NewSenior General / Interdisciplinary Engineer Analyst DCS CorporationSenior General / Interdisciplinary Engineer AnalystOgden, UTAnalysis of Alternatives (AoA), Systems Engineering Plan (SEP)…), systems review and analysis with written reporting, briefing, and artifact development as required for all of the technical specialty areas defined in this section; and the planning and execution of all necessary technical reviews, assessments, and interchange meetings (e.g. Participate in integrated logistics support efforts, provisioning and source coding, maintenance data collection, technical order management, configuration management, evaluation of quality deficiency reports, and/or identification of alternate sources of supply for diminishing manufacturing/materiel sources preferred.
NewMaintenance Engineer Western States Lodging & ManagementMaintenance EngineerLayton, UTThe Davis Conference Center and Hilton Garden Inn in Layton, Utah are seeking an experienced Maintenance Engineer to assist in maintaining the physical condition, safety, and operational excellence of our property along with our other Maintenance Engineers and ChiefMaintenance. As the Maintenance Engineer, you will assist the Chief and fellow Maintenance workers to ensure all aspects of building and grounds maintenance, including repairs involving some aspects and troubleshooting of: HVAC .
NewMaintenance Engineer Davis Conference CenterMaintenance EngineerLayton, UTOur conference center is conveniently attached to the award-winning Hilton Garden Inn hotel in order to serve both our local guests and those coming from further away. Physical ability to lift 50+ pounds, climb ladders, work at heights, and work outdoors in all kinds of weather conditions (wind, rain, heat, cold, etc.) .
Design Engineer / Principal Design Engineer CSA - Civil Engineer 17704 Northrop Grumman CorpDesign Engineer / Principal Design Engineer CSA - Civil Engineer 17704Roy, UTSupporting structured trade studies to evaluate alternative design solutions to resolve technical issues Supporting structured trade studies to evaluate alternative design solutions to resolve technical issues. Basic Qualifications: • Design Engineer: Bachelor''s degree with 2 years' experience; 0 years' experience with a Master's degree Design Engineer: Bachelor''s degree with 2 years' experience; 0 years' experience with a Master's degree.
Preventative Maintenance-Hotel - $22 per hour StudioRes by Marriott Clearfield Concord Hospitality Enterprises CoPreventative Maintenance-Hotel - $22 per hour StudioRes by Marriott ClearfieldClearfield, UTThe maintenance person will be responsible for performing a variety of tasks, including electrical and plumbing repairs, HVAC maintenance, and general upkeep of the facility. We are seeking a skilled and reliable maintenance person to join our team and provide maintenance and repair services to our facility.
Preventative Maintenance-Hotel - $22 per hour StudioRes by Marriott Clearfield SDR ClearfieldPreventative Maintenance-Hotel - $22 per hour StudioRes by Marriott ClearfieldClearfield, UT$22 / hourPart timeThe maintenance person will be responsible for performing a variety of tasks, including electrical and plumbing repairs, HVAC maintenance, and general upkeep of the facility. We are seeking a skilled and reliable maintenance person to join our team and provide maintenance and repair services to our facility.
Preventative Maintenance-Hotel - $22 per hour StudioRes by Marriott SLC-Clearfield SDR ClearfieldPreventative Maintenance-Hotel - $22 per hour StudioRes by Marriott SLC-ClearfieldClearfield, UT$22 / hourPart timeThe maintenance person will be responsible for performing a variety of tasks, including electrical and plumbing repairs, HVAC maintenance, and general upkeep of the facility. We are seeking a skilled and reliable maintenance person to join our team and provide maintenance and repair services to our facility.
Maintenance Technician APG WestMaintenance TechnicianNorth Salt Lake, UT$26–$40 / hourOur portfolio of brands includes Oldcastle APG, Oldcastle Infrastructure, Belgard® hardscape, Echelon® Masonry, RDI® railing, Catalyst™ Fence Solutions, Sakrete® packaged concrete, Amerimix® mortar, Pebble Technology International® pool finishes, and Techniseal® sands and sealant technologies. We're a trusted and strategic partner to engineers, contractors, distributors, specifiers, retailers, and homeowners alike as the manufacturer of precast concrete, polymer concrete, and plastic infrastructure products.
