NewOrdnance Electric Support Technician DCS CorpOrdnance Electric Support TechnicianPatuxent River, Maryland$66,511–$113,255 / yearThe Ordnance Electrical Technician Level III will support the Ordnance Electronics Lab under the Naval Test Wing Atlantic, a vital component of the Naval Air Warfare Center Aircraft Division (NAWCAD). In this part-time role with flexible work hours, you will perform critical modification, instrumentation, and configuration of BRU-32 equipment to enable essential weapons testing across multiple platforms, primarily focusing on the F/A-18.
NewElectrical & Instrumentation Technician W. R. GraceElectrical & Instrumentation TechnicianBaltimore, MDThe ideal candidate has a high school diploma, at least 5 years of industrial experience, and is capable of working in a high hazard environment, including using PPE.Preferred qualifications include technical certification in Electrical or related fields and certifications such as ISA CCST.#J-18808-Ljbffr. The role involves maintaining and troubleshooting electrical distribution and control systems, ensuring compliance with safety protocols.
NewElectrician & Instrumentation Technician W. R. GraceElectrician & Instrumentation TechnicianBaltimore, MDMust be willing to wear PPE (Personal Protective equipment) including but not limited to hard hat, protective eyewear, steel-toed boots, hearing protection, Level A suit, full face respiratorRequired QualificationsHigh school diploma or general education degree (GED)Minimum 5 years related experience in industrial settingSuccessful completion of all testing and training requirements to meet the 1st Class Instrumentation & Electrician Technician classificationPreferred QualificationsAssociate degree or technical certification in Electrical, Instrumentation, Automation, or related field. This position is responsible for maintaining, troubleshooting, installing, testing, and repairing low, medium, and high voltage electrical distribution systems, process control systems, motor control systems, electrical infrastructure, and equipment.
Instrumentation & Control Panel Technician Dexterra Group IncInstrumentation & Control Panel TechnicianBeltsville, MDThe Instrumentation & Control Panel Technician operates and maintains systems such as HVAC systems, boiler plant systems, water and wastewater systems, building automation systems, electrical substations control systems, emergency power systems (generators and automatic transfer stations) at the CMI customer site in Beltsville, MD. Systems to be operated/maintained include but are not limited to HVAC systems, boiler plant systems, water and wastewater systems, building automation systems, electrical substations control systems, emergency power systems (generators and automatic transfer stations).
Electrical Technician Amrize LtdElectrical TechnicianMDEmployees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. Document all problem solving efforts related to all repeat problems/issues in order to avoid rework and to establish a history related to that problem/issue.
NewElectrical Technician JF TaylorElectrical TechnicianGreat Mills, MarylandProjects include: the manufacture of high-fidelity simulators and trainers for the most complex aircraft and ground vehicles, the manufacture/installation of aircraft, shipboard, and ground station components and assemblies, the manufacture of complex, flight worthy, fighter-ruggedized, on-board instrumentation, and. We are looking for motivated individuals seeking hands-on opportunities with growth opportunities in a fully operational production facility working with an experienced design and manufacturing team.
Industrial Automation Controls Technician - Electrical Services Beitzel CorporationIndustrial Automation Controls Technician - Electrical ServicesGrantsville, MarylandFull timeThis is a hands-on role centered on the installation, troubleshooting, commissioning, and maintenance of industrial control systems, including VFDs, drives, motor controls, PLC-based systems, MCCs and related field instrumentation. Position Overview: Beitzel Corporation is seeking an experienced Industrial Automation Controls Technician to support electrical and automation systems in the mining and aggregates industries.
WWW Instrumentation Technician II - Department of Public Works City of BaltimoreWWW Instrumentation Technician II - Department of Public WorksBaltimore, MD$62,095–$101,206 / yearAn WWW Instrumentation Technician II installs, maintains and repairs complex electronic, instrumentation, hydraulic and mechanical equipment in treatment plants, pumping stations, elevated tanks, and related facilities. LICENSES, REGISTRATIONS AND CERTIFICATES: Have a valid Maryland Class C Noncommercial driver's license, or an equivalent out-of-state driver's license acceptable to the Office of Risk Management is required.
