Project Engineer – Instrumentation and Monitoring Sixense Inc.Project Engineer – Instrumentation and Monitoringminneapolis, MN$70,000–$110,000 / yearFull timeInstall and maintain various geotechnical and structural monitoring instruments following Sixense procedures, including but not limited to datalogging systems, Vibration Monitors, Inclinometers, Piezometers, Noise Monitors and Automatic Motorized Total Stations. Demonstrable experience with the installation and maintenance of geotechnical and structural instruments such as piezometers, inclinometers, extensometers, and total stations, or similar technologies.
UAS/UAV Mechanical Engineer kyybaUAS/UAV Mechanical EngineerSt Paul, MN$40–$44 / hourContractorThis position requires experience in systems engineering practices, mechanical design, UAS instrumentation, hardware testing/validation, as well as exceptional organization, attention to detail, and dedication to user success. Description:The Hardware Systems Engineer is responsible for the integration of sensors and hardware onto UAS (unmanned aerial systems) platforms.
Lead Controls and Instrumentation Engineer Calspan LLCLead Controls and Instrumentation EngineerSt. Paul, MinnesotaFull timeDesign and develop electronic subsystems, including data acquisition systems, control and integration of electro-mechanical valves and instrumentation (temperatures, pressures, flow, etc.), control loops, electrical control systems, junction boxes, and panel layouts. The Lead C&I Engineer will be responsible for design, implementation, test, and support of controls, software, and data acquisition systems used in test cells, wind tunnels, and other aerospace ground test facilities.
Lead Controls and Instrumentation Engineer Calspan CorpLead Controls and Instrumentation EngineerMNDesign and develop electronic subsystems, including data acquisition systems, control and integration of electro-mechanical valves and instrumentation (temperatures, pressures, flow, etc.), control loops, electrical control systems, junction boxes, and panel layouts. The Lead C&I Engineer will be responsible for design, implementation, test, and support of controls, software, and data acquisition systems used in test cells, wind tunnels, and other aerospace ground test facilities.
Principal Engineer, Controls & Instrumentation Current openings at Niron MagneticsPrincipal Engineer, Controls & InstrumentationMinneapolis, MinnesotaDevelop training programs to enable staff to operate the DCS Collaborate with cross-functional teams, stakeholders, and vendors to evaluate and implement new process automation and controls schemes. From greenfield equipment design and capital projects through commissioning and continuous improvement, you'll partner across engineering, operations, and manufacturing to transform innovative processes into robust, repeatable production.
NewField Service Engineer - Analytical Instrumentation Shimadzu Scientific InstrumentsField Service Engineer - Analytical InstrumentationMinneapolis, MNA leading scientific instruments provider is seeking a Field Service Engineer to support and maintain analytical instruments. In this full-time role based in Minneapolis, you will perform repairs, maintenance, and provide technical support for HPLC, GC, and similar instruments.
Senior Instrumentation & Controls Engineer Stanley Consultants IncSenior Instrumentation & Controls EngineerMinneapolis, MN$122,300–$160,850 / yearOpportunities include developing and leading process instrumentation and control systems tasks on: municipal water/wastewater management systems, power plants, industrial automation systems, microgrid control systems, combined heat and power (CHP) systems for utilities, universities and campuses as well as industrial facilities. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
NewDigital Analytics Engineer - Instrumentation and Tagging q1 technologiesDigital Analytics Engineer - Instrumentation and TaggingMinneapolis, MN5+ years of practical implementation experience with one or more web/digital analytics tools (e.g., Adobe Analytics, Google Analytics) and tag management systems (e.g., Tealium, Ensighten, Adobe Launch, Google Tag Manager). • Additional certifications required for various digital analytics roles, including but not limited to: • Tealium EventStream API Hub Certification.
Instrumentation Service Engineer II Exact Sciences CorpInstrumentation Service Engineer IIMinneapolis, MN$76,000–$125,000 / yearBachelor's degree in Engineering, Technology, Electronics or other degree relevant to essential duties; or Associate degree in Engineering, Technology, Electronics, or related field and 2 years of relevant experience as outlined in the essential duties; or High School diploma/General Education diploma (GED) and 4 years of relevant experience as outlined in the essential duties in lieu of bachelor's degree. Documentation & Compliance: Complete accurate service records, ensure documentation meets Good Documentation Practices (GDP), and comply with safety and regulatory requirements (e.g., OSHA, FDA, ISO, CLIA) and support the company's Quality Management System (QMS).