Manufacturing Maintenance Technician Marmon Holdings IncManufacturing Maintenance TechnicianOgden, UTThe Maintenance Technician installs, maintains, troubleshoots, and repairs unique legacy as well as modern manufacturing equipment, heavy machinery, conveyors, material handling, extruders, pumps, electrical systems, and control panels. Ensuring quality, reliable products while creating new additions to our product lines to support the electrical experts within building construction, maintenance, and remodeling as well as homeowners across the United States.
Manufacturing Maintenance Technician Night Shift 2-2-3 Rotation Marmon Holdings IncManufacturing Maintenance Technician Night Shift 2-2-3 RotationOgden, UTThe Maintenance Technician installs, maintains, troubleshoots, and repairs unique legacy as well as modern manufacturing equipment, heavy machinery, conveyors, material handling, extruders, pumps, electrical systems, and control panels. Ensuring quality, reliable products while creating new additions to our product lines to support the electrical experts within building construction, maintenance, and remodeling as well as homeowners across the United States.
Maintenance Technician Alsco IncMaintenance TechnicianOgden, UTTypical Physical Activity: Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds.
Maintenance Technician CRH PlcMaintenance TechnicianNorth Salt Lake, UT$26–$40 / hourOur portfolio of brands includes Oldcastle APG, Oldcastle Infrastructure, Belgard hardscape, Echelon Masonry, RDI railing, Catalyst Fence Solutions, Sakrete packaged concrete, Amerimix mortar, Pebble Technology International pool finishes, and Techniseal sands and sealant technologies. Were a trusted and strategic partner to engineers, contractors, distributors, specifiers, retailers, and homeowners alike as the manufacturer of precast concrete, polymer concrete, and plastic infrastructure products.
Airport Civil Construction Engineer Salt Lake City CorpAirport Civil Construction EngineerUT$114,750–$135,498 / yearServes as the Owner's on-site engineering representative during construction, with a primary responsibility for field-based coordination, technical interpretation, and resolution of construction-phase issues, including review of RFIs, submittals, and field conditions for alignment with design intent, constructability, and operational impacts. Job Description: As a registered Professional Engineer (PE), Certified Construction Manager (CCM), or Project Management Professional (PMP), serves as the Owner's field-based Civil Construction Engineer for complex airport capital improvement projects, with a primary focus on construction-phase execution.
NewSenior Electrical Engineer Edgewater Technical AssociatesSenior Electrical EngineerOgden, UtahEdgewater has a proven track record and is a trusted provider of fixed-price construction projects, engineering, and technical services for the Department of Energy (DOE), National Nuclear Regulatory Commission (NRC), Canadian Commercial Nuclear Industry, and private sector commercial contractors involved in nuclear, high-hazard, or complex operations. Founded in 2003, Edgewater Technical Associates, LLC (Edgewater) is a New Mexico-based small business headquartered in Los Alamos, NM, with five (5) regional offices across the United States to locally support our growing presence at project sites.
NewSenior Mechanical Fire Protection Engineer GAS Global ServicesSenior Mechanical Fire Protection EngineerOgden, UT$58.60–$126.70 / hourThis role develops calculations, construction drawings, Fire Protection Design Analysis Reports (FPDAR), tailored Unified Facilities Guide Specifications (UFGS), requisition specifications, reviews and approves subcontractor submittals, and assists with determining needed changes and final testing. Mechanical Fire Protection Engineer will prepare design and procurement documents relating to Fire Protection and provide technical leadership in the design and development of fire protection systems and equipment for the Sentinel project.
Manufacturing Maintenance Technician Night Shift 2-2-3 Rotation Marmon HoldingsManufacturing Maintenance Technician Night Shift 2-2-3 RotationOgden, UtahThe Maintenance Technician installs, maintains, troubleshoots, and repairs unique legacy as well as modern manufacturing equipment, heavy machinery, conveyors, material handling, extruders, pumps, electrical systems, and control panels. Ensuring quality, reliable products while creating new additions to our product lines to support the electrical experts within building construction, maintenance, and remodeling as well as homeowners across the United States.
