Certified Sterile Processing Technician - PRN Methodist Health SystemCertified Sterile Processing Technician - PRNMansfield, TXWith advanced technology, patient-centered design, and a new ninth operating room added in 2025, Methodist Mansfield delivers high-quality, innovative care across services including Level III Trauma, NICU, and Maternal Care. Methodist Mansfield Medical Center is a 294-bed, full-service acute-care hospital serving North Texas and certified as an Advanced Primary Stroke and Heart Attack Center by The Joint Commission.
Certified Surgical Technician PRN - On Call Required Methodist Health SystemCertified Surgical Technician PRN - On Call RequiredCelina, TXMethodist Celina Medical Center is located on a 40+ acre campus just off of Dallas Parkway, and will serve as the community’s first full-service hospital, serving Celina and surrounding communities. The four-story medical center will open with 51 beds, with plans for expansion, and will feature a range of services including cardiology, women’s services, orthopedics, robotic surgery, and more.
Power Generation Technician System OnePower Generation TechnicianMidland, TXSystem One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. Perform diagnostics, maintenance, and repairs on mechanical and electrical systems using CAT ET and related software.
NewClinical Laboratory Scientist / Medical Laboratory Technician - Laboratory MFH-Tyler CHRISTUS HealthClinical Laboratory Scientist / Medical Laboratory Technician - Laboratory MFH-TylerTyler, TXThis Job performs all routine and complicated laboratory procedures including specimen processing and handling, testing of patient specimens, calculating, and reporting of results, performance of quality control procedures, operation and maintenance of instruments and equipment, assisting in the development of new procedures and protocols, may perform phlebotomy and other patient-oriented tasks, and may perform other related duties as requested or directed. Bachelor’s Degree or higher in a chemical, physical, biological or clinical laboratory science or medical technology from an accredited institution or equivalent laboratory training and experience meeting the requirements defined in the CLIA regulation 42CFR493.1489 (includes U.S. Military laboratory training courses of at least 50 weeks).
Travel Technician / Technologist - $2,790 per week in Dallas, TX Cynet HealthTravel Technician / Technologist - $2,790 per week in Dallas, TXDallas, TX$2,790Job Title: Cardiovascular Invasive Technician Profession: Cardiovascular Invasive Specialist Specialty: Cardiovascular Invasive Specialty Duration: 13 weeks Shift: AM Hours per Shift: 10 hours Experience: Minimum of 2 years License: TX MRT Certifications: BLS (AHA Only), ACLS (AHA Only), RCIS or ARRT (RT) Must-Have: - One year of clinical experience preferred - Knowledge and ability to apply complex invasive cardiac and vascular principles, instrumentation, and techniques - Knowledge of cardiovascular anatomy and physiology - Ability to use basic office equipment and demonstrate computer literacy - Ability to multi-task and self-lead problem-solving skills Description: The Cardiovascular Invasive Technician is responsible for surgically scrubbing in and assisting with equipment. The technician must competently perform essential duties of the position, demonstrating a commitment to effective customer service delivery, integrity, and productivity as a team member.
NewMedical Laboratory Technician Lead - Lab AdminGeneral CHRISTUS HealthMedical Laboratory Technician Lead - Lab AdminGeneralLongview, TXLaboratory training including either completion of a clinical laboratory training program approved or accredited by the ABHES, NAACLS, or other organization approved by HHS (note that this training may be included in the 60 semester hours listed above), or at least three months documented laboratory training in each specialty in which the individual performs high complexity testing. 60 semester hours or equivalent from an accredited institution that, at a minimum, includes either 24 semester hours of medical laboratory technology courses, OR 24 semester hours of science courses that include six semester hours of chemistry, six semester hours of biology, and 12 semester hours of chemistry, biology or medical laboratory technology in any combination; AND .