Electrician and Automation Technician Dreyer's Grand Ice Cream IncElectrician and Automation TechnicianLaurel, MD$42.19–$49.27 / hourComplete Shift Hand Off- (Show), communicate with prior and/or relieving operator to discuss any line issues, Ensure that all E-Stops, Machine and People Guards and like devices have be tested and are operational according to Laurel Operations Center (LOC), Safety, Health and Environment (SHE) minimum requirements and log information in appropriate database. With nearly 100 years of winning experience in the U.S, a robust portfolio of powerhouse brands that consumers know and love such as Häagen-Dazs, Drumstick, Dreyer's & Edy's, Skinny Cow and Outshine, and the backing and coaching of European-based ice cream experts, we know we have the winning recipe.
NewAssociate Test and Evaluation Laboratory Technician BoeingAssociate Test and Evaluation Laboratory TechnicianPatuxent River, MarylandThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Electrical Engineer, Design JF TaylorElectrical Engineer, DesignGreat Mills, MarylandTasking will consist of the following: Electrical engineering design, integration, and test of electrical interfaces for power distribution systems, I/O systems, real-time audio and visual systems, digital data networks, and for the integration aircraft avionics such as Mission Computers, Flight Management Computers, Vehicle Management Computers, Multi-Function Displays, Control Display Units, Cyclics, Collectives, Pedals, Flight Control Surface Actuators, FLIRs, Navigation Systems, Weapons Systems, Terrain Avoidance and Ground Proximity Warning Systems into simulators, trainers, and labs. Aircraft/Shipboard Mod/Prototype/Parts Design Engineer (Electrical): Design, manufacture, and installation of aircraft, shipboard, and ground station components, piece parts, and assemblies including aircraft prototype systems, aircraft modifications, aircraft part kits installations, and Unmanned Aircraft Systems ground control stations.
Mechanical Electrical Plumbing Inspector - Aviation & Infrastructure - PA/MD/NJ/DE* Cmts LLCMechanical Electrical Plumbing Inspector - Aviation & Infrastructure - PA/MD/NJ/DE*Baltimore, MD$85,000–$105,000 / yearTwo year associates degree in Civil/Mechanical/Electrical Engineering Technology and three years experience in field inspections and the proposed inspector shall be able to get either of the following within two: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction. High school diploma or GED and 5 years experience in field inspections and any one certification of the following: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction.
I&E Technician Tourgee & Associates IncI&E TechnicianBaltimore, MD$48.24–$50.82 / hourUses various test equipment such as current meters, multimeter, megger, ultrasound, data loggers, calibration meters and other test equipment to troubleshoot/maintain electrical and instrumentation process equipment integrity. Disconnects, reconnects, installs, removes, troubleshoots, and generally maintains motor control, process control, burner control, and electrical distribution devices and Instrumentation systems.
Industrial Engineering Technician (Millwright) Alakaina Foundation Family of CompaniesIndustrial Engineering Technician (Millwright)Frederick, MDREQUIRED SKILLS AND EXPERIENCE: Minimum three (3) years'''' experience performing a variety of duties in a variety of trades to include, but not limited to sheet metal work, steam fitting, fabrication, hydraulics, hot/cold water systems, electrical condensate pumps, pressure powered pumps, heat recovery pumps, vacuum pumps, instrument air, breathing air and laboratory air systems. Conducts a variety of duties which include numerous skills in a variety of trades to include, but not be limited to sheet metal work, welding, steam fitting, fabrication, hydraulics, hot/cold water systems, electrical condensate pumps, pressure powered pumps, heat recovery pumps, vacuum pumps, instrument air, breathing air and laboratory air systems.