Electrical Reliability Engineer Linde plcElectrical Reliability EngineerUTFurther, you will act as primary technical resource for low, medium, and high voltage electrical distribution equipment including switchgear, transformers, synchronous motors, and induction motors. And you will develop and execute small electrical projects (Plan long term corrective actions for electrical reliability threats and aging infrastructure.
NewAvionics & Electrical Systems Engineer Breeze Aviation Group IncAvionics & Electrical Systems EngineerSalt Lake City, UTThe Avionics and Electrical systems Engineer is responsible for developing repairs and alterations, defining maintenance specifications, evaluating new avionics technologies, and the technical airworthiness management of aircraft avionics, electrical systems, and related components on the Airbus and Embraer aircraft. Prepare engineering documents such as Engineering Orders (EO) to provide technical dispositions for repairs, modifications, inspections, or other maintenance actions on aircraft avionics/electrical systems and components, which provide benefits in accordance with Breeze objectives.
(DoD Skillbridge)Principal/ Engineer Technical Services-16029 Northrop Grumman Corp(DoD Skillbridge)Principal/ Engineer Technical Services-16029Roy, UT$70,200–$105,400 / yearDoD SkillBridge Eligibility: · Has served at least 180 days on active duty · Is within 12 months of separation or retirement · Will receive an honorable discharge · Has taken any service TAPS/TGPS · Has attended or participated in an ethics brief within the last 12 months · Received Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of internship. Responsibilities May Include: • Review of Electromagnetic Interference and Compatibility (EMI/EMC) test plans and test procedures (EMITP) to meet Data Item Descriptions (DID) requirements • Review Qualification & Pre-Qualification EMI Test Plans/Procedures (EMITP) • Support EMI/EMC test planning, Test Readiness Reviews (TRR) and test integration support.
Sr Principal Mission Assurance Engineer - 18702 Northrop Grumman CorpSr Principal Mission Assurance Engineer - 18702Clearfield, UT$122,800–$184,200 / yearThe above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation''s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon.
Project Engineer Bechtel CorpProject EngineerOgden, UTExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world''s infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. A major contractor for the United States and allied governments, Bechtel has handled such efforts as chemical weapons demilitarization projects, missile-defense, infrastructure, base operations, procurement and project management, and restoration and recovery spanning half a century.
Electrical Engineer- Generation PacifiCorpElectrical Engineer- GenerationSALT LAKE CITY, UT$88,000–$150,800 / yearDevelop moderately complex electrical engineering studies, plans, specifications, calculations, evaluations, design documents, and Determine methods and techniques for obtaining results. Under limited direction be responsible for overseeing the specification, design, and maintenance of the following thermal generation electrical equipment: Generator Step Up, Startup, and Auxiliary Transformers.
Senior General Interdisciplinary Engineer Torch Technologies IncSenior General Interdisciplinary EngineerUTConduct systems architectural analyses to include system design/design feasibility and state-of-the-art assessment to Produce architectures, document planned and existing systems, determine deficiencies, develop alternatives, recommend solutions, and support development of a plan to implement the chosen solution per acquisition and sustainment system engineering processes. Analysis of Alternatives (AoA), Systems Engineering Plan (SEP)…), systems review and analysis with written reporting, briefing, and artifact development as required for all of the technical specialty areas defined in this section; and the planning and execution of all necessary technical reviews, assessments, and interchange meetings (e.g.
Senior Mechanical Fire Protection Engineer (DOD Project) Johnson Service GroupSenior Mechanical Fire Protection Engineer (DOD Project)Ogden, UTSupport the development and maintenance of the Fire Protection Design Analysis Report (FPDAR) for the facilities utilizing recognized fire protection industry approaches, methodologies, calculations, and analyses. This program is modernizing the ground-based leg of the U.S. nuclear deterrent triad, including intercontinental ballistic missile (ICBM) systems and launch infrastructure.
