install, repair and service air conditioners, ranging from fifteen to twenty tons cooling capacity in warehouses and small factory buildings.

Warden, WA30+ days ago

$20–$28 Per Hour
Full-time
Employee

Duties: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Maintain and repair building and equipment such as Raymond Lifts: Battery station; Freezer door, Evaporators; Dock Levelers; high speed electric freezer panel doors; DC/AC Motors.

Algona, WA30+ days ago

$31.41–$35.23 Per Hour
Full-time
Employee

Troubleshoots and repairs manufacturing equipment (motor controls, DC/AC drives and controls, frying equipment, temperature instrumentation, burner systems and controls, packaging machines, electronic scales, programmable logic controllers, weld aluminum, mild, or stainless steel using Mig or Tig). Utz Quality Foods is looking to grow our loyal, career driven, and customer focused team, and are currently recruiting for an Electrical/Mechanical Maintenance Person to join our team of manufacturing professionals at our Algona, WA facility on our Week Night Shift.

South Hill, WA21 days ago

$27.35–$36.23 Per Hour
Full-time
Employee

Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit resume to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit resume into this career site to be eligible for placement fees. This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner.

Auburn, Washington14 days ago

p/>

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. The Boeing Company

Boeing Commercial Airlines is excited to offer opportunities for a Maintenance Machinist to join our Equipment Services team in various locations across Washington State.

Ellensburg, WA30+ days ago

$25–$31 Per Year
Full-time
Employee

Performs minor electrical tasks such as resetting circuit breakers, replacing 110v-220v outlets, changing light bulbs and globes, repairing light fixtures and outdoor lighting systems, switches, outlets, thermostats, timers, baseboard heaters, motors, pumps, etc. Requires the ability to read and understand technical documentation such as blueprints, architectural drawings, etc. to compose and prepare general and technical documentation including bid specifications, required reports, etc. and to calculate and understand advanced mathematical calculations such as bid and materials costs, construction draws, budgetary considerations and implications, etc.

Anacortes, WA30+ days ago

Full-time
Employee

Vancouver, WA30+ days ago

Full-time
Employee

As a Koch company and a leading manufacturer of bath tissue, paper towels, paper-based packaging, cellulose, specialty fibers, building products and much more, Georgia-Pacific works to meet evolving needs of customers worldwide with quality products. Perform tasks such as lifting, walking, climbing, stooping, standing, pushing and/or pulling for up to 12 hours/day in a loud/noisy, hot, humid, dusty, greasy, and high-volume environment.

Walla Walla, WA30+ days ago

$80,000–$155,000 Per Year
Full-time
Employee

Nelson Irrigation Corporation designs and manufactures innovative sprinklers and irrigation equipment used worldwide in center pivot, solid set, and drip irrigation systems across field crops, row crops, orchards, and vineyards. This role works cross-functionally with product design engineers, Quality Assurance, and operations teams to ensure seamless product launches and continuous process improvement.

Everett, WA9 days ago

li>

Occasionally provide relief for Inside Machinist in building custom components will lathe, milling, drilling, and molding operations, including small and large assembly, machining of steel, alloys, and ship assemblies to blueprint specifications using conventional lathes, mills, and grinders. Founded in 2019, Everett Ship Repair offers vast ship repair capabilities from its facility in Everett, Washington, including repair, maintenance, and conversion services for any type of commercial vessels, with focus on commercial workboats and passenger vessels.

Centralia, WA30+ days ago

company is a high quality, high precision, production machine shop manufacturing firearms and. firearm components in aluminum and hard metals utilizing industry leading manufacturing.

Everett, Washington30+ days ago

li>

7+ years’ total experience in manufacturing environment with at least 5+ years CNC machinist experience, preferably with 3 and 5 axis machines, including ability to program, setup and operate machine tools; CNC milling machine, CNC cutting, as well as conventional machines  .

Everett, WA15 days ago

In partnership with Human Resources and with NBBB management, oversee use of temporary contingent labor supply and loaned employees mobilized from NBBB, including, collaborative and efficient cross-yard supply of labor between ESR and NBBB, subcontractor and staffing agency labor, including source selection. Founded in 2019, Everett Ship Repair offers vast ship repair capabilities from its facility in Everett, Washington, including repair, maintenance, and conversion services for any type of commercial vessels, with focus on commercial workboats and passenger vessels.

Stand out to leading employers.

Upload your resume and let employers find you for new Maintenance Machinist job openings. Plus, receive relevant job matches delivered straight to your inbox.

Create A Free Account

Maintenance Machinist Jobs in Washington

CNC Machinist Jobot

Maintenance Mechanic - 2nd or 3rd Shift Davis Wire Corporation

Building Maintenance Lead Bellingham Technical College

Mechanic MASON TRANSIT AUTHORITY

Industrial Maintenance Mechanic (Machinist) The Seattle Times

CNC Machinist Operator 4/10s Whatcom Ferndale Bellingham Industrial Design & Equipment

CNC Machinist-Swing Shift Primus International LLC

CNC Machinist Primus International LLC

CNC Machinist-Day Shift Primus International LLC

Tool Room Machinist Nelson Irrigation Corporation

CNC Machinist- Day Shift Primus International LLC

CNC Machinist needed for growing company in Bellingham! Temporary Position with Long-term Potential! Express Employment Professionals

Machinist Janicki Industries Inc.

Lathe Machinist, CNC Live Tooling Janicki Industries Inc.

Senior CNC Machinist - Aerospace Manufacturing Pacific Propeller International LLC

Machinist I - GROW Framatome

CNC Machinist Keltia Design

CNC Machinist ASC Machine Tools Inc

Industrial Maintenance National Frozen Foods Corporation

Maintenance Technician Hexcel Corporation

3rd Shift Maintenance Technician Hexcel Corporation

Maintenance Technician - 3rd Shift Hexcel Corporation

Maintenance Technician - 2nd Shift Hexcel Corporation

2nd Shift Maintenance Technician Hexcel Corporation

Maintenance Mechanic 2 Washington State University

Maintenance Mechanic 2 - HVAC Washington State University

Maintenance Mechanic Company Confidential

Maintenance Mechanic 4 - Electrician Clark College

Maintenance Mechanic 2 WALLA WALLA COMMUNITY COLLEGE

Lead Maintenance Mechanic JLL

Maintenance Mechanic Belcan Corp

Maintenance Mechanic II Sekisui Aerospace

Industrial Maintenance Mechanic Journeyperson Matrix Service

Industrial Equipment Maintenance Mechanic Gensco, Inc.

Industrial Maintenance Mechanic Silver Star Industries

MAINTENANCE MECHANIC Trident Seafoods Corporation

Warehouse Maintenance Mechanic (1st Shift, 6:00 am - 2:30 pm) AMI METALS, LLC

HVAC Mechanic (Facilities Maintenance) - Seattle WA Company Confidential

Maintenance Mechanic Greater Pacific Cold Storage LLC

Electrical Maintenance Mechanic - Night Shift Utz Brands

Preventative Maintenance Mechanic Niagara Bottling, LLC

Maintenance Machinist - 89709 Boeing

Maintenance Mechanic Lead Housing Authority for Kittitas County

Industrial Maintenance Mechanic Apprentice Matrix Service

Journeyman Millwright Georgia-Pacific

Manufacturing Engineer Nelson Irrigation Corporation

Outside Machinist Journeyman Everett Ship Service & Repair

Zev Technologies CNC Machinist SilencerCo

CNC Machinist - 4/5 Axis Allegion

MACHINIST SUPERVISOR ESR Everett Ship Repair LLC

Similar Job Searches