Lead Instrumentation & Controls Engineer 1 Nuclear Sargent & Lundy LLCLead Instrumentation & Controls Engineer 1 NuclearMinneapolis, MN$118,023–$180,313 / yearWork collaboratively on quality assessments and critical digital reviews, Perform consulting level work for digital IOT, innovation, and strategic first of a kind (FOAK) projects for the nuclear industry, Prepare and review detailed calculations, including scaling, uncertainty, and setpoint calculations for analog and digital controls applications, Prepare documentation for design input for drawing production including master diagrams and schematics, Interface with vendors to prepare and review materials and equipment purchase specifications, Prepare reports and studies that present technical information in a clear and concise manner to meet client requirements, Perform independent reviews of work performed by others including calculations and drawing preparation, Attend client meetings and site walkdowns to validate scope and ensure client satisfaction, Support station outage activities as required. Valued but not required skills and experience: PE license preferred• Construction and start-up experience a plus• Commissioning experience a plus• Broad background in providing technical support to nuclear plant projects - from design, project planning, providing technical expertise associated with testing and operations, contract specifications, project oversight, successful project execution, and overall direction of complex nuclear projects.
Lead Instrumentation & Controls Engineer 1 - Nuclear Sargent & LundyLead Instrumentation & Controls Engineer 1 - NuclearMinneapolis, Minnesota$118,023–$180,313 / yearFull timeWork collaboratively on quality assessments and critical digital reviews, Perform consulting level work for digital IOT, innovation, and strategic first of a kind (FOAK) projects for the nuclear industry, Prepare and review detailed calculations, including scaling, uncertainty, and setpoint calculations for analog and digital controls applications, Prepare documentation for design input for drawing production including master diagrams and schematics, Interface with vendors to prepare and review materials and equipment purchase specifications, Prepare reports and studies that present technical information in a clear and concise manner to meet client requirements, Perform independent reviews of work performed by others including calculations and drawing preparation, Attend client meetings and site walkdowns to validate scope and ensure client satisfaction, Support station outage activities as required. You will work on challenging assignments that include investigating, troubleshooting, and solving a wide variety of instrumentation & controls engineering issues, Coordinate systems design activities to ensure installation and operations will comply with specifications, codes, and client requirements, Perform Digital Systems Design Development -- PLC, DCS, HSI, networked computer systems, and digital instrumentation & control systems functional requirements for nuclear plant systems.
Geotechnical Instrumentation Senior Staff Engineer Terracon Consultants IncGeotechnical Instrumentation Senior Staff EngineerPlymouth, MNYou will work as part of collaborative, multidisciplinary teams on projects that often span multiple Terracon offices across the country-supporting large, complex infrastructure and energy projects where instrumentation and monitoring are critical to managing risk, verifying performance, and informing design decisions. This role is ideal for an experienced geotechnical engineer who is ready to deepen technical expertise in instrumentation while taking on increased responsibility in project execution and team coordination.
Senior Instrumentation & Controls Engineer 2 Nuclear Sargent & Lundy LLCSenior Instrumentation & Controls Engineer 2 NuclearMinneapolis, MN$100,019–$152,807 / yearIn this role, we expect people to be willing or able to lead others who use modern tools: You are expected to lead others in taking engineering problems from issue to solution by setting expectations for using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. Leaders in these roles often direct automation and process-improvement work, for example, how teams automate calculations, summarize technical documents, or generate design documentation and guiding when and how AI or agentic AI tools are used while ensuring results are checked.
Senior Instrumentation & Controls Engineer 1 Nuclear Sargent & Lundy LLCSenior Instrumentation & Controls Engineer 1 NuclearMinneapolis, MN$84,762–$129,498 / yearIn this role, we expect people to be willing or able to lead others who use modern tools: You are expected to lead others in taking engineering problems from issue to solution by setting expectations for using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. Leaders in these roles often direct automation and process-improvement work, for example, how teams automate calculations, summarize technical documents, or generate design documentation and guiding when and how AI or agentic AI tools are used while ensuring results are checked.
