UNKNOWN

FEED

Position Purpose: The primary purpose of this HVAC Service Technician is to provide preventative maintenance, start-up, warranty, and repair services on light commercial and industrial air conditioning equipment. Frequent exposure to wet and/or humid conditions, elevated and/or precarious work places, fumes or airborne particles, outside weather conditions, risk of electrical shock and vibration.

Hoffman Mechanical Solutions Inc

HVAC Service Technician

Position Purpose: The primary purpose of the Variable Refrigerant Service Technician is to provide job site surveys during equipment installation, startup/commissioning of new equipment and systems, warranty service, owner direct preventative maintenance, and troubleshooting/repair services on variable refrigerant air conditioning equipment. This position requires frequent working outdoors, inside mechanical/equipment rooms, regularly being exposed to extreme inside/outside weather conditions to include extreme hot and/or extreme cold.

VRV Service Technician

Showing superior technical skill and competence, perform, instruct, and oversee repair of mech and elect assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, eng dispositions, and other authorized maintenance data. Responsibilities include advanced interpretation and application of technical data such as the Aircraft Structural Repair Manual (SRM) and Aircraft Maintenance Manual (AMM), leading complex repairs and damage assessments, and providing guidance to technicians across all skill levels.

Gulfstream Aerospace Corporation

Senior Aircraft Component Repair Technician for Structures

Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, wattmeters, spectrum analyzers, and borescopes.

Aircraft Component Repair Technician 3 - Structures

Communicates with service advisor and foreman immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Employees come first at The Pete Store because we believe that the better we take care of our employees, the better they will take care of our customers.

The Pete Store

Mobile Diesel Service Technician (Tuesday-Saturday 12:00-8:30 PM)

Showing superior technical skill and competence, perform, instruct, and oversee repair of mech and elect assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, eng dispositions, and other authorized maintenance data. Position Purpose: Working with a high degree of independence, provide leadership and technical guidance while performing the repair and overhaul of internal and external aircraft assemblies, subassemblies and components in accordance with GAC Repair Station requirements.

Senior Aircraft Component Technician for CNC or Conventional Machining

As part of our commitment in creating a fair, efficient, and consistent hiring process we may use artificial intelligence (AI) to help our recruiting teams organize, summarize, and analyze information provided by candidates, including resumes, application responses, and other materials submitted during the application process. We will strive to be the best overall partner supplier to all our clients, to provide opportunity for every employee to reach their full potential and maintain sustained profitability through honesty, integrity and doing the right thing.

Material Handling Inc.

Shop Service Technician

ea_via_bold

What You Will Do : Performs repairs / rework on Collins Aerospace nacelle products (Inlet Cowls, Fan Cowls, Thrust Reversers, Aprons, and Engine Build Up) to support the G400 flight test program. The Staff Technician/ Flight Test Mechanic will primarily perform nacelle structural retrofits, repairs, and rework for hardware at Gulfstream’s Savannah facilities.

Staff Technician/Flight Test Mechanic (Onsite)

LiftOne invests in people, facilities and innovative technology as part of the essential role we play in supporting our country's supply chain and enabling critical goods to be delivered to homes and businesses. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear.

Weisiger Group

Dock & Door Technician

Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program. We empower and uplift each other by working together, take responsibility for doing the right thing, and believe there is no limit to our potential when we grow together across Environmental Services, Patient Transportation, Patient Observation, Facilities Management, Healthcare Technology Solutions, Ambulatory Services, and Sterile Processing.

HOUR

Compass Group USA Inc

Floor Technician (Part Time)

About Thompson Industrial: Thompson Industrial, powered by Clean Harbors, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. Thompson Industrial is looking for Hydroblaster/ Field Technicians, This Technician will be responsible for the safe & proper execution of Thompson Industrial jobs across all services lines.

Clean Harbors is North America’s leading provider of environmental, energy and industrial services. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, across the chemical, energy, manufacturing and additional markets, as well as numerous government agencies. These customers rely on Clean Harbors to deliver a broad range of services such as end-to-end hazardous waste management, emergency spill response, industrial cleaning and maintenance, and recycling services. Through its Safety-Kleen subsidiary, Clean Harbors also is North America’s largest re-refiner and recycler of used oil and a leading provider of parts washers and environmental services to commercial, industrial and automotive customers. Founded in 1980 and based in Massachusetts, Clean Harbors operates throughout the United States, Canada, Mexico and Puerto Rico.

Clean Harbors Inc

IS Technician

Be part of a team to assist with the installation of multiple different low-voltage systems including: Cat6/Fiber cabling installations and terminations, PLC placement and basic signal wiring, OCR structures and infrastructure installation, Cameras, Remote Kiosks, and Traffic Signal Loops. The ComTran Group is connecting the Southeast as a Regional Leader in the Utility Infrastructure Sector through expanded partnerships and services, while upholding the highest excellence in quality.