NewMaintenance Technician American Water Works Co IncMaintenance TechnicianMD$18.50–$33.60 / hourMaintains computerized and manual records and prepares reports pertaining to the operation of the water distribution & collection systems, reviews daily work orders, completes daily reports, and makes changes as required to meet operating requirements. Effectively and safely operates hand tools, pneumatic tools, air compressors and other small equipment related to the maintenance trades and water distribution and wastewater collection systems operations.
Commercial/Industrial Burner Technician Exigent MechanicalCommercial/Industrial Burner TechnicianGlenn Dale, MarylandAbout ACI American Combustion Industries (ACI) is a full-service facility support contractor that provides a wide variety of mechanical services to industrial, commercial, and institutional customers in Maryland, Washington DC, and Virginia. Our reputation for reliable customer service, quality service, and installation is reflected in our long track record of providing high-quality products and services and our willingness to go the extra mile for our customers.
Lead Facility Technician ATCCLead Facility TechnicianGaithersburg, Maryland$85,000–$90,000 / yearFull timeEquipment Installation and Workspace Support: Install, assemble, adjust, relocate, and repair office, laboratory, and repository equipment, furnishings, shelving, workstations, and other operational assets using manuals, drawings, and technical documentation. Facility Systems Maintenance: Maintain and repair facility systems including electrical, mechanical, plumbing, HVAC, refrigeration, and other building infrastructure supporting daily operations and temperature-controlled environments.
Lead Facility Technician American Type Culture CollectionLead Facility TechnicianGaithersburg, MD$85,000–$90,000 / yearFacility Maintenance and System Oversight: Lead the oversight, monitoring, and execution of preventative maintenance and repairs on facilities systems, including advanced maintenance and repair of electrical, mechanical, HVAC, and refrigeration systems supporting temperature-controlled environments (e.g., biorepository storage units, cold rooms, and environmental management systems). Work Order and Repair Coordination: Receive and fulfill work orders and service calls, applying advanced judgment to triage and prioritize critical repairs while coordinating with internal teams and external technicians.
Field Service Technician - Industrial Systems SagentField Service Technician - Industrial SystemsBaltimore, MarylandAs a Field Service Technician, you will perform scheduled service calls, emergency repairs, and equipment installations for commercial equipment such as scales, slicers, ovens, wrapping stations, and packaging machinery commonly used in grocery stores, delis, and similar retail environments. Technicians must meet all field-specific requirements, including technical proficiency, demonstrated field readiness, a clean driving record, and eligibility to satisfy any required exams, certifications, or licensing applicable to field service work within their assigned region.
NewInstrument & Calibration Technician Agilent TechnologiesInstrument & Calibration TechnicianFrederick, MarylandInstrument types include a variety of technologies supporting manufacturing of clinical and commercial pharmaceutical API: Conductivity, pH, Total Organic Carbon, Temperature, Pressure, Flow (incl. Provides technical support as Metrology subject matter expert (SME) for engineering projects towards improvement of processing equipment, utilities, and facilities instrumentation.
Field Technicians Graham Personnel ServicesField TechniciansClarksburg, MD$25–$40 / hourWe design and support advanced high-purity water systems used in industries where precision matters most—pharmaceutical manufacturing, life sciences research, semiconductor/electronics, and industrial power generation. What You’ll Do As a Field Service Technician, you will be the trusted expert ensuring our customers’ water systems operate at peak performance: Perform preventative and corrective maintenance on high-purity water systems.
Operating Technician NAES CorporationOperating TechnicianAquasco, MD$30.62–$59.43 / hourPart timeKnowledge of power plant mechanical and electrical systems—including motors, pumps, boilers, fluid systems, chemical handling equipment, water treatment systems, pollution control systems, and AC/DC electrical distribution and control systems—is required, along with associated maintenance functions. Some duties may require the use of protective equipment, which can include hard hats, safety glasses, and eye protection, air masks/respirators, ear protection, chemical suits, flame-resistant clothing (FRC), hot gloves, high-voltage protective gear, and fall protection.