Senior Instrumentation & Controls Engineer 2 - Nuclear Sargent & LundySenior Instrumentation & Controls Engineer 2 - NuclearMinneapolis, Minnesota$100,019–$152,807 / yearFull timeAI & Automation at Sargent & Lundy: In this role, we expect people to be willing or able to lead others who use modern tools: You are expected to lead others in taking engineering problems from issue to solution by setting expectations for using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. Leaders in these roles often direct automation and process-improvement work, for example, how teams automate calculations, summarize technical documents, or generate design documentation and guiding when and how AI or agentic AI tools are used while ensuring results are checked.
Senior Instrumentation & Controls Engineer 1 - Nuclear Sargent & LundySenior Instrumentation & Controls Engineer 1 - NuclearMinneapolis, Minnesota$84,762–$129,498 / yearFull timeAI & Automation at Sargent & Lundy: In this role, we expect people to be willing or able to lead others who use modern tools: You are expected to lead others in taking engineering problems from issue to solution by setting expectations for using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. Leaders in these roles often direct automation and process-improvement work, for example, how teams automate calculations, summarize technical documents, or generate design documentation and guiding when and how AI or agentic AI tools are used while ensuring results are checked.
Instrumentation & Controls Engineer 3 Nuclear Sargent & Lundy LLCInstrumentation & Controls Engineer 3 NuclearMinneapolis, MN$74,353–$113,595 / yearIn this role, we expect people to be willing or able to solve problems using modern tools: You are expected to take engineering problems from issue to solution using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. Since 1954, we've been a trusted leader in nuclear engineering, design, and licensing, with expertise spanning small modular reactors (SMRs), advanced reactor technology (ART), and first-of-a-kind commercial reactor restart projects.
Instrumentation & Controls Engineer 3 - Nuclear Sargent & LundyInstrumentation & Controls Engineer 3 - NuclearMinneapolis, Minnesota$74,353–$113,595 / yearFull timeAI & Automation at Sargent & Lundy: In this role, we expect people to be willing or able to solve problems using modern tools: You are expected to take engineering problems from issue to solution using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. Since 1954, we’ve been a trusted leader in nuclear engineering, design, and licensing, with expertise spanning small modular reactors (SMRs), advanced reactor technology (ART), and first-of-a-kind commercial reactor restart projects.
Geotechnical Instrumentation Project Manager Terracon Consultants IncGeotechnical Instrumentation Project ManagerPlymouth, MNYou will work as part of collaborative, multidisciplinary teams on projects that often span multiple Terracon offices across the country-supporting large, complex infrastructure and energy projects where instrumentation and monitoring are critical to managing risk, verifying performance, and informing design decisions. This role is ideal for an experienced geotechnical engineer who is ready to deepen technical expertise in instrumentation while taking on increased responsibility in project execution and team coordination.
Instrumentation & Controls Engineering Consultant 2 Nuclear Sargent & Lundy LLCInstrumentation & Controls Engineering Consultant 2 NuclearMinneapolis, MN$142,710–$215,440 / yearSince 1954, we've been a trusted leader in nuclear engineering, design, and licensing, with expertise spanning small modular reactors (SMRs), advanced reactor technology (ART), and first-of-a-kind commercial reactor restart projects. Our nuclear power generation clients are digitizing their existing power plants and building new nuclear power plants, small modular reactors (SMR) due to the increasing demand for electric power.
Instrumentation & Controls Engineering Consultant 2 - Nuclear Sargent & LundyInstrumentation & Controls Engineering Consultant 2 - NuclearMinneapolis, Minnesota$145,310–$222,001 / yearFull timeSince 1954, we’ve been a trusted leader in nuclear engineering, design, and licensing, with expertise spanning small modular reactors (SMRs), advanced reactor technology (ART), and first-of-a-kind commercial reactor restart projects. Our nuclear power generation clients are digitizing their existing power plants and building new nuclear power plants, small modular reactors (SMR) due to the increasing demand for electric power.
NewGeotechnical Instrumentation Project Lead TerraconGeotechnical Instrumentation Project LeadMinneapolis, MNThis role requires an experienced geotechnical engineer to support project design, implementation, and analysis of monitoring programs across diverse sectors. Terracon in Plymouth, Minnesota is seeking a Geotechnical Instrumentation Project Manager to advance your career in geotechnical instrumentation and monitoring.