Quanta Services Inc

Low Voltage Technician Savannah Georgia Location

ADAPTED_NOW

The Simulator Technician successfully completes diverse tasks of the job; applies and enhances knowledge and skill in both usual and unusual issues; may need some guidance in addressing unusual situations. Any offer of employment is contingent upon successful completion of required compliance reviews, including verification that the candidate is not prohibited from employment under U.S. economic sanctions programs administered by the U.S. Department of the Treasury’s Office of Foreign Assets Control (OFAC).

<p>Aviation professionals from around the world trust FlightSafety International to provide the  highest quality training and outstanding service. Our professional instructors deliver aircraft-  and mission-specific courses, using our comprehensive training systems and advanced- technology flight simulators designed to enhance safety. Trust your training to FlightSafety. </p>

FlightSafety International

Simulator Technician (Savannah, GA, US, 31408)

The Clients first impression of the service and support UBEO provides is critical to our business relationship and Client loyalty and as such, this individual is expected to efficiently execute setup procedures and maintain strict quality control of the products intended for delivery. UBEO Business Services, the premier provider of business technology products and services, is seeking to hire a Setup Technician / Delivery Driver to join our team!

UBEO Business Services

Setup Technician/Delivery Driver

As one of the largest chemical companies in North America we have been finding solutions for your everyday needs and addressing the most complex economic, environmental, and sustainability challenges for more than 150 years! The primary function of this job is to ensure proper maintenance within the facility and to ensure timely productionof highquality products in a cost efficient, safe and environmentally responsible manner.

BASF SE

Maintenance Technician

Material handling demands include lifting from floor level to overhead, with occasional lifting up to 115 lbs., frequent lifting up to 50 lbs., and constant lifting up to 25 lbs., placing the position in the Very Heavy Physical Demand Classification (PDC). The associate is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; risk of electrical shock (high voltage); and vibration.

Brady Services

Boiler Technician II

GreenHouseAPI

Our Geotechnical team in Hilton Head (Bluffton), SC & Savannah, GA is looking for a CMT Technician to perform field observation, inspection, testing, and sampling of soil, aggregates, concrete, grout, masonry, and asphalt pavement. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: Data Collection and Analysis: Perform basic data entry tasks, including data verification.

GHD Group Pty Ltd

Construction Materials Testing (CMT) Technician

Requesting Information About the AEDT - NYC Local Law 144: Candidates who reside in New York City and are subject to NYC Local Law 144 may request information about the AEDT, including details on the type of data collected, the sources of such data, and our data retention policies. Job Qualifications and Characteristics Assessed: The AEDT evaluates candidates based on job qualifications and characteristics pertinent to the role, including skills, experience, and competencies relevant to the position requirements.

FirstService Corp

Roving Maintenance Technician

All independently owned and operated franchised businesses operate under the service brands’ marks, trademarks, trade names, logos, emblems, slogans, or other indicia of origin in connection with the Aire Serv® franchise system within a specified geographical area. People like you make what the Aire Serv franchise owners do possible and creating a team that shares and exemplifies our values is as important as providing quality service for heating and cooling systems.

Aire Serv

HVAC Service Professional Technician

Other Skills and Abilities: Excellent communication skills, ability to handle multiple tasks, organize, and prioritize workload, excellent internal customer service skills. · To perform assigned duties the following will occur: Standing on your feet for long periods of time, walking, lifting, climbing, inspecting equipment with a flashlight, and looking down into equipment.

Information Technician Jobs in Savannah, GA

HVAC Service Technician Hoffman Mechanical Solutions Inc

VRV Service Technician Hoffman Mechanical Solutions Inc

Senior Aircraft Component Repair Technician for Structures Gulfstream Aerospace Corporation

Aircraft Component Repair Technician 3 - Structures Gulfstream Aerospace Corporation

Mobile Diesel Service Technician (Tuesday-Saturday 12:00-8:30 PM) The Pete Store

Senior Aircraft Component Technician for CNC or Conventional Machining Gulfstream Aerospace Corporation

Shop Service Technician Material Handling Inc.

Staff Technician/Flight Test Mechanic (Onsite) RTX

Dock & Door Technician Weisiger Group

Floor Technician (Part Time) Compass Group USA Inc

IS Technician Clean Harbors Inc

Low Voltage Technician Savannah Georgia Location Quanta Services Inc

Simulator Technician (Savannah, GA, US, 31408) FlightSafety International

Setup Technician/Delivery Driver UBEO Business Services

Maintenance Technician BASF SE

Boiler Technician II Brady Services

Construction Materials Testing (CMT) Technician GHD Group Pty Ltd

Roving Maintenance Technician FirstService Corp

HVAC Service Professional Technician Aire Serv

Quality Technician SIGMA-US

Similar Job Searches

See More Jobs

Stand out to leading employers.