Environmental Health and Safety Test Engineer True Anomaly IncEnvironmental Health and Safety Test EngineerLong Beach, CA$80,000–$100,000 / yearIn this role, you will perform safety reviews and test readiness assessments, develop and enforce safe work procedures for high-energy and hazardous material operations, lead incident investigations and corrective actions, interface with regulatory agencies and range safety authorities, and serve as the on-site safety authority during hazardous test operations. Working knowledge of hazardous material regulations including DOT 49 CFR, EPA RCRA, OSHA 29 CFR 1910/1926, California Health and Safety Code Division 20 (Hazardous Waste Control Law), EPA Resource Conservation and Recovery Act (RCRA) Regulations, and NFPA codes.
Project Controls Engineer Bechtel CorpProject Controls EngineerRiverside, CA$78,000–$119,000 / yearExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world''s infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. The project team helps RCTC to implement "Measure A", the Regional Transportation Plan (RTP) / Sustainable Communities Strategy (SCS) and adopted plans and programs in compliance with state and federal requirements with the goal of providing the residents of Riverside County greater mobility, improved quality of life, operational excellence, and economic vitality.
Substation Project Engineer David Evans and Associates IncSubstation Project EngineerTustin, CA$120,000–$150,000 / yearPotential office locations include: Los Angeles, CA; Ontario, CA; Santa Clarita, CA; Tustin, CA; Colorado Springs, CO; Denver, CO; Boise, ID; Coeur d''''Alene, ID; Pocatello, ID; Bend, OR; Corvallis, OR; Portland, OR; Salem, OR; Bryan/College Station, TX; Salt Lake City, UT; Bellevue, WA; Bellingham, WA; Everett, WA; Olympia, WA; Seattle, WA; Spokane, WA; Tacoma, WA; Vancouver, WA; Woodinville, WA; or Remote. Key Responsibilities: Create and oversee substation design deliverables from preliminary through IFC plan sets; deliverables may include but not limited to: one-line diagrams, schematics, wiring, general arrangements, conduit, grounding, equipment connection details, design criteria, equipment specifications, and construction specifications.
Entry Level Civil Engineer - Ports and Marine AECOMEntry Level Civil Engineer - Ports and MarineOrange, CA$67,137.93–$92,314.65 / yearWe invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.
Senior Plumbing Design Engineer PBS Engineers IncSenior Plumbing Design EngineerSan Dimas, CAThis role involves leading design projects, mentoring junior engineers and designers, and collaborating with cross-discipline teams to deliver innovative Plumbing solutions for various sectors including commercial, retail/hospitality, industrial, healthcare, aviation, transportation (rail/transit/ports), education, and civic/community. Ability to size equipment, perform calculations, and design plumbing systems including domestic hot and cold water, sanitary waste and vent, grease waste, storm drain, booster pumps, sewage ejectors, sump pumps, natural gas, compressed air, acid waste, medical gas, and basic fire protection.
Senior Electrical Engineer PBS Engineers IncSenior Electrical EngineerSan Dimas, CAThis role involves leading design projects, mentoring junior engineers and designers, and collaborating with cross-discipline teams to deliver innovative electrical engineering solutions across various sectors including commercial, retail/hospitality, industrial, healthcare, aviation, transportation (rail/transit/ports), education, and civic/community. Ability to work well under pressure, juggle multiple projects concurrently, and motivate multi-discipline project teams in meeting client needs in a timely manner and within budget objectives while maintaining accuracy and meeting deadlines.
Mid-Level Plumbing/Mechanical Engineer PBS Engineers IncMid-Level Plumbing/Mechanical EngineerCosta Mesa, CAThis role involves working on design projects, communicating with clients and architects, and collaborating with cross-discipline teams to deliver innovative Plumbing and HVAC solutions for various sectors including commercial, retail/hospitality, industrial, healthcare, aviation, transportation (rail/transit/ports), education, and civic/community. Ability to size equipment, perform calculations, and design plumbing systems including domestic hot and cold water, sanitary waste and vent, grease waste, storm drain, booster pumps, sewage ejectors, sump pumps, natural gas, compressed air, acid waste, medical gas, and basic fire protection.
Senior Project Engineer - Civil Land Development BKFSenior Project Engineer - Civil Land DevelopmentNewport Beach, CA$108,000–$149,000 / yearIn the event a recruiter or agency submits a resume or candidate without a previously signed agreement and a specific solicitation for the position or other approved engagement request for the position with BKF Engineers, BKF Engineers reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. This role spans multiple Bay Area locations and involves leading multidisciplinary teams through complex site development projects from concept to completion.