Biomedical Equipment Technician (BMET) III- Lead/Scheduler Capital I, LLCBiomedical Equipment Technician (BMET) III- Lead/SchedulerJoint Base Andrews, MD$80,000–$100,000 / yearThe Biomedical Equipment Technician (BMET) - Level III Alternate Program Manager Ctr (BMET Lead/Scheduler) serves as the senior technical and operational lead responsible for managing, scheduling, and coordinating all biomedical maintenance activities within the program. This role encompasses the full range of biomedical maintenance, inspection, calibration, diagnostics, and repair of medical and non-medical support equipment, while also providing leadership, project management, and scheduling oversight for assigned personnel and tasks.
Industrial Electrician - E&I Technician Synagro Technologies IncIndustrial Electrician - E&I TechnicianBaltimore, MD$35–$45 / hourThe worker is subject to hazards: Includes a variety of physical conditions such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to. The workers frequently is in close quarters, crawl space, shafts, manholes, small, enclosed rooms, small sewage and water line pipes, and other areas which could cause claustrophobia.
Clinical Engineering Technician II MedStar HealthClinical Engineering Technician IIBaltimore, MD$28.76–$48.96 / hourUnder the general direction of the Clinical Engineering leadership team the Clinical Engineering Technician II is primarily responsible for maintaining clinical equipment and systems considered to be advanced specialty highly sophisticated integrated technology or requiring manufacturer service training or certification through the effective use of the medical equipment management plan while adhering to all medical equipment policies and procedures and manufacturer or alternative equipment maintenance (AEM) specifications. related military work/training in mechanical or electrical engineering or academic work or actual work experience aligned with AAMI's Core Competencies for the Biomedical Equipment Technician required.
Field Service Technician (Hydraulics) Slb NVField Service Technician (Hydraulics)Laurel, MDWhat You Will Do: Executes the commissioning and decommissioning of multiplex pump skids and components at oil and gas well sites for use on Jet Pump artificial lift, Salt Water Disposal (SWD) Systems, and other facilities. Minimum Qualifications: 2 years of experience as a field service mechanic troubleshooting and repairing multiplex pumps and jet pump artificial lift systems.
Clinical Engineering Technician II MedStar Health Research InstituteClinical Engineering Technician IIBaltimore, MD$28.76–$48.96 / hourUnder the general direction of the Clinical Engineering leadership team the Clinical Engineering Technician II is primarily responsible for maintaining clinical equipment and systems considered to be advanced specialty highly sophisticated integrated technology or requiring manufacturer service training or certification through the effective use of the medical equipment management plan while adhering to all medical equipment policies and procedures and manufacturer or alternative equipment maintenance (AEM) specifications. related military work/training in mechanical or electrical engineering or academic work or actual work experience aligned with AAMI's Core Competencies for the Biomedical Equipment Technician required.
Maintenance Technician ABM IndustriesMaintenance TechnicianWheaton-Glenmont, MD$22–$25 / hourFull timeQualifications:Experience with electrical and HVAC systems a PLUSA minimum of 2-3 years of experience in general maintenance Computer skills at a level to interact with the building and Able Engineering Services’ computerized systems in placeCertification meeting OSHA ACM awareness training requirementsDemonstrates commitment to quality of service. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations.
Technician 2 Becton Dickinson and CoTechnician 2Sparks, MD$27.90–$44.60 / hourWaters collaborates with analytical laboratories around the world to advance the release of effective, high-quality medicines, assure the safety of food and water, and drive better patient outcomes by detecting diseases earlier, managing routine infections, and combatting growing antibiotic resistance. Relevant Fields: Electrical / Electronics Technician, Electromechanical Technician, Mechanical Engineering Technician, Industrial Programmer, Electrician, Machine Builder / Repairer, Machinist, Refrigeration Mechanic, Welding Repairer.