Principal/Sr Principal Manufacturing Engineer Level 3/4 Northrop Grumman CorpPrincipal/Sr Principal Manufacturing Engineer Level 3/4Clearfield, UT$84,700–$127,100 / yearBasic Qualifications: Principal Manufacturing Engineer (Level 3): Bachelor's degree in a STEM field (Science, Technology, Engineering or Math) and 4 year or experience in the following engineering fields; Manufacturing, Quality, Production, Industrial, Process, Mechanical, Aerospace, Aeronautics OR Masters in STEM with 3 years of experience OR PhD in STEM with 0 years of experience. Principal Manufacturing Engineer (Level 4): Bachelor's degree in a STEM field (Science, Technology, Engineering or Math) and 8 year or experience in the following engineering fields; Manufacturing, Quality, Production, Industrial, Process, Mechanical, Aerospace, Aeronautics OR Masters in STEM with 6 years of experience OR PhD in STEM with 4 years of experience.
Automation Engineer PEAK Technical Services Inc.Automation EngineerOgden, UT$85,000–$110,000 / yearBuild prototypes and proof-of-concepts for new tools, systems, and technologies Collaborate with cross-functional teams (engineering, product, operations) to identify automation opportunities. Success in this position requires strong technical problem-solving skills, the ability to optimize and maintain automation systems, and effective communication with leadership regarding project progress and results.
Mechanical Fire Protection Engineer Bechtel CorpMechanical Fire Protection EngineerOgden, UTExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world''s infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. You will develop calculations, construction drawings, Fire Protection Design Analysis Reports (FPDAR), tailored Unified Facilities Guide Specifications (UFGS), requisition specifications, review and approve sub-contractors' submittals, and assist in determining needed changes and with final testing.
Mechanical Fire Protection Engineer GAS Global ServicesMechanical Fire Protection EngineerOgden, UT$43.50–$94.03 / hourYou will develop calculations, construction drawings, Fire Protection Design Analysis Reports (FPDAR), tailored Unified Facilities Guide Specifications (UFGS), requisition specifications, review and approve sub-contractors’ submittals, and assist in determining needed changes and with final testing. In this role, you will prepare design and procurement documents relating to Fire Protection and provide technical leadership in the design and development of fire protection systems and equipment for the Sentinel project.
Principal / Sr. Principal Facilities Engineer - Level 3 or 4 (C-Shift) Northrop Grumman CorpPrincipal / Sr. Principal Facilities Engineer - Level 3 or 4 (C-Shift)Clearfield, UT$89,400–$134,200 / yearBasic Qualifications for Senior Principal Facilities Engineer (Level 4): Bachelor's Degree in STEM discipline (Science, Technology, Engineering & Math) with 8 years of Engineering experience in the following engineering fields: Power Systems, Power, Electrical, Electronics, Construction, Mechanical Design, Engineering, Design, Facilities, Operations, Aerospace, Control OR Master's degree in STEM with 6 years of experience in mentioned fields OR PhD in STEM with 3 year of experience in mentioned fields. This position may be filled as either the level 3 or the level 4 depending on qualifications below: Basic Qualifications for Principal Facilities Engineer (Level 3): Bachelor's Degree in STEM discipline (Science, Technology, Engineering & Math) with 5 years of Engineering experience in the following engineering fields: Power Systems, Power, Electrical, Electronics, Construction, Mechanical Design, Engineering, Design, Facilities, Operations, Aerospace, Control OR a Master's degree in STEM with 3 years of experience in mentioned fields.
Principal / Sr. Principal Facilities Engineer - Level 3 or 4 Northrop Grumman CorpPrincipal / Sr. Principal Facilities Engineer - Level 3 or 4Clearfield, UT$89,400–$134,200 / yearBasic Qualifications for Senior Principal Facilities Engineer (Level 4): Bachelor's Degree in STEM discipline (Science, Technology, Engineering & Math) with 8 years of Engineering experience in the following engineering fields: Power Systems, Power, Electrical, Electronics, Construction, Mechanical Design, Engineering, Design, Facilities, Operations, Aerospace, Control OR Master's degree in STEM with 6 years of experience in mentioned fields OR PhD in STEM with 3 year of experience in mentioned fields. This position may be filled as either the level 3 or the level 4 depending on qualifications below: Basic Qualifications for Principal Facilities Engineer (Level 3): Bachelor's Degree in STEM discipline (Science, Technology, Engineering & Math) with 5 years of Engineering experience in the following engineering fields: Power Systems, Power, Electrical, Electronics, Construction, Mechanical Design, Engineering, Design, Facilities, Operations, Aerospace, Control OR a Master's degree in STEM with 3 years of experience in mentioned fields.