Principal Structural Engineer Rimkus Consulting Group IncPrincipal Structural EngineerIrvine, CA$130,100–$195,100 / yearPart timeDemonstrated team leadership experience (formal or informal) - preferred/strongly desired: Task leadership, mentoring, QA/QC reviews, and coordinating deliverables across disciplines. Our licensed engineers, architects, and technical specialists bring deep knowledge of regional requirements and industry best practices, enabling us to deliver customized, high-quality solutions that maximize the success of our clients’ investments.
Senior Field Application Engineer Cubic CorpSenior Field Application EngineerCACompany Details: When you join Cubic, you become part of a company that creates and delivers technology solutions in transportation to make people's lives easier by simplifying their daily journeys, and defense capabilities to help promote mission success and safety for those who serve their nation. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
Stationary Engineer - CA Licensed General Electrician License Required - SNA Airport Oshkosh Corp.Stationary Engineer - CA Licensed General Electrician License Required - SNA AirportSanta Ana, CAThe Stationary Engineer role is responsible for diagnosing, troubleshooting, repairing, and maintaining a variety of electromechanical systems including aircraft passenger boarding bridges, conveyor systems, PLC systems, scanners, sorters, pushers, and baggage makeup units (BMUs). However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Oshkosh Corporation's legal duty to furnish information.
General Engineer (Inspector) - DIRECT HIRE U.S. Department of TransportationGeneral Engineer (Inspector) - DIRECT HIREOntario, CA$74,678–$163,062 / yearSpecified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelors degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. COMBINATION OF EDUCATION AND EXPERIENCE -- College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
RF Systems Engineer II InversionRF Systems Engineer IIHawthorne, CA$106,000–$150,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Perform trade studies to evaluate, select, and qualify commercial off-the-shelf (COTS) and custom RF components, including transmitters, transceivers, Power Amplifiers (PAs), Low Noise Amplifiers (LNAs), and antennas.
RF Test Engineer II InversionRF Test Engineer IIHawthorne, CA$77,000–$116,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will help develop critical hardware and systems for cutting-edge maneuverable reentry vehicles - advancing one of the most capable reentry vehicle platforms ever developed.
Staff Flight Software Engineer, Arc Vehicle InversionStaff Flight Software Engineer, Arc VehicleHawthorne, CA$165,000–$236,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will own the flight software architecture end-to-end, solving unprecedented technical challenges at the intersection of embedded hardware, safety-critical control loops, and autonomous flight state machines.
Avionics Embedded Software Engineer II InversionAvionics Embedded Software Engineer IIHawthorne, CA$106,000–$150,000 / yearExperience with embedded operating systems (FreeRTOS, Zephyr, Embedded Linux) and embedded Linux build systems (Yocto/OpenEmbedded, Buildroot, PetaLinux), including development of custom Linux distributions, BSPs, and production image pipelines. Design and implement vehicle-wide communication architectures enabling reliable exchange of telemetry, commands, sensor data, and control information across distributed embedded computing platforms using DDS, CoAP, and other modern networking technologies.
Senior Applied AI Engineer InversionSenior Applied AI EngineerHawthorne, CA$139,000–$201,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will own the research, development, deployment, and iteration of AI systems that help teams across the company work faster and make better decisions, beginning with software engineering workflows and expanding to broader company-wide use cases.
Senior Avionics Test Engineer InversionSenior Avionics Test EngineerHawthorne, CA$137,000–$193,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will bridge the gap between design and flight readiness, developing bench tests, configuring complex Hardware-in-the-Loop (HIL) environments, and design-to-build electrical ground support equipment (GSE).
Senior Propulsion and Energetics Thermofluids Engineer InversionSenior Propulsion and Energetics Thermofluids EngineerHawthorne, CA$137,000–$193,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will design and develop the mechanical structures and devices to activate a vacuum system and its requisite heat exchanger systems for a high-energy test bed to expand Inversion's depth in hypersonic and reentry material testing.
Senior Antenna Engineer InversionSenior Antenna EngineerHawthorne, CA$161,000–$221,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will work within the Avionics team to develop high-performance antenna solutions for flight and ground applications, owning antenna development from requirements capture and EM simulation through prototyping, installed performance evaluation, and mission-readiness testing.