Travel Technician / Technologist - $2,790 per week in Rowlett, TX Cynet HealthTravel Technician / Technologist - $2,790 per week in Rowlett, TXRowlett, TX$2,790Job Title: Cardiovascular Invasive Technician Profession: Cardiovascular Invasive Specialist Specialty: Cardiovascular Invasive Specialist Duration: 13 weeks Shift: AM Hours per Shift: 10 Experience: 4 years minimum experience License: TX MRT Certifications: BLS (AHA Only), ACLS (AHA Only), RCIS or ARRT (R) Must-Have: One year of clinical experience preferred. Monitors patients' ECG and vital signs while in the catheterization lab, notifying physicians of variances and providing emergency procedures as needed.
NewOil & Gas VRU/Compression Field Service Technician Solstice Consulting GroupOil & Gas VRU/Compression Field Service TechnicianMidland, TXTraining/Experience Working with Electrical motors, starters and drives, Vacuum pumps, blowers and belt driven/direct drive motors, working with pneumatic and electric actuators and valves, detonation and flame arrestors, pressure/vacuum relief valves and mechanical check valves. Task examples - Maintenance, repairs, trouble shooting, and start-ups on rental, company, and customer owned oil & gas production equipment such as open flare controls, ECD’s, Burner Management systems, Vapor Recovery Units and other rotary equipment.
Echocardiogram Technician Registered - Cardiology Non Invasive CHRISTUS HealthEchocardiogram Technician Registered - Cardiology Non InvasiveCorpus Christi, TXCHRISTUS Spohn Hospital Corpus Christi - Shoreline overlooking Corpus Christi Bay is the largest and foremost acute care medical facility in the region, with a full range of diagnostic and surgical specialty services in cardiac, cancer, and stroke care. Demonstrates a working knowledge of human anatomy and physiology, Performs diagnostic exams including but not restricted to Echocardiography, TEE, Holtermonitoring 2D/M-Mode, and color doppler.
Control Valve Technician AxelonControl Valve TechnicianPasadena, TX$25 / hourPerform calibration of measurement equipment in accordance with internal quality procedures. The employee must regularly lift and/or move up to 20 lbs, frequently lift and/or move up to 50 pounds.
NewInstrumentation Technician TekWissen LLCInstrumentation TechnicianHouston, TX$25–$28Our client is a leading biotechnology company that combines technological insight with world-class manufacturing, scientific expertise, and process excellence and helps their customers deliver new and innovative medicines that help treat a wide range of diseases. Our client specializes in pharmaceutical ingredients, Bioscience, Biopharmaceuticals, Custom manufacturing, Biotechnology, Life science ingredients, Nutrition, Microbial Control, Agriculture, Materials Science, Personal Care, and cell and gene therapy.
Electrical & Instrumentation Technicians - Sabine Pass, TX Turner Industries Group LLCElectrical & Instrumentation Technicians - Sabine Pass, TXPort Arthur, TXFunctional Requirements: Receives, inventories and catalogs instruments for calibration according to construction schedule; sets up calibration and loop files; checks on installation of instrument loops; coordinates and runs (or assists) in loop checks, to include checkout with computer as required; maintains installation and completion records; keeps loop drawings, installs air tubing and control tubing runs, works start up following start up procedures; inspects meters, indicators and gauges to detect abnormal fluctuations; test accuracy of flow meters' pressure gauges, temperature indicators, controllers, radiation counters or detectors and other recording, indicating or controlling instruments to locate defective components in the system; removes defective instruments from system and decontaminates, disassembles and cleans instruments and replaces defective parts; lubricates instruments and replaces defective wiring and tubing; keeps loop drawings, installs air tubing and control tubing runs, works start up following start up procedures. Tools/Equipment: Employee may be required to provide the following: tool box, tube cutters, blade terminating screwdriver, channel lock pliers, vise grips, center punch, screw driver, set if combination wrenches, adjustable wrench set, nut driver, small dikes, rain suit.
Instrumentation Technician (Taylor, TX) - Austin Industrial Austin IndustrialInstrumentation Technician (Taylor, TX) - Austin IndustrialTaylor, TXAustin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Must be able to test, calibrate, troubleshoot, overhaul and repair controlling, indicating and measuring instrument devices to ensure specified operating performance using hand tools, testing and calibrating instruments and equipment and precision measuring instruments.