Industrial Electrician - E&I Technician *** $3,000 New Hire Payment *** Synagro WWT, Inc.Industrial Electrician - E&I Technician *** $3,000 New Hire Payment ***Baltimore, MD$35–$45 / hourPart timeThe worker is subject to hazards: Includes a variety of physical conditions such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to. The workers frequently is in close quarters, crawl space, shafts, manholes, small, enclosed rooms, small sewage and water line pipes, and other areas which could cause claustrophobia.
Equipment Maintenance Technician 2 Katalyst Healthcares & Life SciencesEquipment Maintenance Technician 2Sparks, MDPerform mechanical, pneumatic and electrical maintenance (including preventive) repairs, adjustments, inspection and monitoring of production and/or facilities related equipment and machinery. Performs routine set up, operation, minor and major routine maintenance, preventative maintenance (PM) and troubleshooting of highly complex/automated manufacturing equipment.
Calibration Technician Tourgee & Associates IncCalibration TechnicianOwings Mills, MD$20–$28 / hourAbility to acquire knowledge of performing calibrations of Calibrations, including autoclaves, incubators, freezers, refrigerators, BMS/BAS systems, Bioreactors, AHU's, CIP/SIP systems, RODI systems, WFI Systems, utility systems, and fermenters. About TAI: TAI brings together engineering, construction, systems integration, on-site services, and technical services - combining proven execution with trusted expertise to support clients across the entire project lifecycle.
Maintenance Technician Niagara WaterMaintenance TechnicianBaltimore, MarylandSkilled in the repair of variable frequency drives, servo motors and controllers, communication systems (asi-bus, can-bus, profi-bus, ethernet), PLC input/output cards, and safety modules. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.
Equipment Maintenance Technician 2 Karwell TechnologiesEquipment Maintenance Technician 2Sparks, MDPerform mechanical, pneumatic and electrical maintenance (including preventive) repairs, adjustments, inspection and monitoring of production and/or facilities related equipment and machinery. Performs routine set up, operation, minor and major routine maintenance, preventative maintenance (PM) and troubleshooting of highly complex/automated manufacturing equipment.
Control Technician 1 - Power Control Systems M.C. Dean IncControl Technician 1 - Power Control SystemsBaltimore, MD$23–$28 / hourJob Summary: The Control Technician 1 is responsible for the fabrication of control panels, field installation and commissioning procedures associated with control panels and field instrumentation, troubleshooting & calibration of field instruments, equipment and control panels, testing and analysis, documentation and updating drawings of finished control panels. • Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials.
Central Sterile Technician II University of Maryland Baltimore Washington Medical CenterCentral Sterile Technician IIMD$21.27–$34.62 / hourDisassembles, cleans, and inspects instrument sets and trays: • Pre-treats with hospital-approved detergent/germicide • Flushes all cannulated instruments • Loads into washer/decontaminator according to manufacturers instructions • Empties and inspects case carts prior to loading in Hamo Cart Washer according to manufacturers guidelines. Performs Bowie Dick and/or Biological tests on steam autoclaves/flash autoclaves and ETO sterilizer: • Reports test results to supervisor and initiates corrective steps as required • Checks screen and parameters • Reruns Bowie Dick test • If second Bowie Dick test - fails, machine is shut down and Biomedical Engineering notified.
Maintenance Technician Niagara Bottling LLCMaintenance TechnicianBaltimore, MD$30.35–$44.01 / hourSkilled in the repair of variable frequency drives, servo motors and controllers, communication systems (asi-bus, can-bus, profi-bus, ethernet), PLC input/output cards, and safety modules. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.