Senior Avionics Mechanical Engineer InversionSenior Avionics Mechanical EngineerHawthorne, CA$137,000–$193,000 / yearDevelop and execute comprehensive test campaigns including functional testing, environmental qualification (vibration, shock, thermal/thermal vacuum, EMI/EMC), life cycle testing, and acceptance testing. ITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Autonomy Engineer I, Arc Vehicle InversionAutonomy Engineer I, Arc VehicleHawthorne, CA$71,000–$124,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Working under the guidance of senior engineers, you will execute software-in-the-loop (SIL) and hardware-in-the-loop (HIL) simulations, debugging logic gates and verifying autonomous behaviors to prepare our vehicles for safe flight operations.
Senior Flight Software Engineer, Arc Vehicle InversionSenior Flight Software Engineer, Arc VehicleHawthorne, CA$139,000–$201,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Perform low-level driver development and board bring-up on flight hardware, debugging hardware-software interfaces using logic analyzers and oscilloscopes.
Ground Software Engineer II, Arc Vehicle InversionGround Software Engineer II, Arc VehicleHawthorne, CA$101,000–$160,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. In this role, you will build, integrate, and test the mission control software, real-time telemetry processing pipelines, and data visualization tools required to operate and monitor the Arc vehicle.
Senior Avionics Test and Integration Engineer InversionSenior Avionics Test and Integration EngineerHawthorne, CA$137,000–$193,000 / yearYou will build and operate flight-like test environments, perform qualification and acceptance testing of avionics hardware, integrate avionics into flight articles, investigate anomalies, and help ensure every electrical subsystem is ready for mission operations. Own vehicle-level integration, checkout, and verification of avionics subsystems including flight computers, power systems, networking equipment, RF systems, sensors, and payload interfaces.
Senior Full Stack Engineer InversionSenior Full Stack EngineerHawthorne, CA$139,000–$201,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. This role is cross-functional and ambiguous by design: you will identify high-leverage opportunities, work closely with technical users, and help shape what high-quality internal tools should look like at Inversion.
Senior Avionics Embedded Software Engineer InversionSenior Avionics Embedded Software EngineerHawthorne, CA$139,000–$201,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Collaborate closely with the core Flight Software and Simulation teams to align vehicle autonomy, telemetry architectures, and GNC algorithm execution.
Full Stack Engineer II InversionFull Stack Engineer IIHawthorne, CA$101,000–$160,000 / yearITAR Compliance: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. This role is cross-functional and ambiguous by design: you will work closely with technical users, take ownership of scoped problems, and help shape what high-quality internal tools should look like at Inversion.
Field Service Engineer Burbank, CA Hamilton CompanyField Service Engineer Burbank, CABurbank, CAFor more than 60 years, Hamilton has been satisfying customer needs by combining quality materials with skilled workmanship, ensuring the highest level of performance of every precision fluid measuring device we manufacture. The ideal candidate will work in the field and support the Greater LA area, while potentially traveling to San Diego or up to San Francisco for support as needed.
Civil Project Engineer Transdev North America IncCivil Project EngineerSan Dimas, CA$89,000–$115,000 / yearThe Civil Engineer is a member of the construction-estimating team who is responsible for independently preparing the civil sections of a bid project, its development and construction document estimates including soliciting and evaluating subcontractor bids and scopes of work, preparing quantity surveys, and reviewing project plans and specifications for all civil categories of work (e.g. Strong computer skills include the ability to use/learn the Heavy Bid estimating software, word process, spread sheets, and company communication tools, such as email, internet, and Microsoft products (e.g., Word, Excel, Office, Outlook).
Chief Estimator - Project Engineer Transdev North America IncChief Estimator - Project EngineerSan Dimas, CA$136,000–$169,000 / yearA minimum of 10 years' of supervisory skills in a similar position supervising and managing employees engaged in railroad track maintenance and construction in an operating railroad environment. Experience with railroad construction means and methods, including track installation, turnouts, flash-butt welding, thermite welding, surfacing, and rail destressing.
Mechanical Engineer, Tooling And Mgse (Ii-Iii) True AnomalyMechanical Engineer, Tooling And Mgse (Ii-Iii)Long Beach, CA$80,000–$165,000 / yearExperience designing large structural weldments for tooling or GSE applications - welded steel frames, integration stands, support structures, or handling fixture bases - including joint selection, weld symbol callouts per AWS A2.4, and distortion mitigation strategies. You will independently execute tooling and MGSE designs ranging from assembly fixtures and handling systems to STE and precision integration equipment, while beginning to take on mentoring and technical leadership responsibilities.