Senior General / Interdisciplinary Engineer Odyssey Systems Consulting Group, Ltd.Senior General / Interdisciplinary EngineerOgden, UtahFull timeConduct systems architectural analyses to include system design/design feasibility and state-of-the-art assessment to Produce architectures, document planned and existing systems, determine deficiencies, develop alternatives, recommend solutions, and support development of a plan to implement the chosen solution per acquisition and sustainment system engineering processes. Analysis of Alternatives (AoA), Systems Engineering Plan (SEP)…), systems review and analysis with written reporting, briefing, and artifact development as required for all of the technical specialty areas defined in this section; and the planning and execution of all necessary technical reviews, assessments, and interchange meetings (e.g.
Ethernet Network Engineer Viranim Technical SolutionsEthernet Network EngineerClearfield, UTFull timeAs an Ethernet Network Engineer supporting avionics modifications, you will perform tasks across the full lifecycle-design, development, testing, fielding, and sustainment-of weapon systems. Technical Proficiency: Proven experience with high-speed Ethernet networking, including design, implementation, and troubleshooting in high-performance environments.
Structural Engineer BAE Systems PlcStructural EngineerUT$88,189–$149,922 / yearAbout BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. The area offers an incredible range of outdoors pursuits across the seasons including hiking, climbing, hunting, fishing, camping, boating, mountain biking, and world-class skiing at resorts that hosted the 2002 Winter Olympics and is favorably positioned to host the 2034 event.
Sentinel - Principal/ Electrical Test Engineer - 16763 Northrop Grumman CorpSentinel - Principal/ Electrical Test Engineer - 16763Roy, UT$79,300–$118,900 / yearAutomated Test experience (development and execution) • Experience with Siemens Capital cable design tools • Proficiency in DOORS and Cameo • Teamcenter/CPLM experience • Continuous Process Improvement experience • Knowledge of various data transmission formats (eg. Software and/or Hardware testing experience Preferred Qualifications: • A current DoD Secret or Top Secret/SCI level security clearance, to include a Single Scope Background Investigation, a periodic reinvestigation, or an original adjudication date completed within the last 6 years.
Automation Engineer PEAK Technical StaffingAutomation EngineerOgden, UTBuild prototypes and proof-of-concepts for new tools, systems, and technologies Collaborate with cross-functional teams (engineering, product, operations) to identify automation opportunities. Success in this position requires strong technical problem-solving skills, the ability to optimize and maintain automation systems, and effective communication with leadership regarding project progress and results.
Sentinel System Engineering and Integration (SE&I) Sr. Project Engineer The Aerospace CorpSentinel System Engineering and Integration (SE&I) Sr. Project EngineerUT$151,300–$226,900 / yearThe Sentinel SE&I Senior Project Engineer will actively participate in all phases of development with a focus of applying ICBM domain subject matter knowledge to develop Models-Based System Engineering (MBSE) tools and architectures and ensure system integration across nuclear command and control, communications, missile, facilities, specialized transportation vehicles, product support and multiple external agency interfaces to meet weapon system lifecycle requirements. DSG is unique at Aerospace as it not only directly supports major customers, including US Space Force, U.S Space Command, Air Force Material Command, and senior leadership at the Pentagon, but also provides a broad range of services and support across the national space enterprise, maintaining vertical responsibilities with customers but also horizontal, matrixed responsibilities across the corporation.
Facilities Engineer Autoliv IncFacilities EngineerBrigham City, UTIn this role you will be responsible for: • Plans, designs, and oversees the reconfiguration, maintenance, and alteration of equipment, machinery, buildings, structures, and other facilities. We are working to increase vehicle safety by developing seatbelts, airbags and steering wheels and you can be part of our team as Facilities Engineer.