Instrumentation Technician II Prime ControlsInstrumentation Technician IIEl Paso, TexasFull timeYou will assist with most aspects of system integration projects by identifying parts and components for PLC, network, computer, and software components; programming PLCs and HMIs; testing functionality of program logic and installed equipment; troubleshooting software and systems issues during start-up; developing and assembling required documentation and user manuals created during the development process. As a federal contractor, Prime Controls is required to participate in the federal government’s E-Verify program, which confirms employment authorization of all newly hired employees and most existing employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Instrumentation Technician MP Materials CorpInstrumentation TechnicianFort Worth, TXPosition Responsibilities: Install, integrate, calibrate, troubleshoot, repair various measurement and controls equipment that monitor parameters such as pH, conductivity, temperature, oxygen, flow rate, level, mass, and water/air pressure. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves-enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems.
NewSenior Instrumentation Technician University of Texas MD Anderson Cancer CenterSenior Instrumentation TechnicianHouston, TX$82,500–$103,000 / yearWhile BAS experience is a must-have, candidates with additional skills such as MAXIMO (CMMS) experience, installation of valves and actuators (particularly SIEMENS products), electronic control systems, and communication with BOT teams on BAS signals and data will be highly valued. They possess a working knowledge of BAS systems, building automation controls, and the ability to diagnose issues related to hot water, chilled water, humidity, temperature, and air pressure systems commonly found in pharmacy and OR settings.
NewInstrumentation Technician - HVAC University of Texas MD Anderson Cancer CenterInstrumentation Technician - HVACHouston, TX$69,000–$86,000 / yearSUMMARY The primary purpose of the Instrumentation Technician position is to provide highly skilled technical work involving electronic, electrical, mechanical, and pneumatic controls of typical state-of-the-art hospital facilities systems and equipment. This day-shift role supports both administrative and school facilities and requires strong system-level thinking with expertise in loops, networks, and controls.
Instrumentation Technician Targa Resources CorpInstrumentation TechnicianTXPREFERRED QUALIFICATIONS: Two-year associates degree in instrumentation or equivalent training Five years' experience in petrochemical industry Experience working as a self-starter, and ability to work with peers in collaborative efforts CMMS (Computerized maintenance management system) experience (SAP, Maximo etc.) Experience with Lock-Out/Tag-Out procedures and work permit process PHYSICAL DEMANDS: Ability to lift, push, and pull at least a minimum of 50bs. POSITION SUMMARY: The Instrumentation Technician is responsible for performing corrective & preventative maintenance on I&E systems as analytical equipment, control elements, advanced hardware (computers, telemetry & etc.), logic networks and other related equipment associated typically in the processing, fractionation, storage and transportation of natural gas liquids.
Instrumentation Technician (Taylor, TX) - Austin Industrial Austin Industries IncInstrumentation Technician (Taylor, TX) - Austin IndustrialTaylor, TXAustin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Must be able to test, calibrate, troubleshoot, overhaul and repair controlling, indicating and measuring instrument devices to ensure specified operating performance using hand tools, testing and calibrating instruments and equipment and precision measuring instruments.
Instrumentation Technician PTS AdvanceInstrumentation TechnicianDallas, TXThe ideal candidate will have a strong technical background and leadership skills, with the ability to manage teams, develop training programs, and improve plant processes. Instrumentation Technician Location: Dallas, TX Job Overview: We are seeking a motivated Instrumentation Technician Lead to oversee and support our plant's Instrumentation Technicians.
Electrical and Instrumentation Technician Tamko Building ProductsElectrical and Instrumentation TechnicianDallas, TXIf you consider yourself driven to investigate changes and problems, to learn and develop those around you, and are excited to work on a cross-functional team of operators and technicians, then this fast-paced, engineering position deserves your application! While performing the duties of this job, the employee may work around moving mechanical parts, at elevated heights, where dusts and fumes could be present in the air, with or in proximity to chemicals, in hot environments, around electrical equipment, and in a loud environment.