Mechanical Engineer, Space Based Interceptorstooling & Mgse Design (Senior - Staff) True AnomalyMechanical Engineer, Space Based Interceptorstooling & Mgse Design (Senior - Staff)Long Beach, CA$125,000–$255,000 / yearDemonstrated expertise designing large structural weldments for aerospace GSE and tooling - welded steel frames, launcher support structures, integration stands, and handling bases - with proficiency in weld joint design, weld symbol specification per AWS A2.4, pre- and post-weld distortion control, material selection for weldability, and vendor qualification of WPS and welder certifications. We are seeking a Senior or Staff Mechanical Engineer, Space Based Interceptors Tooling & MGSE Design to serve as technical authority and team leader for tooling and ground support equipment across our Space Based Interceptors programs.
Presales Engineer - West Motorola Solutions IncPresales Engineer - WestCA$85,000–$110,000 / yearResponsibilities: Working closely with the Sales Team to deliver customer-driven, world-class, leading-edge, end-to-end solutions that rise to the challenges of first responder, government, utility, transportation, and enterprise customers across the country. Provide engineering services for Customers, including commissioning and testing Motorola equipment in accordance with technical requirements, documentation and contract obligations, system presentation for the internal/external customers.
Sr. Civil Engineer Harris & AssociatesSr. Civil EngineerIrvine, CA$100,000–$132,000 / yearDevelop transportation and municipal infrastructure designs, including roadway improvements, drainage systems, utility improvements, complete streets, and related public works projects. Our work includes transportation improvements, complete streets, water, wastewater, stormwater systems, and emergency repair projects that enhance safety, mobility, and quality of life.
Senior Forging Engineer Macpower Digital Assets Edge Private LimitedSenior Forging EngineerCarson, CA$100,000–$130,000 / yearWe're currently seeking highly motivated and improvement-oriented Senior Forging Engineer at our company's Fastening Systems (HFS) group; a business unit within the company, a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Forging Engineer will partner with manufacturing and research engineers to solve critical forming challenges related to the development of new products and development of improved forging processes for existing products.
Senior Engineer - PLS CADD GTT, LLCSenior Engineer - PLS CADDPomona, CAThe organization employs engineers, project managers, data scientists, and operations professionals who are actively leading California's transformation to a net-zero economy through investments in grid modernization, energy storage, transportation electrification, and distributed energy resources. This major electric utility has been delivering power across Central, Coastal, and Southern California for nearly 140 years, serving approximately 15 million people across a 50,000 square-mile service territory making it one of the largest electric utilities in the United States.
Systems Engineer I Niagara BottlingSystems Engineer IDiamond Bar, CA$71,314.38–$103,405.86 / yearSupports the development of Distribution, Logistics, & Warehouse process improvements in the plant, specific to Warehouse Management Systems (WMS), Laser Guided Vehicles (LGV), Automated Storage & Retrieval Systems (AS/RS) and various other automated or integrated material handling solutions. Designs, develops, and implements mathematical modeling and optimization algorithms to deliver competitive intelligence and improvements in business processes, specifically, in the Supply Chain and Logistics areas.
Systems Engineer I Niagara Bottling LLCSystems Engineer IDiamond Bar, CA$71,314.38–$103,405.86 / yearSupports the development of Distribution, Logistics, & Warehouse process improvements in the plant, specific to Warehouse Management Systems (WMS), Laser Guided Vehicles (LGV), Automated Storage & Retrieval Systems (AS/RS) and various other automated or integrated material handling solutions. Designs, develops, and implements mathematical modeling and optimization algorithms to deliver competitive intelligence and improvements in business processes, specifically, in the Supply Chain and Logistics areas.
Systems Engineer I Niagara WaterSystems Engineer IDiamond Bar, CaliforniaSupports the development of Distribution, Logistics, & Warehouse process improvements in the plant, specific to Warehouse Management Systems (WMS), Laser Guided Vehicles (LGV), Automated Storage & Retrieval Systems (AS/RS) and various other automated or integrated material handling solutions. Designs, develops, and implements mathematical modeling and optimization algorithms to deliver competitive intelligence and improvements in business processes, specifically, in the Supply Chain and Logistics areas.
Mission Simulation Engineer III Blue Origin Enterprises LPMission Simulation Engineer IIICA$121,023–$169,432.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As a Mission Simulation Engineer III, you will take a lead role in implementing and continuously improving an integrated simulation framework spanning orbital mechanics, spacecraft power modeling, payload beam assignments, traffic routing, and payload utilization.