Controls and Instrumentation Designer Calspan LLCControls and Instrumentation DesignerSt. Paul, MinnesotaFull timeThe Controls & Instrumentation (C&I) Designer is responsible for the efficient production of detailed electrical, schematic, pneumatic, fabrication, and assembly drawing packages based on engineering inputs for test cells, wind tunnels, and other aerospace ground test facilities. Organize CAD drawings (junction box and other larger assemblies, panel layouts, schematics, cable assemblies, etc.) and bills of material in accordance with company configuration management plan and established procedures.
Controls and Instrumentation Designer Calspan CorpControls and Instrumentation DesignerSt. Paul, MNThe Controls & Instrumentation (C&I) Designer is responsible for the efficient production of detailed electrical, schematic, pneumatic, fabrication, and assembly drawing packages based on engineering inputs for test cells, wind tunnels, and other aerospace ground test facilities. Organize CAD drawings (junction box and other larger assemblies, panel layouts, schematics, cable assemblies, etc.) and bills of material in accordance with company configuration management plan and established procedures.
R&D Engineer KonikR&D EngineerMinneapolis, MN$150,000–$180,000 / yearThe ideal candidate is naturally curious, enjoys solving complex technical challenges, and is comfortable moving between design work, field environments, vendor coordination, and rapid prototyping efforts. This organization is helping redefine energy infrastructure through proprietary mechanical technology and advanced thermal systems designed to reduce emissions across commercial and industrial facilities.
Electrical Reliability Engineer Koch IncElectrical Reliability EngineerRosemount, MN$105,000–$160,000 / yearElectrical Reliability Engineer - United States - 186587 - Koch. Koch Engineered Solutions.
Specialty Test Engineer (level 3 or 4) Northrop Grumman CorpSpecialty Test Engineer (level 3 or 4)Plymouth, MNLeading the industry, this team successfully completes lifecycle support for medium-caliber cannons, develops miniature, precision strike weapons for airborne platforms, creates survivability solutions for soldiers and the next generation tactical ammunition for a variety of combat platforms. • Bachelor of Science degree in Electrical Engineering, Computer Engineering, or STEM discipline plus 5 years of professional experience in building and maintaining automated test equipment (ATE).
Chemical/Mechanical Engineer I (Local to Twin Cities Metro) C-P Systems CorporationChemical/Mechanical Engineer I (Local to Twin Cities Metro)Maplewood, MNRemote$70,000–$80,000 / yearEstablished in 1995 from 3M's Chemical Division, C-P Systems is a process mechanical engineering consulting firm specializing in piping design, P&ID development, process engineering, laser scanning, and construction documentation for industrial clients across the United States. The successful candidate will assist in process modeling, equipment sizing, instrumentation development, and preparation of construction bid packages while gaining hands-on experience in project execution and field support.
Project Engineer Claros TechnologiesProject EngineerMinneapolis, MN$100,000–$130,000The Engineer III works closely with Sales, Engineering and external partners to deliver safe, efficient, and high-quality solutions that enable sustainable and responsible PFAS management. • Manage and coordinate multiple client pilot and commercial projects from design through delivery, ensuring alignment with project plans, schedules, budgets, and quality requirements.
Verification Test Engineer Katalyst Healthcares & Life SciencesVerification Test EngineerChaska, MNThis role is responsible for instrument maintenance, execution of verification protocols, and configuration management of test instruments. The position requires hands on work in the lab and close collaboration with engineering, quality, and test method development teams.
NewField Service Engineer Technical SourceField Service EngineerMinneapolis, MNThis is an ideal opportunity for someone who enjoys solving complex technical problems, working independently, and building relationships with customers. Successful engineers are comfortable working independently, traveling throughout their territory, and taking ownership of complex technical challenges.
Design Engineer GivebutterDesign EngineerMNBuild data-driven marketing pages that bring our real campaign and cause data to life: per-cause hubs, per-campaign stories, per-vertical landing pages, with the kind of craft and taste that makes them feel hand-made even when theyre templated. Youll build the marketing experiences that make nonprofits fall in love with Givebutter at first click, partnering with our design team to turn prototypes into production-grade motion, interaction, and web craft.