Instrumentation Technician- Austin Industrial (Taylor, TX) Austin Industries IncInstrumentation Technician- Austin Industrial (Taylor, TX)Taylor, TXCompetencies/Experience Needed: • Advanced electro mechanical knowledge • Maintains confidentiality of sensitive and proprietary information • Able to work in a team environment • Understands manufacturing systems • Effectively communicates via verbal/written means to immediate team and other SAS departments • Advanced knowledge of relevant SAS systems • Has advanced knowledge of relevant software tools (i.e., Programmable Logic Controller, Microsoft etc.) • Ability to work flexible hours as necessary • Intermediate knowledge in relevant code regulations • Ability to work independently within the broad scope of an objective • Intermediate knowledge of mentoring, coaching and leading groups/people • May require the ability to maintain a state license as necessary (i.e., journeyman) • Physical Demands: While performing the duties of this job, the employee is regularly required to sit. Required Education and Experience: • High School Diploma or technical school certification preferred • Typically requires 8-15 years of experience • May require trade knowledge in a specialized field • Training in industrial instrumentation, electrical systems, computerized controls, hydraulics and related areas.
ELECTRIC/INSTRUMENTATION TECHNICIAN A Inteplast Group CorpELECTRIC/INSTRUMENTATION TECHNICIAN ATXTITLE: Electric/Instrumentation Technician A. POSITION OBJECTIVE: Monitor and assess control systems and carry out repairs under intense pressure to ensure there is no halt in the production process. Install instrumentation including mounting hardware and sensing lines, pulling and termination of I/O cables, configuration, calibration, and basic PLC programming.
Instrumentation & Controls Technician II (Salary) The University of Texas at AustinInstrumentation & Controls Technician II (Salary)Austin, TXHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Our goal is to self-identify operations and maintenance issues long before our clients realize a repair is needed and take a thoughtful approach to using their resources, structuring processes, and providing the best client service and use of university resources.
Industrial Electrical & Instrumentation (E&I) Technician Koch IncIndustrial Electrical & Instrumentation (E&I) TechnicianTXIndustrial Electrical & Instrumentation (E&I) Technician - Sweetwater, Texas, United States - 187594 - Koch. Koch Disruptive Technologies.
Instrumentation Controls Technician White House USAInstrumentation Controls TechnicianFort Worth, TX$38.35–$44.74 / hourMaintains, adjusts, and repairs electric motor driven valves, electro-hydraulic valves and air diaphragm motor valves with needle type, double seated type or three-way type inner valves in lines associated with control systems for production of steam and chilled water (e.g., continuous blow down lines, condensate lines, city water supply, boiler feed water, condenser water lines and chilled water lines). Duties include: Performs, maintains, adjusts, troubleshoots and repairs pneumatic and digital control mechanisms (e.g., level and pressure transmitters, relays, valve positioners, power drives, pneumatic and electric operated valves, pressure controllers and similar mechanisms), refrigerant leak monitors, emissions monitoring equipment, opacity systems, and electromechanical control mechanisms (e.g., water softener and de-alkalizer control system, fly ash system and chemical field process equipment.
Electrical and Instrumentation Technician III CRH PlcElectrical and Instrumentation Technician IIINew Braunfels, TXInspect, PM and maintain generators, Pfister and other feeders, MCCs and Transformers, PLCs, hydraulic systems,, pressure vessels, Inspect, PM and maintain other cement plant equipment such as dust collectors, conveyors, kilns, clinker coolers, coal mills, ball mills, vertical mills, vibrators, flow meters, bin level systems, temperature probes, level gauges, fans, blowers, pressure vessels, pumps, valves and gates, air separators, silos, reclaimer, load-out equipment, etc. What you'll be contributing: Under the supervision of the Electrical Superintendent, the primary function of the Electrical/Instrument Technician is to maintain, calibrate, perform trouble analysis, consult, research, and develop process control instrumentation for the purpose of obtaining optimum production efficiency.