Mechanical Engineer, Tooling and MGSE II-III True Anomaly IncMechanical Engineer, Tooling and MGSE II-IIILong Beach, CA$80,000–$165,000 / yearExperience designing large structural weldments for tooling or GSE applications - welded steel frames, integration stands, support structures, or handling fixture bases - including joint selection, weld symbol callouts per AWS A2.4, and distortion mitigation strategies. You will independently execute tooling and MGSE designs ranging from assembly fixtures and handling systems to STE and precision integration equipment, while beginning to take on mentoring and technical leadership responsibilities.
Mechanical Engineer, Missile Defense Tooling & MGSE Design Senior - Staff True Anomaly IncMechanical Engineer, Missile Defense Tooling & MGSE Design Senior - StaffLong Beach, CA$130,000–$220,000 / yearDemonstrated expertise designing large structural weldments for aerospace GSE and tooling - welded steel frames, launcher support structures, integration stands, and handling bases - with proficiency in weld joint design, weld symbol specification per AWS A2.4, pre- and post-weld distortion control, material selection for weldability, and vendor qualification of WPS and welder certifications. Lead design of complex tooling including precision interceptor assembly fixtures, kill vehicle integration tooling, canister and launcher assembly GSE, STE/ATP fixtures, below-the-hook lifting devices, and missile transportation and environmental containers.
Sr Manufacturing Engineer (Panels) Howmet Aerospace IncSr Manufacturing Engineer (Panels)Torrance, CA$95,000–$117,000 / yearOversee manufacturing planning, drawings, and router preparation to ensure the proper flow of the product from the drawing to the completion of the parts, including tooling, manufacturing operations, processing, testing, and suppliers. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report.
Manufacturing Engineer (Inserts) Howmet Aerospace IncManufacturing Engineer (Inserts)Torrance, CA$80,000–$105,000 / yearOversee manufacturing planning, drawings, and router preparation to ensure the proper flow of the product from the drawing to the completion of the parts, including tooling, manufacturing operations, processing, testing, and suppliers. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report.
NewChief Estimator - Project Engineer TransdevChief Estimator - Project EngineerSan Dimas, CA$136,000–$169,000 / year12+years of progressively responsible experience in railroad track maintenance and/or construction in an operating railroad environment, including at least 7+ years' experience in supervising or directing the work of others engaged in railroad track construction and/or maintenance. A minimum of 10 years' of supervisory skills in a similar position supervising and managing employees engaged in railroad track maintenance and construction in an operating railroad environment.
Field Engineer - Aviation STV Group IncField Engineer - AviationLos Angeles, CA$91,976.90–$105,116.46 / yearThe Field Engineer will work closely with project managers, contractors, airport stakeholders, and design teams to support airside and landside construction activities while ensuring quality, safety, schedule, and regulatory compliance. Support field execution of aviation and airport infrastructure projects including terminals, airfields, utilities, roadways, and support facilities.
Senior Professional Engineer / Project Manager - Airfield & Airport Toltz, King, Duvall, Anderson, and Associates IncSenior Professional Engineer / Project Manager - Airfield & AirportRiverside, CA$15–$20 / hourYou will collaborate with the Vice President of Aviation to further advance our services and enhance our reputation by contributing to the development of marketing plans, cultivating / maintaining relations with clients and agency representatives, tracking prospective opportunities, developing proposals, and delivering client presentations. Collaborate with passionate engineers, designers, technicians, and planners to provide engineering services to airports across the country including small general aviation airports, large international commercial airports, and military bases.
Supplier Quality Engineer (SQE) ElDorado National CaliforniaSupplier Quality Engineer (SQE)Riverside, CaliforniaFounded in 1975, ENC (ElDorado National – California) is a leading U.S. transportation manufacturer specializing in design, engineering, and end-to-end production of heavy-duty buses, shuttles, and cargo vehicles through a custom-build, mixed-model assembly process. ENC is committed to revitalizing American manufacturing through innovation, customer focus, and the delivery of high-quality vehicles that keep communities connected, supported, and moving forward.
Supplier Quality Engineer - Temporary ElDorado National CaliforniaSupplier Quality Engineer - TemporaryRiverside, CaliforniaFounded in 1975, ENC (ElDorado National – California) is a leading U.S. transportation manufacturer specializing in design, engineering, and end-to-end production of heavy-duty buses, shuttles, and cargo vehicles through a custom-build, mixed-model assembly process. ENC is committed to revitalizing American manufacturing through innovation, customer focus, and the delivery of high-quality vehicles that keep communities connected, supported, and moving forward.