AVIONICS TECHNICIAN III SOC 49-2091 SCA 23183 Kay and Associates, Inc.AVIONICS TECHNICIAN III SOC 49-2091 SCA 23183MDEssential Functions Perform complex aircraft maintenance, inspections, troubleshooting, repair, and modification Document maintenance actions in aircraft logs and approved maintenance systems Lead and provide technical guidance to lower-level mechanics Ensure compliance with Tool Control, FOD, safety, and quality programs Perform other duties as assigned Duties Inspect/troubleshoot/maintain/modify avionics and electrical systems Interpret technical manuals, drawings, and directives Troubleshoot and repair aircraft avionics systems Document maintenance actions per NAMP requirements Qualifications High School Diploma or GED Minimum of six (6) years' experience in the design of instrumentation systems for the collection of test data Aerospace industry or military aircraft experience desired Shall have experience supporting IPTs and ITTs Strong analytical and problem-solving skills are essential Possess excellent computer literacy, including proficiency with Microsoft Office applications Self-motivated and have strong attention to details; be adept at planning and managing resources and meeting milestones Prioritization skills are essential Must be able to work independently and hands-on, yet also possess strong teamwork skills Possess the ability to work well with engineers, technicians, Contractors, vendors, and end-user customers Must have a working knowledge of aircraft instrumentation systems such as those that are designed, but not limited to capture stress and strain, shock and vibration, temperature, position (i.e., aircraft surfaces, landing gear, etc.), noise and pressure measurements 7+ years avionics aviation maintenance experience 5+ years VH-92A, VH-3D, VH-60N or similar aircraft maintenance experience preferred Must be able to work day, swing or mid shift as required Physical Requirements Must be able to perform essential job functions with or without reasonable accommodation, including lifting up to 50 lbs., standing and walking for extended periods, bending, kneeling, climbing, and working in confined or elevated spaces. AVIONICS TECHNICIAN III (SOC: 49-2091 / SCA: 23183) Specialty: Avionics Location: Patuxent River, MD Employment Type: Full-Time | Onsite Clearance: Top Secret w/ Yankee White Access | CAC required Summary Provides support for O, I and D-level tasks in support of Presidential Helicopter platforms in accordance with the Naval Aviation Maintenance Program (NAMP), applicable technical data, and federal contract requirements.
NewSr. Maintenance Technician Niagara BottlingSr. Maintenance TechnicianBaltimore, MD$36.27–$51.69 / hourThe role acts as a subject matter expert on production equipment and supports continuous improvement, training, and best practices aligned with Niagara's maintenance strategies. Collaborate with plant leadership to develop and execute projects involving continuous improvement, upgrades, and resolution of recurring problems.
AVIONICS TECHNICIAN III (SOC: 49-2091 / SCA: 23183) Kay and AssociatesAVIONICS TECHNICIAN III (SOC: 49-2091 / SCA: 23183)Patuxent River, MDFull timeExercises independent judgment in performing tasks such as circuit analyses, calculating wave forms and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers and complex computer control equipment. Must have a working knowledge of aircraft instrumentation systems such as those that are designed, but not limited to capture stress and strain, shock and vibration, temperature, position (i.e., aircraft surfaces, landing gear, etc.), noise and pressure measurements .
Industrial Field Technician ETCHIndustrial Field TechnicianBaltimore, MarylandPrimary Responsibilities include: Operations and System Monitoring Operate, monitor, and troubleshoot the pilot reactor system and associated equipment, including the computer-based control system used to manage reactor operations. ETCH is a startup commercializing a radically new and efficient decarbonization technology for the simultaneous greenhouse gas-free production of hydrogen and solid carbon from natural gas.
Experimental Ballistics Technician Bowhead / UIC Technical ServicesExperimental Ballistics TechnicianAberdeen, MDIndependently set up and prepare weapons, ammunition, and instrumentation for ballistic and check drawings provided by engineers and scientists to determine the adequacy of the drawings for fabrication and successful completion of the associated test. Advanced working knowledge of common laboratory equipment such as shop tools and machinery, equipment mounts, precision measurement tools, electronic sensors, communications cabling, and diagnostic tools such as oscilloscopes.