NewSenior Building Automation & Instrumentation Technician UT MD AndersonSenior Building Automation & Instrumentation TechnicianHouston, TXThe ideal candidate has building automation experience in hospital settings, knowledge of BAS, and ability to diagnose hot water, chilled water, humidity, temperature, and#J-18808-Ljbffr. The role focuses on maintaining complex electrical, electronic, and HVAC control systems essential to operations and patient care, with hands-on troubleshooting and cross-functional coordination.
NewSenior Instrumentation Technician - Medical Facilities Automation University of Texas MD Anderson Cancer CenterSenior Instrumentation Technician - Medical Facilities AutomationHouston, TXThe ideal candidate has hands-on BAS experience in hospitals, strong troubleshooting skills, and familiarity with Siemens equipment and MAXIMO CMMS. The University of Texas MD Anderson Cancer Center seeks a Senior Instrumentation Technician to support Fac Mgt-PC&PF-Bld Care & Ops.
NewElectrical and Instrumentation Technician Cross Resource GroupElectrical and Instrumentation TechnicianSan Antonio, TXThis position supports both equipment reliability and pilot plant operations, ensuring all devices are properly calibrated, documented, and functioning safely and efficiently. Pilot Plant Construction & Operation Assist with construction of pilot plant systems using pipe, tubing, AC/DC powered equipment, and related components.
Instrumentation and Controls Technician II-III Blue Origin Enterprises LPInstrumentation and Controls Technician II-IIITXand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Team Focus & Domain Expertise: Instrumentation & Controls Technicians at Blue Origin's Van Horn liquid rocket engine test facilities play a critical role in the development, buildout, and reliable operation of test stands supporting propulsion innovation.
Instrumentation and Controls Technician II-III Blue OriginInstrumentation and Controls Technician II-IIIVan Horn, Texasand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewElectrical Instrumentation Technician Hereford Ethanol PartnersElectrical Instrumentation TechnicianHereford, TXFull timeMoves, sets, calibrates, as needed, instrument/electrical controls such as - flow control valves, limit switches, auto levers, and index arms, on control panels to control process variables such as: flows, temperatures, pressures, vacuum, time, and chemicals, by automatic regulation and remote control of processing units such as: heaters, coolers, thermal oxidizer, compressors, exchangers, and other units. In this position, Technician will report to the Maintenance Manager and will be assigned to perform maintenance which includes areas of expertise in electrical maintenance and installation, instrumentation, controls, PLC/DCS programming and troubleshooting.
Instrumentation & Controls Technician Blue Origin Enterprises LPInstrumentation & Controls TechnicianTXand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Electrical, Instrumentation, and Controls (EI&C) Technician NAES CorporationElectrical, Instrumentation, and Controls (EI&C) TechnicianHubbard, TX$54.25–$63.91 / hourPart timeIt features a diverse mix of generation technologies, including Siemens SGT-800/400 simple cycle turbines, MAN/Everllence 18V51/60G gas reciprocating engines, GE LM6000/LM2500 simple cycle turbines, Pratt & Whitney FT8 simple cycle turbines, and a Battery Energy Storage System (BESS), enabling flexible, reliable power output. Calibrate, test, maintain, troubleshoot, and install plant instrumentation and control systems, including control valves, fan dampers, variable speed drives, motors, transmitters, analyzers, and systems specific to gas turbines, reciprocating engines, and integrated energy storage systems (BESS).
Instrumentation & Control Technician II - Austin Water City of AustinInstrumentation & Control Technician II - Austin WaterAustin, TexasThis position will require that you be able to perform the following essential job functions with confidence and with or without reasonable accommodations: Occasional carrying or lifting up to 50 lbs., occasional pushing or pulling up to 50 lbs., frequent standing and walking, occasional sitting and lying, frequent climbing of stairs and ladders, occasional reaching overhead, crawling, and twisting, frequent kneeling, stooping/bending, and repetitive hand/foot movement, far and near vision with color differentiation, hearing and communicating, frequent finger dexterity, grasping or squeezing, traveling to work sites, ability to wear personal protective equipment, exposure to extreme weather conditions, atmospheric and hazardous conditions and very loud noise. Graduation from an accredited high school or equivalent, plus four (4) years of experience in the repair, installation, maintenance, and calibration of instrumentation and control system equipment, or a related field, including two (2) years of instrumentation & control experience in a water and wastewater treatment facility or a similar industrial process control facility; OR.