NewTooling Engineer PETERSEN INCORPORATEDTooling EngineerOgden, UTThe ideal candidate is a handson engineer who works directly with the shop floor to develop solutions that are repeatable, efficient, and aligned with Lean manufacturing principles. We are seeking a Tooling Engineer to lead the design and development of tooling, fixturing, and workholding solutions that support machining and fabrication operations.
Associate/Engineer Tool Level 1/2 Northrop Grumman CorpAssociate/Engineer Tool Level 1/2Clearfield, UT$59,900–$89,900 / yearBachelors Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline and a minimum of 1 years of relevant engineering experience; or Masters Degree in STEM discipline and 0 years of engineering experience. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Associate/Tooling Engineer Level 1/2 Northrop Grumman CorpAssociate/Tooling Engineer Level 1/2Clearfield, UT$59,900–$89,900 / yearBachelors Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline and a minimum of 1 years of relevant engineering experience; or Masters Degree in STEM discipline and 0 years of engineering experience. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Sentinel Staff DevOps Engineer 18373 Northrop Grumman CorpSentinel Staff DevOps Engineer 18373Roy, UT$152,900–$229,300 / yearWhat you get to do: Assist with the design of, as well as configure and maintain, infrastructure and/or cloud resources necessary to reliably host, run, and support applications through all phases of the software development life cycle (SDLC). At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems in air and space that impact people's lives around the world today, and for generations to come.
Sentinel Staff Engineer DevOps-16406 Northrop Grumman CorpSentinel Staff Engineer DevOps-16406Roy, UT$152,900–$229,300 / yearParticipate as a stakeholder in the software engineering rigor processes to ensure SDE tasks and board submittal processes represent the desired end qualities of the SDE managerial and technical leadership. Directly support the SDE Architect by understanding the architecture, design, requirements, and execution details to be able to communicate the key elements to the Product Owners, Assignment Managers, Scrum masters, and element lead.
Sentinel - Sr. Staff Systems Test Engineer - 18942 Northrop Grumman CorpSentinel - Sr. Staff Systems Test Engineer - 18942Roy, UT$151,400–$227,000 / yearThis position will be part of our Aerospace Vehicle Equipment (AVE) On Board Test Equipment (OBTE) team to plan and execute vehicle level integration, test and checkout activities supporting Sentinel, formerly Ground Based Strategic Deterrent (GBSD), program. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
NewEngineer (Senior/Principal) PacifiCorpEngineer (Senior/Principal)SALT LAKE CITY, UT$102,000–$161,370 / yearAdditional Requirements: Senior Engineer: Five or more years of related experience; demonstrated expertise in equipment evaluation and project leadership; ability to support equipment failure investigations and apply root cause analysis methodologies. Provides engineering support throughout the equipment lifecycle including specification development, procurement, manufacturing oversight, factory inspections, commissioning support, equipment performance review, and failure investigations.
NewConductor/Engineer - SLGW Patriot Rail CareersConductor/Engineer - SLGWSalt Lake City, UtahTo always ensure compliance with all train orders, signals, and railroad rules and regulations for safety, operations, and the Federal Railroad Administration (FRA); To always review instructions from dispatchers and yardmasters, and discuss with locomotive engineer and train crew; To always inspect all equipment on cars prior to departures; To accurately receive and transmit information by radio and telephone; To accurately read and understand bulletins, work orders, and switch lists; To safely assist and instruct train crews to couple and uncouple cars, operate switches, and make minor repairs to railcars, including replacing heavy couplings or air brake hoses; To safely and professionally work with customers to ensure accurate movement and placement of cars; To always safely maintain awareness of surrounding area and suspicious activity to ensure rail safety; To comprehend color and/or hand signals and systems; To safely, quickly, and repeatedly make precise adjustments in moving the controls of a machine or vehicle to exact positions; To accurately and quickly respond (with the hand, finger, or foot) to visual symbols, signals and displays (sound, light, picture, etc.); To safely maintain responsibility for safe and efficient operation of the locomotive; To safely perform manipulation of throttle and brake controls as well as interpreting gauges and controls; To safely manipulate valves and switches both inside and outside of the cab; To safely and efficiently apply and release handbrakes; To safely ascend and descend steps and ladders to get on and off the equipment; To takes directions from conductors and brakemen; To safely line switches; To safely perform maintenance services to the locomotive (brake shoes, oil, sand and fuel); To always comply with all new and outstanding railroad instructions regarding the operation of the train. 18 years of age or older; Valid Driver's License; 2 years verifiable work experience and/or college; railroad industry experience strongly preferred; Must pass all required assessments; Must pass a background screening; SLGW employees will be subject to the Everifile background check and must acquire the ERailSafe Badge; Federal regulations require random testing for drugs and/or alcohol; No driving violations involving alcohol or drugs within the past 3 years; Knowledge of and skills in using hand tools, including wrenches, sockets, screwdrivers, measuring tapes, etc. and skills in using power tools and hydraulic equipment, including portable grinders, rail saws, spike pullers, track wrench machines, power drills; Prefer experience reading and comprehending safety manuals, operating and maintenance instructions, test materials, drawings, schematics, and procedure manuals; Must be able to meet physical requirements of the position; Position requires flexible work schedule and the need to work overtime on occasion; and.