Electrician Technician Constellation Energy Generation, LLC.Electrician TechnicianLusby, MarylandFull timeUnder general supervision, performs preventive, predictive, and corrective maintenance on electrical (motors and sequential controls), electronic (inverters and radio controlled cranes), and electro-mechanical (circuit breakers and motor operated valves (MOVs)) equipment from 125VDC to 25KVAC for the continuous operation and/or refueling. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
NewVehicle Hardware & Software Technician Applus+ IDIADAVehicle Hardware & Software TechnicianMDAs a TOP Employer certified company, we have a large team of more than 3000 professionals drawn from over 22 countries, as well as an international network of subsidiaries and branch offices in 25 countries which ensures that our clients get customized, added-value solutions. Job Functions: Must be able to stand, walk up and down hills, bend, kneel, sit for lengthy periods, and use hands for various functions such as typing and using various hand tools.
Automation Service Technician - Chantilly, VA Becton Dickinson and CoAutomation Service Technician - Chantilly, VABaltimore, MD$29.70–$47.50 / hourWaters collaborates with analytical laboratories around the world to advance the release of effective, high-quality medicines, assure the safety of food and water, and drive better patient outcomes by detecting diseases earlier, managing routine infections, and combatting growing antibiotic resistance. MINIMUM QUALIFICATIONS: Bachelor's degree in Engineering, Electronic Technology, Computer Science, Biomedical or other related disciplines OR 10+ years of relevant experience in troubleshooting and/or repair of complex electro-mechanical, electronic, computer, or electrical systems in commercial, industrial, or military settings required.
F-35 Avionics & Instrument Technician (2nd or 3rd shift) Lockheed Martin CorpF-35 Avionics & Instrument Technician (2nd or 3rd shift)MD$32.95–$52.23 / hourBasic Qualifications: 3 - 5 years hands - on working experience in a 5 or 7 skill level USAF AFSC, Navy NEC, or USMC MOS Avionics Systems Craftsman discipline, or equivalent commercial experience such an FAA/FCC instrumentation license. This role goes beyond the traditional scope of aircraft maintenance; it immerses you in a world where you will maintain, modify, inspect, and troubleshoot the cutting-edge F-35 aircraft, both scheduled and unscheduled.
F-35 Avionics & Instrument Technician - Multiple Shifts (ECP) Lockheed Martin CorpF-35 Avionics & Instrument Technician - Multiple Shifts (ECP)MD$32.95–$52.23 / hourBasic Qualifications: 3 - 5 years hands - on working experience in a 5 or 7 skill level USAF AFSC, Navy NEC, or USMC MOS Avionics Systems Craftsman discipline, or equivalent commercial experience such an FAA/FCC instrumentation license. This role goes beyond the traditional scope of aircraft maintenance; it immerses you in a world where you will maintain, modify, inspect, and troubleshoot the cutting-edge F-35 aircraft, both scheduled and unscheduled.
Maintenance Technician Clarkwestern Dietrich Building Systems LLCMaintenance TechnicianBaltimore, MDThe ideal candidate will have hands-on experience with Allen-Bradley platforms, industrial networks, and motor control systems, along with the ability to diagnose complex issues and implement effective solutions in a fast-paced manufacturing environment. Core Qualifications: Strong working knowledge of industrial control systems, including PLCs such as Allen-Bradley (ControlLogix, CompactLogix) and/or Siemens.
Test Technician - 2nd Shift Flowserve CorpTest Technician - 2nd ShiftMD$22.40–$33.65 / hourRole Summary: The Test Technician is responsible for supporting all aspects of test lab work including tester design and construction, test operation, instrumentation and measurement, procurement of test materials, test lab projects, and maintenance of laboratory files and records. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally.
Operating Room Technician (Surgical Technologist) University of Maryland Baltimore Washington Medical CenterOperating Room Technician (Surgical Technologist)MD$33.68–$43.28 / hourLocated in Largo in the heart of Prince George's County, our new state-of-the-art regional medical center (UM Capital Region Medical Center) will provide improved access to primary and ambulatory care services, and serve as a tertiary care center for critically ill patients. Follows communication protocols to both internal and external customers, including introducing him/herself with job title and experience, asking open-ended questions, such as "How may I be of help to you?" using the customer's name as soon as it is learned.