Instrumentation and Electrical Technician ICON Technology IncInstrumentation and Electrical TechnicianAustin, TXAny and all information provided will be considered confidential, will be kept separate from your application and/or personnel file, and will only be used in accordance with applicable laws, orders and regulations, including those that require the information to be summarized and reported to the federal government for civil rights enforcement purposes. In this role, you will be responsible for installing, maintaining, and troubleshooting electrical and instrumentation systems, with a strong focus on wiring, cable fabrication, and control systems.
Electrical and Instrumentation Technician III Americas Cement CentralElectrical and Instrumentation Technician IIINew Braunfels, TXInspect, PM and maintain generators, Pfister and other feeders, MCCs and Transformers, PLCs, hydraulic systems,, pressure vessels, Inspect, PM and maintain other cement plant equipment such as dust collectors, conveyors, kilns, clinker coolers, coal mills, ball mills, vertical mills, vibrators, flow meters, bin level systems, temperature probes, level gauges, fans, blowers, pressure vessels, pumps, valves and gates, air separators, silos, reclaimer, load-out equipment, etc. Under the supervision of the Electrical Superintendent, the primary function of the Electrical/Instrument Technician is to maintain, calibrate, perform trouble analysis, consult, research, and develop process control instrumentation for the purpose of obtaining optimum production efficiency.
Facilities Instrumentation and Controls Technician Qorvo IncFacilities Instrumentation and Controls TechnicianRichardson, TXQorvo serves multiple high-growth segments of large global markets, including consumer electronics, smart home/IoT, automotive, EVs, battery-powered appliances, network infrastructure, healthcare and aerospace/defense. Responsibilities may include, but are not limited to: Install, commission, program, and troubleshoot industrial instrumentation and controls systems, including sensors, transmitters, control valves, VFDs, drives, and actuators.
Technician, Instrumentation A Freeport LNG Development LPTechnician, Instrumentation AFreeport, TXUse knowledge of programming, diagnostics and troubleshooting of all automation equipment including, but not limited to, flow transmitters, flow meters, level transmitters, control valves and temperature controls throughout the Freeport LNG facilities. Make periodic preventative maintenance inspections of metering control instruments, diagnosing existing or potential trouble; clean, lubricate, calibrate and adjusts as conditions indicate.
NewElectrical & Instrumentation Technician II Plains All American Pipeline LPElectrical & Instrumentation Technician IITXProficient in safe work practices and procedures (e.g., how to identify site-specific PPE, perform confined space entry, report incidents, describe site specific hazards (e.g., asbestos, benzene, silica, nitrogen, heat and cold stress, noise, radiation), and safely handle materials at the work site). Should be trained in all types of protective devices associated with pipeline operations, including mechanical and solid-state protective relays, breakers, motor windings, RTDs, temperature transmitters and vibration sensors/recorders, and associated devices.
Instrumentation/Electric Technician - Lead ONEOK, IncInstrumentation/Electric Technician - LeadMentone, TX$101,000–$151,000 / yearThrough our approximately 60,000-mile pipeline network, we transport the natural gas, natural gas liquids (NGLs), refined products and crude oil that help meet domestic and international energy demand, contribute to energy security and provide safe, reliable and responsible energy solutions needed today and into the future. Leads or performs a specialized level of work including installation, troubleshooting, calibrating, maintaining and repair of various electrical/electronic, pneumatic, hydraulic, analyzers, measurement, control and automation systems, and related equipment.