Specialty Test Engineer (Level 2 or 3) Northrop Grumman CorpSpecialty Test Engineer (Level 2 or 3)Plymouth, MNLeading the industry, this team successfully completes lifecycle support for medium-caliber cannons, develops miniature, precision strike weapons for airborne platforms, creates survivability solutions for soldiers and the next generation tactical ammunition for a variety of combat platforms. • Knowledge in Electrical and Functional Testers with: Interfaces, Pneumatic Systems, Communication protocols, PXI and GPIB instruments test platforms • Work on-site with flexible work arrangement.
Automation and Controls Engineer Koch IncAutomation and Controls EngineerRosemount, MNThe ICE Engineering Team (Instrument, Control, Electrical) is a group of approximately 17 Electrical Engineering professionals that provide design, implementation, and commissioning support for 4000 miles of pipeline, approximately 30 refined fuels and asphalt terminals, and 30 fertilizer terminals. Flint Hills Resources is seeking a self-motivated, entrepreneurial individual with high integrity and strong planning skills to work as an Automation & Controls Engineer to join our Pipelines and Terminals ICE engineering team.
Engineering - Verification Test Engineer (Entry Level) LancesoftEngineering - Verification Test Engineer (Entry Level)Chaska, MN$37.63This role is responsible for instrument maintenance, execution of verification protocols, and configuration management of test instruments. The position requires hands on work in the lab and close collaboration with engineering, quality, and test method development teams.
Project Engineer Claros Technologies Inc.Project EngineerMinneapolis, MN$100,000–$130,000 / yearThe Engineer III works closely with Sales Engineering and external partners to deliver safe, efficient, and high-quality solutions that enable sustainable and responsible PFAS management. • Support and execute experimental testing, pilot trials, and performance evaluations of PFAS destruction technology, analyzing pilot data and recommending process or design optimizations.
Senior Test Engineer Distinctive Staffing SolutionsSenior Test EngineerMinneapolis, MNLead the design, programming, and documentation of control and acquisition projects using National Instruments software and hardware, including PXI, RIO, and FPGA architectures. Proficiency in operating mechanical and electrical test equipment such as multimeters, oscilloscopes, and tensile testing machines.
Automation and Controls Engineer Flint Hills ResourcesAutomation and Controls EngineerRosemount, MNFull timeThe ICE Engineering Team (Instrument, Control, Electrical) is a group of approximately 17 Electrical Engineering professionals that provide design, implementation, and commissioning support for 4000 miles of pipeline, approximately 30 refined fuels and asphalt terminals, and 30 fertilizer terminals. Your Job Flint Hills Resources is seeking a self-motivated, entrepreneurial individual with high integrity and strong planning skills to work as an Automation & Controls Engineer to join our Pipelines and Terminals ICE engineering team.
Newsenior-mechanical-engineer-refrigeration-multiple-locations Burns & McDonnellsenior-mechanical-engineer-refrigeration-multiple-locationsSt Paul, MN$150,000–$210,000 / yearDescription The Senior Mechanical Engineer will lead mechanical design project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including food & beverage, life sciences, and industrial manufacturing. Bachelor Degree in Mechanical Engineering or related degree from an ABET accredited program and 7 years mechanical engineering experience.
Senior Mechanical Engineer Danaher CorpSenior Mechanical EngineerChaska, MN$100,000–$120,000 / yearThe amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. It would be a plus if you also possess previous experience in: Mechanical systems design, build, and test experience in machine automation, robotics, liquid handling, fluidics, or laboratory instrumentation.
E&I Engineer ALTEN Technology USAE&I EngineerMinnetonka, MN$90,000–$140,000 / yearSelect equipment and design complex low voltage industrial control systems in compliance with UL and CEC for water treatment facilities, some with Class 1 Div 2 areas, (single line diagrams/load lists, I/O lists, panel design and schematics, and network architectures) with operator and equipment safety in mind with high quality. We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles.
Automation Engineer ALTEN Technology USAAutomation EngineerMinnetonka, MN$90,000–$140,000 / yearRead, interpret, and comment on engineering documents, including Controls, P&IDs, GAs, process design guidelines, Electrical Schematics, I/O Lists, Instrument and Automated Valve Lists, Network Architecture. We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles.