Engineer Electrical - 16709 Northrop Grumman CorpEngineer Electrical - 16709Roy, UT$79,300–$118,900 / yearBasic Qualifications: Principal Electrical Engineer: Bachelor's degree in Science, Technology, Engineering, and Mathematics (STEM) with 5 years of experience; or Master's degree with 3 years of experience; or PhD with 0 years of experience. The candidate must be proficient in system‑level test execution, working with classified data and classified network hardware, and comfortable collaborating with other engineers to meet rigorous nuclear surety requirements.
Facilities Engineer Autoliv United StatesFacilities EngineerBrigham CityWhat you'll do: Plans, designs, and oversees the reconfiguration, maintenance, and alteration of equipment, machinery, buildings, structures, and other facilities. Inspects or directs the inspection of construction and installation progress to ensure conformance to established drawings, specifications, and schedules.
Sentinel Principal DevOps Engineer - 16399* Northrop Grumman CorpSentinel Principal DevOps Engineer - 16399*Roy, UT$98,400–$163,200 / yearBasic Qualifications: Principal DevOps Engineer: 5 Years experience with Bachelors Degree in relevant field of study; 3 Years with Masters; 1 Years with PhD; or 4 additional years of relevant experience in lieu of a degree. What You'll Get To Do: Assist with the design of, as well as configure and maintain, infrastructure and/or cloud resources necessary to reliably host, run, and support applications through all phases of the software development life cycle (SDLC).
Principal/Sr Principal Engineer Manufacturing Level 3/4 Northrop Grumman CorpPrincipal/Sr Principal Engineer Manufacturing Level 3/4Clearfield, UT$89,400–$134,200 / yearBasic Qualifications: Principal Manufacturing Engineer (Level 3): Bachelor's degree in a STEM field (Science, Technology, Engineering or Math) and 4 year or experience in the following engineering fields; Manufacturing, Quality, Production, Industrial, Process, Mechanical, Aerospace, Aeronautics OR Masters in STEM with 3 years of experience OR PhD in STEM with 0 years of experience. Principal Manufacturing Engineer (Level 4): Bachelor's degree in a STEM field (Science, Technology, Engineering or Math) and 8 year or experience in the following engineering fields; Manufacturing, Quality, Production, Industrial, Process, Mechanical, Aerospace, Aeronautics OR Masters in STEM with 6 years of experience OR PhD in STEM with 4 years of experience.
Associate/Engineer Manufacturing Level 1/2 Northrop Grumman CorpAssociate/Engineer Manufacturing Level 1/2Clearfield, UT$59,900–$89,900 / yearBasic Qualifications: Manufacturing Engineer (Level 1): Bachelor's degree in a STEM field (Science, Technology, Engineering or Math) and 0 year or experience in the following engineering fields; Manufacturing, Quality, Production, Industrial, Process, Mechanical, Aerospace, Aeronautics OR Masters with 0 years of experience. Manufacturing Engineer (Level 2): Bachelor's degree in a STEM field (Science, Technology, Engineering or Math) and 1 year or experience in the following engineering fields; Manufacturing, Quality, Production, Industrial, Process, Mechanical, Aerospace, Aeronautics OR Masters in STEM with 0 years of experience.