Instrumentation/Electric Technician (Silver Creek, Weatherford, or W Ft. Worth, TX) ONEOKInstrumentation/Electric Technician (Silver Creek, Weatherford, or W Ft. Worth, TX)Weatherford, TexasPerforms a specialized level of work including installation, troubleshooting, calibrating, maintaining, and repair of various electrical/electronic, pneumatic, hydraulic, analyzers, measurement, control and automation systems, and related equipment. Experience preparing, processing, or verifying maintenance and repair records, safety and environmental reports, electrical schematics and diagrams, pressure readings, and material and supply orders.
Instrumentation/Electric Technician (Silver Creek, Weatherford, or NE Ft. Worth, TX) Oneok IncInstrumentation/Electric Technician (Silver Creek, Weatherford, or NE Ft. Worth, TX)Weatherford, TX$79,000–$119,000 / yearPerforms a specialized level of work including installation, troubleshooting, calibrating, maintaining, and repair of various electrical/electronic, pneumatic, hydraulic, analyzers, measurement, control and automation systems, and related equipment. Experience preparing, processing, or verifying maintenance and repair records, safety and environmental reports, electrical schematics and diagrams, pressure readings, and material and supply orders.
Instrumentation and Electrical Technician (2nd Shift) Noveon Magnetics IncInstrumentation and Electrical Technician (2nd Shift)San Marcos, TXAs the only U.S manufacturer of permanent rare earth magnets essential to a range of technologies that rely on an electric motor--from electric vehicles to medical devices to aerospace and defense systems to clean energy--we're ushering in an electric future that is 100% Made in America. We're a fast-growing, diverse team of scientists, engineers, entrepreneurs, and innovators from across the globe united by a shared mission to support the commercialization of our magnet manufacturing technology and forge a new path toward resource efficiency, resource independence and a low-carbon economy.
Technician I-Instrumentation and Controls Texas Tech UniversityTechnician I-Instrumentation and ControlsLubbock, TX$21.39–$27.84 / hourSafety & Compliance (Highest Priority)Comply with all Texas Tech University, Utilities, and EH&S policies and follow safety programs (LOTO, JHA, Confined Space, Hot Work) to protect employees, contractors, and the public. Built on the values of West Texas — hard work, grit and authenticity — the university graduates students who are deeply engaged in service to their communities and well-positioned to succeed in the world.
Instrumentation & Control Technician II Lower Colorado River Authority (LCRA)Instrumentation & Control Technician IIBuchanan Dam, TexasIf you would like to be part of LCRA's critical mission to manage water supply and manage floods on the Highland Lakes and the Colorado River, then we want you! Travel independently or in small teams to field locations (substations, power plants, and water systems) as scheduled.
Work Study - Electronics/Instrumentation/Computer Science Lab Technician Odessa CollegeWork Study - Electronics/Instrumentation/Computer Science Lab TechnicianOdessa, TXThe Electronics Instrumentation and Computer Science Laboratory Technician maintains repairs, calibrates, and installs electronic pneumatic and hydraulic equipment and manages the distribution and upkeep of laboratory tools, test equipment, and materials for students. Set up and maintain laboratory stations, including test equipment (e.g., DMMs, oscilloscopes, function generators, tools, e.g., soldering irons, cutters, probes, and materials, e.g., electronic components, wiring, network cables).
Instrumentation & Controls Technician - 2nd Shift Space Exploration Technologies CorpInstrumentation & Controls Technician - 2nd ShiftMcGregor, TXOperational knowledge of an oscilloscope and multi-meter, soldering wires and connectors, operation of various crimping tools, wire stripping, continuity testing, pinning out a military type connector, routing and tie wrapping cables, drilling and tapping holes, and building junction boxes. PREFERRED SKILLS AND EXPERIENCE: Experience working with any of the following instrumentation: resistance temperature devices (RTDs), silicon diode temperature devices, strain gauges, load cells, displacement transducers, pressure transducers, thermocouples, and flow meters (turbine, coriolis, and ultrasonic).
Facility Instrumentation & Controls Technician, Texas Institute for Electronics The University of Texas at AustinFacility Instrumentation & Controls Technician, Texas Institute for ElectronicsAustin, TexasHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. With over $1 billion in funding from the US DoD and the state of Texas, we’re at the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more.