Systems Test Engineer Elucent MedicalSystems Test EngineerEden Prairie, MinnesotaJob Title: Systems Test Engineer Department: Development Reports to: Director of Systems and Performance Work Location: In Person - Eden Prairie, MN Pay Range: $65,000 - $75,000 About Elucent Medical: Elucent Medical is a medical device company focused on developing surgical navigation technologies, particularly for cancer surgery, to improve patient outcomes through precision and efficacy. Qualifications Education and Experience: Required: Bachelor’s degree in Engineering, Biomedical Engineering, Electrical Engineering, Mechanical Engineering, Systems Engineering, Computer Science, Physics, Mathematics, or a related technical field.
NewGraduate Engineer, Water/Wastewater WSB and AssociatesGraduate Engineer, Water/WastewaterSaint Paul, MNWSB was founded on the understanding that culture drives results, and we've dedicated ourselves to the value of strong relationships, collaboration, and forward-thinking ideas. We inspire each other to discover thoughtful and creative solutions that look beyond the needs of today to the opportunities of tomorrow.
Automation Controls Engineer DARCEO IncAutomation Controls EngineerMinneapolis, MNDepending on their specific assignment, he/she may be a stand-alone contributor who can lead small scale automation projects, provide automation support within a specific area, or provide validation support for automation projects. If assigned as Area lead; Provide support for process issues, troubleshooting, continuous improvement projects, system administration, and providing point of contact to Operations personnel.
Project Engineer - Facilities and Infrastructure Scientific Research CorporationProject Engineer - Facilities and InfrastructureRosemount, MinnesotaFull timeUnder the oversight of the Program Manager and Chief Engineer and in coordination with each Test Facility Lead Engineer, the candidate will: Technical Oversight and Contractor Accountability Serving as the Owners Representative and primary technical advisor to the Contracting Officer Representative (COR), overseeing the design-build prime contractor’s design and execution of the campus buildings and support infrastructure (MEP/central utilities, office space, maintenance shops, etc.) supporting new hypersonic test equipment. Representing the government program office while attending contractor-chaired Integrated Product Team (IPT) meetings, Technical Interchange Meetings (TIMs), technical design reviews, and milestone reviews applying subject matter expertise to provide insights on facility design and constructability and communicate government questions and concerns to the contractor.
Hypersonic Wind Tunnel Lead Engineer REMOTE Scientific Research CorpHypersonic Wind Tunnel Lead Engineer REMOTERosemount, MNRemoteWe are seeking an experienced Test Facility Lead Engineer to provide comprehensive technical oversight for the design, integration, operation, and maintenance of new and existing large-scale hypersonic ground test capabilities while providing technical leadership to ensure that once functional, the facility and its systems operate safely, reliably, and in alignment with performance requirements. Representing the government program office while attending contractor-chaired Integrated Product Team (IPT) meetings, Technical Interchange Meetings (TIMs), technical design reviews, and milestone reviews applying subject matter expertise to provide insights and communicate government questions and concerns to the contractor.
NewRegional Electrical Integrity Engineer Macpower Digital Assets Edge Private LimitedRegional Electrical Integrity EngineerWayzata, MN$120,000–$145,000 / yearIn this role, you will contribute to improve activities related to Electrical, Instrumentation and Automation engineering to enable projects and improve our capabilities by providing engineering support for the organization. Identify opportunities and bridge Electrical, Instrumentation and Automation engineering gaps in applications by establishing auditing control mechanisms.
Lead Electrical Engineer Ecolab IncLead Electrical EngineerEagan, MNBachelors degree in Electrical Engineering, Computer Engineering or related field and 6 years of related experience in electrical engineering circuit design; or Masters degree in Electrical Engineering, Computer Engineering or related field and 4 year(s) of experience in electrical engineering circuit design. The Equipment & Connected Solutions team, part of Ecolabs Research, Development and Engineering organization, designs innovative control, dispensing, and sensor instrumentation systems to improve customer value, user experience, and safety.
Senior CQV Engineer / Validation Lead Validation & Engineering Group, IncSenior CQV Engineer / Validation LeadChaska, MNRemoteValidation & Engineering Group, Inc. (V&EG) a Pinnaql company is a leading services supplier who provides solutions for the Pharmaceutical, Biotechnology, Chemical, Food, and Medical Devices industries in the following areas: Laboratory, Compliance, Computer, Engineering, Project Management, Validation, and other services. This is a hands-on role requiring the individual to independently develop validation documentation, execute qualification protocols, manage deviations, analyze results, and prepare final reports while coordinating activities with Engineering, Manufacturing, and Quality teams.